Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 901 - 930 of 2388

Full-Text Articles in Physical Chemistry

Progress Of Self-Supported Supercapacitor Electrode Materials Based On Carbon Substrates, Shui-Jian He, Wei Chen Dec 2015

Progress Of Self-Supported Supercapacitor Electrode Materials Based On Carbon Substrates, Shui-Jian He, Wei Chen

Journal of Electrochemistry

Self-supported electrode materials have been widely used in supercapacitors. Carbon materials are promising substrates in building self-supported electrode materials attributed to their diverse structures, rich resource, relatively low cost and high stability. Combined with our own research in this field, we summarize here the recent progress on the synthesis of self-supported electrode materials and their supercapacitance properties. The overall synthetic strategy could be divided into two categories: “top-down” and “bottom-up”. We hope this review is helpful for the development and application of renewable sources in self-supported electrode materials.

Go to article

Synthesis Of Porous Carbon Nanosheets And Its Application In Sodium-Ion Battery, Jing-Fei Zhang, Jing Lu, Xiao-Yu Yang, Yun-Di Huang, Lin Xu, Dong-Mei Sun, Ya-Wen Tang Dec 2015

Synthesis Of Porous Carbon Nanosheets And Its Application In Sodium-Ion Battery, Jing-Fei Zhang, Jing Lu, Xiao-Yu Yang, Yun-Di Huang, Lin Xu, Dong-Mei Sun, Ya-Wen Tang

Journal of Electrochemistry

Owning to sodium’s high abundance, relatively low cost, similar chemical properties to Li and very suitable redox potential of E0(Na+/Na) = -2.71 V versus SHE which is only 0.3 V above that of lithium, rechargeable sodium ion battery hold much promise as potential alternatives to current lithium ion batteries for energy storage applications. Carbon material is regarded as the most promising anode candidate for sodium ion battery. Particularly, carbon nanosheet with porous structure and high conductivity is expected to have improved sodium ion storage properties. In this paper, we present a two-step pyrolysis-based method for facile …

Go to article

Carbon Aerogel/Nickel Foam As Electrode For High-Performance Supercapacitor, Zhong Wu, Xin-Bo Zhang Dec 2015

Carbon Aerogel/Nickel Foam As Electrode For High-Performance Supercapacitor, Zhong Wu, Xin-Bo Zhang

Journal of Electrochemistry

Herein, a facile synthesis has been explored to prepare carbon aerogel/Ni foam. Graphene oxide, resorcinol and formaldehyde serve as precursors and polymerize in-situ on the Ni foam after hydrothermal synthesis at 85 ℃. After lyophilization treatment, the carbon aerogel/Ni foam with porous structure can be obtained. Electrochemical investigations reveal that the carbon aerogel/Ni foam exhibits superior performances in both aqueous and organic electrolytes involving high specific capacitance and long-term cycling stability. The excellent properties can be ascribed to the unique formation and porous structure, which allows more effective transportations of electron and electrolyte ion.

Go to article

Intercalation Of Clo4- Into Hopg Investigated By Ec-Stm, Xiao-Yan Hu, Alice Aliwowe, Jia-Wei Yan, Bing-Wei Mao Dec 2015

Intercalation Of Clo4- Into Hopg Investigated By Ec-Stm, Xiao-Yan Hu, Alice Aliwowe, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

The electrochemical intercalation and surface morphology of highly oriented pyrolytic graphite (HOPG) electrode in 2 mol⋅L-1 HClO4 were studied by in situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV). Based on the step-height changes observed before and after the intercalation, the effects of different step sites on intercalation are compared. The feasibility, reversibility and speed of intercalation are discussed. The intercalation ofClO4- into HOPG can be divided into three types depending on the number of graphite layers at the step site: When the layers of graphite are more than three, the intercalation becomes feasible; when …

