Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

2002

Discipline
Institution
Keyword
Publication
Publication Type

Articles 31 - 60 of 86

Full-Text Articles in Physical Chemistry

Pure Hap Film Prepared By Direct Electrodepositing On Metallic Surface And Its Mechanism, Hao-Bing Hu, Chang-Jian Lin, Fei Chen, Ren Hu, Ming Guo Aug 2002

Pure Hap Film Prepared By Direct Electrodepositing On Metallic Surface And Its Mechanism, Hao-Bing Hu, Chang-Jian Lin, Fei Chen, Ren Hu, Ming Guo

Journal of Electrochemistry

In controlling concentration of Ca2+ and PO43- in electrodeposition solution, the HAP film on Ti alloy has been deposited directly. Using XRD and SEM we have learned that prepared HAP is intact in crystal and equal in dimension. Thermodynamic calculation indicated that the HAP is easer formation of than that TCP of. With the XRD, SEM analyses and thermodynamic calculation, the electrodeposition mechanism has been discussed. It was proved that electrodepositon is a two-stage process and formation of HAP is a direct process from solution ions to HAP crystal without precursor.

Go to article

Electrochemical Techniques For Measuring Anti-Corrosion Behavior Of The Thin Corrosion Inhibitor Layer To The 907a Steel, Yong-Tao Zhao, Jian-Hua Wu, Fan-Cai Chen, Zhong-Ping Gao, Jia Wang, Chang-Jiu Zhao Aug 2002

Electrochemical Techniques For Measuring Anti-Corrosion Behavior Of The Thin Corrosion Inhibitor Layer To The 907a Steel, Yong-Tao Zhao, Jian-Hua Wu, Fan-Cai Chen, Zhong-Ping Gao, Jia Wang, Chang-Jiu Zhao

Journal of Electrochemistry

The corrosion inhibiting behavior of 907A steel, which was covered with thin inhibitor layers in moist seawater atmosphere,was studied. The electrochemical measurements, including EIS method and the coulostatic method, were used to atmospheric corrosioed monitor (ACM) under thin inhibitor layers to determine its corrosion rate. The results shown that the application of electrochemical methods such as the coulostatic technique and EIS could readily detect the on going process of film formation. Hence, the rapid evaluation of the thin inhibitor layers for 907A steel might be possible.

Go to article

Synthesis And Characterization Of Lini0.8-XAlXCo0.2O2 As Cathodes For Lithium-Ion Batteries, Jun Zhang, Zhong-Kao Jin, Qing-He Yang, Qing-Mei Song, Xiao-Hua Ma, Xiang-Fu Zong Aug 2002

Synthesis And Characterization Of Lini0.8-XAlXCo0.2O2 As Cathodes For Lithium-Ion Batteries, Jun Zhang, Zhong-Kao Jin, Qing-He Yang, Qing-Mei Song, Xiao-Hua Ma, Xiang-Fu Zong

Journal of Electrochemistry

Single-phase solid solution of LiNi0.8-xAlxCo0.2O2 (0≤ x <0.1)had been synthesized and characterized by X-ray diffraction(XRD) and scanning electron microscopy (SEM). Their electrochemical performance was examined by charge-discharge cycling. The LiNi0.71Al0.09Co0.2O2 compound showed a discharge capacity of 152 mAh/g after 20 cycles that corresponds to 97.4% capacity retention. The beneficial effect of co-doping with Al and Co elements was corro-borated by slow scanning cyclic voltammograms(SSCV), electrochemical impedance spectrum (EIS) and differential scanning calorimetry (DSC) data on charged cathodes. These results show that the 2D-character of the crystal lattice was stabilized by co-doping with Al and Co, the phase transitions that occur during deintercalation or intercalation of Li-ions were significantly suppressed, …

Go to article

Diffusion Of Hydrogen At Iron Apply For Electrochemical Oscillating Permeation, Li Zhang, Ren-He Yin, Zhan-Mei Sun Aug 2002

Diffusion Of Hydrogen At Iron Apply For Electrochemical Oscillating Permeation, Li Zhang, Ren-He Yin, Zhan-Mei Sun

Journal of Electrochemistry

The diffusion of hydrogen in iron was measured using electrochemical oscillating permeation. Through the samples in the different frequencies, it was found that diffusion of hydrogen at iron is of linear relation with boundary condition, which is the key to Fick's diffusion equation amplitude in the liquor. We can exploit this line relation getting the diffusion of hydrogen at iron.

