Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 781 - 810 of 2388

Full-Text Articles in Physical Chemistry

Electrochemical Synthesis Of Porous Polyaniline Electrodes Using Hkust-1 As A Template And Their Electrochemical Supercapacitor Property, Qiong Luan, Chun-Feng Xue, Hong-Ye Zhu, Fu-Juan Yang, Xu-Li Ma, Xiao-Gang Hao Feb 2017

Electrochemical Synthesis Of Porous Polyaniline Electrodes Using Hkust-1 As A Template And Their Electrochemical Supercapacitor Property, Qiong Luan, Chun-Feng Xue, Hong-Ye Zhu, Fu-Juan Yang, Xu-Li Ma, Xiao-Gang Hao

Journal of Electrochemistry

Excellent electrode plays vital important role in the performance of supercapacitors. Polyaniline (PANI) with good conductivity is often used to prepare electrode. However, its available surface is limited and results in a poor supercapacitance in many cases. It is desirable to fabricate an electrode containing electroactive PANI with high surface area deriving from its porous structure. Here, the metal-organic framework (MOF) material with high surface area was selected as a hard template for synthesizing porous PANI. Microporous PANI composite electrodes (Micro-PANI/CC) were fabricated by depositing aniline on to carbon cloth (CC) pre-coated with MOF material of HKUST-1 using a unipolar …

Go to article

Sn-Doped Α-Fe2O3 Photocatalyst Containing Oxygen Vacancy For Water-Splitting, Zu-Hua Wang, Dong-Fang Niu, Hui-Cheng Li, Rong-Bin Du, Heng Xu, Xin-Sheng Zhang Feb 2017

Sn-Doped Α-Fe2O3 Photocatalyst Containing Oxygen Vacancy For Water-Splitting, Zu-Hua Wang, Dong-Fang Niu, Hui-Cheng Li, Rong-Bin Du, Heng Xu, Xin-Sheng Zhang

Journal of Electrochemistry

The α-Fe2O3 nanoparticles containing oxygen vacancies were synthesized in atmospheric N2 by dip-dropping method without a high vacuum employed before annealing. The influences of annealing atmosphere and Sn-doping on the photocatalytic performance of α-Fe2O3 nanoparticles were studied by annealing the photocatalyst in N2 or air and adding SnCl4 to the precursor directly. The results showed that the current density of Sn-doping α-Fe2O3 annealed in N2 at 550 °C and 1.23 V (vs. RHE) was 35 times greater than that of pristine α-Fe2O3 annealed in …

Go to article

Preparation And Electrochemical Properties Of Attapulgite-Supported Nitrogen-Doped Carbon@Nico2O4 Composites For Supercapacitors, Hui Wan, Zong-Rong Ying, Xin-Dong Liu, Jian-Jian Lu, Wen-Wen Zhang Feb 2017

Preparation And Electrochemical Properties Of Attapulgite-Supported Nitrogen-Doped Carbon@Nico2O4 Composites For Supercapacitors, Hui Wan, Zong-Rong Ying, Xin-Dong Liu, Jian-Jian Lu, Wen-Wen Zhang

Journal of Electrochemistry

In this work, the attapulgite-supported nitrogen-doped carbon (ANC) was prepared by in-situ chemically polymerizing polyaniline coating upon attapulgite, followed by high temperature heat treatment, and then NiCo2O4was reacted onto the surface of ANC by a combination of hydrothermal reaction and calcination to synthesize ANC@NiCo2O4 composites. The chemical composition and morphology of the samples were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N2 adsorption/desorption. The electrochemical properties were evaluated by means of constant current charge discharge (GCD) and cyclic voltammetry (CV). …

Go to article

Preparations Of Mno2 Reference Electrodes For Corrosion Monitoring Of Reinforced Concrete, Li Yang, Bing Xu, Hai Wang, Ze-Hua Dong Feb 2017

Preparations Of Mno2 Reference Electrodes For Corrosion Monitoring Of Reinforced Concrete, Li Yang, Bing Xu, Hai Wang, Ze-Hua Dong

