Physical Chemistry Commons^™

Spectroscopic Properties Of The Astrochemical Molecules [Al, O, Si]X (X = 0, +1), Jacqueline M. Friskey, Vincent J. Esposito, Tarek Trabelsi, Joseph S. Francisco

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Aluminum and silicon are present in large quantities in the interstellar medium, making the triatomic species consisting of both elements intriguing with regard to the foundations of astrochemistry. Spectroscopic parameters have been calculated via high-level ab initio methods to assist with laboratory and observational detection of [Al, O, Si]^x(x = 0,+1). All [Al, O, Si]M^x(x = 0,+1) isomers exist in the linear geometry, with linear AlOSi (X ²Π) and linear AlOSi⁺ (X¹Δ) being the most stable neutral and cationic species, respectively. Formation of the neutral species most likely occurs via reaction of …

Solvation Of Large Polycyclic Aromatic Hydrocarbons In Helium: Cationic And Anionic Hexabenzocoronene, Miriam Kappe, Florent Calvo, Johannes Schöntag, Holger F. Bettinger, Serge Krasnokutski, Martin Kuhn, Elisabeth Gruber, Fabio Zappa, Paul Scheier, Olof E. Echt

Faculty Publications

The adsorption of helium on charged hexabenzocoronene (Hbc, C₄₂H₁₈), a planar polycyclic aromatic hydrocarbon (PAH) molecule of D_6h symmetry, is investigated by a combination of high-resolution mass spectrometry and classical and quantum computational methods. The ion abundance of He_nHbc⁺ complexes versus size n features prominent local anomalies at n = 14, 38, 68, 82, and a weak one at 26, indicating that for these “magic” sizes the helium evaporation energies are relatively large. Surprisingly, mass spectra of anionic He_nHbc^– complexes feature a different set of anomalies, namely at …

Investigation Of Carbon Dioxide Oxidation Reaction Pathways On Rh(111) Via Reflection Absorption Infrared Spectroscopy (Rairs), Elizabeth A. Jamka

Dissertations

CO oxidation, RAIRS, Rh(111), Surface Science, UHV

Converting Hydrazone-Based Photoswitches Into Functional Materials, Sirun Yang

Dartmouth College Ph.D Dissertations

The development of new classes of molecular switches with enhanced performance and brand-new functionalities enables practitioners to push the frontiers of adaptive materials. In the realm of photoswitches, the bistability of hydrazones (i.e., molecules that incorporate the C=N-NH functional group) allows for the kinetic trapping of polymer and supramolecular assemblies resulting in multistate actuation and emergent phenomena that are not tractable with other photoswitches. This property has transformed hydrazone photoswitches into powerful tools that can be used in understanding fundamental molecular interactions and how to apply them in modulating the physicochemical properties of materials.

Progressing from disordered to …

Estimation Of The Bubble Point Pressure Of Multicomponent Reservoir Hydrocarbon Fluids, Benjamin Sunday Usen, Chidi Obi

Makara Journal of Science

This study developed a novel C-sharp (C#) programming language for the estimation of bubble point pressure (BPP) of various hydrocarbon mixtures at equilibrium state. The methodology was based on vapor–liquid equilibrium calculation using Peng Robinson equation of state implementation, thermodynamic equilibrium calculation and Newton-Raphson’s method for the successive substitution of the unknown variables. The equal fugacity constraint can be satisfied by obtaining the equilibrium which serves as a criterion for two or more phases to exist at equilibrium. The problem was resolved by searching for a pressure that will satisfy the two constraints. Complex calculation was performed by successively substituting …

Symmetry-Resolved Co Desorption And Oxidation Dynamics On O/Ru(0001) Probed At The C K-Edge By Ultrafast X-Ray Spectroscopy, Jerry Larue, Boyang Liu, Gabriel L. S. Rodrigues, Chang Liu, Jose Antonio Garrido Torres, Simon Schreck, Elias Diesen, Matthew Weston, Hirohito Ogasawara, Fivos Perakis, Martina Dell'angela, Flavio Capotondi, Devon Ball, Conner Carnahan, Gary Zeri, Luca Giannessi, Emanuele Pedersoli, Denys Naumenko, Peter Amann, Ivaylo Nikolov, Lorenzo Raimondi, Carlo Spezzani, Martin Beye, Johannes Voss, Hsin-Yi Wang, Filippo Cavalca, Jörgen Gladh, Sergey Koroidov, Frank Abild-Pedersen, Manuel Kolb, Piter S. Miedema, Roberto Costantini, Tony F. Heinz, Alan C. Luntz, Lars G. M. Pettersson, Anders Nilsson