Go to article

Research Progress On Electrode Material In All-Vanadium Redox Battery, Hua Li, Shou-Wen Chang, Chuan-Wei Yan Aug 2002

Research Progress On Electrode Material In All-Vanadium Redox Battery, Hua Li, Shou-Wen Chang, Chuan-Wei Yan

Journal of Electrochemistry

An all-vanadium redox flow storage battery possesses many advantages over conventional storage batteries.The development statue of two types electrode materials (metal and compound type) is introduced in this article.

Go to article

Initial Stages Of Copper Electrodeposition On Glassy Carbon Electrode, Ling Huang, Rui Zhang, Min Gu, Fang-Zu Yang, Shu-Kai Xu, Shao-Min Zhou Aug 2002

Initial Stages Of Copper Electrodeposition On Glassy Carbon Electrode, Ling Huang, Rui Zhang, Min Gu, Fang-Zu Yang, Shu-Kai Xu, Shao-Min Zhou

Journal of Electrochemistry

Initial stages of copper electrodeposition on glassy carbon electrode from acid sulphate solutions were studied using cyclic voltammetry and chronoamperometry. The electrolyte solution was a 0.05 mol.L-1 copper sulphate, 1.4～1.8 mol⋅L-1 sulphuric acid containing 1 mg·L-1 2-mercaptobenzoimidazole, Results show that 2-mercaptobenzoimidazole produced an inhibition of the copper deposition, probably related to the adsorption,sulphuric acid promote copper electrodeposition. The initial deposition kinetics corresponded to a model including instantaneous nucleation and diffusion controlled growth.Addition of 2-mercaptobenzoimidazole and sulphuric acid did not change the initial nucleation of copper electrocrystallization, it increased the nucleation rate and the number density of nuclei …

Go to article

The Performance And Heat Balance Of The Mcfc Stack With The Power Of 200 W, Hua-Xin Lin, Li Zhou, Bao-Lian Yi, Hua-Ming Zhang, Chang-Qin He Aug 2002

The Performance And Heat Balance Of The Mcfc Stack With The Power Of 200 W, Hua-Xin Lin, Li Zhou, Bao-Lian Yi, Hua-Ming Zhang, Chang-Qin He

Journal of Electrochemistry

The output power of the MCFC stack was 217.6 W under reaction gas pressure, 0.9 MPa/cm2 and utilization of oxidant and fuel gas, 20%. By calculation it was demonstrated that the heat balance state in the stack was kept at 300 mA/cm2 under the utilization of fuel gas and oxidant,20%. The current density in heat balance state was higher than 100 mA/cm2 under the utilization of air+CO2 mixture gas as oxidant and H2+CO2 mixture gas as fuel gas,40% and 60% respectively. If the utilization was increased in the stack, the current density in …

Go to article

Xrd Study On Highly Preferred Orientation Cu Electrodeposit, Min Gu, Fang-Zu Yang, Ling Huang, Shi-Bing Yao, Shao-Min Zhou Aug 2002

Xrd Study On Highly Preferred Orientation Cu Electrodeposit, Min Gu, Fang-Zu Yang, Ling Huang, Shi-Bing Yao, Shao-Min Zhou

Journal of Electrochemistry

Copper electrodeposit was obtained in CuSO4+H2SO4 electrolyte solution by electrodeposition and its structure was studied by XRD. The results showed that copper electoddeposits with the highly preferred orientations of (220) and (111) could be obtained at current density 4.0 A/dm2 and 15.0 A/dm2, respectively. The texture coefficient (TC) values were increased by thickness of Cu deposits. The thickness would be, to obtain Cu electrodeposit with (111) highly preferred orientation, about 7 times of that of (220) highly preferred orientation, which indicated that(220) face was easier to be remained than (111) face and …

Go to article

Ionic Conduction In Ba0.95Ce0.9Y0.1O3 - Α Solid Oxide And Its Performance In Fuel Cell, Gui-Lin Ma, Ding-Xian Jia, Li-Gan Qiu, Hui Shi, Rong Chen Aug 2002

