Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 1471 - 1500 of 2388

Full-Text Articles in Physical Chemistry

Preparation Of The Protic Ionic Liquid/Pvdf-Hfp Composite Membranes And Its Performance For Dmfc, Rui-Ying Miao, Jian-Ling Li, Yong Fang, Xin-Dong Wang Feb 2009

Preparation Of The Protic Ionic Liquid/Pvdf-Hfp Composite Membranes And Its Performance For Dmfc, Rui-Ying Miao, Jian-Ling Li, Yong Fang, Xin-Dong Wang

Journal of Electrochemistry

The protic ionic liquid(PIL) α-methyl pyridinium trifluoroacetate([α-MPyH]Tfa) was synthesized by acid & alkali neutralization.Then PIL/PVDF-HFP composite membranes were prepared by means of phase inversion method using acetone as solvent.The conductivities of the composite membrane increased with the temperature and reached 8×10-3 S/cm,1×10-2 S/cm and 3×10-2 S/cm at room-temperature,30 ℃ and 80 ℃,respectively,by electrochemical impedance method.The properties of the methanol-rejecting of the membranes were measured by chronoamperometry as well.The results indicate that the properties of methanol-resistance of the membranes before and after IL combination were equivalent approximately.

Go to article

Mesoporous Carbon For High Power Supercapacitors, Bin Xu, Lu Peng, Guo-Qing Wang, Gao-Ping Cao, Feng Wu, Yu-Sheng Yang Feb 2009

Mesoporous Carbon For High Power Supercapacitors, Bin Xu, Lu Peng, Guo-Qing Wang, Gao-Ping Cao, Feng Wu, Yu-Sheng Yang

Journal of Electrochemistry

Mesoporous carbon for supercapacitors was prepared from sucrose using nano-CaCO3 as template.The microstructure of the carbon was characterized with N2 adsorption and transmission electron microscopy(TEM) observation.The electrochemical performances were evaluated in 6mol·L-1 KOH aqueous electrolyte with galvanostatic charge/discharge,cyclic voltammetry,and ac impedance spectroscopy.The sucrose-based mesoporous carbon had a surface area of 606 m2/g and enriched mesopores in the range of 10～30 nm.The mesoporous carbon presented a specific capacitance of 125 F/g at a current density of 50 mA/g and outstanding excellent rate performance.As the current density increased to 20 000 mA/g,its capacitance remained at 88 F/g,much …

Go to article

Preparation And Performance Of The Thin-Film Libpon Electrolyte, Feng Wu, Ya-Dong Liu, Ren-Jie Chen, Shi Chen Feb 2009

Preparation And Performance Of The Thin-Film Libpon Electrolyte, Feng Wu, Ya-Dong Liu, Ren-Jie Chen, Shi Chen

Journal of Electrochemistry

The LiBPON thin-film electrolyte was prepared by magnetron sputtering,and the relationship between the performance and the deposition condition was investigated.As seen in the SEM images,the thin films are dense and uniform without cracks,and according to the XRD patterns they have an amorphous structure.The electrochemical performance of the electrolyte was characterized by electrochemical impedance spectroscopy(EIS).The ionic conductivities of the thin film decreased with the RF power,but increased with the N2 pressure.The an ionic conductivity of 3.5×10-6 S/cm at room temperature was found from the electrochemical measurement.While the deposition rate increased with the RF power,but decreased with the N2 …

Go to article

Hydrothermal Preparation And Electrochemical Characterizations Of Vanadate Compound Nav2O5 Crystals, Fang Hu, Xing Ming, Fei Du, Ying-Jin Wei, Gang Chen, Chun-Zhong Wang Feb 2009

Hydrothermal Preparation And Electrochemical Characterizations Of Vanadate Compound Nav2O5 Crystals, Fang Hu, Xing Ming, Fei Du, Ying-Jin Wei, Gang Chen, Chun-Zhong Wang

Journal of Electrochemistry

The NaV2O5 was prepared by a low temperature hydrothermal process. The material crystallized in the layered orthorhombic structure with space group Pmmn. X-ray diffraction confirmed that the material was pure and the scanning electron microscopy showed that the material was composed of needle crystals with 20 μm in length and 200 nm in width. X-ray photoelectron spectroscopy indicated the co-existence of V4+ and V5+ in the material,which results in an average V4.5+ oxidation state of the material. The observed Raman bands were ascribed to different V-O vibrations. The first specific capacity about 120 mAh/g …

Go to article

Photoelectrochemical Properties Of Tio2 Nanoparticles, Jie Qu, Ying Li, Qi-Wei Jiang, Xue-Ping Gao Feb 2009

Photoelectrochemical Properties Of Tio2 Nanoparticles, Jie Qu, Ying Li, Qi-Wei Jiang, Xue-Ping Gao

Journal of Electrochemistry

The protonated titanate nanoparticles were obtained at room temperature and subsequently calcined at different temperatures(300 ℃,400 ℃,500 ℃,600 ℃ and 700 ℃) in air.The obtained products were characterized by XRD,TEM and UV-Vis.It is found that the grain sizes of TiO2 nanoparticles calcined at 300 ℃ were about 20 nm,and increased gradually with the temperature rise.Photoelectric performance was measured with I～V curve and electrochemical impedance spectroscopy(EIS).The TiO2 nanoparticles obtained at 500 ℃ showed the best photoelectrochemical properties with a photovoltaic conversion efficiency of 6.39%,which is much higher than those at other temperatures.In addition,it is also demonstrated that the charge …