Go to article

Effect Of Mno2 Content On Electrochemical Capacitance Behavior Of Active Carbon Electrode, Kun Shen, Xian-Liang Zhou, Qi-Shun Duan Dec 2015

Effect Of Mno2 Content On Electrochemical Capacitance Behavior Of Active Carbon Electrode, Kun Shen, Xian-Liang Zhou, Qi-Shun Duan

Journal of Electrochemistry

In this work, the manganese dioxide (MnO2) materials were prepared by solution approach at low temperature, thermal decomposition and electrochemical deposition. The actived carbon (AC) and MnO2composite electrodes were used for aqueous supercapacitors. The morphologies and structures of the prepared materials were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), and the electrochemical behaviors were tested by cyclic voltammetry (CV) and galanostatic charge-discharge tests. Electrochemical test data show that the maximum specific capacitances of 151, 172 and 141 F•g-1were obtained with the contents of MnO2being 70, 60 and 70% in …

Go to article

Fast And Accurate Evaluation Of Lifepo4 Cathode Materials By Single Particle Microelectrode, Fu-Qing Wang, Yi-Min Wei, Yu-Zhuan Su, Bing-Wei Mao, Kai Wu, Feng-Gang Zhao, Chun-Lei Chen, Xing-Lu Li, Jin Chong Dec 2015

Fast And Accurate Evaluation Of Lifepo4 Cathode Materials By Single Particle Microelectrode, Fu-Qing Wang, Yi-Min Wei, Yu-Zhuan Su, Bing-Wei Mao, Kai Wu, Feng-Gang Zhao, Chun-Lei Chen, Xing-Lu Li, Jin Chong

Journal of Electrochemistry

Single particle microelectrode enables to evaluate the electrochemical responses for single particle of active material without binder and conductive agent. Thus, the influences of additive and electrode structure on the electrochemical performance of active materials can be ignored. Furthermore, this technology can be used to evaluate active materials fast. Therefore, single particle microelectrode allows fast and accurate determination of the intrinsic performance of active material. Cyclic voltammogram (CV), cycle performance, and kinetic behavior of LiFePO4 cathode materials were evaluated by the single particle microelectrode. CV curve of LiFePO4 particle with a pair of oxidation and reduction peaks was …

Go to article

Hybrid Sol–Gel Glasses With Glass-Transition Temperatures Below Room Temperature, Andrei Jitianu, Guadalupe Gonzalez, Lisa C. Klein Dec 2015

Hybrid Sol–Gel Glasses With Glass-Transition Temperatures Below Room Temperature, Andrei Jitianu, Guadalupe Gonzalez, Lisa C. Klein

Publications and Research

Melting gels are hybrid gels that have the ability to soften and flow at around 100 ° C for some combinations of mono- and di-substituted alkoxysiloxanes, where substitutions are either all aromatic or all aliphatic. In this study, melting gels were prepared using phenyltriethoxysilane (PhTES) and dimethyldiethoxysilane (DMDES), meaning both an aromatic and aliphatic substitution. Differential scanning calorimetry was performed to identify glass-transition temperatures, and thermal gravimetric analysis coupled with differential thermal analysis (TGA-DTA) was performed to measure weight loss. The glass-transition temperatures ( T g ) ranged from – 61 ° C to + 5.6 ° C, which are …

Go to article

From Dye Sensitized Solar Cells To Organic Field Effect Transistors: A Computational Investigation Into The Structural And Electronic Properties Of Novel Phthalocyanines, Patrick J. Dwyer Dec 2015

From Dye Sensitized Solar Cells To Organic Field Effect Transistors: A Computational Investigation Into The Structural And Electronic Properties Of Novel Phthalocyanines, Patrick J. Dwyer

Seton Hall University Dissertations and Theses (ETDs)

