Physical Chemistry Commons^™

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang

Journal of Electrochemistry

A site deficient (La_0.8Sr_0.2)_0.95MnO₃ (LSM95) powder was synthesized by solid state reaction as a cathode material. The commercial Zr_0.9Sc_0.1SO_1.95 (SSZ) was selected as an electrolyte material and La_0.8Sr_0.2Cr_0.5Mn_0.5O₃- (LSCrM) was synthesized by sol-gel method as an anode material. Accordingly, single cells of LSCrM-CeO₂|SSZ|3YSZ-LSM95 were prepared by tape casting, sintering and impregnation. The single cell test results for LSCrM-CeO₂|SSZ|3YSZ-LSM95 with 0.11 g·cm ^-2 CeO₂ and using CH₄ as a fuel showed the power …

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan

Journal of Electrochemistry

Carbon is richly reserved in coal, biomasses, and many other nature resources. It is usually used as an energy source through oxygen oxidation reaction. The oxidation is generally realized through combustion which causes serious air pollution. Besides, the conversion efficiency of generating electricity through the combustion process is limited by Carnot efficiency. A direct carbon solid oxide fuel cell (DC-SOFC) is a solid oxide fuel cell (SOFC) directly operated with solid carbon as the fuel. It can convert the chemical energy of carbon into electricity with high efficiency. The concentration of produced CO₂ from a DC-SOFC is so high …

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie

Journal of Electrochemistry

Solid oxide electrolysers are now attracting much more attentions because they can efficiently produce fuels by electrolyzing H₂O/CO₂. In this paper, a comprehensive introduction to the recent progress in the development of fuel electrode (cathode) materials is provided. The advantages, disadvantages and development trend towards various cathode materials are pointed out. The key scientific and technological problems in this field are emphasized.

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu

Journal of Electrochemistry

Solid oxide electrolysis cell is an advanced energy conversion device with high efficiency, simplicity, flexibility, and environmental friendliness. It is currently a research hotspot in the international energy field. This paper introduces and analyzes the basic principles, key materials, system components and developments of solid oxidation electrolysis cells. Furthermore, the recent research progresses, challenges and future development directions in solid oxidation electrolysis cells in the field of high-efficiency hydrogen production are summarized and outlined.

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan

Journal of Electrochemistry

For pervasive applications of fuel cells, highly efficient and economical materials are required to replace Pt-based catalysts for oxygen reduction reaction (ORR). In this study, the NiO@rGO, Pd-NiO@rGO and Ag-NiO@rGO nanoparticles were synthesized, and their catalytic performances toward ORR were investigated. The results revealed that all the three materials were capable of catalyzing ORR, but both the Pd-NiO@rGO and Ag-NiO@rGO showed the better performances compared with the NiO@rGO in terms of the reaction pathway being 4-electron process, the increases of the onset potential and the intermediate yielding rate, as well as the extended stability. Moreover, the effect of Pd modification …

Construction And Electrochemical Performance Of Garnet-Type Solid Electrolyte/Al-Li Alloy Interface, Jia-Lin Ma, Hong-Chun Wang, Zheng-Liang Gong, Yong Yang

Journal of Electrochemistry

Garnet-type solid electrolyte is a newly developed Li ion conductor and promising in the application of all-solid-state batteries. However, Garnet is incompatible with Li anode, which restricts the application of Garnet-type solid batteries. In order to improve the contact between Garnet-type solid electrolyte and Li electrode, a composite anode which contains Al-Li alloy (Al₄Li₉) was prepared as an electrode. Al-Li alloy has many advantages such as easy preparation, low cost, simple post-treatment and high capacity. Garnet-type Li_6.5La₃Zr_1.75W_0.25O₁₂ (LLZWO) was synthesized via solid-state reaction. Garnet solid electrolyte has …

Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen

Journal of Electrochemistry

Positive material Li₂MnO₃ shows the highest ratio of lithium to manganese among lithium-rich materials and exhibites the theoretical capacity up to 458 mAh·g^-1, making it one of the most promising cathode materials. However, this material has the intrinsic low electrical conductivity and poor cycle stability. In this paper, Li₂MnO₃, the lithium-rich positive material, was prepared by sol-gel method using acetate as raw material and citric acid as a complexing agent. By using SnC₂O₄ as a tin source, Sn⁴⁺ instead of Mn⁴⁺ was introduced to obtain the …

Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li

Journal of Electrochemistry

The Ni-Fe/Ti oxygen evolution electrode was prepared by electrodeposition on a titanium mesh substrate. Then, the as prepared Ni-Fe/Ti electrode was used to derive the Ni-Fe-S/Ti hydrogen evolution electrode through solid phase sulfuration. The effects of the molar ratio of Ni²⁺ to Fe³⁺ in the electrolyte and the amount of thiourea on the structures and electrochemical performances of Ni-Fe/Ti and Ni-Fe-S/Ti electrodes were investigated. The results show that the oxygen evolution performance of Ni-Fe/Ti electrode was first increased and then decreased with the increase of nickel ion content in the electrolyte. The Ni9Fe1/Ti electrode exhibited the best oxygen …

Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun

Journal of Electrochemistry

The performance of catalysts highly depends on their surface structure and composition. Nanocrystals bounded by high-index facets usually exhibit high catalytic activity due to their high-density low-coordinated step atoms with high reactivity. In this paper, we have reviewed the preparations of noble metals (e.g., Pt, Pd and Rh) nanocatalysts with high-index facets by electrochemical square-wave potential method developed in our group. The square-wave potential method includes a nucleation procedure to generate nuclei, followed by a square-wave potential procedure for a certain period of time for the growth of nuclei into nanocrystals. The formation mechanism of high-index facets is also discussed. …

Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen

Journal of Electrochemistry

In this review, we present the major developments in the understanding of the mechanisms of the electrochemical reduction of CO₂ from a historical perspective. Most of the work discussed in this review was carried out at copper electrodes, as this is the only material at which hydrocarbons are produced in reasonable quantities. The emphasis focuses on the differentiation of mechanisms for the generation of C1 and C2 products as well as factors and methods for controlling the product selectivity of CO₂ reduction. We have highlighted ambiguities, assumptions, and important methodologies, such as differential electrochemical mass spectrometry and electrochemical …

Effect Of Nitrogen Content In Catalyst Precursor On Activity Of Fen/C Catalyst For Oxygen Reduction Reaction, Zhi Yang, Ya-Yun Shen, E Zhou, Cheng-Ling Wei, Hao-Li Qin, Juan Tian

Journal of Electrochemistry

Non-noble metal catalysts with high activity and low cost have attracted increasing interest as potential catalysts for oxygen reduction reaction (ORR) to replace Pt-based catalysts. In this paper, the effect of nitrogen content in catalyst precursor on ORR activity of FeN/C catalyst was investigated by X-ray diffraction (XRD), Brunauer-Emmet-Teller (BET) surface area and pore size distribution measurements, transmission electron microscope (TEM), thermogravimetric analysis (TGA), and rotating disk electrode (RDE) techniques. The results show that the most active catalyst was obtained by pyrolysis in argon at 1050 °C with a catalyst precursor containing 20wt% 1,10-phenanthroline, 1wt% Fe and Black Pearl 2000. …

Challenges In The Activity And Stability Of Pt-Based Catalysts Toward Orr, Tuo Zhao, Er-Gui Luo, Xian Wang, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The development of highly efficient oxygen reduction reaction (ORR) catalysts is the key to the commercialization of fuel cells, where the sluggish ORR reaction rate needs to be overcome by adjusting the intermediates adsorption energies on the catalytic surfaces. To-date, platinum (Pt)-based materials are the-state-of-the-art catalysts in terms of both activity and stability in ORR, making them the preferred choice for commercial applications. However, the high cost of Pt-based catalysts limits their widespread use, leading to massive effects paid in reducing Pt loading, improving catalyst activity and stability. This article illustrates the challenges in the ORR reaction and introduces the …

Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng

Journal of Electrochemistry

Proton exchange membrane (PEM) is one of the key components in PEM fuel cells, which possesses the function of separating the cathode and anode, affording proton transport channels and preventing fuel permeability. The property of PEM significantly influences the performance and service life of fuel cells. Nowadays, the commercially used Nafion membranes have the shortcomings of serious fuel permeability, low proton conductivity at elevated temperature and high price, which limits the rapid development of PEM fuel cells. Therefore, it seems to be urgent to develop novel PEMs with low cost and good comprehensive properties. Polymeric proton exchange membrane is an …

Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang

Journal of Electrochemistry

Carbon layers with different thicknesses were introduced into the surfaces of silicon (Si) nanoparticles by sol-gel method using poly (cyclotriphosphazene-co-4, 4'-sulfonyldiphenol) as the carbon source. Technologies of X-ray diffraction, thermo-gravimetric analysis, Brunauer-Emmett-Teller and transmission electron microscopy were employed to analyze the structures and components of the as-prepared Si@C_PZS composites. Electrochemical performance of Si@C_PZS with different carbon thicknesses was studied. The results showed that Si@C_PZS with carbon thickness of 10 nm possessed the best performance. Its capacity remained 940 mAh·g^-1 after 290 cycles under 500 mA·g^-1. As the addictive, the graphite-based anode contained 30% of …

Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen

Journal of Electrochemistry

In recent years, the rapid growing in the electric vehicle market has raised higher requirement on the lithium-ion batteries (LIBs) performance towards energy density and safety. However, considering the successful development of LIBs techniques in the past 30 years, there is little room left for improving the LIBs performance on the aspects related to the electrode materials, battery structure design and production processes. It is important to pursue more comprehensive fundamental understanding in the entire system and working principle of LIBs. Solid electrolyte interphase (SEI), existing between the electrode material and the electrolyte, has been proved to be an important …

Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

Nickel-rich ternary materials with large reversible capacity as well as high operating voltage are considered as the most promising candidate for next generation lithium-ion batteries (LIBs). However, the inferior cycle stability and thermal stability have limited their widely commercial applications. Concentration gradient design of Ni-Co-Mn/Al ternary concentration gradient materials have been extensively studied in the past decade, which can ensure high cycle capacity while maintaining excellent cycle stability. In this paper, the latest research progresses in Ni-Co-Mn/Al ternary concentration gradient materials for LIBs are reviewed. Firstly, we summarize the different synthesis methods of ternary concentration-gradient materials, especially focusing on the …

Preparation And Electrocatalytic Performance Of Nico2O4/Ni Foam For Hydrogen Peroxide Electrooxidation, Wei-Wei Chen, Fei-Fan Zhang, Jia-Liang Du, Yi Wang, Chun-Lin Zhao, Kai Zhu, Dian-Xue Cao, Gui-Ling Wang

Journal of Electrochemistry

The electrodes of Ni foam supported NiCo₂O₄ nanowires were prepared by hydrothermal method, followed by a thermal treatment in air, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that the NiCo₂O₄ nanowires had a diameter of about 50 nm with a length up to 3 ~ 5 μm. The catalytic performances of the Ni foam supported NiCo₂O₄ nanowires for H₂O₂ electrooxidation were studied by cyclic voltammetry and chronoamperometry. The results show that the Ni foam supported NiCo …

Carbon Oxidation At The Atomic Level: A Computational Study On Oxidative Graphene Etching And Pitting Of Graphitic Carbon Surfaces, Simon Schmitt

Theses and Dissertations--Mechanical and Aerospace Engineering

In order to understand the oxidation of solid carbon materials by oxygen-containing gases, carbon oxidation has to be studied on the atomic level where the surface reactions occur. Graphene and graphite are etched by oxygen to form characteristic pits that are scattered across the material surface, and pitting in turn leads to microstructural changes that determine the macroscopic oxidation behavior. While this is a well-documented phenomenon, it is heretofore poorly understood due to the notorious difficulty of experiments and a lack of comprehensive computational studies. The main objective of the present work is the development of a computational framework from …

Multi-Component Material For Solar Energy Conversion And Fundamentals Of Lead Acid Batteries, Crystal Ferels

Graduate Research Theses & Dissertations

Synthesis of complex inorganic materials is desirable because their complex composition allows more degrees of freedom and tunability, whose properties differ from their parent components. As an expansion on this concept, we synthesized a quinary compound Ce3FeWS3O6, using a molten flux method and a solvothermal method. The compound crystallizes into a hexagonal crystal system with space group P63/m. Its electric partition shows an anion with the form [(Ce3+)3W6+(S2-)3(O2-)6]3- forcing the transition metal Fe3+ state and leaving no conduction electrons, making the material a semiconductor. This compound is the right candidate as photoelectric material capable of absorbing photons from the solar …