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

We report on carbon monoxide desorption and oxidation induced by 400 nm femtosecond laser excitation on the O/Ru(0001) surface probed by time-resolved x-ray absorption spectroscopy (TR-XAS) at the carbon K-edge. The experiments were performed under constant background pressures of CO (6 × 10⁻⁸ Torr) and O2 (3 × 10⁻⁸ Torr). Under these conditions, we detect two transient CO species with narrow 2π* peaks, suggesting little 2π* interaction with the surface. Based on polarization measurements, we find that these two species have opposing orientations: (1) CO favoring a more perpendicular orientation and (2) CO favoring a more parallel orientation …

Preface To Special Issue On Water Electrolysis For Hydrogen Production, Li Li, Jin-Song Hu, Zi-Dong Wei

Journal of Electrochemistry

No abstract provided.

Recent Development Of Low Iridium Electrocatalysts Toward Efficient Water Oxidation, Jing Ni, Zhao-Ping Shi, Xian Wang, Yi-Bo Wang, Hong-Xiang Wu, Chang-Peng Liu, Jun-Jie Ge, Wei Xing

Journal of Electrochemistry

Developing high-performance and low-cost electrocatalysts for oxygen evolution reaction (OER) is the key to implementing polymer electrolyte membrane water electrolyzer (PEMWE) for hydrogen production. To date, iridium (Ir) is the state-of-the-art OER catalyst, but still suffers from the insufficient activity and scarce earth abundance, which results in high cost both in stack and electricity. Design low-Ir catalysts with enhanced activity and stability that can match the requirements of high current and long-term operation in PEMWE is thus highly desired, which necessitate a deep understanding of acidic OER mechanisms, unique insights of material design strategies, and reliable performance evaluation norm, especially …

The Rapid Preparation Of Efficient Mofeco-Based Bifunctional Electrocatalysts Via Joule Heating For Overall Water Splitting, Ao Zhou, Wei-Jian Guo, Yue-Qing Wang, Jin-Tao Zhang

Journal of Electrochemistry

Water electrolysis is an available way to obtain green hydrogen. The development of highly efficient electrocatalysts is a current research hotspot for water splitting, but it remains challenging. Herein, we demonstrate the synthesis of a robust bifunctional multi-metal electrocatalysts toward water splitting via the rapid Joule-heating conversion of metal precursors. The composition and morphology were well regulated via altering the ratio of metal precursors. In particular, the trimetal MoC/FeO/CoO/carbon cloth (CC) electrode revealed the outstanding bifunctional electrocatalytic performance due to the unique composition and large electrochemical active surface area. Typically, the MoC/FeO/CoO/CC catalyst needed low overpotentials of 121 and 268 …

Perovskite-Type Water Oxidation Electrocatalysts, Xiao Liang, Ke-Xin Zhang, Yu-Cheng Shen, Ke Sun, Lei Shi, Hui Chen, Ke-Yan Zheng, Xiao-Xin Zou

Journal of Electrochemistry

The development of energy conversion/storage technologies can achieve the reliable and stable renewable energy supply, and bring us a sustainable future. As the core half-reaction of many energy-related systems, water oxidation is the bottleneck due to its sluggish kinetics of the four-concerted proton-electron transfer (CPET) process. This necessitates the exploitation of low cost, highly active and stable water oxidation electrocatalysts. Perovskite-type oxides possess diverse crystal structures, flexible compositions and unique electronic properties, enabling them ideal material platform for the optimization of catalytic performance. In this review, we provide a comprehensive summary for the crystal structures, electronic structures and synthetic methods …

Self-Supporting Nife Ldhs@Co-Oh-Co3 Nanorod Array Electrode For Alkaline Anion Exchange Membrane Water Electrolyzer, Dan-Dan Guo, Hong-Mei Yu, Jun Chi, Zhi-Gang Shao

