Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- Cyclic voltammetry (82)
- Electrocatalysis (81)
- Electrochemistry (70)
- Electrodeposition (66)
- Lithium ion battery (65)
-
- Oxygen reduction reaction (65)
- Supercapacitor (48)
- Corrosion (43)
- Electrochemical performance (42)
- Cathode material (41)
- Lithium-ion battery (36)
- Lithium-ion batteries (35)
- Electrochemical impedance spectroscopy (34)
- Fuel cell (33)
- Lithium ion batteries (29)
- Modified electrode (28)
- Carbon nanotubes (24)
- EIS (24)
- Anode (23)
- Cathode (22)
- Electrolyte (22)
- Oxygen evolution reaction (22)
- Polyaniline (22)
- Fuel cells (21)
- Anode material (20)
- Anode materials (20)
- Electrochemical behavior (20)
- Li-ion battery (20)
- Cathode materials (19)
- Electrocatalyst (19)
- Publication Year
Articles 1981 - 2010 of 2389
Full-Text Articles in Physical Chemistry
The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou
The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou
Journal of Electrochemistry
The cyclic voltammograms for Pb - 0.5 at% Ca - 1.5 at% Sn and Pb - 0.5 at% Ca - 1.5 at% Sn containing a certain amount of cerium in 4.5 mol·dm-3 H2SO4 at 20℃ were measured between 0.6 V and 1.4 V(vs. Hg/Hg2SO4). The growth rate of the anodic Pb(Ⅱ) films formed on the mentioned alloy electrodes at 0.9 V in the same sulfuric acid medium was investigated using the Linear Sweep Voltammetry. The variation with electrode potential of the real part of the impedence (Z’) for the anodic Pb(Ⅱ) films …
The Lineal Polarization Method For Corrosion Rate Measurement Of Reinforcing Bar Of Concrete In Situ, Ai-Ling Du, Wen-Tao Hou, He-Ming Zhang, Jian-Qun Luo
The Lineal Polarization Method For Corrosion Rate Measurement Of Reinforcing Bar Of Concrete In Situ, Ai-Ling Du, Wen-Tao Hou, He-Ming Zhang, Jian-Qun Luo
Journal of Electrochemistry
A linear polarization method was applied to measure corrosion rate of reinforcing bar of concrete in situ. Generally in the experiment, the area and shape of the reinforcing bar as a working electrode can be changed and adjusted according to our needs. But polarization area cannot be defined when reinforcing bar is polarized in situ, so that a real Rp can't be obtained. Thus the purpose of present work is to improve the measurement system. We used the double-ring auxiliary electrodes made by ourselves. The size of the double-ring auxiliary electrodes was adjusted repeatedly until the real polarization area …
The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu
The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu
Journal of Electrochemistry
The coherent electroplates were prepared by electro depositing Pd on supporting materials glassy carbon. The surface morphology of the electrodes was examined by SEM. The electro oxidation of HCOOH in HClO4 solution was investigated by using cyclic voltammetry. The results show that the deposited conditions in the preparation of electrodes by electro depositing Pd affect the electrodes electro catalytic activity to the oxidation of HCOOH. The platinized Pd electrode on GC substrates using large current density is of higher catalytic activity to the oxidation of HCOOH than Pd electrode. The electro catalytic activity of PdO formed on the Pd …
Electrochemical Characteristics Of Sb Irreversibly Adsorbed On Pt(100), Pt(110), Pt(111) And Pt(320) Electrodes, Yi-Yun Yang, Zhi-You Zhou, Qi-Hui Wu, Shi-Gang Sun
Electrochemical Characteristics Of Sb Irreversibly Adsorbed On Pt(100), Pt(110), Pt(111) And Pt(320) Electrodes, Yi-Yun Yang, Zhi-You Zhou, Qi-Hui Wu, Shi-Gang Sun
Journal of Electrochemistry
The electrochemical behaviors of irreversibly adsorbed antimony on Pt(100), Pt(110), Pt(111) and Pt(320) were studied by using cyclic voltammetry. The results revealeds that the Sb adatoms are stable on Pt(100), Pt(110), Pt(111) and on Pt(320) when electrode potentials are below 0.45 V(SCE) and 0.40 V, respectively. It was demonstrated that various coverages of Sb ad can be conveniently obtained by controlling the number of potential cycling and varying the upper limit of potential scan. The electrochemical behaviors of irreversibly adsorbed antimony varied with the surface atomic arrangement of Pt single crystal electrodes. Based on quantitative results of the relationship between …
A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber
A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber
Journal of Electrochemistry
The bistable characteristics of the process of active passive transition of iron in sulfuric acid was described and the stochastic resonance phenomenon in the process was simulated.
