Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

2013

Discipline
Institution
Keyword
Publication
Publication Type

Articles 91 - 120 of 154

Full-Text Articles in Physical Chemistry

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils May 2013

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils

Chemistry Faculty Publications

One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two different stainless steels at varying temperatures ranging from 300 °C to 350 °C in vacuum. Significant decomposition of the lubricant base-stocks and the phosphate ester additive did occur in most of the trials resulting in the formation of carboxylic acids and phenols. …

Go to article

A Comparative Study Of Ce3+/Ce4+ Redox Couple On Pt Electrode In Sulfuric Acid And Methanesulfonic Acid, Zhao-Hua Li, You-Qun Chu, Chun-An Ma Apr 2013

A Comparative Study Of Ce3+/Ce4+ Redox Couple On Pt Electrode In Sulfuric Acid And Methanesulfonic Acid, Zhao-Hua Li, You-Qun Chu, Chun-An Ma

Journal of Electrochemistry

The electrochemical oxidations of Ce3+ to Ce4+ on Pt rotating disk electrode (RDE) in both sulfuric acid and methanesulfonic acid (MSA) solutions were studied by using cyclic voltammetry and linear sweep voltammetry. The complexing behaviors of Ce3+/Ce4+ were preliminarily probed and the exchange current density, diffusion coefficient, as well as reaction rate constant were obtained from Butler-Volmer equation. The activation energies of Ce3+ oxidation on Pt electrode in two types of acidic media, obtained from Arrhenius equation, were also compared. The results indicate that Ce3+ can be oxidized to Ce4+ much easier in …

Go to article

An Electrochemical Impedance Spectroscopic Study Of Cuf2/Moo3/C Cathode Composites, Yue-Li Shi, Nan Wu, Ming-Fang Shen, Jia-Qun Dong, Quang-Chao Zhuang, Li Jiang Apr 2013

An Electrochemical Impedance Spectroscopic Study Of Cuf2/Moo3/C Cathode Composites, Yue-Li Shi, Nan Wu, Ming-Fang Shen, Jia-Qun Dong, Quang-Chao Zhuang, Li Jiang

Journal of Electrochemistry

Composite electrode of CuF2/MoO3/C was fabricated through high energy mechanical milling. The properties of CuF2/MoO3/C were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (TEM), galvanostatic charge-discharge measurements, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the grain sizes of CuF2 and MoO3 after milling were 200 ~ 300 nm, and the initial discharge capacity of CuF2/MoO3/C was 647 mAh·g-1 at room temperature and at a current density of 10 mA·g-1. However, the …

Go to article

Analysis Of The Material Factors In The Degradation Of Sofc Performance, Ke-Qing Gao, Xiao-Tian Liu, Qing Zhao, Li-Quan Fan, Yue-Ping Xiong Apr 2013

Analysis Of The Material Factors In The Degradation Of Sofc Performance, Ke-Qing Gao, Xiao-Tian Liu, Qing Zhao, Li-Quan Fan, Yue-Ping Xiong

Journal of Electrochemistry

Based on the cell operating conditions, the material factors which influence the cell performance of SOFC including the chemical stability of materials at solid-gas interface in redox atmosphere, the diffusion and reaction between the interface of solid-solid materials, and degradation caused by the external chemical substances brought into the cells at triple phase boundary are mainly analyzed. Given that under the current state of the research it is urgent to explore the material factors on degradation of cell performance to meet demands in SOFC applications.

Go to article

Electrochemical Activities Of Oxygen-Doped Carbon Surface For V(Iv)/V(V) Redox Couple, Huan Zhang, Lin-Lin Qin, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong, Zhao-Wu Tian Apr 2013

Electrochemical Activities Of Oxygen-Doped Carbon Surface For V(Iv)/V(V) Redox Couple, Huan Zhang, Lin-Lin Qin, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong, Zhao-Wu Tian

Journal of Electrochemistry

Graphite plate electrodes were treated with oxygen plasma and doped with oxygen as well as oxygen functional groups. With the treatment, the activities of graphite plate electrodes toward VO2+/VO2+ redox reactions were improved. FT-IR and EDS analysis results indicated that oxygen functional groups were introduced to the surface of graphite plates after oxygen plasma treatment. In this paper, the graphite plate treated for 20 min showed the highest activity. The average charge efficiency reached 91%, suggesting an increase of 19%, compared with that of the untreated graphite plate under a current density of 8 mA·cm-2 …