Journal of Electrochemistry

In this work, the solid reference electrode was assemblied by using the electrochemically synthesized manganese dioxide (MnO2) (EMD) powder, gel electrolyte and thin mortar layer for the durability evaluation of concrete. The EMD reference electrode exhibited higher potential stability (< 10 mV drift) than the chemically synthesied MnO2 (CMD) based on half year potential tests in the saturated Ca(OH)2 solution and hardened mortar. In addition, the EMD electrode was almost insensitive to the presences of chloride ion and corrosion inhibitor. Electrochemical impedance and polarization curves indicate that the EMD electrode had lower charge transfer resistance,higher exchange current density and lower temperature coefficient than the …

Go to article

Aligning Electronic Energy Levels On The Anatase Tio2(101) Surface, Jun-Jie Zhao, Jun Cheng Feb 2017

Aligning Electronic Energy Levels On The Anatase Tio2(101) Surface, Jun-Jie Zhao, Jun Cheng

Journal of Electrochemistry

As one of the most commonly-used materials for photocatalysis and solar energy conversion, titanium dioxide (TiO2) has been extensively studied for more than 40 years. Its photoelectrochemical activity crucially depends on the band positions at the interface. In this work, the valence band maximum (VBM) and conduction band minimum (CBM) of a model TiO2 surface are computed using the standard work function method at the level of Perdew-Burke-Ernzerhof (PBE) density functional, which are then converted to the scale of the standard hydrogen electrode (SHE) by subtracting the absolute SHE potential. Comparing with the rutile TiO2(110) …

Go to article

An Investigation In The Performance Of Lithium Sulfur Battery With A Tic Coated Separator, Jian-Hua Fang, Yong Cao, Mao-Ping Yang, Ming-Sen Zheng, Quan-Feng Dong Feb 2017

An Investigation In The Performance Of Lithium Sulfur Battery With A Tic Coated Separator, Jian-Hua Fang, Yong Cao, Mao-Ping Yang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

To improve the specific capacity and cycle stability of lithium-sulfur (Li-S) battery, a TiC/Celgard coating separator was developed and its performance in Li-S battery was investigated. The electrochemical test results confirmed that the TiC coating layer could significantly increase the capacity and cycle stability. At a high rate of 2C, it still delivered the capacity of 650 mAh·g-1. At 0.5C, the specific capacity was maintained at 841.3 mAh·g-1 after 100 cycles.

Go to article

Direct Electrochemistry Of Glucose Oxidase Based On Ws2 Quantum Dots And Its Biosensing Application, Chen-Lu Li, Hua-Ping Peng, Zhong-Nan Huang, Yi-Lun Sheng, Pei-Wen Wu, Xin-Hua Lin Feb 2017

Direct Electrochemistry Of Glucose Oxidase Based On Ws2 Quantum Dots And Its Biosensing Application, Chen-Lu Li, Hua-Ping Peng, Zhong-Nan Huang, Yi-Lun Sheng, Pei-Wen Wu, Xin-Hua Lin

Journal of Electrochemistry

In this study, a novel electrochemical glucose biosensor has been developed by immobilizing glucose oxidase (GOx) on tungsten disulfide quantum dots (WS2 QDs) on the surface of glassy carbon electrode (GCE). Transmission electron microscopy, UV-vis spectroscopy and cyclic voltammetry were employed to characterize the morphology, structure, and electrochemical behaviors of the as-prepared WS2 QDs and the biofilm modified electrode. The results suggested that the WS2 QDs could accelerate the electron transfer between the electrode and the immobilized enzyme, which enabled the direct electrochemistry of GOx without any electron mediator. Besides, the immobilized GOx in WS2 QDsfilm …

Go to article

Application Of Adamantane Schiff Base Nickel Complexes/Graphene Oxide/Glassy Carbon Modified Electrode In Detection Of Carmine, Peng Guo, Zheng Liu, Hai-Ying Li, Li-Ming Ma Feb 2017

Application Of Adamantane Schiff Base Nickel Complexes/Graphene Oxide/Glassy Carbon Modified Electrode In Detection Of Carmine, Peng Guo, Zheng Liu, Hai-Ying Li, Li-Ming Ma

Journal of Electrochemistry

The Schiff base nickel complexes/graphene oxide/glassy carbon electrodes were prepared by embedded method and electrodeposition on which were used to quantitatively detect the contents of carmine. Cyclic voltammetry, chronoamperometry, scanning electron microscopy (SEM) and other methods were employed to characterize properties and morphologies of the modified electrodes. The results show that the adamantane double Schiff base nickel complexes/graphene oxide/glassy carbon electrode had high electric catalytic activity toward carmine oxidation reaction, and might provide an easy and quick way to detect carmine content with good reproducibility.