Mechanisimic Study Of Fes Electrode Process, Cong-Sheng Guan, Shu-Zhen Duan
Mechanisimic Study Of Fes Electrode Process, Cong-Sheng Guan, Shu-Zhen Duan
Journal of Electrochemistry
The mechanism of FeS electrode process has been investigated by using linear cyclic voltammetry. The electrode porcess of FeS is accompanied with the formation and dissolution of insoluble FeS and controlled by ohmic resistance. The peak currents and potentials on the cyclic voltammograms are dependent lineally on the square root of the scan rates. According to this, an ohmic resistance controlling model of FeS electrode has been put forward, and the relative functions between peak currents or potentials and scan rates have been deduced. The theoretical deduction is corresponding to the results of the experiments.
Electrochemical Evaluation On The Porosity Of Electroless Ni-P Alloy Coatings, Hong-Ying Yu, Dong-Bai Sun, Jing-Bing Huang, De-Jun Yang
Electrochemical Evaluation On The Porosity Of Electroless Ni-P Alloy Coatings, Hong-Ying Yu, Dong-Bai Sun, Jing-Bing Huang, De-Jun Yang
Journal of Electrochemistry
By investigating the polarization curves of pure Ni-P alloy, Ni-P alloy coation and carbon steel in nitric acids with different concentrations, the sutable concentration of nitric acid for the evaluation of the porosity of Ni-P alloy coatings has been determined and the coatings with different thickness have been evaluated. The results indicated that the nitric acid with 10 wt% concentration is the most suitable solution for the porosity of the coating by using electrochemical method. The polarization curve of Ni-P alloy coating in 10% nitric acid can accurately reveal the porosity. With the decrease of the porosity of the coating, …
The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan
The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan
Journal of Electrochemistry
Solid oxide fuel cells with supported yttria stabilized zirconia electrolyte films on anode substrates of various thickness have been fabricated. The electrochemical performances of the SOFCs have been examined. The results showed that the cell performance was limited by the anodic overpotential, which is caused mainly by a concentration polarization when the anode substrate is thick. The anodic overpotential was reduced obviously as the thickness of anode substrate was decreased. As a result, the performance of the SOFC cell was improved. With a 0.5 mm anode substrate, a SOFC cell produced a power density about 0.19 W/cm2 at 800 …
A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu
A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu
Journal of Electrochemistry
Research and development on low platinum loading electrode is very important in reducing the cost of proton exchange membrane fuel cell(PEMFC) stack. This paper has put forward a new method to prepare the electrode of PEMFC. The pore forming substances were used in this methd. The low platinum loading electrodes (0.02 mgPt⋅cm-2) have already been prepared with the method. Compared with the traditional method, the new method is simple, cheep, and easy to scale up. The superior composition of the electrodes is catalyst: pore forming substance: Nafion= 3:3:1. The performance of a single cell using this …
Three-Dimensional Microfabrication On Gaas Using A Regular Patterns Mold, Hai-Gou Huang, Jian-Jun Sun, Xiong-Ying Ye, Li-Min Jiang, Jin Luo, Ze-Sheng Lu, Shen Dong, Zhong-Qun Tian, Zhao-Ying Zhou, Zhao-Wu Tian
Three-Dimensional Microfabrication On Gaas Using A Regular Patterns Mold, Hai-Gou Huang, Jian-Jun Sun, Xiong-Ying Ye, Li-Min Jiang, Jin Luo, Ze-Sheng Lu, Shen Dong, Zhong-Qun Tian, Zhao-Ying Zhou, Zhao-Wu Tian
Journal of Electrochemistry
Electrochemical etching of single crystal GaAs (111) was performed with a regular mold which resembles the micro-gear patterns. The etched patterns on GaAs was very consistent with the negative copies of the mold when the confined etchant layer technique (CELT) was used. However when the scavenger chemical of H3AsO3 was not added in the etching solution, the regular micro-gear patterns of the mold could not be obtained. In addition, the procedure of fabricating a electrochemical mold is introduced and the characteristics of the mold are briefly discussed.