Journal of Electrochemistry

The development of efficient and durable electrodes for anion exchange membrane water electrolyzers (AEMWEs) is essential for hydrogen production. In this work, 2D NiFe layered double hydroxides (NiFe LDHs) nanosheets were grown on the 1D cobaltous carbonate hydroxide nanowires array (Co-OH-CO₃) and the unique 3D layered self-supporting nanorod array (NiFe LDHs@Co-OH-CO₃/NF) electrode was obtained. Importantly, we demonstrated an efficient and durable self-supporting NiFe LDHs@Co-OH-CO₃/NF electrode for oxygen evolution reaction (OER) and as the anode of the AEMWE. In a three-electrode system, the self-supporting NiFe LDHs@Co-OH-CO₃/NF electrode showed excellent catalytic activity for OER, …

A Co Porphyrin With Electron-Withdrawing And Hydrophilic Substituents For Improved Electrocatalytic Oxygen Reduction, Hong-Bo Guo, Ya-Ni Wang, Kai Guo, Hai-Tao Lei, Zuo-Zhong Liang, Xue-Peng Zhang, Rui Cao

Journal of Electrochemistry

Understanding factors that influence the catalyst activity for oxygen reduction reaction (ORR) is essential for the rational design of efficient ORR catalysts. Regulating catalyst electronic structure is commonly used to fine-tune electrocatalytic ORR activity. However, modifying the hydrophilicity of catalysts has been rarely reported to improve ORR, which happens at the liquid/gas/solid interface. Herein, we report on two Co porphyrins, namely, NO₂-CoP (Co complex of 5,10,15,20-tetrakis(4-nitrophenyl)porphyrin) and 5F-CoP (Co complex of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin), and their electrocatalytic ORR features. By simultaneously controlling the electronic structure and hydrophilic property of the meso-substituents, the NO₂-CoP showed higher electrocatalytic activity than …

Surface Structure Engineering Of Feni-Based Pre-Catalyst For Oxygen Evolution Reaction: A Mini Review, Jia-Xin Li, Li-Gang Feng

Journal of Electrochemistry

Nitrite, a widespread raw material, is harmful to human health for long-term consumption. At present, the detection methods of nitrite mainly include chemical analysis, fluorescence, ultraviolet spectrophotometry and chromatography. These methods have ideal sensitivity and selectivity, but also have some characteristics: cumbersome operation, expensive equipment and professional personnel. Therefore, the development of a simple and sensitive nitrite assay is of great significance. In this paper, the Au/rGO/FeOOH composite materials, which revealed good synergistic catalytic performance among the three elements in the composite, were prepared by simple hydrothermal method and reduction method for the first time with large specific surface area …

Sensitized Photooxidation Of Prenylated Compounds: Mechanisms Of Downstream Dark Effects And Phototoxicity Priming, Shakeela Jabeen

Dissertations, Theses, and Capstone Projects

This thesis consists of four chapters as detailed below.

Chapter 1 discusses a singlet oxygen priming mechanism. Airborne singlet oxygen derived from photosensitization of triplet dioxygen is shown to react with an alkene surfactant (8-methylnon-7-ene-1 sulfonate) leading to ‘ene’ hydroperoxides that in the dark inactivate planktonic E. coli. The ‘ene’ hydroperoxide photoproducts are not toxic on their own, but they become toxic after the bacteria are pretreated with singlet oxygen. The total quenching rate constant (k_T) of singlet oxygen of the alkene surfactant was measured to be 1.1 × 10⁶ M⁻¹ s^{− …}

Facile One-Step Solid-State Synthesis Of Ni-Rich Layered Oxide Cathodes For Lithium-Ion Batteries, Jing-Yue Wang, Rui Wang, Shi-Qi Wang, Li-Fan Wang, Chun Zhan

Journal of Electrochemistry

Nickel-rich layered oxide is one of the dominate cathode materials in the lithium ion batteries, due to its high specific energy density meeting the range requirement of the electric vehicles. Typically, the commercial Ni-rich layered oxides are synthesized from co-precipitated precursors, while precision control is required in the co-precipitation process to ensure the atomic level mixing of the cations such as Ni, Co and Mn, et.al. In this work, a one-step solid-state method was successfully applied to synthesize the Ni-rich layered oxide materials with ultra-high Ni content. By choosing the nickel hydroxides as the precursor with layered structure similar to …

