Physical Chemistry Commons^™

A Model For The Anodic Carbonization Of Alkaline Polymer Electrolyte Fuel Cells, Qi-Hao Li, Ying-Ming Wang, Hua-Long Ma, Li Xiao, Gong-Wei Wang, Jun-Tao Lu, Lin Zhuang

Journal of Electrochemistry

The alkaline polymer electrolyte fuel cell (APEFC) has made appreciable progress in recent years but is still suffering performance loss during discharge with air as the oxidant. Several theories have been suggested to interpret the loss. However, efforts are still needed to reach a clear quantitative understanding. Based on the major experimental findings in combination with thermodynamics and kinetics of the reactions involved in the anode, this paper presents a model featuring layered carbonization in the anode and relevant grouped equations. The simulation results generated from the latter are compared with experiments, and possible principles to suppress the performance loss …

Porous-Electrode Theory Of Lithium Ion Battery: Old Paradigm And New Challenge, Xiao-Xiao Wang, Zi-Rui Zhou, Qiang Shan, Zeng-Ming Zhang, Jun Huang, Yu-Wen Liu, Sheng-Li Chen

Journal of Electrochemistry

A critical review on the porous electrode theory developed by Newman and his colleagues is presented. We propose several ideas for further development of this theory by analyzing its limitations. The classical Newman theory does not consider ion steric effect in describing ion transport in electrolyte solutions, which can be amended by a newly developed ion-vacancy coupled charge transfer model for ion transport in concentrated solutions. Ion transport in solid particles of active materials is essentially an ion-electron coupled transport process, and its rationality is verified by comparing the calculated and experimental diffusion coefficients of Li ⁺ ion in intercalation …

Porous Electrodes In Electrochemical Energy Storage Systems, Wei-Xiao Ji, Gong-Wei Wang, Qiang Wang, Li-Jun Bai, De-Yang Qu

Journal of Electrochemistry

Professor C.S. Cha was among the pioneers who have introduced modern electrochemistry to China. Under his leadership, the electrochemical research group in Wuhan University became one of the global powerhouses in fundamental and applied electrochemical researches. During the past many decades, Professor Cha and his colleagues in the university have educated and trained many students who have become part of the backbone of electrochemistry worldwide. In this review, we demonstrate the solid foundation laid by Professor Cha and his colleagues in Wuhan University, and the advancements made in the area of porous electrodes by the authors. All the authors in …

Progress And Prospects On Multifunctional Coating Separators For Lithium-Sulfur Battery, Zhuang-Zhuang Wei, Nan-Xiang Zhang, Feng Wu, Ren-Jie Chen

Journal of Electrochemistry

The development of advanced energy storage systems is crucial to meet the growing demand for electric vehicles, portable devices and renewable energy storage. Lithium-sulfur (Li-S) batteries, with their advantages of high specific energy, low cost of raw materials and environmental friendliness, are hotspots in the research field of new high performance batteries. However, there are still many problems which hinder the practical applications of lithium-sulfur batteries, such as the shuttle effect of soluble polysulfide intermediates, the growth of lithium dendrites, and the thermal stability and safety of lithium-sulfur batteries during use. The design of multifunctional coating separator is one of …

Licoo2 As Sulfur Host To Enhance Cathode Volumetric Capacity For Lithium-Sulfur Battery, Lu Wang, Xue-Ping Gao

Journal of Electrochemistry

Lithium-sulfur battery is one of the most promising secondary battery systems due to its super high theoretical gravimetric and volumetric energy densities (2600 Wh·kg^-1 and 2800 Wh·L^-1, respectively). However, the practical volumetric capacity of sulfur cathode is still unsatisfied due to the overuse of low-density host materials, such as carbon nanomaterials. Herein, commercial LiCoO₂ with the high tap density of 2.94 g·cm^-3 was used as the host material to build high density sulfur-based composite and compact electrode for increasing the volumetric capacity. Obviously, the tap density of the as-prepared S/LiCoO₂ composite was 1.90 g·cm …

Research Progress Of Key Components In Lithium-Sulfur Batteries, Jia-Jia Chen, Quan-Feng Dong

Journal of Electrochemistry

Due to the much higher theoretical specific capacity and energy density than the ones of traditional lithium ion battery, Li-S batteries have long been at the pinnacle in the realms of high-energy Li-metal batteries. However, the complicated electrochemical reactions on the sulfur cathode and Li anode, induced by the thermodynamic and kinetic behaviors of lithium polysulfides, are the intrinsic bottleneck to realize the full potential of Li-S batteries for practical application. In this review, we firstly discuss the roles, and thermodynamic and kinetic behaviors of polysulfides in the charging and discharging processes of Li-S batteries. Then, the functional design and …