Phthalocyanines (Pc) have gained intense research attention in many diverse application areas due to their highly tunable electronic and structural properties through modification of the molecular periphery and metal center. Throughout this work a series of novel perfluoro-isopropyl substituted MPc have been investigated through theoretical methods. First, the synthetic mechanisms of these Pcs will be explored to gain insight into the experimentally observed Pc product distribution. By examining the electronic structure and formation energies of the various Pc precursors, we explain the product distribution as well as propose the formation of additional Pcs, which were not currently believed to form. …

Go to article

Hydrogen Bond-Mediated Structural Order In Hydroxylated Bis-Mpa Dendritic Polymers: Experimental And Molecular Dynamics Simulation Study, Maliha N. Syed Dec 2015

Hydrogen Bond-Mediated Structural Order In Hydroxylated Bis-Mpa Dendritic Polymers: Experimental And Molecular Dynamics Simulation Study, Maliha N. Syed

Dissertations

Dendritic architectures are echoed throughout nature. While the significance of these pervasive patterns is not entirely clear, connections between their structures and physical properties are fascinating to contemplate. Particular interest has been paid to a family of synthetically manufactured and commercially available dendritic polymers based on 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) as a monomer. Composed of two hydroxyls and a carboxyl group, bis-MPA based structures hydrogen bond (H-bond) profusely. Given the high concentration and unique spatial orientation of end-groups, as well as the multitude of carbonyl, ester, and ether interior H-bond acceptors, a set of distinct H-bond organizations may be observed …

Go to article

Influence Of Shelling Temperature And Time On The Optical And Structural Properties Of Cuins2/Zns Quantum Dots, Colette Robinson Dec 2015

Influence Of Shelling Temperature And Time On The Optical And Structural Properties Of Cuins2/Zns Quantum Dots, Colette Robinson

Graduate Theses and Dissertations

CIS/ZnS core/shell QDs are an important class of nanomaterials for optoelectronic, photovoltaic and photoluminescence applications. They consist of lower toxicity materials than the prototypical II-VI Cd-based QDs and show long fluorescence lifetimes, which generates prospective in biological imaging applications. It is vital to develop reproducible synthetic methods for this new class of nanomaterials in order to maintain small sizes with high QYs. CIS core QDs have been shelled with ZnS at various temperatures from 90-210°C for reaction times ranging from 20-140 minutes to examine the role of thermodynamics and kinetics on the shell growth. Using HR-TEM and ICP-MS, it was …

Go to article

Sulfonated-Graphene/Nafion Composite Membrane For All Vanadium Redox Flow Batteries, Da-Wei Yang, Yan-Qing Dong, Jing-Min Fan, Ming-Sen Zheng, Quan-Feng Dong Oct 2015

Sulfonated-Graphene/Nafion Composite Membrane For All Vanadium Redox Flow Batteries, Da-Wei Yang, Yan-Qing Dong, Jing-Min Fan, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

Nafion membrane has been widely used in fuel cells due to its good proton conductivity, chemical and mechanical stabilities. However, the well-developed water channels in Nafion membrane have restricted its application in all vanadium redox flow batteries owing to the high permeation of vanadium ions and the cost. In this work, the water adsorption rate, resistivity and transference number of vanadium ions of sulfonated-graphene/Nafion composite membrane were investigated and compared with those of Nafion membrane in an effort to overcome the abovementioned drawbacks. It was found that the area resistivity and permeation rate of sulfonated-graphene/Nafion composite membrane were significantly reduced …

Go to article

Application Of Pd/Graphene Modified Electrode In The Detection Of 4-Chlorophenol, Peng Shi, Bo-Xuan Wang, Quan-Lin Song, Hui Wang, Xin Liu, Zhao-Yong Bian Oct 2015

Application Of Pd/Graphene Modified Electrode In The Detection Of 4-Chlorophenol, Peng Shi, Bo-Xuan Wang, Quan-Lin Song, Hui Wang, Xin Liu, Zhao-Yong Bian