Go to article

Reply To ‘On The Bonding In Ligand-Protected Gold Clusters’, Wen Wu Xu, Xiao Cheng Zeng, Yi Gao Jan 2017

Reply To ‘On The Bonding In Ligand-Protected Gold Clusters’, Wen Wu Xu, Xiao Cheng Zeng, Yi Gao

Xiao Cheng Zeng Publications

In the recent Correspondence, Professor Henrik Grönbeck made several comments on the recently developed grand unified model (GUM), in particular using the ligand-protected gold cluster [Au25(SR)18]1− as an example. We noted that the latter cluster can be viewed as belonging to a special group of ligand-protected gold clusters that contain one or several icosahedral Au13 motifs. For this group of clusters, a secondary block Au13(8e) has been identified as a more convenient way to describe their structure anatomy and evolution. Another extension of the GUM is the identification of the new elementary …

Go to article

Probing The Structural Evolution Of Gold−Aluminum Bimetallic Clusters (Au2AlN−, N = 3−11) Using Photoelectron Spectroscopy And Theoretical Calculations, Navneet S. Khetrapal, Tian Jian, Gary V. Lopez, Seema Pande, Lai-Sheng Wang, Xiao Cheng Zeng Jan 2017

Probing The Structural Evolution Of Gold−Aluminum Bimetallic Clusters (Au2AlN−, N = 3−11) Using Photoelectron Spectroscopy And Theoretical Calculations, Navneet S. Khetrapal, Tian Jian, Gary V. Lopez, Seema Pande, Lai-Sheng Wang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We report a combined photoelectron spectroscopy and theoretical study of the structural evolution of aluminum cluster anions doped with two gold atoms, Au2Aln– (n = 3−11). Well-resolved photoelectron spectra have been obtained at several photon energies and are used to compare with theoretical calculations to elucidate the structures of the bimetallic clusters. Global minima of the Au2Aln– clusters were searched using the basin-hopping method combined with density functional theory calculations. Vertical detachment energies were computed for the low-lying isomers with the inclusion of spin−orbit effects and were used to generate simulated …

Go to article

Choline Chloride Eutectics: Low Temperature Applications, Kaila M. Kuehn, Camille M. Massmann, Natalie R. Sovell Jan 2017

Choline Chloride Eutectics: Low Temperature Applications, Kaila M. Kuehn, Camille M. Massmann, Natalie R. Sovell

The Journal of Undergraduate Research

Deep eutectic solvents (DESs) have a lower melting point than each of their individual components due to ion dipole interactions or hydrogen bonding. Traditionally, DES are used for processing metals through plating and have many synthesis applications. DES are able to be substituted for hazardous solvents that are traditionally used for metal plating and synthesis. This, along with many other advantageous properties, appear promising for the use of DESs as solvents or for use in electrochemical systems, particularly at low temperatures. Choline chloride:propylene glycol was a novel DES synthesized and analyzed for its properties, including melting point, viscosity, conductivity, heat …

Go to article

Rationalizing The Band Gap Tunability Of Semiconductors Via Electronic Structure Calculations, Matthew N. Srnec Jan 2017

Rationalizing The Band Gap Tunability Of Semiconductors Via Electronic Structure Calculations, Matthew N. Srnec

Electronic Theses and Dissertations

The polymorphs of titanium dioxide and various diamond-like semiconductor materials are promising candidates in photovoltaic solar cell applications. Several of these polymorphs have been studied with experimental and computational methods, which often aim at tuning the electronic structure, particularly the band gap value of the crystalline solid. Prior studies report that the addition of a substituent into the structure of titanium dioxide decreases its band gap value, but the reasons for this are unknown. Possible explanations for the change in band gap involve the substituent atom's crystal radius, electronegativity, and ionization energy. Understanding the cause of these changes will provide …

Go to article

Criegee Intermediate-Hydrogen Sulfide Chemistry At The Air/Water Interface, Manoj Kumar, Jie Zhong, Joseph S. Francisco, Xiao Cheng Zeng Jan 2017

