Physical Chemistry Commons^™

Spectroscopic And Computational Studies Of Molybdenum Enzymes And Models, Chao Dong

Chemistry and Chemical Biology ETDs

In this dissertation spectroscopic methods such as electronic absorption (EAS), resonance Raman (rRaman), electron paramagnetic resonance (EPR), and MCD spectroscopies have been used in combination with DFT calculations for the interpretation of experimental results. These methods have been used to investigate the molybdenum coordination environment in enzymes and model complexes. Xanthine oxidase (XO), one of the canonical molybdenum enzyme families, hydroxylizes heterocyclic substrates by inserting an oxygen atom from molybdenum-activated water into a substrate C-H bond. This generates reducing equivalents that pass through two iron sulfur clusters and then to FAD, where oxidation of the FAD takes place. In this …

Study Of Novel Synthetic Methodologies For Indolyl Derivatives And Beta-Fluoroenals, Xiaobei Chen

Chemistry and Chemical Biology ETDs

One of the central goals in modern organic synthesis is to develop efficient synthetic strategies for the preparation and study of complex molecules possessing interesting structural, biological, and physical properties. Toward this end, my Ph. D. work focuses on the development of novel synthetic methodologies for the facile construction of synthetically and biologically significant molecular architectures. The tert-prenylated indoles and indolines are widely present in a large collection of natural products and biologically active compounds. Although significant efforts have been made on the development of efficient methods to prepare these intriguing molecular architectures, few methods have been explored to introduce …

Corrosion Protection Of 304 Stainless Steel With Melting Gels Coatings, Mario Aparicio, Andrei Jitianu, Gabriela Rodriguez, Ahmad Dengah, Kutaiba Marzoki, Jadra Mosa, Lisa C. Klein

Publications and Research

Methyl-substituted melting gels were used to coat AISI 304 stainless steel substrates. Crack-free coatings up to 1 mm in thickness were obtained. SEM micrographs of cross-sections con fi rm good adhesion to the surface. Samples were subjected to structural characterization using FT-IR, and Raman spectroscopy. Mechanical properties were investigated by micro-scratch tests. Electrochemical analyses (anodic polarization and electrochemical impedance spectroscopy) were performed in 3.5% NaCl solutions. Electrochemical tests show excellent performance of the coatings against corrosion with no sign of degradation after several months of immersion.

Simulation Of Energetic Particle Precipitation Effects During The 2003-2004 Arctic Winter, C. E. Randall, V. L. Harvey, L. A. Holt, D. R. Marsh, D. Kinnison, B. Funke, P. F. Bernath

Chemistry & Biochemistry Faculty Publications

Energetic particle precipitation (EPP) during the 2003-2004 Arctic winter led to the production and subsequent transport of reactive odd nitrogen (NO_x=NO+NO₂) from the mesosphere and lower thermosphere (MLT) into the stratosphere. This caused NO_x enhancements in the polar upper stratosphere in April 2004 that were unprecedented in the satellite record. Simulations of the 2003-2004 Arctic winter with the Whole Atmosphere Community Climate Model using Specified Dynamics (SD-WACCM) are compared to satellite measurements to assess our understanding of the observed NO_x enhancements. The comparisons show that SD-WACCM clearly displays the descent of NO_x produced …

Growth In Stratospheric Chlorine From Short-Lived Chemicals Not Controlled By The Montreal Protocol, R. Hossaoni, M. P. Chipperfield, A. Saiz-Lopez, J. J. Harrison, R. Von Glasow, R. Sommariva, E. Atlas, M. Navarro, S. A. Montzka, W. Feng, P. F. Bernath

Chemistry & Biochemistry Faculty Publications

We have developed a chemical mechanism describing the tropospheric degradation of chlorine containing very short-lived substances (VSLS). The scheme was included in a global atmospheric model and used to quantify the stratospheric injection of chlorine from anthropogenic VSLS (Cl_y^VSLS) between 2005 and 2013. By constraining the model with surface measurements of chloroform (CHCl₃), dichloromethane (CH₂Cl₂), tetrachloroethene (C₂Cl₄), trichloroethene (C₂HCl₃), and 1,2-dichloroethane (CH₂ClCH₂Cl), we infer a 2013 Cl_y^VSLS mixing ratio of 123 parts per trillion (ppt). Stratospheric injection …

