Physical Chemistry Commons^™

Study On The New Technique Of Cu Micro-Plating Based On Ceramics, Zhi-Jun Gu, Xiong-Chao Zhao, Qi-Long Guo, Yan-Ping Hong, Qun-Shan Deng, Ren-Huan Chen

Journal of Electrochemistry

By combing the computer processing system (including the design of the line and the pattern, the choice of the scanning area and the treatment of the activation) with the electroless-plating technology, this article provides a new approach for the micro-plating based on the ceramics. The copper film based on ceramics with good properties can be obtained under the mild operating conditions. The line resolution is 35 μm and the wiring speed is 50 mm/s. The results had also showed that the quality of the copper plating is closely related to the roughness of the ceramic substrates.

The Mechanism Of The Improvement On Cycling Performance And Thermal Stability Of Lini0.8Co0.2O2 By Ti-Doping, Han-San Liu, Jie Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

Improved cycling performance and enhanced thermal stability were observed for Ti-doped LiNi_0.8Co_0.2O₂ cathode materials. The mechanism of these positive effects was investigated in this work. The improved cycling performance of Ti-doped cathodes is ascribed to the suppression of phase transitions and lattice changes during cycling, and the decrease of interfacial reaction activity between the cathode and electrolyte. The enhanced thermal stability of Ti-doped cathodes is attributed to the suppression of thermal decomposition reaction of delithiated cathode material, which will produce heat and oxygen gas as the cause of electrolyte decomposition and combustion reaction.

Electrochemical Performance Of Gel Polymer Electrolyte Prepared By Thermal Initiating Polymerization Of Acrylates, Jin-Dan Piao, Li-Xia Yuan, Xin-Ping Ai, Han-Xi Yang, Yu-Liang Cao

Journal of Electrochemistry

A gel polymer electrolyte was prepared by thermal initiating polymerization of the acrylates in the EC/EMC/DMC electrolyte solution at 100℃. The LiCoO₂/MCMB polymer cells were assembled and their electrochemical properties were evaluated at various charge-discharge rate and temperatures. The ionic conductivity of the polymer electrolyte containing 85wt.% liquid electrolyte is around 3.2×10^-3 S·cm^-1  at 20℃ and 5.6×10^-4 S·cm^-1 at -30℃ respectively. The gel polymer electrolyte has good electrochemical stability up to 4.5V versus Li/Li⁺.The first charge-discharge efficiency of the polymer cell at 0.2C rate is almost 92.1%. The discharge capacity of the …

The Electrophoretic Deposition Of Nano Hydroxyapatite Coating On Titanium Surface, Fei Chen, Chang-Jian Lin, Zhou-Cheng Wang

Journal of Electrochemistry

A hydroxyapatite coating with nano-structure on the roughened titanium surface was prepared by electrophoretic deposition process. To decrease sintering temperature the HAp nanoparticles synthesizedby a wet chemical method was used. It is observed that the coating is uniform without cracks. After sintering the nano-strueture of HAp coating remains unchanged. The surface treatment of Ti is applied to form a distribution of small pits and TiO₂ thin layer that improve the adhesion of coatingto Ti substrate. It is shown that the bonding strength of coating is as high as 18±2.5MPa. The hardness and Young's modulus are 40.6 and 0.42 GPa, …

Application Of Carbon Paste Electrode On The Electrogenerative-Leaching Process Of Sulfide Minerals, Shao-Fen Wang, Zheng Fang, Yun-Yan Wang

Journal of Electrochemistry

The cyclic voltammetry curves of sulfide mineral electrodes or corresponding carbon paste electrodes in NaCl electrolytes have been obtained in this study. The experimental results indicate that acetylene black (revealed) the electro-catalytic propertyin the electrogenerative-leaching process of sulfide minerals. The output currentand potential of carbon paste electrodes were increased to some degrees while the activation energies were lower.

Preparation And Electrochemical Property Of Aao Nano-Channels Filled With Nio, Chi Gu, Jun-Mei Yan, Yong Yang

Journal of Electrochemistry

The AAO template with nano-channels was synthesized and filled with transient metal-oxide NiO by sol-gel method, and their electrochemical properties were primarily studied. The results showed that the porous nano-channels were well defined with the diameter about 50nm. The nano-structured NiO was filled into the template's nano-channels successfully. Cyclic voltammetry studies show that the NiO in AAO template has good cycle stability. It was suggested that the AAO-metal-oxides composites could be used as novel anode materials for Lithium ion battery.