Criegee Intermediate-Hydrogen Sulfide Chemistry At The Air/Water Interface, Manoj Kumar, Jie Zhong, Joseph S. Francisco, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We carry out Born–Oppenheimer molecular dynamic simulations to show that the reaction between the smallest Criegee intermediate, CH2OO, and hydrogen sulfide (H2S) at the air/water interface can be observed within few picoseconds. The reaction follows both concerted and stepwise mechanisms with former being the dominant reaction pathway. The concerted reaction proceeds with or without the involvement of one or two nearby water molecules. An important implication of the simulation results is that the Criegee-H2S reaction can provide a novel non-photochemical pathway for the formation of a C–S linkage in clouds and could be a …

Go to article

Investigations Into Structure And Properties Of Atomically-Precise Transition Metal-Chalcogenide Clusters Of Crte And Ligated Cr6te8(Pet3)6, Anthony F. Pedicini Jan 2017

Investigations Into Structure And Properties Of Atomically-Precise Transition Metal-Chalcogenide Clusters Of Crte And Ligated Cr6te8(Pet3)6, Anthony F. Pedicini

Theses and Dissertations

The complete understanding of a clusters electronic structure, the primary mechanisms for its properties and stabilization is necessary in order to functionalize them for use as building blocks within novel materials. First principle theoretical studies have been carried out upon the electronic properties of CrxTey (x = 1 – 6, y = 0 – 8, x + y ≤ 14), as well as for the larger triethylphosphine (PEt3) ligated cluster system of Cr6Te8(PEt3)6. Together, we aim to use the information garnered from the smaller clusters to address …

Go to article

Characterization And Application Of Hybrid Nanostructures For Enhanced Biological Imaging Using Fluorescence Microscopy Techniques, William E. Martin Jan 2017

Characterization And Application Of Hybrid Nanostructures For Enhanced Biological Imaging Using Fluorescence Microscopy Techniques, William E. Martin

Theses and Dissertations--Chemistry

Fluorescence microscopy is a powerful tool for interpreting the structure and function of biomolecules, and their interactions with one another. Understanding fundamental biological mechanisms is important to the development of improved treatments for a variety of diseases. Fluorescent tags are used to track the motion and longevity of such events, with the ability to monitor several biomolecules at once. Currently, many of these studies are conducted using bulk measurements, or several biological events at the same time, because the added light from several emitters can more easily overcome the high fluorescence background inherent to biological systems. Although important in their …

Go to article

Charge Transport In Electronic-Ionic Composites, Long Zhang Jan 2017

Charge Transport In Electronic-Ionic Composites, Long Zhang

Theses and Dissertations--Chemical and Materials Engineering

The goal of this thesis is to generate fundamental understandings of charge transport behaviors of composites consisting of garnet structured Al substituted Li7La3Zr2O12 (LLZO) electrolyte and LiCoO2 electrode. In order to take full advantage of all-solid-state batteries, bulk type composite electrodes should be introduced to increase energy and power density. However, the charge utilization of bulk type composite electrodes is quite low. Understanding ionic conduction behavior is, therefore, important for improving the performance of all-solid-state batteries, because ion conduction within solids depends on effective pathways. Electronic conductivity can be easily compensated by …

Go to article

Photoluminescence Mechanism And Applications Of Graphene Quantum Dots, Yiyang Liu Jan 2017

Photoluminescence Mechanism And Applications Of Graphene Quantum Dots, Yiyang Liu

Theses and Dissertations--Chemistry

Graphene quantum dots (GQDs) are small pieces of graphene oxide whose physical dimensions are so confined (a few to a few tens nm) that they have a finite bandgap due to a quantum confinement effect. The finite bandgap of GQDs grants them pronounced absorption bands and a substantial photoluminescence. These optical properties are rarely observed in traditional carbon materials, since most of carbon materials are metallic with a near-zero bandgap and thus have broad absorption spectra with no photoluminescence. The unique optical properties of GQDs, along with GQDs’ inherited advantages from carbon material family (cheap, abundant, non-toxic), make GQDs an …

Go to article

Preparation And Evaluation Techniques Of Porous Materials And Mixed Matrix Membranes For Targeted Co2 Separation Applications, Tsemre Tessema Jan 2017

Preparation And Evaluation Techniques Of Porous Materials And Mixed Matrix Membranes For Targeted Co2 Separation Applications, Tsemre Tessema