Titanium Trisulfide Monolayer: Theoretical Prediction Of A New Direct-Gap Semiconductor With High And Anisotropic Carrier Mobility, Jun Dai, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

A new two-dimensional (2D) layered material, namely, titanium trisulfide (TiS₃) monolayer, is predicted to possess novel electronic properties. Ab initio calculations show that the perfect TiS₃ monolayer is a direct-gap semiconductor with a bandgap of 1.02 eV, close to that of bulk silicon, and with high carrier mobility. More remarkably, the in-plane electron mobility of the 2D TiS₃ is highly anisotropic, amounting to about 10,000 cm² V⁻¹ s⁻¹ in the b direction, which is higher than that of the MoS₂ monolayer, whereas the hole mobility is about two orders of magnitude lower. …

The Investigation Of The Low Temperature Combustion Of Mesitylene And Tert-Amyl Methyl Ether By Synchrotron Photoionization Mass Spectrometry, Martin Yu-Hin Ng

Master's Theses

This thesis describes the combustion experiments performed at the Chemical Dynamics Beamline of the Advanced Light Source (ALS) located at the Lawrence Berkeley National Laboratories (LBNL). The need for renewable fuel sources, the need for the study of their combustion in the contexts of homogenous charge combustion ignition (HCCI) engines can be found in Chapter 1. The components of the experimental set-up used throughout this thesis—time-of-flight mass spectrometer, Excimer laser, vacuum pumps and other components—and the components of ALS responsible in synchrotron radiation generation and processing—the linear accelerator, the booster ring, insertion devices, gas filters and monochromator are explained in …

Diol-Mediated Versus Water-Mediated Proton Transfer Reactions, Angela Moses

DePaul Discoveries

The triple-proton-transfer reactions of 8H-1,8-naphthyridin-2-one (8H-naph) have been investigated by employing different ab initio quantum mechanical methods. The proton transfer reactions studied were facilitated through an adjacent 1,3-propanediol molecule or two adjacent water molecules. Identical proton transfer reactions were studied using a model system of 8H-naph to investigate the validity of computational approaches that use model systems to study more complex systems. The solvent effects on the structures were investigated for comparison to the initial gas phase calculations. The potential energy, reaction force, and work profiles were studied along the intrinsic reaction coordinate to monitor the developing proton transfer reactions.

Furanic Molecules: Multiplexed Synchrotron Photoionization Investigations And Aerosol Studies, Audrey R. Smith

Master's Theses

The oxidation reactions of 2-methylfuran (2MF) and 2-ethylfuran (2EF) initiated by Cl radicals is studied at the low temperatures, in addition to the determination of the absolute photoionization cross-sections of 2EF, 2-acetylfuran, and furfural. These experiments are carried out using synchrotron photoionization mass spectrometry (SPIMS) with an orthogonal time-of-flight spectrometer used for mass analysis at the Advanced Light Source of Lawrence Berkeley National Laboratory. CBS-QB3 calculated adiabatic ionization energies (AIE) agree well with the experimental results and published literature values. Furfural is found to be the dominant product of 2MF oxidation, with 2-acetylfuran and 2-vinylfuran being the dominant products of …

Effects Of Anions And Amino Acids On Surface Tension Of Water, Diana Al Husseini

Senior Honors Projects, 2010-2019

Hofmeister series is a set of ions in order of their abilities to affect physical properties in aqueous solutions. Franz Hofmeister was the first to discover the specific ion effects on protein solubility in aqueous solutions. Although the Hofmeister phenomena are general, their mechanisms are still not fully understood. Herein, we use optical tensiometry by a pendant drop method to study the Hofmeister anion effects on the surface tension of water. It has been observed that the surface tension of water increases linearly as the salt concentrations increase. The effects of salts follow a specific trend with respect to the …