A Novel Electrochemical Sensor Based On Au/Rgo/Feooh For One-Step Detection Of Nitrite, Da-Juan Luo, Bing-Qian Liu, Meng-Yan Qin, Rong Gao, Li-Xia Su, Yong-Huan Su

Journal of Electrochemistry

Nitrite, a widespread raw material, is harmful to human health for long-term consumption. At present, the detection methods of nitrite mainly include chemical analysis, fluorescence, ultraviolet spectrophotometry and chromatography. These methods have ideal sensitivity and selectivity, but also have some characteristics: cumbersome operation, expensive equipment and professional personnel. Therefore, the development of a simple and sensitive nitrite assay is of great significance. In this paper, the Au/rGO/FeOOH composite materials, which revealed good synergistic catalytic performance among the three elements in the composite, were prepared by simple hydrothermal method and reduction method for the first time with large specific surface area …

Quantitative Lithium Composite As 3d Lithium Foam Anode For Lithium Metal Battery, Hu-Dong Li, Wei-Shang Jia, Xin-Xiu Yan, Yao-Yue Yang

Journal of Electrochemistry

Lithium (Li) metal as an anode material for batteries has extremely high specific capacity and extremely low redox potential, which can significantly improve the energy density of the battery. However, the main problems faced by the use of Li metal anodes are Li dendrite growth, interfacial side reaction and volumetric change of electrode. Herein, a strategy to prepare the three-dimensional (3D) Li foam by combining 3D scaffold with quantitative Li was proposed to suppress Li dendrites growth and alleviate electrode volumetric change. The 3D Li foam facilitated the efficient utilization of Li metal by suppressing the Li dendrite growth, mitigating …

Low-Crystallinity And Heterostructured Aupt-Ru@Cnts As Highly Efficient Multifunctional Electrocatalyst, Tuan-Jie Gan, Jian-Ping Wu, Shi Liu, Wen-Jun Ou, Ling Bin, Xiong-Wu Kang

Journal of Electrochemistry

The catalytic activity of the catalysts is strongly dependent on the structure of the catalysts, and the exploration of their correlation and structure-controlled synthesis of the high-performance catalysts are always at the central. Currently, platinum (Pt) is the optimum catalyst for hydrogen evolution reaction (HER), oxygen reduction reaction (ORR) and alcohol oxidation reaction, while ruthenium (Ru) behaves as the champion catalyst for oxygen evolution reaction (OER) during water splitting. Preparing alloy catalysts with these precious metals can modulate the catalytic activity of these catalysts from the perspective of strain effect, ensemble effect and ligand effect. Here, we developed a strategy …

Optimized Electrochemical Performance Of Si@C Prepared By Hydrothermal Reaction And Glucose Carbon Source, Si Chen, Song-Sheng Zheng, Lei-Ming Zheng, Ye-Han Zhang, Zhao-Lin Wang

Journal of Electrochemistry

Silicon (Si) has been considered as the potential material for the next-generation lithium-ion batteries (LIBs) for its high capacity (4200 mAh·g^-1, Li₂₂Si₅) and suitable working voltage (about 0.25 V vs. Li/Li⁺). However, the cycling stability and electrochemical performance of Si anode become significant challenges because of low intrinsic conductivity and huge volume variation (about 400%) during cycling processes. In addition, the repeated formation and destruction of surface solid electrolyte interphase (SEI) film will continuously consume the electrolyte and cause damage to LIBs. Carbon (C) materials, such as graphite, carbon spheres and tubes, …

Adsorption Of Helium And Hydrogen On Triphenylene And 1,3,5-Triphenylbenzene, Bergmeister Bergmeister, Kollotzek Kollotzek, Florent Calvo, Elisabeth Gruber, Fabio Zappa, Paul Scheier, Olof E. Echt

Faculty Publications

The adsorption of helium or hydrogen on cationic triphenylene (TPL, C₁₈H₁₂), a planar polycyclic aromatic hydrocarbon (PAH) molecule, and of helium on cationic 1,3,5-triphenylbenzene (TPB, C₂₄H₁₈), a propeller-shaped PAH, is studied by a combination of high-resolution mass spectrometry and classical and quantum computational methods. Mass spectra indicate that He_nTPL⁺ complexes are particularly stable if n = 2 or 6, in good agreement with the quantum calculations which show that for these sizes the helium atoms are strongly localized on either side of the central carbon ring for n = …