Theses and Dissertations

The use of porous sorbents for physisorptive capture of CO2 from gas mixtures has been deemed attractive due to the low energy penalty associated with recycling of such materials. Porous organic polymers (POPs) have emerged as promising candidates with potential in the treatment of pre- and post- fuel combustion processes to separate CO2 from gas mixtures. Concurrently, significant advances have been made in establishing calculation methods that evaluate the practicality of porous sorbents for targeted gas separation applications. However, these methods rely on single gas adsorption isotherms without accounting for the dynamic gas mixtures encountered in real-life applications. …

Go to article

Size And Shape Control In Metal Nanoparticles And Nanocomposites, Tomendro Subedi Jan 2017

Size And Shape Control In Metal Nanoparticles And Nanocomposites, Tomendro Subedi

Theses and Dissertations (Comprehensive)

This thesis describes major findings on the shape transformation of the precursor silver decahedral nanoparticles (AgDeNPs) with pentagonal symmetry and twin defects into silver pentagonal prism nanoparticles (AgPPNPs) using Br¯ as a shape selective reagent. Silica-encapsulation of the gold-plated AgDeNPs was also carried out forming ordered arrays of silica encapsulated gold-plated AgDeNPs (SiO2@Au@AgDeNPs) of different sizes. At first, synthetic procedures for AgDeNPs (pentagonal bipyramids), silver pentagonal rod nanoparticles (AgPRNPs) and gold-plating of AgDeNPs (Au@AgDeNPs) were optimized. Gold plating enhances the chemical stability of AgDeNPs and preserves the superior plasmonic properties of silver. This thesis deals with the transformation …

Go to article

A Density Functional Theory Study Of Intrinsically Chiral Semiconductor Nanocrystals, Richard Edwards Jan 2017

A Density Functional Theory Study Of Intrinsically Chiral Semiconductor Nanocrystals, Richard Edwards

Theses and Dissertations (Comprehensive)

A plethora of work has been done in the area of nanoparticles of late due to the fact that chemists (and physicists) have discovered that the properties of nanoparticles differ from both those of the bulk material and the atoms themselves. Nanoparticles have become of high interest for the use as catalysts while materials like graphene, being only one atom thick, have been shown to be great electrical conductors in comparison with the 3D structure of diamond. Among these peculiar nanoscale properties is the phenomenon of nanochirality, where a nanoparticle can exhibit chirality that does not extend to the macroscale …

Go to article

Lithium Plating Identification From Degradation Behaviors Of Lithium-Ion Cells, Jian-Bo Zhang, Lai-Suo Su, Xin-Yu Li, Hao Ge, Ya-Kun Zhang, Zhe Li Dec 2016

Lithium Plating Identification From Degradation Behaviors Of Lithium-Ion Cells, Jian-Bo Zhang, Lai-Suo Su, Xin-Yu Li, Hao Ge, Ya-Kun Zhang, Zhe Li

Journal of Electrochemistry

Lithium plating has huge impact on the lifetime and safety of lithium-ion cells. It is, therefore, necessary to identify lithium plating. In this study, the accelerated stress tests of lithium-ion cells were conducted under different conditions with multi-stress loads. Based on the different effects of the two major aging mechanisms, namely, SEI (Solid Electrolyte Interface) layer growth and lithium plating, on the degradation behaviors, two lithium plating identification methods of resistance-capacity plot and Arrhenius plot were employed. The experimental results revealed that the two identification methods are highly consistent with each other. Furthermore, the origins of capacity loss were distinguished …

Go to article

Investigation On Laser Induced Deposition Of Cu-Based Materials At [Bmim]Bf4/Pt Electrode Interface, Min-Min Xu, Jin-Hua Mei, Jian-Lin Yao, Ren-Ao Gu Dec 2016

Investigation On Laser Induced Deposition Of Cu-Based Materials At [Bmim]Bf4/Pt Electrode Interface, Min-Min Xu, Jin-Hua Mei, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

By controlling the negative potential, Cu-based materials were deposited at the [BMIm]BF4/Pt electrode interface under the laser irradiation. The effects of laser power and irradiation time on the yield of deposition products were studied by using different laser powers and different irradiation time. The product yield could be directly determined by the size of deposition point through the observation from the optical microscope. Further mechanism study combined with the formula deduced that the thermal effect of the laser could make the electrode surface temperature rise 110 degrees, which can promote the occurrence of electrodeposition. By SEM characterization, the …

Go to article

An Stm Study On The Structure Of Pt(100)/Ionic Liquid Omipf6 Interface, Jin Peng, Mian-Gang Li, Li-Qiang Xie, Jia-Wei Yan, Bing-Wei Mao Dec 2016