Ionic Conduction In Ba0.95Ce0.9Y0.1O3 - Α Solid Oxide And Its Performance In Fuel Cell, Gui-Lin Ma, Ding-Xian Jia, Li-Gan Qiu, Hui Shi, Rong Chen

Journal of Electrochemistry

Using Ba0.95Ce0.9Y0.1O3-α as a solid electrolyte and porous platinum as electrodes,hydrogen and oxygen concentration cells and hydrogen-air fuel cell were constructed, respectively. Electromotive forces (MEFs) of the gas concentration cells and I-V characteristics of the fuel cell were detdrmined in the temperature range of 600～1 000 ℃. The Ba0.95Ce0.9Y0.1O3-α exhibited almost the pure protonic conduction under hydrogen gas,and a mixed conduction of oxide-ion and electron hole with oxide-ion transport number of 0.3～0.5 under oxygen gas. It exhibited a mixed conduction of proton and oxide-ion with the …

Go to article

Modification Of Molybdenum Nitride Electrode For Supercapacitor(I)——The Effect Of Ammonium Vanadate On The Properties Of Molybdenum Nitride Electrode, Xue-Liang Li, Dao-Rong Luo, Hua-Lin Wang, Jian-Bo He, Yun-Guei Zhu Aug 2002

Modification Of Molybdenum Nitride Electrode For Supercapacitor(I)——The Effect Of Ammonium Vanadate On The Properties Of Molybdenum Nitride Electrode, Xue-Liang Li, Dao-Rong Luo, Hua-Lin Wang, Jian-Bo He, Yun-Guei Zhu

Journal of Electrochemistry

The effect of vanadium on the properties of the electrode of molybdenum nitride has been studied by using XRD, SEM and cyclic voltammetry. Modified molybdenum nitride was made as follow: films were coated by dipping titanium sheet in the solution containing different composition of molybdenum oxide, ammonium vanadate, ammonia, glycol and oxalic acid, and coated films are reacted with free ammonia. The results show that the specific capacitance of modified electrode was considerably increased and the operation voltage was broadened with the addition of ammonium vanadate in the dipping solution. The mechanism of these effects generated is the formation of …

Go to article

In-Situ X-Ray-Absorption Spectroscopy Study Of Hydrogen Absorption By Nickel-Magnesium Thin Films, B. Farangis, Ponnusamy Nachimuthu, T. J. Richardson, J. L. Slack, Rupert C. Perera, Eric M. Gullikson, Dennis W. Lindle, M. Rubin Jul 2002

In-Situ X-Ray-Absorption Spectroscopy Study Of Hydrogen Absorption By Nickel-Magnesium Thin Films, B. Farangis, Ponnusamy Nachimuthu, T. J. Richardson, J. L. Slack, Rupert C. Perera, Eric M. Gullikson, Dennis W. Lindle, M. Rubin

Chemistry and Biochemistry Faculty Research

Structural and electronic properties of co-sputtered Ni-Mg thin films with varying Ni to Mg ratio were studied by in-situ x-ray absorption spectroscopy in the Ni L-edge and Mg K-edge regions. Co-deposition of the metals led to increased disorder and decreased coordination around Ni and Mg compared to pure metal films. Exposure of the metallic films to hydrogen resulted in formation of hydrides and increased disorder. The presence of hydrogen as a near neighbor around Mg caused a drastic reduction in the intensities of multiple scattering resonances at higher energies. The optical switching behavior and changes in the x-ray spectra varied …

Go to article

Non-Dipolar Electron Angular Distributions From Fixed-In-Space Molecules, Renaud Guillemin, Oliver Hemmers, Dennis W. Lindle, E. Shigemasa, K. Le Guen, D. Ceolin, C. Miron, N. Leclercq, P. Morin, Marc Simon, P. W. Langhoff Jul 2002

Non-Dipolar Electron Angular Distributions From Fixed-In-Space Molecules, Renaud Guillemin, Oliver Hemmers, Dennis W. Lindle, E. Shigemasa, K. Le Guen, D. Ceolin, C. Miron, N. Leclercq, P. Morin, Marc Simon, P. W. Langhoff

Environmental Studies Faculty Publications

The first indication of nondipole effects in the azimuthal dependence of photoelectron angular distributions emitted from fixed-in-space molecules is demonstrated in N2. Comparison of the results with angular distributions observed for randomly oriented molecules and theoretical derivations for the nondipole correction first order in photon momentum suggests that higher orders will be needed to describe distributions measured in the molecular frame.