The Electrochemical Polymerization Of Erythrosin And The Fluorescence Spectra Of Polyerythrosin, Hong-Ping Zhu, Shao-Lin Mu
The Electrochemical Polymerization Of Erythrosin And The Fluorescence Spectra Of Polyerythrosin, Hong-Ping Zhu, Shao-Lin Mu
Journal of Electrochemistry
The solution used for the electrolysis consisted of 0.03 mol·dm-3 erythrosin, 0.05 mol·dm-3 sodium tetraborate and 0.5 mol·dm-3 KCl with pH 8.50. Polyerythrosin film with red color has been electrochemically synthesized using repeated potential cycling between -0.20 and 1.10 V (vs.SCE). The film growth and the electrochemical property of polyerythrosin are affected by electrolytic conditions. Two main absorption peaks of polyerythrosin at 326 nm and 370 nm appear in the UV-visible spectrum, which are different from that of the monomer. Polyerythrosin in dimethyl sulfoxide or dimethylformamide has a strong fluorescence intensity and the fluorescence intensity of polyerythrosin …
Cathodic Indirect Oxidation Of Organic Compounds(Ⅱ)——Cathodic Indirect Epoxidation Of Olefine, Xue-Ying Zhang, Bao-Qiu Cui, Deng-Ping Gu, Wei Li
Cathodic Indirect Oxidation Of Organic Compounds(Ⅱ)——Cathodic Indirect Epoxidation Of Olefine, Xue-Ying Zhang, Bao-Qiu Cui, Deng-Ping Gu, Wei Li
Journal of Electrochemistry
We described a novel cathodic indirect epoxidation system in which O2 was first cathodically reduced to H2O2. Then VO(acac)2 was oxidized by H2O2 homogeneously to VO(acac)2OOH which was used to epoxidize some olefine such as maleic, fumaric and crotonic acids. Many affecting factors on the current efficiency were optimized. The research will contribute to the developments of organic electrosynthesis.
Pulse Potential Modulated Electrochemical Gas Sensors, Zhong-Bai Zhou, Liang-Dong Feng, Wen-Jun Liu
Pulse Potential Modulated Electrochemical Gas Sensors, Zhong-Bai Zhou, Liang-Dong Feng, Wen-Jun Liu
Journal of Electrochemistry
The current popular electrochemical gas sensors are mostly stable with regard to their operating states. As a result, the further improvement of sensor charcateristics is restricted by such a "steady state". Based on the transient electrochemistry principle, a kind of all new transient electrochemical multi component gas sensors— "pulse potential modulated electrochemical gas sensors" was established by combining computer controlled fast modulated potential technique with microelectrode method.This novel approach provided a real time and dynamic sensor technique integrated with acquisition, treatment and display of signals for rapid simultaneous detecion of multicomponent gases, as illustrated by the case of monitoring of …
The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang
The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang
Journal of Electrochemistry
Lithiated titanium composite oxides Li4Ti5O12 were prepared from Li2CO3 and TiO2. The XRD results of this composite oxides indicated that the compound had a spinel structure. The electrochemical behavior of lithiated titanium composite oxides was examined. The results showed that this material had an excellent cyclic capability and reversibility for lithium insertion, and had high specific capacity: the initial discharge capacity was 300 mAh·g-1 , and the reversible capacity was 100 mAh·g-1 . The discharge plateau (about 1.5 V) and the charge plateau (about 1.6 V) were very …
Studies Of The LialYNi1-YO2 As Cathode Materials For Rechargeable Lithium Ion Batteries, Xiao-Gan Li, Wei-Hua Qiu, Chuan-Gang Lin, Qing-Guo Liu
Studies Of The LialYNi1-YO2 As Cathode Materials For Rechargeable Lithium Ion Batteries, Xiao-Gan Li, Wei-Hua Qiu, Chuan-Gang Lin, Qing-Guo Liu
Journal of Electrochemistry
In this paper, we have synthesized series of single-phase LiAlyNi1-yO2 (differentive in value-y) by solid reaction. Through examining their electrothemical properties, found that, under a proper sintering condition, LixAl0.25Ni0.75O2 solution for cathode materials of rechargeable lithium ion batteries showed more pleasing properties in overcharge-resist and cycling life (vs LiNiO2). When x>1, the capacity can be kept 125mAh/g after 30 cycles under higher charged/discharged voltages ranging from 3.0 V to 4.8 V, whereas that of pure LiNiO2 has only 61 nAh/g after 25 cycles. The …
Corrosion Behavior Of Reinforcing Steel In Concrete, Rong-Gui Du, Rong-Gang Hu, Zu-De Feng, Jiang-Guang Tan, Chang-Jian Lin
Corrosion Behavior Of Reinforcing Steel In Concrete, Rong-Gui Du, Rong-Gang Hu, Zu-De Feng, Jiang-Guang Tan, Chang-Jian Lin
Journal of Electrochemistry
The corrosion behavior of reinforcing steel in concrete in chloride free and chloride contaminated simulated concrete solutions was studied by electrochemical technique. The results showed that the reinforcing steel exhitibted different corrosion characteristics in the different solutons. In general, the steel in concrete was protected in the test solutions with no salt or the lower concentration of NaCl. When the concentration of NaCl is larger than 70%, however, the corrosion behavior of the steel varied considerably, and the corrosion rate increased as pH fell and the concentration of Cl- increased.