Preparation Of Poly (Bromophenol Blue) Modified Glassy Carbon Electrode And Its Electrocatalytic Activity, Wei Chen, Hong-Bin Luo, Xin-Hua Lin

Journal of Electrochemistry

A film of poly (bromophenol blue) was formed on a glassy carbon electrode by using cyclic voltammetry. A stable film could be obtained with a potential range from -1.0 V to +1.8 V (vs.Ag/AgCl). The experimental results showed that the poly (bromophenol blue) modified glassy carbon electrode could catalyse the oxidation of ascorbic acid. It decreased the oxidation potential by about 270mV but increased the peak current. Meanwhile, this electrode showed a good linear current response for the ascorbic acid range from 2.5 to 250 (g/mL).

Electrochemical Properties Of Polymeric Gel Electrolyte With Gbl/Ec As Plasticizers, Yu-Wen Liu, Yong Zhang, Xiao-Long Li, Qi-Ping Gu, Cui-Fen Zhang, Yu-Dong Huang

Journal of Electrochemistry

Polymeric gel electrolytes (GPE) based on PMMA and PVDF-HFP were prepared using the binary mixtures of γ-butyrolactone (GBL) and ethylene carbonate (EC) as plasticizers. The ionic transport properties and electrochemical stability were studied. The room temperature conductivity reached 1.2 mS·cm^-1, electrochemical stability window exceeded 4.5V. The interfacial stability between GPE and lithium electrode was also investigated. The lithium metal polymer battery (LMPB) prepared with the GPE showed better charge and discharge life cycle when the the lithium metal electrode was treated with 1,4-dioxane.

Research On Phenol Wastewater Treatment By Electrochemical Oxidation, Tian-Cheng Li, Shen-Lin Zhu

Journal of Electrochemistry

Electrochemical oxidation is an effective technology for the phenol wastewater treatment, and the anode properties are important to the electrochemical oxidationefficiency. The over-potentials of oxygen evolution have been measured for thestainless steel, feasible graphite and SnO₂/Ti anode respectively. Moreover, the synthetic phenol wastewater was treated by the electrochemical oxidation with the stainless steel or feasible graphite anodes. The experimental results showed that the order of the over-potential is SnO₂/Ti > graphite > stainless steel; meanwhile, the COD values of purified water were approaching to or less than 100 mg·L^-1, and the phenol concentrations in the purified …

Synthesis Of Relatively Highly Magnetic Nano-Sized Nizn-Ferrite In Microemulsion At 45 Oc, Vuk Uskoković, Miha Drofenik

Pharmacy Faculty Articles and Research

The procedure for the preparation of NiZn-ferrite powder with average particle size of 10 nm and saturation magnetization of 50 emu/g by using precipitation reaction between acidified sulphate precursor salts and NH4OH as the precipitating agent in the water-in-oil domain of the microemulsion CTAB/1-hexanol/water at 45 oC is presented herein. TEM measurements have revealed relatively uniform morphology of the particles, which are associated in coral-like agglomerates. EDS measurements have been used for qualitative analysis of the sample, whereby FAAS measurement has been performed in order to reveal the proportion of the cations in the sample - Ni : Zn : …

Planar-To-Tubular Structural Transition In Boron Clusters: B20 As The Embryo Of Single-Walled Boron Nanotubes, Boggavarapu Kiran, Satya S. Bulusu, Hua-Jin Zhai, Soohaeng Yoo, Xiao Cheng Zeng, Lai-Sheng Wang

Xiao Cheng Zeng Publications

Experimental and computational simulations revealed that boron clusters, which favor planar (2D) structures up to 18 atoms, prefer 3D structures beginning at 20 atoms. Using global optimization methods, we found that the B₂₀ neutral cluster has a double-ring tubular structure with a diameter of 5.2 Å. For the B₂₀^- anion, the tubular structure is shown to be isoenergetic to 2D structures, which were observed and confirmed by photoelectron spectroscopy. The 2D-to-3D structural transition observed at B₂₀, reminiscent of the ring-to-fullerene transition at C₂₀ in carbon clusters, suggests it may be considered as the embryo …

Immobilization Of Fission Iodine By Reaction With A Fullerene Containing Carbon Compound And Insoluble Natural Organic Matrix: Quaterly Report October-December 2004, Spencer M. Steinberg

Separations Campaign (TRP)

We have conducted a large number of experiments to determine the possible reaction of iodate with sphagnum peat moss. These experiments indicate that the natural organic material reacts with iodate resulting in the formation of organically bound iodine and/or iodide in solution.