Go to article

Evaluation Of Fluorapatite As A Waste-Form Material, Dennis W. Lindle, Dale L. Perry Jun 2002

Evaluation Of Fluorapatite As A Waste-Form Material, Dennis W. Lindle, Dale L. Perry

Separations Campaign (TRP)

Fluorapatite, fluorinated calcium phosphate, has been identified as a potential matrix for the entombment of the zirconium fluoride fission product waste stream from the proposed FLEX process. If the efficacy of fluorapatite based waste-storage can be demonstrated, then new and potentially more-efficient options for handling and separating high-level wastes, based on fluoride-salt extraction, will become feasible. This proposal will develop a dual-path research project to develop a process to fabricate a synthetic fluorapatite waste form for the ZrF4, FP waste stream, characterize the waste form, examine its performance under environmental conditions, and correlate the behavior of the waste …

Go to article

Immobilization Of Fission Iodine By Reaction With A Fullerene Containing Carbon Compound And Insoluble Natural Organic Matrix, Spencer M. Steinberg Jun 2002

Immobilization Of Fission Iodine By Reaction With A Fullerene Containing Carbon Compound And Insoluble Natural Organic Matrix, Spencer M. Steinberg

Separations Campaign (TRP)

The recovery of iodine released during the processing of used nuclear fuel poses a significant challenge to the transmutation of radioactive iodine. This proposal will develop and examine the use of Fullerene Containing Carbon (FCC) compounds as potential sorbents for iodine release from the reprocessing of nuclear fuel. This work will also include the development of bench-scale testing capabilities at UNLV to allow the testing of the FCC material in a simulated process off-gas environment. This experimental capability will also be used to test other potential sorbtion materials and processes, such as natural organic matter (NOM) and other promising alternatives. …

Go to article

Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin May 2002

Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin

Journal of Electrochemistry

A novel nanomaterial, zinc oxide (ZnO) and polyaniline (PANI) coaxial nanowires and their array in the template, was synthesized using anodic aluminum oxide (AAO) membrane as template. The morphology of these coaxial nanowires was observed with transmission electron microscope (TEM). The experiments on photoluminescence (PL) of coaxial nanowires and their array in AAO membrane show that the visible emission band of ZnO shifts from 530 nm to 400 nm and the luminescence is enhanced for the coaxial nanowires array in AAO membrane,and the visible emission band shifts to a lower wavelergth (385 nm) for coatial nanowires in NaOH solution. Possible …

Go to article

Electrochemical Properties Of Mixed Metal Oxide Coated Titanium Anodes In Seawater, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen May 2002

Electrochemical Properties Of Mixed Metal Oxide Coated Titanium Anodes In Seawater, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Mixed metal oxide coated titanium anodes prepared by thermal decomposition were characterized by scanning electron microscopy and electrochemical measurement, while the consumption rate of an anode was also measured in seawater. In order to examine the practical performances of mixed metal oxide-coated anodes, a simulating test on floating dock in seawater has also been carried out. The SEM results indicate that oxide layers exhibited a cracked-mud morphology which endows the anode with good electrocatalytic activity. The electrochemical measurements showed that mixed metal oxide-coated anodes exhibit excellent electrochemical activity and electrochemical stability in seawater. Owing to good corrosion resistance and low …

Go to article

The Electrochemical Etching Of Metals, Li-Min Jiang, Zhong-Qun Tian, Zhu-Fang Liu, Bin-Wei Mao, Hai-Gou Huang, Jian-Jun Sun May 2002

The Electrochemical Etching Of Metals, Li-Min Jiang, Zhong-Qun Tian, Zhu-Fang Liu, Bin-Wei Mao, Hai-Gou Huang, Jian-Jun Sun