Kinetics, Products, And Brown Carbon Formation By Aqueous-Phase Reactions Of Glycolaldehyde With Atmospheric Amines And Ammonium Sulfate, David O. De Haan, Alyssa A. Rodriguez, Michael A. Rafla, Hannah G. Welsh, Elyse A. Pennington, Jason R. Casar, Lelia N. Hawkins, Natalie G. Jimenez, Alexia De Loera, Devoun R. Stewart, Antonio Rojas, Matthew-Khoa Tran, Peng Lin, Alexander Laskin, Paola Formenti, Mathieu Cazaunau, Edouard Pangui, Jean-François Doussin

Chemistry and Biochemistry: Faculty Scholarship

Glycolaldehyde (GAld) is a C₂ water-soluble aldehyde produced during the atmospheric oxidation of isoprene and many other species and is commonly found in cloudwater. Previous work has established that glycolaldehyde evaporates more readily from drying aerosol droplets containing ammonium sulfate (AS) than does glyoxal, methylglyoxal, or hydroxyacetone, which implies that it does not oligomerize as quickly as these other species. Here, we report NMR measurements of glycolaldehyde’s aqueous-phase reactions with AS, methylamine, and glycine. Reaction rate constants are smaller than those of respective glyoxal and methylglyoxal reactions in the pH range of 3–6. In follow-up cloud chamber experiments, deliquesced …

Understanding Dynamics Of Polymers Under Confinement: A Molecular Dynamics And Neutron Scattering Study, Supun Samindra Kamkanam Mohottalalage

All Dissertations

The current study probes the structure, dynamics, and rheological behavior of associating polymers including ionomers in melts and solutions as well as conjugated polymers confined into nanoparticles, using molecular dynamics (MD) simulations and neutron scattering techniques. The study focuses on two families of associative polymers, ion containing macromolecules and conjugated polymers.

Polymers that consist of ionizable groups along their backbone found uses in a broad range of applications. Examples include light weight energy storage and generation systems, and biomedical applications, where the polymers act as ion exchange membranes, and actuators. The ionic groups tend to form clusters that are in …

Electrochemical Deposition Of Copper Pillar Bumps With High Uniformity, Bai-Zhao Tan, Jian-Lun Liang, Zi-Liang Lai, Ji-Ye Luo

Journal of Electrochemistry

Electrochemical deposition of copper pillar bumps (CPBs) is one of the key technologies for the advanced packaging. In this study, the effects of the additive concentration, the electrolyte convection, the current density, and the electroplating system on the uniformity of the CPBs have been systematically investigated. The results showed that the profiles of the CPBs were mainly determined by the additive concentration, the bath convection and the current density, while the heights of the CPBs were mainly affected by the electroplating system. For the CPBs profiles, it was found that the low leveler concentration and high current density would generally …

Research Progress In Electroless Cobalt Plating And The Bottom-Up Filling Of Electroless Plating, Yu Shen, Bing-Bing Li, Yi Ma, Zeng-Lin Wang

Journal of Electrochemistry

With the continuous improvement of semiconductor integration, the resistivity of copper interconnect lines increases rapidly. When the width of the interconnect line is close to 7 nm, the resistivity of copper becomes the same as that of cobalt. International Business Machines Corporation (IBM) and Advanced Semiconductor Incorporation (ASI) have used cobalt to replace copper as a next-generation interconnect material. However, the fabrication of the cobalt seed layer and the super filling of electroplating cobalt for the 7 nm via-holes have been still the large challenge. Electroless plating is a very simple method to form a seed layer on the surface …

Research Progress Of Copper Electrodeposition Filling Mechanism In Silicon Vias, Yun-Na Sun, Yong-Jin Wu, Dong-Dong Xie, Han Cai, Yan Wang, Gui-Fu Ding