In the last quarter, we have conducted a number of experiments at various pHs and several temperatures (70oC, 60oC and 40oC). The reaction of iodate with peat follows pseudo first-order kinetics, although the reaction rate does appear to decrease significantly with reaction time. As noted in a previous report organically bound iodine appears to go through a maximum …

Temperature And Ph Dependence Of The Cyclization Of Creatine: A Study Via Mass Spectrometry, Brian J. Diamond

Theses, Dissertations and Capstones

The creatine to creatinine cyclization is of significant biological importance, providing energy for muscle cells and indicating proper renal function. From a chemical perspective, the rate at which creatine cyclizes to form creatinine has interested researchers since the late 1920s, but the cyclization is poorly understood both energetically and mechanistically. Mass spectroscopy was used to determine the rate of creatine cyclization as a function of temperature and pH. Using these values, the energetic parameters, activation energy and Arrhenius factor, were determined as a function of pH to better understand this reaction and ultimately determine the mechanistic process for this reaction. …

Yba2cu3o7 Electro-Magneto-Optic Effects In Ba L2,3 X-Ray Absorption Near Tc, Juana Vivó Acrivos

Faculty Publications, Chemistry

The onset of electro magneto-optic effects, observed at the Ba L2,3 edges synchrotron X-ray absorption by a YBa2Cu3O7 single crystal, 10 K above the transition temperature to superconductivity, Tc ~ 92 K is used to identify the role played by the Ba donor layer in the transition to superconductivity in the CuO2 layers. Negative permeability leads to Faraday rotation of the transmitted beam below T = 112 to 56 K for the 22 μm thick single crystal (c-axis orientation of 8π/18 relative to εX-rays) and sharp changes in the density of empty final states lead to zero transmitted radiation in …

Comparative Study Of Structural Properties Of Yba2cu3o7 Thin Films On Srtio3 Single Crystal And Bicrystal Substrates By X- Ray Diffraction, M. Navacerrada, A. Mehta, H. Sahibudeen, Juana Acrivos

Faculty Publications, Chemistry

We present a comparative study in terms of structural properties deduced from X - ray diffraction diagrams between YBa2Cu3O7 (YBCO) thin films fabricated on SrTiO3 (STO) single crystal substrates and bicrystallines substrates with a symmetrical tilt angle of 24 degrees. Periodic Lattice Distortions (PLD) have been observed around different Bragg peaks in YBCO thin films deposited on STO bicrystals while only diffraction peaks have been measured in the diagrams corresponding to the YBCO thin films deposited on STO single crystal substrates. Only in regions situated a 3.5 mm at both sides of the grain boundary the PDL have been investigated. …

Response To "Kinetic And Mechanistic Studies Of The Recombination Of Oh With No2: Vibrational Deactivation, Isotopic Scrambling And Product Isomer Branching Ratios", J. Stutz, A. R. Ravishankara, J. A. Pyle, A. Tuck, M. J. Evans, H. Herrmann, M. P. Chipperfield, R. Zellner, H. Roscoe, D. E. Shallcross, R. A. Cox, P. S. Monks, S. R. Arnold, D. S. Stevenson, D. E. Heard, J. J. Remedios, R. P. Wayne, E. A. Cohen, T. Brauers, A. J. Orr-Ewing, M. A. Blitz, L. Wang, G. Duxbury, T. Dibble, C. A. Taatjes, W. Eisfeld, P. W. Seakins, A. Kovács, S. Dóbé, E. Farkas, T. Ingham, D. Rowley, C. E. Kolb, Thomas Alex Stephenson, A. J. Hynes, N. M. Donahue, I. W. M. Smith, D. Self, D. J. Donaldson

Chemistry & Biochemistry Faculty Works

No abstract provided.