Corrosion Behaviors Of Coated Aluminum Alloys In Simulated Corrosive Environment, Jingyi Yue

Masters Theses & Specialist Projects

This study investigated the corrosion of an aluminum alloy with and without coatings under simulated corrosive environments. Coatings were selected and applied from commercial materials and techniques, consisting of microceramic, epoxy primer, and topcoat. The experiments for coated specimens were carried out under various corrosive conditions, specifically, hydrodynamic flow, immersion in salt water and DI water, varying temperatures, and simulated sun light. The hydrodynamic conditions were simulated using a rotating cylinder electrode (RCE) with rotational speeds of 200, 400, 600, 800, and 1000 rpm. The immersion in saltwater and sunlight illumination tests were applied for 8 hours, and the simulated …

Chemically Accurate Calculations Of Rate Constants Of Spin Trap-Hydroxyl Radical Addition Reactions, Hayden B. Short

Undergraduate Honors Theses

The DMPO type spin trap 5,5-Dimethyl-1-pyrroline N-oxide (DMPO) and the exceptionally similar spin trap 2-ethoxycarbonyl-2-methyl-3,4-dihydro-2H-pyrrole-l-oxide (EMPO) are widely studied in computational and theoretical works. This particular study examines the addition reactions that both these molecules undergo with the carcinogenic hydroxyl radical. This work used a relatively new approximation method, called the correlation consistent composite approach or ccCA, for carrying out quantum mechanical calculations to give the free energies of the products and reactants of the reactions. The free energies are to be used to extrapolate the rate constants of the reactions from the Arrhenius equation. Though both the spin traps …

Syntheses, Structures And Properties Of Metal-Organic Frameworks, Xin Liu

Masters Theses & Specialist Projects

Mercury is one of the most serious heavy metal pollution sources that threaten people’s health. For decades, people have developed many technologies and materials to capture mercury from flue gas of coal-fired plant. Currently, the most effective material for mercury absorption is powdered activated carbon, which shows increased efficiency when modified with halogen functional groups such as bromine. Metal-organic frameworks (MOFs) have potential applications in mercury capture due to their fantastic properties such as high porosity and high thermal stability. More important, their pore sizes and topology structures can be controlled through choosing different organic ligands in the syntheses. However, …

Green Chemistry As A Tool For Understanding The Toxic Substances Control Act: A Lecture Module For Undergraduate Students, Molly R. Blessing

Honors Scholar Theses

The Toxic Substances Control Act (TSCA) is the central form of chemical regulation existent in the United States today, yet scientists are often unaware or uncertain of its provisions. Violations of TSCA by unknowing chemists set industry and government unnecessarily at odds. A lecture on TSCA was developed for undergraduate students that uses the concept of green chemistry to promote interest and incentivize learning. Green chemistry methods are cleaner and less wasteful than traditional chemical ones, and many companies using them are at the forefront of technological innovation. The lecture explains both green chemistry and TSCA, includes company case studies, …

Inertial Force-Driven Synthesis Of Near-Infrared Plasmonic Nanosphere Composites: Physicochemical Characterizations, Joseph Noel Batta-Mpouma

Graduate Theses and Dissertations

Near-infrared (NIR) responsive nanoparticles (NPs) like gold nanorods (GNRs) are important in biomedical fields because of their transparency for biological tissues. Although GNRs are sought after as contrast agents for theranostics in cancer studies, capping ligands like cetyltrimethylammonium bromide (CTAB) for the GNR synthesis are toxic for biological tissues. The need for an alternative to toxic GNRs is of interest to alleviate the problem.