A Study On The Cylindrical Zinc-Air Battery, Sheng-Sian Li, Gui-Mao Zhou, Xin-Ping Ai, Han-Xi Yang
A Study On The Cylindrical Zinc-Air Battery, Sheng-Sian Li, Gui-Mao Zhou, Xin-Ping Ai, Han-Xi Yang
Journal of Electrochemistry
The zinc air battery has advantages of high specific energies and low cost, therefore attracts much interests. However, its application is limited only in prismatic and button type.This paper reported a novel design of cylindrical zinc air batteries and the performances of the batteries tested at various conditions. The results showed that when discharged at the current of 40 mA at 20 °C, the capacity of AA size and AAA size batteries reached 4000mAh and 1400mAh respectively, corresponding to the energy densities 280 Wh/kg and 200 Wh/kg. The effects of the discharge current, temperature and humidity on the performances of …
Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu
Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu
Journal of Electrochemistry
The cathode materials Li1+xMn2O4 were prepared with citric acid complexing and solution impregnating methods. Structure characterization and specific surface area test were performed by means of XRD, BET methods, the influences of calcination temperature, Li/Mn molar ratio and raw materials on the structure and electrochemical capacity of samples have beem examined. The results showed that the Li/Mn molar ratio and calcimation temperature were the key factors affecting the electrochemical capacity of cathode materias. The optimum conditions for synthesis of Li1+xMn2O4 cathode material were 0≤x≤0.05 and calcined at 750°C. The initial …
Electrocrystallization Mechanism And Grain Sizes Of Ni-W-B Alloy Eletrodeposits, Fang-Zu Yang, Gang-Min Cao, Xiao Hu, Shu-Kai Xu, Shao-Min Zhou
Electrocrystallization Mechanism And Grain Sizes Of Ni-W-B Alloy Eletrodeposits, Fang-Zu Yang, Gang-Min Cao, Xiao Hu, Shu-Kai Xu, Shao-Min Zhou
Journal of Electrochemistry
The electrodeposition characteristics and grain sizes of Ni-W-B alloy have been studied by cyclic voltammetry, potentiostatic step and X-ray diffraction (XRD). The results showed that Ni-W-B alloy electrodeposit obtained from the solution containing ammonium citrate as a complexing agent was presented in the lower electrochemical activity compared with Ni-W alloy. Based upon the i～t curves of potentiostatic step, it was revealed that electrocrystallization of Ni-W-B alloy on glassy carbon followed the mechanism of instantaneous nucleation and three dimensional growth with diffusion controlled. The crystal nucleus number on the surface of electrode was raised by the increase of overpotential. According to …
A Review On Impressed Current Anodes Of Cathodic Protection For Underground Structures, Li-Kun Xu, Ting-Yong Wang, Liang-Qian You, Rong-Chun Qian, Guang-Zhang Chen
A Review On Impressed Current Anodes Of Cathodic Protection For Underground Structures, Li-Kun Xu, Ting-Yong Wang, Liang-Qian You, Rong-Chun Qian, Guang-Zhang Chen
Journal of Electrochemistry
The requirements of impressed current anodes for the protection of underground structures were presented in this paper according to the analysis of working conditions. The characteristics and performance of various anodes such as scrap steel, graphite, high silicon cast iron, magnetite, platinized anode, conductive polymer cable anode and mixed metal oxide anode were reviewed. The development trend of impressed current anodes for underground applications was also discussed.