Go to article

Hydrothermal Synthesis Of Pure Li4Ti5O12 And Its Electrochemical Performance, Wen-Jun Xie, Yu-Shi He, Hong Wang, Xiao-Zhen Liao, Zi-Feng Ma Apr 2013

Hydrothermal Synthesis Of Pure Li4Ti5O12 And Its Electrochemical Performance, Wen-Jun Xie, Yu-Shi He, Hong Wang, Xiao-Zhen Liao, Zi-Feng Ma

Journal of Electrochemistry

Spinel Li4Ti5O12 was prepared by hydrothermal method using commercial anatase (TiO2) and lithium hydroxide (LiOH) as raw materials. The effects of the LiOH concentration of lithium hydroxide, hydrothermal reaction time and calcination temperature on the structure and electrochemical performance of Li4Ti5O12 were investigated. The formation process of Li4Ti5O12 was also proposed. The micro-structure and morphology wereas characterized by XRD, SEM, TEM techniques, and the electrochemical performance was analyzed by galvanostatic charge-discharge test. The results show that the pure phase spinel Li4Ti …

Go to article

Current Statuses And Prospects Of Bioeletrochemical Instruments, Ren Hu, Chun-Hui Piao, Chang-Jian Lin, Dong-Ping Zhan, Bin Ren, Amatore Christian, Zhong-Qun Tian Apr 2013

Current Statuses And Prospects Of Bioeletrochemical Instruments, Ren Hu, Chun-Hui Piao, Chang-Jian Lin, Dong-Ping Zhan, Bin Ren, Amatore Christian, Zhong-Qun Tian

Journal of Electrochemistry

Charge transfer is one of the essential life processes. In the past decades, the electrochemical methods have been developed to study life science in a unique physicochemical view and have exhibited abundant and precious information beyond conventional biological techniques. As bioelectrochemical research areas evolved from the fundamental studies of biomolecules’ electrochemical behaviours in non-living conditions to the living cells in intro and in vivo, and further to the single molecule in living systems, the role of instruments becomes more and more crucial. The performances of instruments such as sensitivity, resolution (time, spatial and eneygy resolutions) and controllability are more demanding …

Go to article

Preparation And Catalytic Properties Of Feco Alloy Nanocatalyst, Ming-Xuan Li, Jie-Lian Ou, Sheng-Pei Chen, Peng Wang, Bin-Bin Xu, Shi-Gang Sun Apr 2013

Preparation And Catalytic Properties Of Feco Alloy Nanocatalyst, Ming-Xuan Li, Jie-Lian Ou, Sheng-Pei Chen, Peng Wang, Bin-Bin Xu, Shi-Gang Sun

Journal of Electrochemistry

The FeCo alloy nanoparticles were electrodeposited on glassy carbon electrode by chronoamperometry and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results showed that the shapes of FeCo nanoparticles were cubes with an average size of 65 nm. The atom ratio of Fe and Co is 1:1. As indicated from the pattern of selected area electron diffraction (SAED), the FeCo cubic nanoparticles were single crystal which belonged to body-centered cubic with an interval of 0.201 nm referring to the (110) facets of FeCo alloy. The FeCo cubic nanoparticles exhibited the enhanced electrocatalytic …

Go to article

Fabrication And Localized Surface Plasmon Resonance Of Ultrathin Nanoporous Gold Films, Shi Feng, Shu Chen, Qing Yang, Juan Xiang Apr 2013

Fabrication And Localized Surface Plasmon Resonance Of Ultrathin Nanoporous Gold Films, Shi Feng, Shu Chen, Qing Yang, Juan Xiang

Journal of Electrochemistry

Ultrathin nanoporous gold films (NPGF) with a thickness of approximately 50 nm were fabricated via electrochemical dealloy method. The morphology of NPGF was evaluated with a parameter of surface roughness. SEM results demonstrate that the fabrication of NPGF with different roughness factors can be achieved by controlling the circles of cyclic voltammetry. UV-Vis spectra indicate that the localized surface plasmon resonance (LSPR) of NPGF is affected by the roughness of NPGF. With the optimal roughness factor, NPGF displays a linear relationship between the ethanediol concentration and the absorbance intensity at λ = 450 nm. The LSPR effect of NPGF presents …