This work aimed to optimize the synthesis of NIR responsive nanosphere composites (NSCs) by inertial force (g-force) using colloidal gold NPs as model, elucidate the mechanism for the NSC formation, and study their detailed physicochemical characteristics. …

Analysis And Comparison Of The Photodecomposition Reaction Of Methanol On Ceo2 Impregnated Tio2 Surfaces Versus Bare Tio2 Surfaces, Christopher A. Estes

Master of Science in Chemical Sciences Theses

Titanium dioxide (TiO₂) has been well-studied primarily due to its unique photocatalytic activity. Different preparation techniques have been developed to increase its photocatalytic activity by various means, including simply increasing the surface area, changing the makeup of the framework, and modifying the surface with a dopant. This study focuses on the effect cerium oxide (CeO₂) has on the photocatalytic activity of TiO₂ by depositing CeO₂ on the TiO₂ surface. Methanol is used as a probe reactant for these experiments due to its wide use in heterogeneous catalysis research and the limited products that …

Investigations Of The Photocatalytic Activity And Self-Cleaning Properties Of Polyhedral Oligomeric Silsesquioxane (Poss) Containing Titania Thiol-Ene Films, Lacrissia Unsonta Jefferson

Dissertations

In this document the film composition, self-cleaning aspect, photocatalytic efficiency, and methods employed to analyze a novel photocatalytic titania-containing thin film was evaluated. A primary objective of this research project was to assess the conditions required to achieve a stable titania dispersion for the photocatalytic coating and to determine the extent to which the presence of additives contributes to this process. Modified titania dispersions were prepared and characterized via dynamic light scattering (DLS), transmission electron microscopy (TEM), fourier transmission infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Characterization details of the previous focus on the influence of polyhedral oligomeric silsesquioxane (POSS) …

The Requisite Electronic Structure Theory To Describe Photoexcited Nonadiabatic Dynamics: Nonadiabatic Derivative Couplings And Diabatic Electronic Couplings, Joseph E. Subotnik, Ethan Alguire, Qi Ou, Brian R. Landry, Shervin Fatehi

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

Conspectus

Electronically photoexcited dynamics are complicated because there are so many different relaxation pathways: fluorescence, phosphorescence, radiationless decay, electon transfer, etc. In practice, to model photoexcited systems is a very difficult enterprise, requiring accurate and very efficient tools in both electronic structure theory and nonadiabatic chemical dynamics. Moreover, these theoretical tools are not traditional tools. On the one hand, the electronic structure tools involve couplings between electonic states (rather than typical single state energies and gradients). On the other hand, the dynamics tools involve propagating nuclei on multiple potential energy surfaces (rather than the usual ground state dynamics).

In this …

Researches On In-Situ And Ex-Situ Characterization Techniques In Lithium Batteries, Wen-Jun Li, Jie-Yun Zheng, Lin Gu, Hong Li

Journal of Electrochemistry

Electrochemical performance of Lithium batteries is directly linked to interfacial transports, reactions and storing behaviors of electrons and ions at bulk-surface interfaces. It is extremely important to conduct evolution studies from atomic level to macro level in electron structures, crystal structures, microstructures and morphologies, chemical compositions and physical properties of battery materials at equilibrium and nonequilibrium in order to understand various structure-performance relations in lithium ion batteries. Advanced in-situ and ex-situ characterization techniques have been used widely to clarify scientific and technological problems in lithium batteries. This paper summarizes our efforts on battery researches using various experimental techniques, including in …

Recent Research Progress For Non-Pt-Based Oxygen Reduction Reaction Electrocatalysts In Fuel Cell, Ping Song, Ming-Bo Ruan, Jing Liu, Guang-Jun Ran, Wei-Lin Xu

Journal of Electrochemistry

The expensive Pt-based catalyst suffers from its susceptibility to time-dependent drift, methanol crossover, and carbon monoxide (CO) deactivation, which will block the large-scale commercial application of fuel cells. It is, therefore, necessary to develop efficient, low-cost, highly stable non-precious metal oxygen reduction reaction (ORR) catalysts with high catalytic performance. Here, we will pay attention to the research progress of non-precious metal and heteroatom-doped (N, B, P, S, F) metal-free ORR catalysts. Importantly, we mainly focus on the work developed by Xu’s group with the Fe-based non-precious metal and F/NF-doped metal-free ORR catalysts. The purpose of these works is to improve …