Journal of Electrochemistry

The Pd/graphene composites were synthesized by a modified Hummers method and NaBH4 reduction process, and then were characterized using XRD, SEM, XPS, and TEM. The Pd/graphene modified glassy carbon electrode (Pd/graphene/GCE) was prepared based on this method. Cyclic voltammetry was used to study the optimum operation conditions for the 4-chlorophenol detection. It was shown that the surface of the graphene was smooth and Pd nanoparticles were uniformly dispersed on graphene. The average particle size was calculated to be 6.5 ± 0.05 nm. These nanoparticles exhibited high catalytic activity and sensitivity toward chlorophenols. PBS with a concentration of 0.1 mol·L-1 …

Go to article

Latest Progresses In Vanadium Flow Battery Technologies And Applications, Xiao-Li Wang, Yu Zhang, Hua-Min Zhang Oct 2015

Latest Progresses In Vanadium Flow Battery Technologies And Applications, Xiao-Li Wang, Yu Zhang, Hua-Min Zhang

Journal of Electrochemistry

With virtues of high safety, long cycle life, friend environment and state of charge easy monitoring, vanadium flow battery has become an effective technique for large scale energy storage. United States, Japan, Europe and other developed countries are actively promoting the developments of vanadium flow battery technology and related equipments. In this paper, the performance of containerized vanadium flow battery, which was newly developed by Rongke Power (RKP) and Dalian Institute of Chemical Physics, was introduced. The operation data of 5 MW/10 MWh vanadium flow battery energy storage station was displayed. Finally, it is pointed out that reducing the cost, …

Go to article

Short Review On Electrochemical Energy Storage, Hong Li, Ying-Chun Lyu Oct 2015

Short Review On Electrochemical Energy Storage, Hong Li, Ying-Chun Lyu

Journal of Electrochemistry

Energy storage is a critical supporting technology in many fields such as energy, information, transportation, and healthcare, aerospace, advanced manufacture, advanced equipment, national security. Electrochemical energy storage technique has been widely applied and is developing continuously. In this article, the energy storage mechanism, technical indicators and technology ready level in electrochemical energy storage are summarized. Mainly based on lithium ion batteries, untraditional electrochemical issues in electrochemical energy storage devices are described from the perspective of fundamental science. These issues deal mainly with thermodynamics, kinetics, size effect, asymmetric system, asymmetric reaction path, surface phenomenon, hybrid ion transportation, and solid state battery. …

Go to article

Research Progress Of Secondary Sodium-Air Batteries, San-Pei Zhang, Zhao-Yin Wen, Jun Jin, Xiang-Wei Wu, Ying-Ying Hu, Mei-Fen Wu Oct 2015

Research Progress Of Secondary Sodium-Air Batteries, San-Pei Zhang, Zhao-Yin Wen, Jun Jin, Xiang-Wei Wu, Ying-Ying Hu, Mei-Fen Wu

Journal of Electrochemistry

Rechargeable sodium-air batteries have been the focus in the fields of batteries and energy storage recently, owing to their high specific energy density (1600 Wh·kg-1), an equilibrium discharge potential of 2.3 V and earth-abundant sodium element However, research on sodium-air cells is still in an infant age and presents many scientific issues. Based on recently reported work and our own experience on sodium-based batteries, this review summarizes the research progress related to the critical scientific is sues of secondary sodium-air batteries and the application prospect of sodium-air battery.

Go to article

Preparations And Properties Of Polybenzimidazole/Polyvinylbenzyl Crosslinked Composite Membranes For High Temperature Proton Exchange Membrane Fuel Cells, Jin-Kai Hao, Yong-Yi Jiang, Zhen Wang, Xiao-Jin Li, Zhi-Gang Shao, Bao-Lian Yi Oct 2015

Preparations And Properties Of Polybenzimidazole/Polyvinylbenzyl Crosslinked Composite Membranes For High Temperature Proton Exchange Membrane Fuel Cells, Jin-Kai Hao, Yong-Yi Jiang, Zhen Wang, Xiao-Jin Li, Zhi-Gang Shao, Bao-Lian Yi