Go to article

Electrochemical Synthesis Of Hierarchical Dendritic Polyaniline Nanostructures, Shao-Huang Weng, Jian-Zhang Zhou, Zhong-Hua Lin, Xin-Hua Lin Apr 2013

Electrochemical Synthesis Of Hierarchical Dendritic Polyaniline Nanostructures, Shao-Huang Weng, Jian-Zhang Zhou, Zhong-Hua Lin, Xin-Hua Lin

Journal of Electrochemistry

In this work, the p-TSA doped and hierarchical dendritic nanostructured polyanilines (PANI) have been prepared by potentiostatic electropolymerization without using any templates at room temperature. The mechanism of the polymerization has been discussed according to the electrodeposition curves. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were employed to confirm the formation of uniform hierarchical dendritic structure on PANI. UV-Vis spectroscopy (UV-Vis) and infrared spectroscopy (FTIR) proved that the prepared PANI is in the form of emeraldine salt. The templateless electrodeposition method is simple, easy to operate, can be applied to fabricate other nanostructures of conducting polymers.

Go to article

Performance Of Vn As Negative Electrode Materials In Electrochemical Capacitors, Zhao-Hui Gao, Hao Zhang, Gao-Ping Cao, Min-Fang Han, Yu-Sheng Yang Apr 2013

Performance Of Vn As Negative Electrode Materials In Electrochemical Capacitors, Zhao-Hui Gao, Hao Zhang, Gao-Ping Cao, Min-Fang Han, Yu-Sheng Yang

Journal of Electrochemistry

Nanocrystalline vanadium nitride (VN) materials were synthesized by high temperature ammonia (NH3) reduction of vanadium oxide (V2O5). The structure and morphology of VN materials were characterized by XRD, SEM and TEM, while the specific surface area, pore size distribution and supercapacitive behavior by N2 absorption, cyclic voltammetry (CV) and constant current charge-discharge measurements in 1 mol·L-1 KOH electrolyte. The results showed that the VN sample belonged to the cubic crystal system (Fm3m [225]), and had homogeneous surface and appeared nearly spherical with uniform size. As the reaction time was extended to 12 h, …

Go to article

Electrochemical Performance Of Lifepo4/C Synthesized Via Aqueous Solution-Evaporation Route, Ning-Yu Gu, Xing-Hua He, Yang Li Apr 2013

Electrochemical Performance Of Lifepo4/C Synthesized Via Aqueous Solution-Evaporation Route, Ning-Yu Gu, Xing-Hua He, Yang Li

Journal of Electrochemistry

The LiFePO4/C samples have been synthesized via an aqueous solution-evaporation route with LiH2PO4, FeC2O4.2H2O as raw materials and citric acid as a carbon source. X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to analyze structure and morphology of the samples. The electrochemical performances of the LiFePO4/C cathodes were characterized by charge/discharge cures and electrochemical impedance spectroscopy (EIS). The results show that the LiFePO4/C sample, calcined at 700 °C and contained 3.03% (by mass) carbon, exhibited a highly pure …

Go to article

Preparation And Methanol Electrooxidation Of Pt/Pmo12/Pedot/Gc Electrodes, Jing-Hua Ma, Rui-Xiang Wang, Yi-Liang Tan, Shan-Shan Wang, Yan-Qin Zhang, You-Jun Fan Apr 2013

Preparation And Methanol Electrooxidation Of Pt/Pmo12/Pedot/Gc Electrodes, Jing-Hua Ma, Rui-Xiang Wang, Yi-Liang Tan, Shan-Shan Wang, Yan-Qin Zhang, You-Jun Fan

Journal of Electrochemistry

Modification of phosphomolybdic acid (PMo12) on poly(3,4-ethylenedioxythiophene) (PEDOT) film (PEDOT/GC) obtained through the electrochemical polymerization was performed using adsorption method (PMo12/PEDOT/GC), followed by electrodepositing Pt on PMo12/PEDOT/GC to prepare Pt/PMo12/PEDOT/GC electrode. Effects of PMo12 and PEDOT on the methanol oxidation performance of electrode were investigated. Results showed that PMo12 obviously changed the morphology and structure of Pt loaded on the electrode, leading to the formation of sharp thorns at the edge of Pt nanostructures. Cyclic voltammetry and chronoamperometry data demonstrated that the catalytic activities of methanol electrooxidation on the Pt/PMo …