Research Progress Of Mn-Based Lithium-Rich Cathode Materials For Li-Ion Batteries, Luo-Zeng Zhou, Qun-Jie Xu, Wei-Ping Tang, Xue Jin, Xiao-Lei Yuan

Journal of Electrochemistry

With rapid development of new energy industry like electric vehicles and energy storage station, these fields highly demand the next generation of high performance Li-ion battery systems with stronger energy density, higher power density, and longer cycling life. Lithium-rich Mn-based cathode materials, xLi₂MnO₃·(1-x)LiMO₂(M=Mn, Co, Ni...), have become the hot topic and drawn attentions of scholars worldwide because of their high reversible capacity exceeding 240 mAh·g^-1, excellent electrochemical properties, and low cost, which makes them most promising cathode material candidates for next Li-ion battery system. The cathode material Li[Li_0.2Mn_0.54Ni …

Preparation And Properties Of Binary Oxides CoXCr1-XO3/2 Electrocatalysts For Oxygen Evolution Reaction, Tai-Lai Yang, Wen-Yan Dong, Hui-Min Yang, Li Zhang, Zhen-Hai Liang

Journal of Electrochemistry

Binary metal mixed oxides of Co and Cr with nominal compositional formulas, Co_xCr_1-xO_3/2 (x=0, 0.2, 0.4, 0.6, 0.8 and 1.0), were obtained by thermal decomposition method. The morphologies, crystal forms and valence states of the catalyst powders were analyzed by SEM, XRD and XPS, respectively. And the electrochemical properties, overpotentials and stabilities of Co_xCr_1-xO_3/2 electrodes for oxygen evolution reaction (OER) in an alkaline solution were evaluated by linear sweep voltammetry (LSV), staircase voltammetry and chronoamperometry, respectively. The results indicated that the mixtures of Co₃O₄ and eskolaite-Cr_{2 …}

Synthesis And Electrochemical Properties Of Cnts/V2O5 Hollow Microspheres, Liang Hao, Lai-Fa Shen, Jie Wang, Jia-Jia Zhu, Xiao-Chen Zhao, Xiao-Gang Zhang

Journal of Electrochemistry

The carbon nanotubes/vanadium oxides (CNTs/V₂O₅) hollow microspheres (VOC) were prepared via solvothermal process. The effects of the ratio for CNTs to V₂O₅ on the morphologies, structures and electrochemical performances were systemically investigated. The results indicate that CNTs dramatically enhanced the rate performances of VOC composite electrodes. When the ratio of CNTs is 7.1%, the VOC composite electrode exhibited the best electrochemical performance, which delivered a specific capacitance of 346 F·g^-1 at 0.5 A·g^-1 and maintained 75% at 8 A·g^-1 in 5 mol L^-1 LiNO₃. A hybrid capacitor …

A Platinum-Hydrogen Reference Micro-Electrode For All Vanadium Redox Flow Battery, Zhi-Bin Lin, Yan-Qing Dong, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

A platinum-hydrogen reference micro-electrode was made with electroplating Pd on the surface of Pt wire and then coating anion membrane material. This reference electrode was built-in the porous electrode of the all vanadium redox flow batteries (VRFB), and monitored the charging /discharging and self-discharging of the VRFB. The results indicated that the capacity fading of VRFB occurred due to the graduate reduction of V(IV) active species in the electrolyte and the accumulation of V(V) in the positive electrode, leading to nonequilibrium of active species between the positive and negative electrodes.

Electrochemical Conversion Reactions And Their Applications For Rechargeable Batteries, Ting Li, Han-Xi Yang

Journal of Electrochemistry

Electrochemical conversion reactions have received considerable interest as a new redox mechanism for constructing high capacity electrodes of rechargeable batteries. Without strict restrictions on the crystalline structure of the host lattice and the size of the associated ions, conversion reactions can take place in a variety of different metal compounds with different metal cations and deliver much higher reversible capacities through full utilization of all the oxidation states of the transition-metal compounds, opening up a new avenue for developing high capacity materials of rechargeable batteries. This paper briefly reviews the state of the art and challenges of conversion electrodes and …