Electrochemical Codeposition Of Palladium And Glucose Oixdase In The Presence Of Glycine As Complexing Agent, Kan Zhu, Hui-Huang Wu
Electrochemical Codeposition Of Palladium And Glucose Oixdase In The Presence Of Glycine As Complexing Agent, Kan Zhu, Hui-Huang Wu
Journal of Electrochemistry
Glycine and Pd(NH3)2Cl2 consist of a solution for the electrochemical codeposition of Pd and glucose oxidase (GOD) to prepare a metallized enzyme electrode. The experiments by UV/V spectroscopy show that the complexing of Pd ion with glycine can occur, which makes the plating bath has relatively stable chemical composition in a certain pH range. The voltammetric experiments indicate that the presense of glycine decreases the potential of Pd deposition ,facilitating to prevent the formation of palladium hydride. The appropriate conditions for the electrochemical codeposition of Pd and GOD are discussed.
Study On The Effect Of Sodium Ion On Cycle Performance Of Lithium/Improved Graphite Lithium Ion Cell, Wen-Huang Huang, Yu-Shun Yan, Chun-Rong Wan, Chang-Yin Jiang
Study On The Effect Of Sodium Ion On Cycle Performance Of Lithium/Improved Graphite Lithium Ion Cell, Wen-Huang Huang, Yu-Shun Yan, Chun-Rong Wan, Chang-Yin Jiang
Journal of Electrochemistry
The different concentration of Na+ was introduced into the non-aqueous eletrolyte system EC/DEC/LiClO 4 with 4A molecular sieve and lithiated 4A molecular sieve, by which the trace amount of water was removed. The concentrations of Na+ and Li+ were determined by atomic adsorption spectrometry. The cycle performance of lithium/improved graphite cells was then examined by charging and discharging under the constant electric current. The results demonstrated that the cycle performance of the cells was destroyed by the high concentration of Na+ under the small electric current. With the increase of electric current the cell became less …
Effect Of N-Ion Implantation On The Anodic Polarization Behavior Of Surgery Medical Materials In Artificial Body Fluid, Liang Guo, Cheng-Hao Liang, Hong-Yan Sui
Effect Of N-Ion Implantation On The Anodic Polarization Behavior Of Surgery Medical Materials In Artificial Body Fluid, Liang Guo, Cheng-Hao Liang, Hong-Yan Sui
Journal of Electrochemistry
Effect of N-ion implantation on the anodic polarization behavior of surgery medical materials, such as SUS316L stainless steel, Co-Cr alloy and Ti6Al4V alloy, has been investigated with electrochemical technology in artificial body fluid Hank's solution. With the tests of corrosion potential and anodic polarization curves, it can be seen that the anti-corrosion behavior is developed after implantion. XRD and AES profiles have shown that the metal nitride coated on the matrix after N-ion implantation, which isolates the matrix from environmental solution. The metal nitride film with high electrochemical capability plays an important role in inhibiting corrosion …
Study Of The Cathod Of The Amperometric Glucose Sensor, Xiu-Juan Yu, Ding Zhou
Study Of The Cathod Of The Amperometric Glucose Sensor, Xiu-Juan Yu, Ding Zhou
Journal of Electrochemistry
The possibility for several kinds of conducting materials used as the cathode of glucose sensor was studied by the cathode polarization curves. It was shown that the titanium coated by RuO2/TiO2 is stable to the electrochemical corrosion and it could promote the generation of hydrogen. H2O2 could be detected in the electrochemical system constructed by the anode of graphite powder and epoxy resin composite and the cathode of titanium coated by RuO2/TiO2 in the potential range of 0.6V～0.8 V. It can be used as the cathode of glucose sensor instead of …
A Study For The Data Analysis Of Electrochemical Noise With Wavelet Analysis, Hong-Bo Ding, Bao-Yun Xia, Zhong-Xiao Pan, Chang-Jian Lin
A Study For The Data Analysis Of Electrochemical Noise With Wavelet Analysis, Hong-Bo Ding, Bao-Yun Xia, Zhong-Xiao Pan, Chang-Jian Lin
Journal of Electrochemistry
In the process of electrochemical dynamics system, the phenomenon of the random fluctuations of electrochemical parameters (electrode potential, cell current, etc.) is called “Electrochemical Noise”(ECN). Wavelets analysis is one new data analysis technique which has undergone a breakthrough in the area of mathematics and singnal processing in recent years. In this paper, the technique of continuous wavelet transform has been employed to investigate electrochemical noise data, and the chaotic nature of corrosion process has been manifested.