An Stm Study On The Structure Of Pt(100)/Ionic Liquid Omipf6 Interface, Jin Peng, Mian-Gang Li, Li-Qiang Xie, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Potential-dependent structures of Pt(100)/ionic liquid 1-methyl-3-octylimidazolium hexafluorophosphate (OMIPF6) interface have been studied by electrochemical scanning tunneling microscopy (ECSTM). The cation OMI+ forms ordered structure on Pt(100) surface, which exists in a potential region of about 1.2 V. When the potential is more negative than -0.6 V, it can be seen that the ordered structure transforms to disordered structure. When the potential shifts positively to +0.6 V, the desorption of cations OMI+ occurs, which indicates that strong electrostatic repulsion is needed to overcome chemical interaction between OMIPF6 and Pt(100) surface, leading to the desorption. The above results …

Go to article

A Study On The Oxidation Of Hydrogen Peroxide At Au(111) And Au(100) Electrodes, Yong-Li Zheng, Jie Wei, Yan-Xia Chen Dec 2016

A Study On The Oxidation Of Hydrogen Peroxide At Au(111) And Au(100) Electrodes, Yong-Li Zheng, Jie Wei, Yan-Xia Chen

Journal of Electrochemistry

The oxidation reactions of hydrogen peroxide (H2O2) at Au(111) and Au(100) electrodes in 0.1 mol·L-1 HClO4 were investigated by using rotating disk electrode system. It was found that H2O2 could be readily oxidized to O2 at both Au(100) and Au(111) surfaces with the onset potential close to its equilibrium potential. In contrast, the onset overpotential for H2O2 reduction was above 0.4 V, while the onset overpotential for H2O2 oxidation at Au(100) was ca. 0.1 V more negative than that at Au(111), this is probably …

Go to article

Lithium-Sulfur (Selenium) Batteries: Interface Issues And Solving Strategies, Nian-Wu Li, Ya-Xia Yin, Yu-Guo Guo Dec 2016

Lithium-Sulfur (Selenium) Batteries: Interface Issues And Solving Strategies, Nian-Wu Li, Ya-Xia Yin, Yu-Guo Guo

Journal of Electrochemistry

The stable interface is still a challenge for lithium-sulfur (selenium) batteries because of the low conductivity of sulfur (selenium), dissolution of polysulfide (polyselenide), volume expansion of sulfur (selenium), and lithium dendrite growth. This review describers some recent developments in lithium-sulfur (selenium) batteries and highlights our efforts in this field. The possible strategies for building stable interface in the lithium-sulfur (selenium) batteries including nano-restriction effect, chemical bonding, interface adsorption, surface coating, electrolyte optimization, and Lithium anode treatment have been discussed.

Go to article

Stm Investigation Of Oxygen Reduction Reaction On Solid Interface In Fuel Cell, Zhen-Feng Cai, Bing Sun, Wen-Jie Jiang, Ting Chen, Dong Wang, Li-Jun Wan Dec 2016

Stm Investigation Of Oxygen Reduction Reaction On Solid Interface In Fuel Cell, Zhen-Feng Cai, Bing Sun, Wen-Jie Jiang, Ting Chen, Dong Wang, Li-Jun Wan

Journal of Electrochemistry

An electrocatalyst for oxygen reduction reaction (ORR) is an important component for fuel cells. An investigation at interfacial electrochemical reactions toward ORR at a molecular scale benefits mechanistic understanding as well as rational design of catalysts. Scanning tunneling microscopy (STM) has been proven to be a powerful tool to monitor chemical reactions and to provide in-situ information about the interfacial electrochemical reactions at a molecular level. This review summarizes the recent STM studies in monitoring the interface processes such as morphological changes, molecular changes, reaction intermediates, and oxidation products. The prospects of future development in this field are outlined.