Fundamentals Of Distribution Of Relaxation Times For Electrochemical Impedance Spectroscopy, Jia Wang, Qiu-An Huang, Wei-Heng Li, Juan Wang, Quan-Chao Zhuang, Jiu-Jun Zhang

Journal of Electrochemistry

Electrochemical impedance spectroscopy (EIS) is a powerful electrochemical characterization technology, which has been widely used in the field of electrochemical energy, such as lithium-ion batteries, supercapacitors, fuel cells, etc. Distribution of relaxation time (DRT) is an EIS deconvolution technique which does not depend on the prior knowledge of the targeted research object. Furthermore, DRT can serve to separate and analyze physical and chemical processes which are highly overlapped in their EIS data. In order to encourage the application and popularization of DRT deconvolution technology, several core questions are addressed in this paper: (1) DRT deconvolution principle, implementation steps and important …

Recent Progress In Bifunctional Catalysts For Zinc-Air Batteries, Neng-Neng Xu, Jin-Li Qiao

Journal of Electrochemistry

Zinc-air battery has attracted great attention from researchers due to its high energy density and power density, which is expected to be widely used in energy conversion and storage. Air electrode as the core area of oxygen catalytic reaction is the focus of the entire zinc-air battery research. Recently, many research achievements have been made in non-noble metal bifunctional catalysts/electrodes with high activity, low cost and abundant species. In this review, we mainly focus on the reaction mechanism and the recent progress in non-noble metal oxide catalyst, carbon-based catalyst, and carbon-based transition metal compound composite and self-supporting electrode. In addition, …

Research Progress Of Metal-Nitrogen-Carbon Catalysts Toward Oxygen Reduction Reaction Inm Changchun Institute Of Applied Chemistry, Ming-Jun Xu, Jie Liu, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The development of highly active and stable catalysts toward oxygen reduction reaction (ORR) has been facing severe challenges. In recent years, pyrolytic M-N-C catalysts and metal-organic framework derived materials made the performance of non-noble metal catalysts greatly improved, however, the molecular and atomic level understanding in the reaction active sites and the mechanism are still lacking. Here, we summarize the recent research progress made in the Changchun Institute of Applied Chemistry. We present a microporous metal-organic-framework confined strategy toward the preferable formation of ORR catalysts. Firstly, we studied the active site and proposed a new active site structure for the …

Electrochemical Carbon Dioxide Reduction In Flow Cells, Jia Fan, Na Han, Yan-Guang Li

Journal of Electrochemistry

Electrochemical carbon dioxide reduction (CO₂RR) is an appealing approach to convert atmospheric CO₂ to value-added fuels and industrial chemicals, and may play an important role during the transition to a carbon-neutral economy. In order to make this technology commercially viable, it is essential to pursue CO₂RR in flow reactors instead of conventional H-type reactors, and to combine electrocatalyst development with system engineering. In this review, we overview the cell configurations and performance advantages of the two types of flow reactors, analyze their shortcomings, and discuss the effects of their different components including gas diffusion electrode …

Electrolyte Tailoring For Electrocatalytic Reduction Of Stable Molecules, Jin-Han Li, Fang-Yi Cheng

Journal of Electrochemistry

Reduction of stable molecules such as CO₂ and N₂ is important process in electrochemical energy conversion and storage technologies for electrofuels production. However, for the inert nature of CO₂/N₂ molecule and competitive proton reduction in conventional aqueous electrolytes, selective electrochemical carbon/nitrogen fixation suffers from high overpotential, low reaction rate and low selectivity. While addressing these issues has witnessed substantial advances in electrocatalysts, much less attention has been placed on the electrolytes, which play an important role in regulating the local environment and thus the performance of catalysts under operating conditions. Rational design of electrolytes has …

Fuel Cell Performance Of Non-Precious Metal Based Electrocatalysts, Yan-Feng Zhang, Fei Xiao, Guang-Yu Chen, Min-Hua Shao

Journal of Electrochemistry

The commercialization of proton exchange membrane fuel cells (PEMFCs) is hindered by high cost and low durability of Pt based electrocatalysts. Developing efficient and durable non-precious metal catalysts is a promising approach to addressing these conundrums. Among them, transition metals dispersed in a nitrogen (N)-doped carbon support (M-N-C) show good oxygen reduction reaction activity. This article reviews recent progress in M-N-C catalysts development, focusing on the catalysts design, membrane electrode assembly fabrication, fuel cell performance, and durability testing. Template-assisted approach is an efficient way to synthesize M-N-C materials with homogeneously dispersed single atom active site and reduced metal particles, carbides …