Journal of Electrochemistry

In order to increase the chemical stability of polybenzimidazole (PBl) membrane, a highly stable polymer, poly vinyl. benzyl chloride (PVBC), was chosen as the macromolecular crosslinker, and 1H-1,2,4-triazol was adopted to prepare the crosslinked PBI-based membranes. The influence of the PVBC amount on membrane characteristic was investigated in detail. The results indi. cated that the crosslinked structure of the membrane effectively improved the chemical stability, and at the same time, the mem. brane presented good mechanical property and proton conductivity. The fuel cell performance for the membrane was tested with hy. drogen and oxygen single cell without humidification at 150 …

Go to article

Development Of Proton Conduction Membranes In Application Of Vanadium Flow Battery, Le-Tu Qingge, Wei-Nan Guo, Ping Liu, Bao-Guo Wang Oct 2015

Development Of Proton Conduction Membranes In Application Of Vanadium Flow Battery, Le-Tu Qingge, Wei-Nan Guo, Ping Liu, Bao-Guo Wang

Journal of Electrochemistry

The polymeric hydrophilic/hydrophobic interactions into membrane formation were introduced. A general and straightforward strategy for preparing membranes with nanometer-scale pores was suggested by utilization of hydrophilic/hydrophobic interactions to generate phase separation and removal of polyion aggregates through water immersion. Poly(vinylidene fluoride) (PVDF) and sodium allyl sulfonate (SAS) serve as the membrane material and pore-generator, respectively, resulting in chemically stable and oxidation-resistant membranes with various potential applications. Following the same procedure invented to produce the laboratory-scale membranes, the scale-up process to manufacture large-area membranes was completed. The obtained membrane exhibited the conductivity of 3.5×10-2 S•cm-1, thickness of 100 …

Go to article

Review For Applications Of "Lead Carbon" Batteries In Energy Storage System, Yong-Quan Ma, Ke Ke, Da-Ming Gu Oct 2015

Review For Applications Of "Lead Carbon" Batteries In Energy Storage System, Yong-Quan Ma, Ke Ke, Da-Ming Gu

Journal of Electrochemistry

Three types of “lead carbon” batteries are introduced by comparing their advantages and disadvantages. Then their applications in energy storage system (ESS), especially in the field of renewable energy power generation, are discussed. The prospects and potential applications of “lead carbon” batteries in EES for electric power supply system are analyzed by combining the state-of-the-art techniques in this field.

Go to article

Characterization Of The Separator With Thermal-Shutdown Layer For Use In Lithium Batteries, Li Bai, Yong-Jian Huai, Xin-Ping Ai, Hai Jia Oct 2015

Characterization Of The Separator With Thermal-Shutdown Layer For Use In Lithium Batteries, Li Bai, Yong-Jian Huai, Xin-Ping Ai, Hai Jia

Journal of Electrochemistry

In this paper, the lithium ion battery coated with the thermal-shutdown functional layer has been introduced. The shutdown temperature of the separator could be decreased by using the melting point of thermal-shutdown functional layer. When the internal battery environment reached a critical temperature, the functional layer melted and coated the anode/separator with a non-conductive barrier, halting Li-ion transport and shutting down the cell permanently. The results showed that the functional layer did not affect the resistance, rate performance and cycle life. It was found the functional layer can significantly improve the safety of the battery when misused.