Journal of Electrochemistry

Aiming at the electroplating filling problem of deep via TSV (through silicon via) interconnection, the multi-compatible integrated manufacturing technology team at the Shanghai Jiao Tong University has completed the numerical solution of the equations and realized the numerical simulation of TSV filling mode by applying the finite element method with arbitrary Lagrange Euler algorithm. The filling mechanisms of blind vias, the butterfly filling form for the through vias and the simultaneous filling mode of vias with different aspect ratios are analyzed by simulation, contributing to the parameter optimization and sample manufacturing. The effects of electroplating current density and heat treatment …

Effect Of Corrosion Inhibitors On Copper Etching To Form Thick Copper Line Of Pcb In Acidic Etching Solution, Xiao-Li Wang, Wei He, Xian-Ming Chen, Hong Zeng, Yuan-Zhang Su, Chong Wang, Gao-Sheng Li, Ben-Xia Huang, Lei Feng, Gao Huang, Yuan-Ming Chen

Journal of Electrochemistry

The chemical compounds of 2-mercaptobenzothiazole (2-MBT), benzotriazole (BTA) and phenoxyethanol (MSDS) as corrosion inhibitors were used to inhibit the copper etching to form the thick copper line of PCB in the acidic etching solution. The inhibition status was characterized with contact angle measurement, electrochemical test and etch factor calculation, while the corrosion morphology of copper surface was studied by scanning electron microscope. The adsorption mechanism of corrosion inhibitors on copper surface is analyzed by molecular dynamics and quantum chemistry calculations. The results indicated that the synergistic function of the two inhibitors could effectively promote their adsorption on the copper surface …

Mechanism And Application Of Nickel Nano-Cone By Electrodeposition On A Flexible Substrate, Xiu-Ren Ni, Ya-Ting Zhang, Chong Wang, Yan Hong, Yuan-Ming Chen, Yuan-Zhang Su, Wei He, Xian-Ming Chen, Ben-Xia Huang, Zhen-Lin Xu, Yi-Feng Li, Neng-Bin Li, Yong-Jie Du

Journal of Electrochemistry

Nano-array structure possesses promising prospect in power supply, optical device and electronic manufacturing. In this paper, a black nickel nano-cone array was prepared on a flexible substrate by galvanostatic deposition and the corresponding factors involved in the fabrication of nickel nano-cone array was explored. Experimental results showed that a large current density and low main salt concentration were not favored to the formation of cone nickel structure. It was also found that ammonium chloride, as the crystal modifier, was crucial to deposit the uniform nano-cone array. In addition, the growth mechanism of nickel nano-cone was further studied by molecular dynamics …

Preface To Special Issue On Electronic Electroplating, Zhi-Dong Chen, Chong Wang, Wei He, Ming Li

Journal of Electrochemistry

No abstract provided.

Electrodeposition Of Functional Epitaxial Films For Electronics, Kui Huang, Rong-Jiao Huang, Su-Qin Liu, Zhen He

Journal of Electrochemistry

Electrodeposition is a solution-based synthesis technique that can be used to fabricate various functional materials on conductive or semiconductive substrates under ambient conditions. Electrodeposition is usually triggered by an artificial electric stimulation (i.e., applied potential/current) to the substrate to oxidize or reduce ions, molecules, or complexes in the deposition solution layer near the substrate surface, which drives this solution layer to depart from its thermodynamic equilibrium and consequently causes the assembly of targeted deposits on the substrate. During electrodeposition, many experimental parameters could affect the properties of the deposits in different ways. To date, many elements (both metals and nonmetals), …

Electrodeposition Mechanism And Process Of A Novel Cyanide-Free Gold Sulfite Bath, Jia-Qiang Yang, Lei Jin, Wei-Qing Li, Zhao-Yun Wang, Fang-Zu Yang, Dong-Ping Zhan, Zhong-Qun Tian

Journal of Electrochemistry

A novel cyanide-free gold sulfite process is introduced in this paper. In the bath, chloauric acid was directly employed as the main salt, and hydroxyethylidene diphosphonic acid (HEDP) was used as the stabilizer and coating grain refiner. The bath stability, the gold coating morphology and the mechanism of gold electrodeposition were studied in detail. The results showed that HEDP could significantly improve the bath stability. Moreover, the grains of the gold coating obtained from the gold sulfite bath without HEDP was rod-like, which grew gradually with the increasing of the deposition time, resulting in that the appearance of the coating …