Effects Of Hole Transporting Layers And Surface Ligands On Interface Energetics And Photovoltaic Performance Of Methylammonium Lead Iodide Perovskites, So Min Park

Theses and Dissertations--Chemical and Materials Engineering

Organic metal halide perovskites are promising materials for various optoelectronic device applications such as light emitting diodes (LED) and photovoltaic (PV) cells. Perovskite solar cells (PSCs) have shown dramatic increases in power conversion efficiency over the previous ten years, far exceeding the rate of improvement of all other PV technologies. PSCs have attracted significant attention due to their strong absorbance throughout the visible region, high charge carrier mobilities, color tunability, and ability to make ultralight weight devices. However, organic metal halide perovskites still face several challenges. For example, their environmental stability issue must be overcome to enable widespread commercialization. Meeting …

A Theoretical And Experimental Study Of Charge Transport In Organic Thermoelectric Materials And Charge Transfer States In Organic Photovoltaics, Ashkan Abtahi

Theses and Dissertations--Physics and Astronomy

Applications of organic electronics have increased significantly over the past two decades. Organic semiconductors (OSC) can be used in mechanically flexible devices with potentially lower cost of fabrication than their inorganic counterparts, yet in many cases organic semiconductor-based devices suffer from lower performance and stability. Investigating the doping mechanism, charge transport, and charge transfer in such materials will allow us to address the parameters that limit performance and potentially resolve them. In this dissertation, organic materials are used in three different device structures to investigate charge transport and charge transfer. Chemically doped π-conjugated polymers are promising materials to be used …

Structure, Morphology And Composition-Property Elucidation Of Ni–Mo And Ni−Mo−P Nanocrystals For Water Splitting Reactions And Group Iv Alloy And Silicate Nanocrystals For Visible To Near Ir Optoelectronics, Ebtesam Hassan Abuelenein Eladgham

Theses and Dissertations

Abstract

Structure, Morphology and Composition-Property Elucidation of Ni–Mo and Ni−Mo−P Nanocrystals for Water Splitting Reactions and Group IV Alloy and Silicate Nanocrystals for Visible to Near IR Optoelectronics

by

Ebtesam Hassan Abuelenein Eladgham

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Advisor: Indika U Arachchige

Associate Professor, Department of Chemistry

Nanomaterials have gained a great attention because of their unique physical properties with size intermediate between molecular materials and extended solids. They have a large surface to volume ratio and display size tunable physical properties that was not …

Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors, Yue-Shen Zhou, Meng Li, Shuang Wu, Zhao-Lei Li, Yan-Min Gao

Journal of Electrochemistry

In this work, hydrothermal reaction and high temperature were used to grow ZnCo₂O₄ active materials on Ni foam. The crystal stuctures and surface morphlogies of four samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The electrochemical performances were characterized by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) testing and electrochemical impedance spectroscopy (EIS) on an electrochemical station. It can be seen that active materials tended to form denser stuctures with an increasing amount of NH₄F in the solution system and four different morphologies of ZnCo_{2 …}

Electrochemical Determination Of Trace Copper Ions In Drinking Water Source, Jing-Ji Peng, Hong Zheng, Yi-Song Zou, Guo-Kun Liu, Dong-Xing Yuan

Journal of Electrochemistry

Aiming at the on-site and quick safety evaluation of the dissolved trace copper ions (Cu²⁺) in drinking water source, an electrochemical detection platform was developed on the basis of the square wave anodic stripping voltammetry using the gold nanoparticles (Au NPs) modified glassy carbon electrode, where Au NPs were deposited via electrochemical cyclic voltammetry. The proposed method displayed the limit of detection as low as 1.3 μg·L^-1 in the linear range of 2 ~ 50 μg·L^-1. The proposed method was applied to the determination of Cu²⁺ in the midstream of Minjiang River, one of …

Electrochemical Behaviors Of Azopurine On Gold Electrodes, Ming-Xue Li, Hang Shi, Jia Liu, Meng Zhang, Jian-Zhang Zhou, De-Yin Wu, Zhong-Qun Tian