Go to article

Impact Of Water Content On The Performance Of Lifepo4 Based Lithium-Ion Battery, Jun-Ting Niu, Lin Sun, Shu-Wen Kang, Zhen-Wei Zhao, Zi-Feng Ma Oct 2015

Impact Of Water Content On The Performance Of Lifepo4 Based Lithium-Ion Battery, Jun-Ting Niu, Lin Sun, Shu-Wen Kang, Zhen-Wei Zhao, Zi-Feng Ma

Journal of Electrochemistry

Through different dry conditions and measuring by moisture test instrument, cathode pole pieces with different water contents of 0.3‰ ~ 0.7‰ were obtained to prepare lithium-ion batteries. Cycling performance and high rate performance at 1C ~ 5C discharge rates were tested. Moreover, ASR performances of LiFePO4 base lithium-ion batteries after 200 cycles with different water contents were investigated by EIS. The results showed that the cycle performance and rate performance were closely related to the water content of the electrode. When the water content went up to 0.6‰ the cycle stability and rate performance fell. Meanwhile, the internal resistance and …

Go to article

Effects Of Microstructures Of Active Material On Performance Of Vrla Battery, Lei Jiang, Shou-Zhong Yi Oct 2015

Effects Of Microstructures Of Active Material On Performance Of Vrla Battery, Lei Jiang, Shou-Zhong Yi

Journal of Electrochemistry

The structure, morphology and content of the as-prepared and the processed samples were characterized by the means of SEM and XRD. The discharge capacities and cycle life performances of the as-prepared and the processed samples were tested by electrochemical measurements with different rates. The results indicated that the 4BS technology which can affect the plate design, deep cycle capability and cycle life is a basic technology for the VRLA batteries. It was also confirmed that the contents and structures of α-PbO2 and β-PbO2 formed with different processing conditions can affect the performance of the VRLA batteries, suggesting that …

Go to article

Preparation And Performance Of Lithium-Rich Manganese Layered Materialsâ 0.6li[Li1/3Mn2/3]O2·0.4liniXMnYCo1-X-YO2(X < 0.6, Y > 0), Hai-Lan Feng, Ya-Fei Liu, Yan-Bin Chen Oct 2015

Preparation And Performance Of Lithium-Rich Manganese Layered Materialsâ 0.6li[Li1/3Mn2/3]O2·0.4liniXMnYCo1-X-YO2(X < 0.6, Y > 0), Hai-Lan Feng, Ya-Fei Liu, Yan-Bin Chen

Journal of Electrochemistry

Lithium-rich manganese based cathode materials 0.6Li[Li1/3Mn2/3]O2⋅0.4LiNixMnyCo1-x-yO2 (x < 0.6, y > 0) were synthesized by carbonate co-precipitation and high temperature solid-state reaction. The structures and morphologies of the as-prepared materials were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM). The results of high temperature in-situ XRD test show that the lattice parameters change significantly with increasing temperature and Ni content. The cation mixing gets serious and the spinel phase appears in the high Ni content samples when the temperature is up to 800 oC. Under voltages ranging from 2.0 to …

Go to article

Synthesis, Structure And Electrochemical Performance Of Na2Mnsio4/C Cathode Material For Na-Ion Batteries, Shou-Ding Li, Jiang-Huai Guo, Yong Xie, Jin-Xiao Mi, Yong Yang Aug 2015

Synthesis, Structure And Electrochemical Performance Of Na2Mnsio4/C Cathode Material For Na-Ion Batteries, Shou-Ding Li, Jiang-Huai Guo, Yong Xie, Jin-Xiao Mi, Yong Yang

Journal of Electrochemistry

As a promising cathode material for sodium ion batteries, pure phase Na2MnSiO4/C nanocomposite was successfully synthesized by a sol-gel method with a citric acid as a complex agent. The as prepared material was characterized by XRD, FTIR, SEM and TEM techniques. XRD and Rietveld refinement results indicated that the sample was indexed as monoclinic structure with space group of Pn. It was observed by SEM and TEM that the obtained product consisted of micro-scaled secondary particles, which were composed of NaMnSiO4 nanocrystallites and amorphous carbon network. More importantly, the uniform carbon network in the …

Go to article

Preparation And Characterization Of Carbon Supported Pd-Sb Composite Nanocatalysts For Formic Acid Electrooxidation, Long-Long Wang, Xiao-Lu Cao, Ya-Jun Wang, Jin-Hao Ping, Qiao-Xia Li Aug 2015