The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen
The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen
Journal of Electrochemistry
Our recent works about nanosized materials for lithium ion batteries are reported, including the synthesis of nanosized Sb, SnSb, CuSnx, Si and CuS, their electrochemical performance as anode or cathode active materials, the variation of crystal structure and morphology during discharge and charge cycling. In addition, the self-plasticization of lithium salt with nanosized anion ion in polymer electrolyte, the influence of the electrochemical Li-doping on the Raman spectra and photoluminescence of nano-Si are also introduced. Furthermore, the relationship between intrinsic properties of nanosized materials and their electrochemical behaviors are discussed. The prospect of nanosized materials for lithium ion …
Determination Of Kinetic Parameters Of Enzyme-Immunoelectrode For Sec Assay, Sa-Ying Dong, Xin-Miao Liu, Yuan-Zhi Wang, Guang-Zhang Chen, Ming-Xiang Lv, Bo-Yi Tian
Determination Of Kinetic Parameters Of Enzyme-Immunoelectrode For Sec Assay, Sa-Ying Dong, Xin-Miao Liu, Yuan-Zhi Wang, Guang-Zhang Chen, Ming-Xiang Lv, Bo-Yi Tian
Journal of Electrochemistry
Reaction mechanism of enzyme immunoelectrode is studied by potentiostatic. Rotating disk electrode is used to determine the controlling step of bioelectrode. Under different potentials and different modifying conditions, kinetic parameters of bioelectrodes were measured on the base of electrochemical impendance spectra. At the same time, these parameters are compared and discussed.
The Influence Of Surface Diffusion Of Adsorbed Intermediate On Hydrogen Evolution Reaction At Pt/Nafion Composite Electrodes, Wei-Yi Tu, Lei Su, Wen-Jun Liu, Bing-Liang Wu
The Influence Of Surface Diffusion Of Adsorbed Intermediate On Hydrogen Evolution Reaction At Pt/Nafion Composite Electrodes, Wei-Yi Tu, Lei Su, Wen-Jun Liu, Bing-Liang Wu
Journal of Electrochemistry
The decrease of over-potential of hydrogen evolution reaction at Pt black powder/Nafion microelectrode, comparing that of the Pt microdisk/Nafion electrode, was evident from the polarization curves of the Pt microdisk/Nafion electrode, platinized Pt micrdisk/Nafion electrode and Pt black powder/Nafion microelectrode. It is also evidenced by a plane Pt electrode with an additional free Pt surface. The surface diffusion and the surface recombination reaction of the adsorbed intermediate at the free surface of the Pt particles were supposed. It is an additional reaction path that induced the decrease of the concentration of the adsorbed intermediate. Thereby, the over-potential decreased.
Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan
Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan
Journal of Electrochemistry
The modified powder microelectrode was prepared by etching a Pt (0.1 mm diameter) disk microelectrode and filling in thus formed cavity with Nation-Os(bpy)32+/PVP composite modified carbon powder. The composite modified powder microelectrode showed cyclic voltammetric behaviors changing with the mole ratio (denoted X) of SO3- to Os(bpy)32+ in Nafion. When X=3, a single pair of current peaks appeared near 0.6V (vs. SCE) due to Os(bpy)32+/3+ redox couple. In contrast, for X=20, a pair of additional current peaks occurred near 0.4V. Both X=3 and X=20 modified powder microelectrodes strongly catalyzed the first …
Technical Investigaton Of Thin-Film Plasticizing Lithium Ion Battery, Xin-Ping Ai, Xin-Lin Hong, Quan-Feng Dong, Sheng-Xian Li, Han-Xi Yang
Technical Investigaton Of Thin-Film Plasticizing Lithium Ion Battery, Xin-Ping Ai, Xin-Lin Hong, Quan-Feng Dong, Sheng-Xian Li, Han-Xi Yang
Journal of Electrochemistry
A number of polymer materials as candidates of host matrix of plastic polymer electrolyte were examined and techniques for preparation of thin-film electrolyte were reported. The results showed that the polymer electrolyte prepared with P(VDF-HFP) copolymer as host matrix and DBP as plasticizer exhibit the satisfactory mechanical strength and ionic conductivity. In comprison with liquid electrolyte systems, thin-film lithium ion battery has almost similar charge-discharge capacity and cycleability. The manufacture methods and the technical factors in making plasticizing lithium ion battery were also described in details.