Journal of Electrochemistry

All kinds of current methods for etching metals are reviewed. The electrochemical etching methods among them, including through-mask, scanning electrochemical microscopy, confined etchant layer technique, electrochemical scanning tunneling microscopy and super-short potential pulse, are discussed in detail. The compositive analyses were made for the methods in terms of the processing precision (whether processing in micrometer or nanometer scale), the processing efficiency (the complexity of the procedure, and whether fabricating in batch), the extent of application (mainly refer to the procedure, and whether fabricating in batch), the extent of results was shown that each method has itself advantage and imperfection. The …

Go to article

The Preparation And Characterization Of Growing Preferentially Cds Nanopartile Film, Huai-Guo Huang, Yan-Yan Xi, Zhi-Xin Zheng, Jia-Wei Yan, Jian-Zhang Zhou, Ling-Ling Wu, Zhong-Hua Lin May 2002

The Preparation And Characterization Of Growing Preferentially Cds Nanopartile Film, Huai-Guo Huang, Yan-Yan Xi, Zhi-Xin Zheng, Jia-Wei Yan, Jian-Zhang Zhou, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

CdS nanoparticle films were prepared on the PANI film, PATP film, Au film and ITO respectively by constant current deposition or current impulse method, and their structure and character were also studied. The results show that the substrates influence the structure and character of CdS particle film.

Go to article

An Investigation On Sr-Doped Spinel Phase-LisrXMn2-XO4, Hui Zhan, Yun-Hong Zhou May 2002

An Investigation On Sr-Doped Spinel Phase-LisrXMn2-XO4, Hui Zhan, Yun-Hong Zhou

Journal of Electrochemistry

Sr-doped spinel phase-LiSrxMn2-xO4 was successfully prepared by solid-state method. Structural and electrochemical characterizations were carried out. Although Sr2+ has a large ion radius-1.12 , the spinel structure can be well maintained for LiSrxMn2-xO4 sample as far as the x value doesn't surpass 0.05. Electrochemical study presents supporting evidence that doping the stoichiometric LiSrxMn2-xO4 phase with Sr is an effective way to improve the cycleability of LiSrxMn2-xO4 spinel material. A remarkable enhancement of the cycleability with retention of the initial …

Go to article

Polishing Rate And Dependent Factors Of Copper In Nh3 ·H2O Aqueous Solution Containing K3Fe(Cn)6 During Cmp, Han-Wei He, Yue-Hua Hu, Ke-Long Huang May 2002

Polishing Rate And Dependent Factors Of Copper In Nh3 ·H2O Aqueous Solution Containing K3Fe(Cn)6 During Cmp, Han-Wei He, Yue-Hua Hu, Ke-Long Huang

Journal of Electrochemistry

Dependence of polishing rates of copper on concentrations of NH3·H2O, passivator K3[Fe(CN)6], γ-Al2O3 abrasives and polishing pressures, polishing rotative rates were studied. Dependent mechanisms were explained. It was shown a linear relation between polishing and polishing pressures and rotative rates within some range, non-linear relation between polishing and various reagent concentrations. Preston coefficient was varied. CMP recipe of the best polishing rate was gained: 4%K3Fe(CN)6+1%NH3·H2O+25%γ-Al2O3, Kp=0.02383. Technics conditions were 300 rpm and 80 kpa. The …

Go to article

Electrosynthesis Of Glyoxylic Acid In A Cooled Cathode Reactor, Jin-Hong Fan, Jun Li, Xue-Yun Chen, Wei Li, Hao-Qi Gao May 2002

Electrosynthesis Of Glyoxylic Acid In A Cooled Cathode Reactor, Jin-Hong Fan, Jun Li, Xue-Yun Chen, Wei Li, Hao-Qi Gao

Journal of Electrochemistry

Glyoxylic acid was produced by electroreduction of oxalic acid in a well designed cooled cathode reactor. The cathodic and anodic electrolytes were super-saturated oxalic acid and hydrochloric acid aqueous solutions separated by a super-acid ion-exchange membrane. The current efficiency and time-space yield of glyoxylic acid were studied under different temperatures of cathode and electrolyte, current densities, materials of cathode. With the cooled cathode reactor, the energy consumption was reduced and higher oxalic acid concentration was available in solution, so that current efficiency was improved. The results indicated that the average time-space yield of glyoxylic acid was about 0.032 kg·dm-3 …