Electrochemical Performance And Reaction Mechanism Of Li3Fe2(Po4)3/C Cathode Material, Yong Xie, Gui-Ming Zhong, Zheng-Liang Gong, Yong Yang

Journal of Electrochemistry

The cathode material of carbon coated Li₃Fe₂(PO₄)₃ (Li₃Fe₂(PO₄)₃/C) is successfully prepared by sol-gel method and ball-milling carbon coating technique. The cathode material is characterized by XRD, SEM, TEM, and in-situ XAFS techniques. XRD results indicate that the as prepared Li₃Fe₂(PO₄)₃ is of high purity and single phase, and has monoclinic structure with space group of P21/n. Electrochemical measurements show that the carbon-coated material is able to deliver a high initial discharge specific capacity of 128.6 mAh·g^-1 in …

Electrochemical Performance Of Coal2O4-Coated Lini1/3Co1/3Mn1/3O2, Ji-Jun Cai, Wang-Jun Cui, Bing Li, Yang-Yang Yu, Jin-Bao Zhao

Journal of Electrochemistry

A method to improve the electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ for high voltage lithium-ion battery by CoAl₂O₄ coating was present in this work. The effects of CoAl₂O₄ coatings on the structure and electrochemical properties of LiNi1/3Co1/3Mn1/3O2 were investigated in detail. The results show that CoAl₂O₄ forms a thin layer of 8 nm on the surface of LiNi_1/3Co_1/3Mn_1/3O₂ without destroying the structure of the core material. The CoAl₂O₄-coated LiNi_1/3Co_1/3Mn_1/3O …

Porous Co3O4 Hollow Nanospheres Cathode Catalyst For High-Capacity And Long-Cycle Li-Air Batteries, Tong Liu, Na Li, Qing-Chao Liu, Xin-Bo Zhang

Journal of Electrochemistry

In this paper, a high specific surface area of porous Co3O4 hollow nanospheres was successfully synthesized via hydrothermal carbonization at 140 °C, followed by calcination using cobalt nitrate hexahydrate (Co(NO3)2·6H2O), hexamethylenetetramine (HMT), sucrose, and sodium citrate (Na3C6H5O7). The porous Co3O4 hollow nanospheres consisted of nanoparticles with high specific surface area of mesoporous structure, and could provide active reaction sites for OER and ORR. When used as lithium-air battery cathode catalyst, the Co3O4/Super P (SP) electrode exhibited excellent cycle performance, resulting in high capacity and long life of lithium-air batteries.

Response Characteristics Of Solution-Gated Graphene Field Effect Transistors To Buffer Solution Ph And Concentration, Xiao-Wei Du, Ji Cheng, Hui Guo, Qing-Hui Jin, Jian-Long Zhao

Journal of Electrochemistry

High-sensitivity and low-noise solution-gated graphene field effect transistors (SGFETs) were fabricated using chemical vapor deposition (CVD) graphene as a channel material, and their response characteristics to concentration and pH of phosphate buffered saline (PBS) were measured. The minimum conductance point shifted to left with increasing concentration, and the offset showed a linear relationship with the natural logarithm of concentration. While, the minimum conductance point shifted to right with increasing pH, and the offset showed a linear relationship with pH. The research on these response characteristics may give proper guidance to SGFETs’s application.

Electrodeposition Of Al-Mg Alloys From Acidic Alcl3-Emic-Mgcl2 Room Temperature Ionic Liquids, Rostomali M., P. Abbott Andrew, S. Ryder Karl

Journal of Electrochemistry

Electrodeposition of aluminium-magnesium alloys have been carried out onto platinum and copper cathodes from Lewis acidic aluminium(III) chloride-1-ethyl-3-methylimidazolium chloride ionic liquid containing magnesium(II) chloride by constant current and constant potential methods at room temperature. Magnesium content in the deposited alloy increases with increasing MgCl₂ concentration in the ionic liquid and with increasing cathodic current density. The influences of various experimental conditions on electrodeposition and the morphology of the electrodeposited layers have been investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDAX). On increasing the deposition current densities the dense, bright, adherent …