Preparation And Characterization Of Carbon Supported Pd-Sb Composite Nanocatalysts For Formic Acid Electrooxidation, Long-Long Wang, Xiao-Lu Cao, Ya-Jun Wang, Jin-Hao Ping, Qiao-Xia Li

Journal of Electrochemistry

Palladium is considered as an efficient anode catalyst with high catalytic activity for electrooxidation of formic acid. To further improve the catalytic activity and stability, alloying or surface modification with Sb is an effective way. In this work, the well dispersed carbon supported Pd-Sb composite nanocatalysts (Pd-Sb/C) were synthesized by traditional impregnation reduction method with trisodium citrate as the complexing agent, sodium borohydride as the reducing agent. The morphologies of Pd-Sb/C and the effects of molar ratio of Pd to Sb on the electrocatalytic properties of Pd-Sb/C for HCOOH electrooxidation were studied. The XRD and XPS analyses on the as-prepared …

Go to article

Preparation And Enhanced Rate Capability Of Spinel Limn1.9Al0.1O3.95F0.05, Jun-Yan Hu, Meng-Meng Wang, Hong-Tao Liu Aug 2015

Preparation And Enhanced Rate Capability Of Spinel Limn1.9Al0.1O3.95F0.05, Jun-Yan Hu, Meng-Meng Wang, Hong-Tao Liu

Journal of Electrochemistry

Spinel LiMn1.9Al0.1O3.95F0.05 cathode materials with good crystallinity were synthesized by a sol-gel process followed with a high-temperature solid reaction. The effects of partial substitution of Al for Mn, and F for O on the structure and the electrochemical performance were investigated. The results showed that LiMn1.9Al0.1O3.95F0.05 exhibited the same crystalline state as LiMn2O4, but much better electrochemical stability at higher rate cycling. As a result, LiMn1.9Al0.1O3.95F0.05 could maintain stable electrochemical lithium storage even suffering from …

Go to article

Sodium Difluoro(Oxalato)Borate As An Electrolyte Additive To Improve The Electrochemical Performance Of Graphite Anode, Yang-Yang Yao, Dong-Dong Liu, Li Wang, Xiang-Ming He, Jian-Jun Li, Ding Zhang Aug 2015

Sodium Difluoro(Oxalato)Borate As An Electrolyte Additive To Improve The Electrochemical Performance Of Graphite Anode, Yang-Yang Yao, Dong-Dong Liu, Li Wang, Xiang-Ming He, Jian-Jun Li, Ding Zhang

Journal of Electrochemistry

The fast development in applications of Li-ion batteries (LiBs) in daily life urges for better electrochemical performance of LiBs, which can be promoted by adding appropriate electrolyte additives. This work studied the effect of NaDFOB as the additive on a common electrolyte formula (1 mol·L-1 LiPF6 in EC+DMC+EMC, 1:1:1 by volume). Analysis methods such as CV, EIS and SEM were adopted to study electrochemical performance of experimental battery and interface profiles. It was revealed that the reversible charge-discharge capacity and cycling performance of graphite anode had been dramatically improved. In addition, the cycling performance of graphite anode at …

Go to article

An Investigation On Electrochemical Performance Of Supercapacitor Electrode Materials Prepared By Mno2 With Four Different Crystal Forms, Zhen-Kun Wei, Xiao-Zhen Hua, Ke Xiao, Xian-Liang Zhou, Zhi-Guo Ye Aug 2015

An Investigation On Electrochemical Performance Of Supercapacitor Electrode Materials Prepared By Mno2 With Four Different Crystal Forms, Zhen-Kun Wei, Xiao-Zhen Hua, Ke Xiao, Xian-Liang Zhou, Zhi-Guo Ye