Predicted Properties Of Microhollow Cathode Discharges In Xenon, J. P. Boeuf, L. C. Pitchford, K. H. Schoenbach

Bioelectrics Publications

A fluid model has been developed and used to help clarify the physical mechanisms occurring in microhollow cathode discharges (MHCD). Calculated current-voltage (I-V) characteristics and gas temperatures in xenon at 100 Torr are presented. Consistent with previous experimental results in similar conditions, we find a voltage maximum in the I-V characteristic. We show that this structure reflects a transition between a low-current, abnormal discharge localized inside the cylindrical hollow cathode to a higher-current, normal glow discharge sustained by electron emission from the outer surface of the cathode. This transition, due to the geometry of …

Near-Edge X-Ray Absorption Fine Structure Study Of Ion-Beam-Induced Phase Transformation In Gd2(Ti1-Yzry)2o7, Ponnusamy Nachimuthu, S. Thevuthasan, V. Shutthanandan, E. M. Adams, W. J. Weber, B. D. Begg, D. K. Shuh, Dennis W. Lindle, Eric M. Gullikson, Rupert C. Perera

Chemistry and Biochemistry Faculty Research

The structural and electronic properties of Gd₂(Ti_1−yZr_y)₂O₇ (y=0–1) pyrochlores following a 2.0-MeV Au²⁺ ion-beam irradiation (~5.0 X 10¹⁴ Au²⁺/cm²) have been investigated by Ti 2p and O 1s near-edge x-ray absorption fine structure (NEXAFS). The irradiation of Gd₂(Ti_1−yZr_y)₂O₇ leads to the phase transformation from the ordered pyrochlore structure (Fd3m) to the defect fluorite structure (Fm3m) regardless of Zr concentration. Irradiated Gd₂(Ti_{1−y …}

Fragmentation Dynamics Of H2s Following S 2p Photoexcitation, Renaud Guillemin, S-W Yu, Wayne C. Stolte, Dennis W. Lindle

Chemistry and Biochemistry Faculty Research

The fragmentation dynamics of core-excited H₂S has been studied by means of partial anion and cation yield measurements around the S L_2,3-subshell ionization thresholds. All detectable ionic fragments are reported, and significant differences between partial ion yields are observed. Possible dissociation pathways are discussed by comparison to previous studies of electron spectra.

Immobilization Of Fission Iodine By Reaction With A Fullerene Containing Carbon Compound And Insoluble Natural Matrix, Spencer M. Steinberg, Gary Cerefice, David W. Emerson

Separations Campaign (TRP)

The recovery of iodine released during the processing of used nuclear fuel poses a significant challenge to the transmutation of nuclear waste. Iodine-129, a long-lived fission product formed by both commercial nuclear power generation and nuclear weapons production, is released when reprocessing nuclear fuel. Since iodine can be concentrated in the human thyroid, any uncontrolled release of iodine may result in an increased rate of thyroid cancer in the exposed population. For this reason, recovery of iodine is important for implementing any nuclear transmutation strategy.

The stability of the association of iodine with FCC and NOM products are studied. Product …

Development, Fabrication And Study Of Fullerene-Containing Carbon Material (Fcc) For Immobilization Of Iodine: Progress Report #1-4, Michael Savopulo, Boris E. Burakov

Separations Campaign (TRP)

During current reporting period the experiments on synthesis of ceramic-like material by conversion of iodine-doped FCC and activated carbon to Si_xC_y have been completed. Cold pressed granules of FCC and activated carbon were rinsed in water-ethanol solution of tetraethoxysilane (TEOS), Si(OC₂H₅)₄, and then used for further synthesis. All new samples obtained have been studied using precise powder XRD analysis.

Development, Fabrication And Study Of Fullerene-Containing Carbon Material (Fcc) For Immobilization Of Iodine: Final Report 2005, Michael Savopulo, Boris E. Burakov

Separations Campaign (TRP)

Immobilization of highly radioactive and long-lived isotope of ¹²⁹I, which is a fission product in spent nuclear fuel, requires development of new durable host-materials.

Iodine is a very volatile chemical element, and even its chemically strong compounds such as AgI and CuI are not stable under ultraviolet irradiation or oxidizing conditions. Therefore, development of host materials for iodine immobilization is based on unusual approach – the search and testing of new compounds which were not studied before in respect of iodine sorption and strong fixation.

Although FCC material demonstrated high loading capacity to iodine sorption it is necessary to …

Evaluation Of Fluorapatite As A Waste-Form Material, Dennis W. Lindle, Oliver Hemmers, Dale L. Perry

Separations Campaign (TRP)

Argonne National Laboratory has proposed a new extraction procedure to handle TRISO-coated fuels, the Fluoride Extraction Process, or FLEX. The FLEX process is designed to separate the uranium in the fuel from the actinides and most fission products by taking advantage of the unique properties of uranium hexafluoride (UF₆). In the FLEX process, the used TRISO fuel is reacted with zirconium fluoride salt, forming UF₆ and the fluoride salts of the actinides and fission products. At process temperatures, the UF₆ volatizes into a gas, and is released from the molten salt mixture. This leaves behind the …