Go to article

The Electrochemical Capacitance Performance Of La1-XSrXCoo3 Perovskites, Yang Xu, Yan-Yan Bao, Long-Fei Du, Dian-Xue Cao, Gui-Ling Wang Apr 2013

The Electrochemical Capacitance Performance Of La1-XSrXCoo3 Perovskites, Yang Xu, Yan-Yan Bao, Long-Fei Du, Dian-Xue Cao, Gui-Ling Wang

Journal of Electrochemistry

In this paper, the La1-xSrxCoO3 (x = 0.2, 0.4, 0.6, 0.8) perovskites powders were synthesized by a sol-gel method. The perovskite phases were characterized by X-ray diffraction (XRD), while the electrochemical capacitance performance of La1-xSrxCoO3 electrodes in alkaline electrolyte was studied by cyclic voltammetry and galvanostatic charge/discharge test. It was found that the La0.6Sr0.4CoO3 electrode exhibited a specific capacitance of 325 F.g-1 in 6.0 mol.L-1 KOH electrolyte at a current density of 10 mA.cm-2, and the specific capacitance of 315 F.g …

Go to article

Synthesis And Electrochemical Performance Of Si/C Composite Modified By Pani, Guang-Hui Zhang, Pei-Kang Shen, Ge Sang, Ren-Jin Xiong Apr 2013

Synthesis And Electrochemical Performance Of Si/C Composite Modified By Pani, Guang-Hui Zhang, Pei-Kang Shen, Ge Sang, Ren-Jin Xiong

Journal of Electrochemistry

Silicon/carbon (Si/C) composite materials were prepared through high-energy ball milling and high-temperature solid-phase method, and then coated with thin polyaniline (PAni) film by oxidation. The microstructure and component of the composites were characterized by SEM, XRD, IR, TG, and the electrochemical performance was investigated by cyclic voltammetry (CV) and galvanostatic charge-discharge tests. The results showed that the surface of PAni/Si/G/C composite was coating with complete lamellar structure of PAni film. Its reversible capacity was 784 mAh·g-1 and 690 mAh·g-1 could be maintained after 50th charge-discharge cycles.

Go to article

Synthesis Of Lifepo4/C Cathode By Sol-Gel And Calcining Method With Chitosan Monomer, Jia Xu, Yan-Yan Wang, Rui Wang, Bo Wang, Yue Pan, Dian-Xue Cao, Gui-Ling Wang Apr 2013

Synthesis Of Lifepo4/C Cathode By Sol-Gel And Calcining Method With Chitosan Monomer, Jia Xu, Yan-Yan Wang, Rui Wang, Bo Wang, Yue Pan, Dian-Xue Cao, Gui-Ling Wang

Journal of Electrochemistry

The LiFePO4/C cathode materials for Li-ion battery were synthesized by sol-gel and calcining method using chitosan monomer as a carbon source and a gelating agent. The structures and morphologies were characterized by X-ray diffraction spectroscopy (XRD) and scanning electron microscopy (SEM). The electrochemical performance was investigated by the galvanostatic charge–discharge test. When the molar ratios between chitosan monomer and LiFePO4 were 1:1.2, the LiFePO4/C cathode calcined at 600 oC showed the best performance. The particle sizes ranged 200 ～ 400 nm. The initial discharge capacity of 155 mAh·g-1 was achieved at room temperature …

Go to article

Current Development Of Quantum Dots Based Electrochemiluminescence Immunosensors, Ling-Ling Li, Qian Lu, Jun-Jie Zhu Apr 2013

Current Development Of Quantum Dots Based Electrochemiluminescence Immunosensors, Ling-Ling Li, Qian Lu, Jun-Jie Zhu

Journal of Electrochemistry

Electrochemiluminescence exhibits the merits of both luminescence and electrochemistry analysis, and has been extensively employed in biosensors. Quantum dots are considered one of the three main kinds of electrochemiluminescence luminophores due to their unique properties. This paper briefly reviews the classification and signal amplification technology of quantum dots based electrochemiluminescence immunosensors. Future research trends are also suggested.