Journal of Electrochemistry

In this paper, we studied the electrochemical behaviors of azopurine on polished gold electrodes with cyclic voltammetry (CV). On the basis of analyzing scan rate and peak current, it was supposed that the redox process belonged to a reversible process controlled by adsorption in 0.2 mol·L^-1 PBS (pH = 4.0 ~ 10.0) solutions. The potentials of redox peaks moved more negatively with increasing pH value. This proved that the H⁺ proton has participcted in the electrochemical reaction. The further data analysis and the calculation of surface adsorption excess demonstrated that the reaction was a two-proton and two-electron process. …

Electrochemical Cycling Stability Of Polyaniline Films In Different Color Ranges, Kun Xu, Kai-Ling Zhou, Hao Wang, Jing-Bing Liu, Hui Yan

Journal of Electrochemistry

The electrochromic behaviors of polyaniline films were investigated by potential step and cyclic voltammetry coupled with UV viscosity photometer. The polyaniline films show colorful changes from pale yellow to green and then to blue. Electrochromic stability, electrochemical behavior, coloring performance, optical properties and surface formations of the produced films were studied in detail. The working electrode was the flexible PANI electrode, and the counter electrode and the reference electrode were a platinum sheet and Ag/AgCl, respectively. The in situ optical transmittance of the PANI film at 650 nm was measured using an ultraviolet-visible-near-infrared spectrophotometer (Shimadzu UV-3101PC) combining with a square …

Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode, Zhang-Feng Li, Xiao-Rui Wang, Wen-Sheng Tian, Jin-Ze Yang, Ping Zhang, Li-Ping Ma, Yang Chen, Xiao-Li Cui, Zhi-Yu Jiang

Journal of Electrochemistry

An advance method for preparing polyaniline-coated hollow sulfur material using sublimate material ADD(2,4,6-tri(propan-2-yl)-1,3,5-trioxane) as a template was developed for lithium-sulfur battery. At first, the smashed ADD particles were coated by a sulfur layer through the reaction of Na₂S₂O₃ with diluted HCl. Then polyaniline layer was coated again on the surface of sulfur layer through the reaction of aniline with (NH₄)₂S₂O₈. After being dried at 60 ^oC for 12 h, the ADD in such a composite evaporated totally, and resulted in the formation of polyaniline-coated hollow sulfur …

Study On Electro-Sorption Of Heavy Metals And Sulfamethoxazole On Activated Carbon Fibers, Wen-Jun Zhao, Bing-Xin Jia, Ya-Nan Zhang, Jiu-Nian Guan, Jiao Qu, Ying Lu

Journal of Electrochemistry

To study the optimal removal condition, adsorption mechanism and comparative analysis of the three typical cationic pollutants, i.e., Zn(II), anionic pollutant Cr(VI) and molecular pollutant sulfamethoxazole (SMX), using self-made upflowed electro-sorption device for adsorptions of above three pollutants by modified activated carbon fiber were researched. The activated carbon fiber (ACF) was modified by hydrochloric acid. The ACF morphology and structure before and after modification were characterized by SEM, BET and FTIR. The characterization results show that the modified ACF had fewer surface impurities than the modified surface and the gully is more obvious, the specific surface area was increased by …

Bipolar-Membrane Electrodialysis Method To Treat Industrial High Saline Perfume Wastewater, Jian Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Large amount of organic saline wastewater is generated from various chemical industries. The contents of organic saline wastewater are more and more complicated as they are created from different types of industries. Directly discharging the organic saline wastewater without pre-treatment can generate severe environmental problem and waste useful resources. It is necessary to use an economical method to treat the organic saline wastewater and recover the salt into useful materials to achieve resource reuse. Bipolar-membrane electrodialysis (BMED) is one of the methods that can remove salt from the wastewater and convert it into certain acid and base with higher value …

Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong

Journal of Electrochemistry

P-nitrothiophenol (PNTP) is one of the most common probe molecules studied by surface-enhanced Raman spectroscopy (SERS). The research in electrochemical reduction behavior of PNTP will help understanding the mechanism for the nitrobenzene reduction. In this paper, we used transient electrochemical surface-enhanced Raman spectroscopy (TEC-SERS) to study the SERS of PNTP with cyclic voltammetry and chronoamperometry on gold electrodes. The results show that the TEC-SERS provide a time resolution that equals the transient electrochemical methods, and we concluded that the reaction was so quick that we did not observe the spectral information of intermediate species described in the literatures with a …