Physical Chemistry Commons^™

Laser Ablation In Liquid For The Controlled Production Of Photoluminescent Graphene Quantum Dots And Upconverting Nanoparticles, Rosemary Lynn Calabro

Theses and Dissertations--Chemistry

Photoluminescent­ (PL) nanomaterials play an important role in areas including displays, sensing, solar, photocatalysis, and bio applications. Traditional methods to prepare PL materials suffer many drawbacks such as harsh chemical precursors, complicated synthetic steps, and production of many byproducts. Laser ablation in liquid (LAL) has emerged as a promising alternative to prepare materials that is single-step, fast, uses fewer precursors, produces fewer side products, and has simple purification steps. During LAL, a solid target is irradiated with a pulsed laser source. The laser pulses cause plasma plumes of the target material to form which are cooled, condensed, and can react …

Structure, Surface, And Interfacial Modifications Of Carbon And Supported-Metal Electrodes For Electrochemical Carbon Dioxide Conversion, Namal Wanninayake

Theses and Dissertations--Chemistry

Currently, the global emission of greenhouse CO₂ is over 36 billion tons per year. Consequently, the atmosphere's CO₂ concentrations have exceeded 400 ppm, which is the highest reported in the last three million years. The accumulation of CO₂ is the most critical origin for today's climate change; thus, closing the carbon cycle is vital to reverse the detrimental impacts of climate change. Under this goal, the electrochemical reduction of CO₂ into commodity fuels and chemicals via renewable energy is one of the most promising strategies to recycle CO₂. Despite significant progress made in electrocatalysis, …

Multi-Component Material For Solar Energy Conversion And Fundamentals Of Lead Acid Batteries, Crystal Ferels

Graduate Research Theses & Dissertations

Synthesis of complex inorganic materials is desirable because their complex composition allows more degrees of freedom and tunability, whose properties differ from their parent components. As an expansion on this concept, we synthesized a quinary compound Ce3FeWS3O6, using a molten flux method and a solvothermal method. The compound crystallizes into a hexagonal crystal system with space group P63/m. Its electric partition shows an anion with the form [(Ce3+)3W6+(S2-)3(O2-)6]3- forcing the transition metal Fe3+ state and leaving no conduction electrons, making the material a semiconductor. This compound is the right candidate as photoelectric material capable of absorbing photons from the solar …

Effects Of Hole Transporting Layers And Surface Ligands On Interface Energetics And Photovoltaic Performance Of Methylammonium Lead Iodide Perovskites, So Min Park

Theses and Dissertations--Chemical and Materials Engineering

Organic metal halide perovskites are promising materials for various optoelectronic device applications such as light emitting diodes (LED) and photovoltaic (PV) cells. Perovskite solar cells (PSCs) have shown dramatic increases in power conversion efficiency over the previous ten years, far exceeding the rate of improvement of all other PV technologies. PSCs have attracted significant attention due to their strong absorbance throughout the visible region, high charge carrier mobilities, color tunability, and ability to make ultralight weight devices. However, organic metal halide perovskites still face several challenges. For example, their environmental stability issue must be overcome to enable widespread commercialization. Meeting …

Multiscale Modeling Of Structure-Function Relationships Of Organic Semiconductors, Shi Li

Theses and Dissertations--Chemistry

While optoelectronic devices built from organic semiconductors (OSC) continue to find their way into the commercial landscape, there remain numerous challenges to overcome to supplant traditional semiconductors in many technologies. Chief among these are low performance metrics relative to devices with conventional semiconductors and device stability. In order to overcome these challenges, a wide range of new OSC and processing technologies have been developed. However, there remains limited fundamental understanding of the relationship between molecular structure, packing in the solid state, and the resulting materials properties. Here, we make use of multiscale molecular models and utilize classical all-atom molecular dynamic …

Threshold Ionization Spectroscopy And Spin-Orbit Coupling Of Lanthanide Complexes, Yuchen Zhang

Theses and Dissertations--Chemistry

The C-C and C-H bonds have high bond strength and low polarization, which make many small hydrocarbons too inert to react with other molecules under ambient pressure and temperature conditions. Therefore, activation of these bonds is required to convert such small molecules into other value-added chemicals. Among various bond activation methods, metal activation is widely used and reported in the literature, because of its relatively mild reaction conditions and high selectivity.

In this work, Ce atom reactions with several small hydrocarbons are carried out in a pulsed laser vaporization supersonic molecular beam source, and Ce -hydrocarbon species are observed with …

Towards The Rational Design Of Organic Semiconductors Through Computational Approaches, Qianxiang Ai

Theses and Dissertations--Chemistry

Though organic semiconductors have illustrated potential as industry-relevant materials for electronics applications, there are few guidelines that can take one from molecular design to functional materials. This limitation is, in part, due to incomplete understanding as to how the atomic-scale construction of the π-conjugated molecules that comprise the organic semiconductors determines the nature and strength of both the noncovalent intramolecular interactions that govern molecular conformation and noncovalent intermolecular interactions that regulate the energetic preference for solid-state packing. Hence, there remain several fundamental questions that need to be resolved in order to design organic semiconductors from a priori knowledge, including: What …

Designing Metal-Halide Perovskites With Enhanced Optical Properties And Stability Using Surface Ligands, Md Aslam Uddin