Go to article

Corrosive Electrochemical Behavior Of Carbon Steel In Microbiological Medium, Jing Liu, Hong-Bo Fan, Hai-Ping Xu, Jia-Shen Zheng, Li-Ming Xu, Zong-Qiang Mao May 2002

Corrosive Electrochemical Behavior Of Carbon Steel In Microbiological Medium, Jing Liu, Hong-Bo Fan, Hai-Ping Xu, Jia-Shen Zheng, Li-Ming Xu, Zong-Qiang Mao

Journal of Electrochemistry

Sulfate-reducing bacteria (SRB)grows and propagates, PH of the solution is dropped from 7.5 to 5.8, and forms the biofilms on carbon steel in culture medium. The micro-environment on the surface of carbon steel is changed under the biofilms, the factors accelerate the formation of the pitting corrosion. When the biofilm on carbon steel is cleaned out, the surface of carbon steel have the non-uniform pitting corrosion. The activity of SRB and the porous structure of biofilms induced the initiation and development of the pitting corrosion of carbon steel. The process of microbiologically induced corrosion (MIC) involves the development of SRB …

Go to article

Electrocatalytic Oxidation Of Formaldehyde On The Proline Film Modified Electrode, Yu-Rong Ma, Qiu-Xia Yang, Guo-Bao Li, Zheng-Kai Xi, Xue-Lin Wang May 2002

Electrocatalytic Oxidation Of Formaldehyde On The Proline Film Modified Electrode, Yu-Rong Ma, Qiu-Xia Yang, Guo-Bao Li, Zheng-Kai Xi, Xue-Lin Wang

Journal of Electrochemistry

The proline film modified electrode and its electrochemical behavior was studied by cyclic voltammetry and spectroelectrochemistry. After incorporation of Ni(Ⅱ), the cyclic voltammograms of the proline Ni(Ⅱ) film electrode exhibited a typical redox peak, which appeared at potential of 0.52 V anodic and 0.44 V cathodic in NaOH. The formal potentials E' were linearly dependent on the pH, and the peak currents ip were linearly dependent on the square root of the scan rates, thus charge transfer in the film was controlled by diffusion. The diffusion coefficient is figured out to be 2×10-10 cm2·s-1. The …

Go to article

Effect Of Precondition On Porous Silicon Formation, Xuan Cheng, Guang-Feng Luo May 2002

Effect Of Precondition On Porous Silicon Formation, Xuan Cheng, Guang-Feng Luo

Journal of Electrochemistry

In this work, effect of precondition on porous silicon formation was investigated by performing electrochemical polarization measurements. The surface morphologies and optical properties of the samples were also studied by scanning electron microscopy (SEM) and Raman spectrometer. It was demonstrated that precondition enhanced the chemical/electrochemical reactions occurred at Si/solution interface and the growth of porous silicon, which ultimately resulted in a red shift in photoluminescence. However, the thickness of porous silicon decreased with the increase of precondition time. More broad bands were observed with prolonged precondition.

Go to article

Preparation,Structure And Properties Of Electrochromic Rhodium Oxide Films, Hai-Hong Wang, Tao Wang, Man-Ming Yan, Zhi-Yu Jiang May 2002

Preparation,Structure And Properties Of Electrochromic Rhodium Oxide Films, Hai-Hong Wang, Tao Wang, Man-Ming Yan, Zhi-Yu Jiang

Journal of Electrochemistry

Electrochromic rhodium oxide films were prepared on ITO substrate by sol-gel method. The films exhibited reversible two-color (bright yellow at reduction and dark green at oxidation) electrochromic behavior in alkaline solution with good cycle stability. In-situ XRD, TGA-DTA, IR, XPS methods were used for studying the structure and chemical process of the films. The diffusion coefficient during the electrochromic process was measured by electrochemical impedance spectra method. It was found that the rhodium oxide films may be suitable for the use in electrochromic devices.