Go to article

Synthesis And Electrocatalysis Of Pdcu Alloy Nanocrystals, Hai-Bin Wu, Rui-Zhong Zhang, Wei Chen Apr 2013

Synthesis And Electrocatalysis Of Pdcu Alloy Nanocrystals, Hai-Bin Wu, Rui-Zhong Zhang, Wei Chen

Journal of Electrochemistry

Monodispersed PdCu alloy nanoparticles were synthesized by co-reduction of Cu(acac)2 and Pd(acac)2 with 1, 2-hexadecanediol. The spherical and popcorn-like shapes of PdCu alloy nanoparticles were obtained by changing the ratios of mixed surface protecting ligands of 1-octadecene, and oleylamine or oleic acid. TEM and XRD measurements showed that both PdCu nanoparticles are alloy nanocrystals dominated with (111) planes and the average sizes are 12.7 ± 0.18 and 20.4 ± 0.31 nm for he spherical and popcorn-like PdCu nanoparticles, respectively. The electrocatalytic activities of the PdCu nanocrystals for formic acid oxidation were evaluated by electrochemical cyclic voltammetry (CV). The result showed …

Go to article

Properties Of Carbon Coated Tin Negative Electrode For Lithium-Ion Battery, Gui-Chang Liu, Xiao-Xiao Shen, Li-Da Wang Apr 2013

Properties Of Carbon Coated Tin Negative Electrode For Lithium-Ion Battery, Gui-Chang Liu, Xiao-Xiao Shen, Li-Da Wang

Journal of Electrochemistry

Carbon coated tin power was prepared by decomposing glucose applying a hydrothermal method, and was further used as the active material for negative electrode of lithium secondary battery. Charge-discharge tests show that the carbon coated tin electrode with the addition of 5 wt.% acetylene black as a conductive agent could obtain an initial discharge capacity of 967 mAh·g-1 and a discharge capacity of 362 mAh·g-1 after 50 cycles, which is much higher than that of tin electrode (166 mAh·g-1 after 50 cycles). The coated carbon hinders the agglomeration of tin powder, reduces the irreversible capacity loss of …

Go to article

Patent: Dual Function Proteins For Treating Metabolic Disorders, Brian R. Boettcher, Shari L. Caplan, Susan E. Cellitti, Douglas S. Daniels, Norio Hamamatsu, Bernhard Hubert Geierstanger, Stuart Licht, Andreas Loew, Stephen Craig Weldon Apr 2013

Patent: Dual Function Proteins For Treating Metabolic Disorders, Brian R. Boettcher, Shari L. Caplan, Susan E. Cellitti, Douglas S. Daniels, Norio Hamamatsu, Bernhard Hubert Geierstanger, Stuart Licht, Andreas Loew, Stephen Craig Weldon

Chemistry Faculty Publications

The present invention relates to new proteins comprising fibroblast growth factor 2 1 (FGF21 ) and other metabolic regulators known to improve metabolic profiles in subjects to whom they are administered.

Go to article

Novel Algorithms And Instrumentation For Vibrational Spectroscopic Methods Of Analysis, Mohamed F. Abdelkader Apr 2013

Novel Algorithms And Instrumentation For Vibrational Spectroscopic Methods Of Analysis, Mohamed F. Abdelkader

Chemistry & Biochemistry Theses & Dissertations

Raman spectroscopy is a form of vibrational spectroscopy that has been increasingly applied to qualitative analysis of chemicals, explosives, pharmaceuticals, and fuels due to its non-invasive and non-destructive nature; its ease of sampling; and its high molecular specificity. These characteristics of Raman spectroscopy also facilitate its use for both in-line and at-line analysis. The principle limitation of Raman spectroscopy is optical interference arising from both analyte and non-analyte fluorescence. In this dissertation, a solution to this problem is presented in the form of a novel spectrometer design which operates in a sequentially shifted excitation mode to eliminate fluorescence backgrounds, fixed …

Go to article

Patent: Fusion Proteins For Treating Metabolic Disorders, Brian R. Boettcher, Shari L. Caplan, Douglas S. Daniels, Norio Hamamatsu, Stuart Licht, Stephen Craig Weldon Mar 2013

Patent: Fusion Proteins For Treating Metabolic Disorders, Brian R. Boettcher, Shari L. Caplan, Douglas S. Daniels, Norio Hamamatsu, Stuart Licht, Stephen Craig Weldon

Chemistry Faculty Publications

The invention relates to the identification of fusion proteins comprising polypeptide and protein variants of fibroblast growth factor 21 (FGF21) with improved pharmaceutical properties. Also disclosed are methods for treating FGF21 associated disorders, including metabolic conditions.