Development Of Fluorapatite As A Waste Form: Final Report #280204-1, Boris E. Burakov

Separations Campaign (TRP)

In the framework of Agreement #280204 (first year) it was necessary to review methods of apatite synthesis; identify optimal procedure of precursor preparation; obtain and study first fluorapatite samples. Although, some apatite-based ceramics were successfully synthesized using co-precipitated precursors and sintering method, there are still a lot of uncertainties related to optimal apatite doping with different radionuclides and non-radioactive elements. It is necessary to provide complete incorporation of waste elements into apatite crystalline structure avoiding formation of separate phases of radionuclides. Also, it is important to note that real waste streams might contain radionuclides with essentially different chemical features such …

Electrochemical Separation Of Curium And Americium, David W. Hatchett, Kenneth Czerwinski

Separations Campaign (TRP)

The objective of this project is to use electrochemical techniques to develop a thermodynamic understanding of actinide and lanthanide species in aqueous solution and use this data to effectively separate species with very similar chemical properties. In consultation with our DOE collaborator, electrochemical methods and materials will be evaluated and used to exploit the thermodynamic differences between similar chemical species enhancing our ability to selectively target and sequester individual species from mixtures.

The following were specific goals for this year:

• To develop a fundamental understanding of the thermodynamic properties of actinide and lanthanide species such as Cm, Am, Ce, Nd, …

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System: Quarterly Report, Kenneth Czerwinski, Cynthia-May Gong, Amber Wright

Separations Campaign (TRP)

The speciation of hexavalent U and tetravalent Pu will be examined in the TBPdodecane- nitric acid systems. This topic is chosen based on data needs for separation modeling identified by the AFCI. Emphasis will be placed on studying the influence of nitrate and acetohydroxamic acid on U and Pu speciation as well as conditions where a third phase forms in the organic phase. The organic phase will be 30 % TBP in dodecane. Equal volumes of aqueous and organic phase will be used. The speciation of the actinides in the aqueous and organic phase will be determined by a number …

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System, Kenneth Czerwinski, Byron Bennett

Separations Campaign (TRP)

The research objectives of this project are as follows:

• To determine the influence of nitrate on the speciation of U and Pu in the TBP-dodecane-nitric acid system. The aqueous and organic speciation of U and Pu are examined as a function of the nitric acid concentration, nitrate concentration (by the addition of NaNO₃), actinide ion concentration, temperature, and time.
• To determine the speciation of U and Pu with AHA in the presence and absence of TBP-dodecane organic phase. The aqueous and organic speciation of U and Pu are evaluated as a function of AHA concentration, metal ion concentration, …

Anion And Cation-Yield Spectroscopy Of Core-Excited Sf6, Maria Novella Piancastelli, Wayne C. Stolte, Renaud Guillemin, A. Wolska, M. M. Sant'anna, Dennis W. Lindle

Chemistry and Biochemistry Faculty Research

We report an extensive study on total and partial-ion-yield spectroscopy around both the S 2p and F 1s thresholds in SF₆. All positive and negative single-ion channels have been measured. Below the F 1s threshold we detect a large variation in relative intensity of the resonant structures according to the specific channel monitored, indicating selective fragmentation. Above threshold, at variance with previous cases described by us, we detect high-intensity structures related to shape resonances not only in the cation channels but also for the anions. We discuss the applicability and limits of a model we …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 2nd Quarter Report, 2005, Clemens Heske

Fuels Campaign (TRP)

The goal of our project is to investigate interface corrosion processes in TRISO nuclear fuel particles. For this purpose, we are undertaking a detailed study of the interface formation between potential candidates for metallic fission products (Pd, Ag, and Cs), likely to diffuse from the kernel of the TRISO particles, with the TRISO coating layers. As a starting point, we are investigating the Pd/SiC interface and will extend our studies to Ag/SiC during our current summer research campaign. The experimental approach comprises the preparation of metal/SiC interfaces in-situ in our ultra-high vacuum system by electron-beam deposition. In order to understand …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 1st Quarter Report, 2005, Clemens Heske

Fuels Campaign (TRP)

In this project we utilize a combination of state-of-the-art soft X-ray spectroscopies to understand the chemical bonding between metal fission products (Pd and Ag) with coating layers in TRISO fuel particles (SiC and pyrocarbon). We are primarily focusing on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress. In the current first project year, we are beginning these investigations with the Pd/SiC interface, as discussed in the previous two quarterly reports. Our first experiments (both using our lab …