Go to article

Recent Developments In The Electrolyte For Lic6/Electrolyte/Cathode Battery, Cui-Ying Wang, Sheng-Liang Zhao, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin May 2002

Recent Developments In The Electrolyte For Lic6/Electrolyte/Cathode Battery, Cui-Ying Wang, Sheng-Liang Zhao, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

We present a reviewed the development and status of electrolyte for LiC 6/electrolyte/cathode battery. The effect of the salt, solvent, additive and impurity on the conductivity of the electrolyte, formation of the solid-electrolyte-interphase (SEI) and cycle life of the battery were described.

Go to article

Application Of Electrochemical Techniques To The Researches In Life Science, Jian-Tao Pang, Chun-Hai Fan, Gen-Xi Li May 2002

Application Of Electrochemical Techniques To The Researches In Life Science, Jian-Tao Pang, Chun-Hai Fan, Gen-Xi Li

Journal of Electrochemistry

The research work of our group in the last two years is briefly reviewed in this paper. By using electrochemical method, and combining some other chemical and biological techniques, lots of achievements have been obtained. And these researches are towards some hot topics in life science, such as function conversion, interaction between signal molecules and proteins, electron-transfer of biomolecules, gene detection, structural biology, biochemical analysis and the third generation biosensors.

Go to article

A Blend Conducting Membranes For Direct Methanol Fuel Cells, Lei Li, Jun Zhang, Hong Wu, Yu-Xin Wang May 2002

A Blend Conducting Membranes For Direct Methanol Fuel Cells, Lei Li, Jun Zhang, Hong Wu, Yu-Xin Wang

Journal of Electrochemistry

An attempt was made to modify membranes for direct methanol fuel cells by blending Nafion or polystyrene sulfonic acid (PSSA) with polyvinylidene fluoride (PVDF) from their solutions. The proton conductivity and methanol barrier property as a function of the membrane compositions are discussed. Compared with the Nafion 117 membrane, the PVDF-Nafion blend membranes with 25 wt% of Nafion showed a decrease in the conductivity by about 2 orders of magnitude, and the methanol barrier properties increased about 3 orders of magnitude. If the ratio (σ/P) is adopted to characterize the performance of the membrane, the PVDF-PSSA and PVDF-Nafiion blend membranes …

Go to article

Development Of 200～500 W Portable Proton Exchange Membrane Fuel Cell Power System, Li-Qing Hu, Li-Rong Zhou, Zheng Li, Jian-Wei Xia, Ming-Zhu Fu, Xin Wu, Yun Zhu May 2002

Development Of 200～500 W Portable Proton Exchange Membrane Fuel Cell Power System, Li-Qing Hu, Li-Rong Zhou, Zheng Li, Jian-Wei Xia, Ming-Zhu Fu, Xin Wu, Yun Zhu

Journal of Electrochemistry

The Properties of the Portable PEM Fuel Cell Power Source are very unique compared with the common primary or rechargeable electro-chemical battery. This paper describes the In this work, of the 200～500 W portable PEM fuel cell power system, was developed. The system mainly composed of four subsystem: 1)Fuel cell stack; 2)Air delivery; 3)Hydrogen source; 4)Heat dissipation and system control.

Go to article

Studies On Sulfate Reducing Bacteria Influenced Corrosion Of 90/10 Cu/Ni Alloy, Guang-Zhou Liu, Jian-Hua Qian, Yan Ma, Jian-Hua Wu May 2002

Studies On Sulfate Reducing Bacteria Influenced Corrosion Of 90/10 Cu/Ni Alloy, Guang-Zhou Liu, Jian-Hua Qian, Yan Ma, Jian-Hua Wu

Journal of Electrochemistry

Electrochemical techniques such as measurements of corrosion potential,the polarization resistance, and potentiodynamic scanning technique were used to investigate the electrochemical behavior of 90/10 Cu/Ni alloy in Postgate C medium containing sulfate reducing bacteria(SRB). The results showed that the corrosion potential of the alloy changed from -0.20 to -0.75 V(SCE) when bacteria inocula was added, and the polarization resistance Rp decreased obviously, which corresponds to an increased corrosion rate. The shape ofthe anodic polarization curves was drastically changed in the presence of SRB, and an active-passive transition was observed. Electron probe microanalyzer was used to investigate the morphology and chemical …

Go to article

First Prev Next Last