Theses and Dissertations--Chemistry

Metal-halide perovskites (MHPs), with formula ABX₃ (A = methylammonium, formamidinium, or Cs⁺; B = Sn²⁺ or Pb²⁺; and X = Cl^-, Br^-, or I^-) are versatile and attractive materials because of their tunable optical and electronic properties. These optical and electronic properties include tunable direct band gaps, high absorption coefficients, low exciton binding energies, relatively high electron and hole mobilities, narrow emission line-widths, and high photoluminescence (PL) quantum yields (Φ_PL). Much of the initial excitement around organic metal-halide perovskites focused on their application in photovoltaics (PVs) …

A Theoretical And Experimental Study Of Charge Transport In Organic Thermoelectric Materials And Charge Transfer States In Organic Photovoltaics, Ashkan Abtahi

Theses and Dissertations--Physics and Astronomy

Applications of organic electronics have increased significantly over the past two decades. Organic semiconductors (OSC) can be used in mechanically flexible devices with potentially lower cost of fabrication than their inorganic counterparts, yet in many cases organic semiconductor-based devices suffer from lower performance and stability. Investigating the doping mechanism, charge transport, and charge transfer in such materials will allow us to address the parameters that limit performance and potentially resolve them. In this dissertation, organic materials are used in three different device structures to investigate charge transport and charge transfer. Chemically doped π-conjugated polymers are promising materials to be used …

Three Studies Of Research-Based Pedagogy In Physical Chemistry: Development Of A Zno Thin Film Experiment, Analysis Of Student Discourse By Graph Theory And Cognitive Engagement, Building A Physical Chemistry Faculty Network., Dilhara Liyanage

Theses and Dissertations

Three research projects, each focusing on a different aspect, development of a ZnO thin film experiment, student’s cognitive engagement behavior, and building of a faculty network, are presented in this dissertation.

In the first project, a physical chemistry laboratory experiment was developed to answer the question, “How do electrons move in a solid?”. The experiment structure follows the POGIL-PCL (Process Oriented Guided Inquiry Learning - Physical Chemistry Laboratory) model. Students begin by using the PhET “Quantum Bound States” animation to compare energy levels for single atoms to energy levels of a lattice containing many potential wells, and they incorporate that …

Structure, Morphology And Composition-Property Elucidation Of Ni–Mo And Ni−Mo−P Nanocrystals For Water Splitting Reactions And Group Iv Alloy And Silicate Nanocrystals For Visible To Near Ir Optoelectronics, Ebtesam Hassan Abuelenein Eladgham

Theses and Dissertations

Abstract

Structure, Morphology and Composition-Property Elucidation of Ni–Mo and Ni−Mo−P Nanocrystals for Water Splitting Reactions and Group IV Alloy and Silicate Nanocrystals for Visible to Near IR Optoelectronics

by

Ebtesam Hassan Abuelenein Eladgham

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Advisor: Indika U Arachchige

Associate Professor, Department of Chemistry

Nanomaterials have gained a great attention because of their unique physical properties with size intermediate between molecular materials and extended solids. They have a large surface to volume ratio and display size tunable physical properties that was not …

Metal-Oxide Nanostructures Fabricated From Reactive Laser Ablation In Liquid, Mallory G. John

Theses and Dissertations

The development of metal-oxide nanostructures is a growing area due to their applications in diverse fields spanning energy conversion and storage, chemical manufacturing, and en- vironmental technology. This interest in catalytically active nanomaterials has prompted the synthesis and investigation of highly functionalized nanoparticles (NPs), including core- shell, silicate-stabilized, and bi- and multi-metallic nanocomposites. While wet-chemical synthesis methods of metal-oxide nanostructures have led to several morphologies, compositions, and shapes, these syntheses often require high temperatures, toxic solvents or reducing agents, and long reaction times.

Laser synthesis and processing of colloids (LSPC) encompasses both ‘top down’ and ‘bottom up’ approaches to synthesize …

Probing Vibrational Wave Packets In Organophoshorous Molecules Using Femtosecond Time-Resolved Mass Spectrometry (Ftrms), Derrick Ampadu Boateng

Theses and Dissertations

The study of organophosphorus and nitroaromatic compounds is essential due to their suitability as models for understanding the dynamics of radiation induce damage to DNA sugar-phosphate backbone, and the detection of chemical warfare agents as well as nitroaromatic explosives (such as TNT). The ultrafast dynamics of these polyatomic radicals were studied using femtosecond time-resolved mass spectrometry (FTRMS), a versatile method that is capable of monitoring the ultrafast dynamics of rapid dissociation in the gas phase after the removal of an electron. The method uses a technique called pump-probe, which makes use of two time-delayed laser pulses. In this work, the …

Investigations Of Graphene-Supported Single-Atom Catalyst Model Ions In The Gas Phase, Michael Borrome

Theses and Dissertations

Recent developments in heterogeneous catalysis has led to the conception of single-atom catalysts (SACs), a class of catalysts based on isolated metal atoms anchored to a support scaffold. SACs are often much more reactive and can offer better selectivity when compared to nano-scale catalysts. In order to realize the full potential of SACs, a sound understanding of the underlying catalytic mechanisms is required. However, surface analysis tools can become less effective in studying catalytic mechanisms at the atomic scale. Mass spectrometry has proven to be a robust technique for studying organometallic catalytic mechanisms at the single-molecule level. Using mass spectrometry, …