Go to article

Syntheses Of Ag@Pd@Pt Nanoparticles With Tunable Shell Thickness For Electrochemical Oxidation Of Formic Acid, Xiao-Dong Lin, Du-Hong Chen, Zhong-Qun Tian Dec 2016

Syntheses Of Ag@Pd@Pt Nanoparticles With Tunable Shell Thickness For Electrochemical Oxidation Of Formic Acid, Xiao-Dong Lin, Du-Hong Chen, Zhong-Qun Tian

Journal of Electrochemistry

In an effort to lower cost of a catalyst, the silver (Ag) core with palladium (Pd) layer then platinum (Pt) island (Ag@Pd@Pt) nanoparticles were synthesized and the electrocatalytic activity of Ag@Pd@Pt nanoparticles on formic acid was compared with that of Au@Pd@Pt nanoparticles reported previously. The results showed that the existence of a small amount of Pt could significantly improve the activity of the catalyst. When the surface coverage of Pt approached 0.5 monolayers, the activity of Ag@Pd@Pt nanoparticles reached the maximum. Though the onset potential of the electro-oxidation was slightly more positive (about 50 mV), the overall electrocatalytic activity of …

Go to article

Intrinsic Interfacial Property Between High-Voltage Lini0.5Mn1.5O4 Cathode And Electrolyte, Li Li, Jing-Jing Xu, Shao-Jie Han, Wei Lu, Li-Wei Chen Dec 2016

Intrinsic Interfacial Property Between High-Voltage Lini0.5Mn1.5O4 Cathode And Electrolyte, Li Li, Jing-Jing Xu, Shao-Jie Han, Wei Lu, Li-Wei Chen

Journal of Electrochemistry

To obtain high energy density, developing high-voltage cathode materials is an effective approach. The cathode/electrolyte interface stability is the key factor for the cycle performance and safety performance of high-voltage lithium ion batteries. It is, therefore, of significant importance to study the stability of cathode/electrolyte interface. However, many reports have shown that at the cathode/electrolyte interface the cathodes were prepared by coating the mixture of active materials with a conductive additive and a binder on an Al current collector. The introduction of additives will interfere the surface morphology and component analyses, resulting in difficulty to acquire the intrinsic information at …

Go to article

Electrochemical Behaviors And Determinations Of Terbutaline Sulfate At Poly Eriochrome Black T Modified Electrode, Yan-Jie Zheng, Hong Yao, Shao-Huang Weng, Hua-Ping Peng, Shi-Wen Gong, Li Huang, Qiang Dai, Xin-Hua Lin Dec 2016

Electrochemical Behaviors And Determinations Of Terbutaline Sulfate At Poly Eriochrome Black T Modified Electrode, Yan-Jie Zheng, Hong Yao, Shao-Huang Weng, Hua-Ping Peng, Shi-Wen Gong, Li Huang, Qiang Dai, Xin-Hua Lin

Journal of Electrochemistry

The poly eriochrome black T modified electrode was prepared by electropolymerization. This modified electrode was characterized by scanning electron microscopy(SEM), electrochemical impedance spectroscopy(EIS) and cyclic voltammetry (CV). The electrochemical behaviors of terbutaline sulfate were studied by CV, while the recoveries were measured by differential pulse voltammetry (DPV). The modified electrode shows excellent electrocatalytic characteristics for terbutaline sulfate. In pH 7.0 phosphate buffer solution, the oxidation peak currents obtained by DPV were linear to the terbutaline sulfate concentrations over the range of 1.2x10-7~2.0x10-6 mol•L-1. The detection limit was estimated to be 1.5x10-8  mol•L-1 and …

Go to article

Chitosan/Nonahydrate Gel Derived Fe-N-Doped Porous Carbon Sheet As High-Efficient Orr Electrocatalyst, Fan-Lu Meng, Xin-Bo Zhang, Jun-Min Yan Dec 2016

Chitosan/Nonahydrate Gel Derived Fe-N-Doped Porous Carbon Sheet As High-Efficient Orr Electrocatalyst, Fan-Lu Meng, Xin-Bo Zhang, Jun-Min Yan

Journal of Electrochemistry

The chitosan/nonahydrate gel was used as a precursor to realize the uniform mixture of N-polymer and metal salt. After lyophilization treatment, the gel went through heat treatment and acid etch. Accordingly, the Fe-N-doped porous carbon sheet with homogenous composition and microstructure was prepared. Compared with the commercial Pt/C catalyst, the Fe-N-doped porous carbon sheet exhibited more positive onset potential and half-wave potential, higher current density, and especially, excellent durability. The power density of 318 mW·cm-2 was obtained in alkaline fuel cell with the Fe-N-doped porous carbon sheet as a cathode catalyst, which is higher than 267 mW·cm-2 with …

Go to article

First Prev Next Last