Go to article

Use Of Soybean Lecithin In Shape Controlled Synthesis Of Gold Nanoparticles, Benjamin Robert Ayres Mar 2013

Use Of Soybean Lecithin In Shape Controlled Synthesis Of Gold Nanoparticles, Benjamin Robert Ayres

Dissertations and Theses

The work presented in this dissertation is a composite of experiments in the growth of gold nanoparticles with specific optical properties of interest. The goal is to synthesize these gold nanoparticles using soybean extract for not only shape control, but for propensity as a biocompatible delivery system. The optical properties of these nanoparticles has found great application in coloring glass during the Roman empire and, over the centuries, has grown into its own research field in applications of nanoparticulate materials. Many of the current functions include use in biological systems as biosensors and therapeutic applications, thus making biocompatibility a necessity. …

Go to article

Density Functional Theory And The Calculation Of Tcmg2O4 Spinel Lattice Parameters, Jon Karlo Macias Mar 2013

Density Functional Theory And The Calculation Of Tcmg2O4 Spinel Lattice Parameters, Jon Karlo Macias

Physics

The cohesive energy, lattice constant and bulk modulus of two simple HCP crystal structures of magnesium and technetium were calculated using the vienna ab initio simulation package (VASP) which is based on density functional theory (DFT). The same properties were determined for TcMg2O4 spinel. The theoretical results of the lattice constant of the pure crystals were compared to experimental results and found to be in excellent agreement with a difference of less than 2%. The results for the lattice constant of the TcMg2O4 spinel were found to be in excellent agreement as well with …

Go to article

Physical Essentials Of Rotating Complex Impedance Diagram In Some Electrochemical Systems, Bing-Liang Wu Feb 2013

Physical Essentials Of Rotating Complex Impedance Diagram In Some Electrochemical Systems, Bing-Liang Wu

Journal of Electrochemistry

The essential of the rotation of complex impedance diagram in some electrochemical systems is discussed. It is attributing to that the electrochemical capacitance usual is not simple real capacitor but must be complex number capacitance. As the examples: 1, the metal/support electrolyte electrode in the ideal polarization condition, the capacitance must be that of the electrochemical double layer and represents complex number properties. Its complex impedance diagram was not a line parallel to imaginary axis but rotated clockwise α=arctgC"/C'. 2, In the case of insertion/desertion electrodes, the capacitance must be that of the solid electrolyte interphase (SEI). The rotation of …

Go to article

Combination And Applications Of Time-Resolved Surface Plasmon Resonance Spectroscopy And Electrochemical Methods, Yu Bao, Yan Mao, Wei Wang, Zheng-Gang Li, Li Niu Feb 2013

Combination And Applications Of Time-Resolved Surface Plasmon Resonance Spectroscopy And Electrochemical Methods, Yu Bao, Yan Mao, Wei Wang, Zheng-Gang Li, Li Niu

Journal of Electrochemistry

Electrochemical-surface plasmon resonance (EC-SPR) technique, developed in recent years, is a new technology which combines time-resolved surface plasmon resonance spectroscopy and electrochemical methods. Surface plasmon resonance (SPR) is a physical phenomenon generated by optical coupling using a metallic thin film and is very sensitive to optical analysis. The principles of SPR and EC-SPR are briefly introduced and the applications of the combination of SPR spectroscopy with electrochemical techniques are reviewed in this paper. This new technology has been widely used in such research areas as reaction dynamics, biochemical sensors, electrode/electrolyte interfaces, kinetic parameters and bimolecular interactions.