Electrochemical Energy Storage And Conversion Based On Organic Electrodes, Jian-Hang Huang, Xiao-Li Dong, Zhao-Wei Guo, Yuan-Yuan Ma, Yan-Rong Wang, Yong-Gang Wang

Journal of Electrochemistry

Aqueous batteries have been considered to be a competitive candidate for large-scale energy storage. However, most of aqueous batteries adopt inorganic electrode materials with metallic elements, which are based on the reversible insertion of metal ions, making their application being highly hindered by limited cycle life, environmental issue, high cost and low reserves. On the other hand, organic electrode materials offer the advantages of abundant reserves, tunable structures, renewability and environmental benignity. Furthermore, the wide internal space enables these organics to flexibly store various charge carriers. Organics have been investigated as the alternative to inorganic electrode materials. Herein, we review …

Recent Progress On Enhancing Effect Of Nanosized Metals For Electrochemical Co2 Reduction, Yu-Ning Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

The electrochemical conversion of CO₂ to chemical raw material for further utilization shows promising future to alleviate global warming and realize carbon cycle in nature, which is of great significance to the green chemistry and sustainable development. This review briefly introduces the advantages of CO₂ electrochemical reduction (CO₂ER) and its basic reaction principles, and summarizes the recent progress in a series of activity enhancement strategies based on nanosized metal catalysts. The influences of alloy effect, interface engineering, synergistic effect, surface defect engineering and support effect on the catalytic performance of nanosized metals for CO₂ER …

Computational Elucidation Of The "Coloring Problem" In Rhenium Aluminum Silicon Compounds, Alec George Neeson

Graduate Theses/Dissertations

Re₁Si₁Al₁ and its related compounds are potential thermoelectric materials. Previously, it was reported to adopt a MoSi₂-type structure with Si and Al atoms statistically sharing the same crystallographic sites. This recent study indicates otherwise – Si and Al are segregated and occupy different sites when mixed with a 1:1:1 stoichiometry. To confirm and rationalize the segregation between Si and Al, this research studied this compound with first-principle calculations. Several model structures have been constructed for Re₁Si₁Al₁ including a number of different super-cell models. Energy analysis confirmed that the …

Chemistry And Biochemistry Authored Faculty Publications: Snapshot Of The Ranking Of Journals In Which They Published Based On Data From Journal Citation Reports (Jcr), Lutishoor Salisbury, Yang Tian, Jeremy Smith

University Libraries Faculty Publications and Presentations

This report presents a snapshot of the research output of the Chemistry and Biochemistry Department at the University of Arkansas for the period 2015-2019. The contents of the report were generated using Web of Science Core Collection databases and the Journal Citation Report only. It highlights the journals in which the researchers published and the ranking of those journals.

Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo

Journal of Science Education for Students with Disabilities

This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.

Ensemble And Single Particle Studies Of Cation Exchange In Cuins2/Zns Qds And Their Application In Super-Resolution Imaging, Anh Tue Nguyen

Graduate Theses and Dissertations

Colloidal quantum dots (QDs) have great potential in many applications such as bioimaging, light emitting diodes, solar cells and lasers. However, a great number of studies have been focused on Cd based (II-VI) and Pb (IV-VI) based materials which are not suitable for mass production. Therefore, alternative types of QD containing less toxic materials have been introduced, including CuInS2 QDs. This I-III-VI semiconductor nanocrystals also attract lots of attention due to their large Stock shift, long fluorescence lifetime and high defect tolerance, making them attractive emitters for applications in bioimaging, photovoltaics and light emitting diodes.

In the first project, we …

Synthesis And In Vitro Studies Of Polycaprolactone-Coated Superparamagnetic Iron Oxide Nanoparticles For Magnetic Hyperthermia Therapy, Nasab Ziba Hedayat

Student Works (2020-2029)

Research has garnered a great interest in utilization of superparamagnetic iron oxide nanoparticles (SPIONs) as magnetic nano-heating agents in hyperthermia cancer therapy by profiting from high apoptosis vulnerability of cancer cells at elevated temperatures. However, low oxidation resistance and high agglomeration tendency negatively affect magnetic characteristics of nanoparticles and subsequently their clinical efficiency. Particle surface modifications are potential approaches to endow SPIONs a range of desirable properties including high colloidal dispersity, low aggregation tendency, cytocompatibility, and high oxidation resistance. Currently, polymer coating has led to decrease magnetic hyperthermia efficiency through formation of intermediate layer between nanoheating agents and targeted cells. …

Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries, Xue Li, Zheng-Liang Gong

Journal of Electrochemistry

In recent years, research on lithium-sulfur (Li-S) batteries has received much attention because the sulfur positive electrode and the lithium metal negative electrode produce a high theoretical specific capacity (lithium metal ~ 3800 mAh·g^-1, sulfur ~ 1675 mAh·g^-1). In addition, sulfur is considered to be the most promising cathode material for secondary lithium batteries, due to its advantages of low price and environmental friendly. However, the practical application of conventional liquid Li-S batteries is still obstructed by several critical issues, such as lithium ploysulfides shuttle effect, long-term stability of lithium metal anode with organic liquid electrolytes, …

Synthesis And Raman Study Of Hollow Core-Shell Ni1.2Co0.8P@N-C As An Anode Material For Sodium-Ion Batteries, Jia-Hui Chen, Xiao-Bin Zhong, Chao He, Xiao-Xiao Wang, Qing-Chi Xu, Jian-Feng Li

Journal of Electrochemistry

With the increasing demand for large-scale energy storage, great progress has been made in discovering new advanced energy storage materials. Sodium-ion batteries (SIBs) have attracted much attention in recent years due to their use of abundant sodium resources and their comparable electrochemical capacity to lithium-ion batteries (LIBs). In this paper, we developed novel hollow core-shell Ni-Co bimetallic phosphide nanocubes with N-doped carbon coatings (Ni_1.2Co_0.8P@N-C) as the anode material for SIBs. The material was synthesized through a low-temperature phosphorization method using resorcinol formaldehyde (RF) resin coating with a Ni-Co Prussian blue analogue (PBA) as a template and …

Preparations Of Nano-MnoX/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Cyclohexane Using Intermittent Electrodeposition, Xue Zhou, Hong Wang, Zhen Yin, Yu-Jun Zhang, Jian-Xin Li

Journal of Electrochemistry

Cyclohexanone and cyclohexanol (KA oil) obtained from highly selective oxidation of cyclohexane (CHA) show important industrial value and application prospects. In this work, the intermittent electrodeposition was developed to prepare nano-MnO_x catalyst loading porous tubular titanium membrane electrode (MnO_x/Ti), which was employed to constitute an electro-catalytic membrane reactor (ECMR) for the oxidation of cyclohexane to produce cyclohexanol and cyclohexanone. The surface morphology, crystal structure and electrochemical property of the catalysts were characterized by FESEM, XRD and electrochemical workstation, respectively. The results show that the catalyst prepared by the intermittent electrodeposition displayed nano-flower-like γ-MnO₂. Compared with …

Preparation Of Α-Hydroxylated Acetal From 2-Butanone By Indirect Electrooxidation, Hai-Qing Huang, Ye Miao, Xin-Sheng Zhang

Journal of Electrochemistry

Acetoin (3-hydroxy-2-butanone) is an important food spice. As a platform compound, it is widely used in medicine, tobacco, cosmetics, chemical material and other industries. In this paper, α-hydroxylated acetal, an intermediate of acetoin, was prepared from 2-butanone by indirect electrooxidation in the plate and frame electrolytic cell, in which graphite plates were used as both an anode and a cathode, while KOH as an electrolyte and KI as a catalyst. Acetoin could be prepared by hydrolysis in acidic aqueous solution from acetoin intermediate. The effects of current density, electrolyte flow rate between the plates, 2-butanone concentration and electrolysis temperature …

The Interaction Of Ternary Components Of Ionic Liquid Gel Polymer Electrolytes For Lithium Metal Batteries, Xiao-Na Pan, Li-Lai Liu, Zhi-Pu Wang, Dan Wang, Yun Li, Pei-Xia Yang, Jin-Qiu Zhang, Mao-Zhong An

Journal of Electrochemistry

Ionically conductive gel polymer electrolyte is an excellent candidate due to its inflammable, nonvolatile and high thermal stability as compared to commercial liquid electrolytes which are usually flammable, volatile, and containing toxic organic solution as solvent, The synthesis and application of ionic gel polymer electrolytes in lithium ion/metal batteries have been previously reported. However, the interaction effects of N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13TFSI) ionic liquid (as plasticizer) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) on PVDF-HFP polymer remain unclear. In this work, the molecular structure of ionic liquid gel polymer electrolyte (ILGPE) composed of PP13TFSI, LiTFSI and PVDF-HFP was studied by Raman spectroscopy and Fourier-transform …

Electrochemical Oxidation Of Metal Chromium In Odium Hydroxide Aqueous Solution, Ping Han, Hai-Tao Feng, Ya-Ping Dong, Sen Tian, Bo Zhang, Wu Li