Journal of Electrochemistry

Four types of α-MnO2, β-MnO2, γ-MnO2 and δ-MnO2 powders were synthesized by relatively simple methods. The differences in crystal structures and surface morphologies for these forms of MnO2 were investigated by using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA) and specific surface area analysis (BET). The electrochemical performances were characterized by cyclic voltammetry (CV) and stability analysis. Based on the experimental results, four kinds of MnO2 electrodes showed good capacity properties, and the α-MnO2 electrode had the largest specific capacity due to the highest specific surface …

Go to article

Effect Of Adsorption Potential On Co Oxidation At Au@Pt Nanoparticles Electrodes, A Surface Enhanced Raman Spectroscopic Study, Pu Zhang, Yi Wei, Yong-Li Zheng, Yan-Xia Chen, Zhong-Qun Tian Aug 2015

Effect Of Adsorption Potential On Co Oxidation At Au@Pt Nanoparticles Electrodes, A Surface Enhanced Raman Spectroscopic Study, Pu Zhang, Yi Wei, Yong-Li Zheng, Yan-Xia Chen, Zhong-Qun Tian

Journal of Electrochemistry

The adsorption/oxidation of CO on the 55 nm [email protected] nm Pt nanoparticles electrode in both potentiodynamic and potentiostatic modes were investigated by surface enhanced Raman spectroscopy in a thin layer electrochemical flow cell under controlled mass transport, with the aim of clarifying the origin CO oxidation at lower electrode potentials (in current pre-wave region of corresponding cyclic voltammograms). Our results demonstrated that the CO oxidation kinetics differed significantly from the three kinds of different CO adsorption history, with almost no CO oxidation current in the pre-peak potential region after 0.35 VRHE CO adsorption with or without subsequent holding the …

Go to article

Broadband Sum-Frequency Generation Spectroscopic Invstigations Of Thiocyanate On Polycrystalline Au Electrode In Alkaline Solutions, Mei Xu, Jing-Jing Wang, Zhi-Chao Huangfu, Ng Ying Wa, Yu-Han He, Zhao-Hui Wang Aug 2015

Broadband Sum-Frequency Generation Spectroscopic Invstigations Of Thiocyanate On Polycrystalline Au Electrode In Alkaline Solutions, Mei Xu, Jing-Jing Wang, Zhi-Chao Huangfu, Ng Ying Wa, Yu-Han He, Zhao-Hui Wang

Journal of Electrochemistry

Broadband sum frequency generation (BB-SFG) spectroscopy has been used to investigating the potential-dependent adsorption behaviors of thiocyanate ions on polycrystalline Au electrode in alkaline solutions. During the positive scan, a change in the Stark slope (dωC-N/dE) for C—N stretching mode can be observed in the range of -1.1 V ~ 0.2 V (vs. SCE), which implies that the orientation of adsorbed thiocyanate ions at Au electrode surface changes from N-bound (dωC-N/dE=45 cm-1·V-1) form to S-bound (dωC-N/dE = 16.2 cm-1·V-1 …

Go to article

Synthesis And Electrochemical Performance Of Mn3O4/Graphene Composites, Shan-Shan Yang, Qian Zhang, Xiong-Gui Lin, Ming-Sen Zheng, Quan-Feng Dong Aug 2015

Synthesis And Electrochemical Performance Of Mn3O4/Graphene Composites, Shan-Shan Yang, Qian Zhang, Xiong-Gui Lin, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The Mn3O4/Graphene composites were synthesized by hydrothermal method with the in-situ redox reaction of graphene oxide (GO) and manganese acetate (Mn(Ac)2). The phase structures and morphologies of the materials were characterized by XRD, SEM and TEM. The XPS and IR techniques were used for studying the residual function groups of reduced graphene oxide (RGO). The electrochemical performances of the hybrids were tested in a coin cell. Results showed that the composites prepared with the addition of ammonia water (RM-A) have better performance. The graphenes in RM-A were better-reduced and the Mn3O4 …

Go to article

First Prev Next Last