Go to article

High Performance Membrane Electrode Assembly With Low Platinum Loadings Prepared By Atomic Layer Deposition For Pemfc Application, Ting Shu, Shi-Jun Liao, Chien-Te Hsieh, Ay Su Feb 2013

High Performance Membrane Electrode Assembly With Low Platinum Loadings Prepared By Atomic Layer Deposition For Pemfc Application, Ting Shu, Shi-Jun Liao, Chien-Te Hsieh, Ay Su

Journal of Electrochemistry

A high performance membrane electrode assembly (MEA) with low platinum loadings was successfully prepared with atomic layer deposition (ALD) technique. The anode of the MEA was prepared by depositing platinum on the carbon paper substrate, which was prepared by coating the slurry of carbon black (XC-72R) and Teflon, followed by drying and calcining at 350 °C. The MEAs consisted of the ALD anode or commercial catalyst anode, pretreated Nafion membrane (Nafion-117) and commercial cathode. Performances of MEAs were measured by single cell testing, and the anodes and MEAs were characterized by CV, SEM, TEM and XRD. The results revealed that …

Go to article

Electrochemical Performance Of Fe3O4/C Composites As Negative Material For Lithium-Ion Batteries, Jun-Jie Cai, Shu Yao, Ze-Sheng Li, Hui Meng, Pei-Kang Shen Feb 2013

Electrochemical Performance Of Fe3O4/C Composites As Negative Material For Lithium-Ion Batteries, Jun-Jie Cai, Shu Yao, Ze-Sheng Li, Hui Meng, Pei-Kang Shen

Journal of Electrochemistry

The Fe3O4/Carbon composites have been synthesized through coprecipitation pathway and by insitu aniline polymerization as a carbon source. Structural characterization and morphological study of the composites were investigated by using XRD, SEM and TEM techniques. The results showed that the nanosized Fe3O4 particles (40 ~ 80 nm) were encapsulated in the amorphous carbon. During the electrochemical tests, the Fe3O4/C composites exhibited high capaticity and excellent cycle ability, the retention of capaticity was about 1000 mAh·g-1 after 30 cycles of charge/discharge tests at 50 mA·g-1.

Go to article

A Comparative Study Of Charge-Discharge Behaviors Of α-Pbo2 And β-Pbo2 Cathodes, Cong-Ying Cui, Xue-Mei Ma, De-Long Kong, Hou-Yi Ma Feb 2013

A Comparative Study Of Charge-Discharge Behaviors Of α-Pbo2 And β-Pbo2 Cathodes, Cong-Ying Cui, Xue-Mei Ma, De-Long Kong, Hou-Yi Ma

Journal of Electrochemistry

The α-PbO2 and β-PbO2 powders were prepared using simple chemical synthetic methods, and their crystalline structures and surface morphologies were characterized with X-ray powder diffraction spectroscopy and scanning electron microscopy. Using the as-synthesized α-PbO2 and β-PbO2 powders as positive active materials, the electrochemical performance of the two PbO2 materials was investigated by means of cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy. The results indicate that the discharge capacity of α-PbO2 electrode is larger than that of β-PbO2; moreover, the composite electrodes made by α-PbO2 and β-PbO2 mixtures with …

Go to article

An In Situ Ftir Spectroelectrochemical Study On Methanol Oxidation At Pt-Mo2C/Gc Catalyst, Hai-Ping Huang, Xi-Yu Yao, Pei-Kang Shen Feb 2013

An In Situ Ftir Spectroelectrochemical Study On Methanol Oxidation At Pt-Mo2C/Gc Catalyst, Hai-Ping Huang, Xi-Yu Yao, Pei-Kang Shen

Journal of Electrochemistry

A 40% Pt on Mo2C/GC catalyst has been prepared by ion exchange method. The mechanism of methanol electrooxidation on Pt-Mo2C/GC and commercial Pt/C catalysts in acidic media was studied by cyclic voltammetry, XRD measurements and in-situ Fourier transform infrared spectroelectrochemistry. The results revealed that the Pt nanoparticles were uniformly dispersed on Mo2C/GC with an average particle size of 3 nm. The cyclic voltammetric and chronopotentiometric experiments indicated that Pt-Mo2C/GC catalyst exhibited a better performance for methanol oxidation than that of Pt/C in acid solution. A negative shift over 90 mV of the …

Go to article

First Prev Next Last