Journal of Electrochemistry

Ferrochrome electrolysis technology is a novel method for preparing sodium chromate (Na₂CrO₄). Although the method performs well at soft reaction conditions, controllable process, environmentally friendly production process, etc., the electrochemical oxidation process of metal chromium in NaOH aqueous electrolyte is still unclear. At present, there are few research articles about specific electrochemical oxidation of metal chromium in NaOH aqueous electrolyte. It is, therefore, meaningful to carry out the research in electrochemical oxidation mechanism of chromium. The electrochemical oxidation of metal chromium in 0.01 mol·L^-1 ~ 10 mol·L^-1 NaOH aqueous electrolytes at 20 °C was …

Ordered Mesoporous Carbon/Graphene/Nickel Foam For Flexible Dopamine Detection With Ultrahigh Sensitivity And Selectivity, Lai-Yu Wang, Xin Xi, Dong-Qing Wu, Xiong-Yu Liu, Wei Ji, Rui-Li Liu

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO₂, which is one of the important techniques to solve the global environmental problems originated from excessive CO₂ emission. In this study, a membrane electrode assembly(MEA) type CO₂ electro-reduction electrolytic cell was constucted, which enables CO₂ feeding and real-time KHCO₃ aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO₃ concentration and updating inside the liquid electrolytic chamber on CO₂ electro-reduction activity, production distribution and stability were investigated. The experimental …

Electrochemical Response Of A Single Wire-Electrode Ac Probe In 3.5wt.% Nacl, Zhen-Wen Zou, Da-Jiang Zheng, Zi-Ming Wang, Guang-Ling Song

Journal of Electrochemistry

In this paper, a recently developed single wire-electrode AC probe technology which does not need a reference or counter electrode was employed to investigate the electrochemical corrosion and sacrificial anode protection behaviors of steel and zinc in 3.5wt.% NaCl. With this simple, fast, reliable and stable probe, the instantaneous corrosion rate and accumulated corrosion loss of carbon steel in 3.5wt.% NaCl were measured, and the results revealed that both were greater than those of zinc. Furthermore, the observed different corrosion behaviors between carbon steel and zinc during the immersion could be caused by their different surface films. With the galvanic …

Stability Studies For A Membrane Electrode Assembly Type Co2 Electro-Reduction Electrolytic Cell, Qing Mao, Bing-Yu Li, Wei-Yun Jing, Jian Zhao, Song Liu, Yan-Qiang Huang, Zhao-Long Du

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO₂, which is one of the important techniques to solve the global environmental problems originated from excessive CO₂ emission. In this study, a membrane electrode assembly(MEA) type CO₂ electro-reduction electrolytic cell was constucted, which enables CO₂ feeding and real-time KHCO₃ aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO₃ concentration and updating inside the liquid electrolytic chamber on CO₂ electro-reduction activity, production distribution and stability were investigated. The experimental …

A Simple And Sensitive Aptamer-Based Electrochmical Sensor For Determination Of Aflatoxin B1, Bing Liu, Yao-Shuai Zhao, Yue Qin, Yi Wang, Yan-Jie Zhu, Shuo Wang

Journal of Electrochemistry

Aflatoxin B1 has attracted much attention because of its high toxicity and carcinogenicity, which has become a great concern in food safety. Based on the principle of specific binding between Aflatoxin B1 and its aptamer, an aptamer-based electrochemical sensor had been designed and developed for the determination of minor Aflatoxin B1 contained in grain. The mesoporous carbons were first modified on the surface of the working electrode, and then the gold nanoparticles were on-site electrodeposited at a constant potential. Each modified electrode was characteritised by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). As a result, the surface area …

Degradation Mechanism Of Lini0.83Co0.12Mn0.05O2 Cycled At 45 ℃, Hong-Yun Ma, Xiao-Hui Yao, Meng-Yao Miao, Yang Yi, Shao-Zhong Wu, Jiang Zhou

Journal of Electrochemistry

Nickel-rich layered material has been considered as the most promising one for lithium ion batteries due to its high specific capacity. To further improve the lifetime performance, it is significant to investigate the degradation mechanisms deeply. In this study, the degradation mechanism of NCM811 (LiNi_0.83Co_0.12Mn_0.05O₂) being cycled at 45^oC was systematically researched. Electrochemical impedance spectrum (EIS) results showed that the SEI resistance (R_SEI) and charge transfer resistance (R_ct) went up to 83.41% and 211.34% before and after the NCM811 material being cycled at 45^oC, …