Go to article

Electrooxidation Behaviors Of Tib2 As High Capacity Anodic Material In Neutral Aqueous Electrolytes, Ya-Dong Wang, Xian-Yong Guang, Zhi-Xin Wang, Xin-Ping Ai, Han-Xi Yang Feb 2009

Electrooxidation Behaviors Of Tib2 As High Capacity Anodic Material In Neutral Aqueous Electrolytes, Ya-Dong Wang, Xian-Yong Guang, Zhi-Xin Wang, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

Titanium diborides were investigated as an anodic material for neutral aqueous batteries. It is revealed that this material shows superiorly high electrochemical activities in the neutral electrolytes. The discharge capacities observed for TiB2 reached 1300 mAh/g at the constant current density of 50 mA/g, exceeding all the metal electrodes reported so far. The electrooxidation of this compound was found to proceed via the electrochemical dissolution of boron to form borofluoride, while titanium remained unchanged at the electrode. These results suggest a possible use of the boride compounds as a new material for constructing neutral aqueous batteries with high electrochemical …

Go to article

The Electrochemical Performance Of Ncf-Sulfur Cathode, Chun-Rong Zhao, Zhong-Bao Yu, Wei-Kun Wang, Yu-Sheng Yang Feb 2009

The Electrochemical Performance Of Ncf-Sulfur Cathode, Chun-Rong Zhao, Zhong-Bao Yu, Wei-Kun Wang, Yu-Sheng Yang

Journal of Electrochemistry

The electrochemical performance of NCF-sulfur cathode, with different NCF contents, was investigated by constant current discharge, cyclic voltammetry and AC impedance methods. The morphologies of the cathodes were observed using scanning electron microscopy. The results indicate that the cycle life and rate capability of NCF-sulfur cathode increased. Better performance of sulfur cathode was obtained by 3% and 5% NCF conductive addition. When the current density was 0.4 mA/cm2, the 3% NCF-sulfur cathode had an initial capacity of 880 mAh/g and a reversible capacity of 630 mAh/g after 20 cycles.

Go to article

Preparation And Characterization Of Tin-Nickel Alloy Electromagnetic Shielding Fabric, Ke-Jing Chu, Wei Wang, Bin Sun, Mei-Fang Zhu Feb 2009

Preparation And Characterization Of Tin-Nickel Alloy Electromagnetic Shielding Fabric, Ke-Jing Chu, Wei Wang, Bin Sun, Mei-Fang Zhu

Journal of Electrochemistry

A soft electromagnetic shielding fabric was successfully prepared by electroplating tin-nickel alloy on the Cu-plated PET fabric in potassium pyrophosphate system. Results show that the different tin content and different colour can be obtained by changing the ratio of metals in bath. Better corrosion resistance and anti-tarnishing were achieved with the fabric consisting of 68.96% Sn. The tin-nickel alloy surface for the electromagnetic shielding fabric had excellent conductivity, softness, permeability and soft luster, non-sensitized to the human body. Thereby it has broad prospect in EMI field and shielding clothing.

Go to article

Electrosynthesis Of 2,2-Dimethylolpropionic Acid, Hong-Yan Sun, Zhen-Hai Liang Feb 2009

Electrosynthesis Of 2,2-Dimethylolpropionic Acid, Hong-Yan Sun, Zhen-Hai Liang

Journal of Electrochemistry

The Ti/SnO2+Sb2O4/PbO2 electrode was prepared.The structure phase and valent state were characterized by means of XRD and XPS.The 2,2-dimethylolpropionic acid was synthesized on the Ti/SnO2+Sb2O4/PbO2 anode by direct electro-oxidation of 2,2-dimethylolpropionaldehyde.The product and crude material were analyzed by HPLC,the effects of the concentration of 2,2-dimethylolpropionaldehyde,pH,potential and reaction temperature were studied.The results showed that the optimum conditions were anode potential 1.8 V,pH=1,reaction temperature 15 ℃ and 2,2-dimethylolpropionaldehyde concentration 0.10mol/L.Under the optimum conditions,the selectivity of 36%,the current efficiency of 28% and the conversion of 58% were reached.The reported …

Go to article

The Electrochemical Behavior And Determination Of Carbendazim On Iron Montmorillonite Modified Electrode, Xiao-Li Jiang, Rong Li, Xiao-Ying He, Jiang Li, Ying Li Feb 2009

The Electrochemical Behavior And Determination Of Carbendazim On Iron Montmorillonite Modified Electrode, Xiao-Li Jiang, Rong Li, Xiao-Ying He, Jiang Li, Ying Li

Journal of Electrochemistry

The FeCl3 modified clay electrode was made.The electrochemical behavior of carbendazim(BCM) on the modified electrode was studied by cyclic voltammetry.The impacts of pH,scan rate and dosages of modifier were discussed and the important kinetic parameters of the electrochemical process were determined.The results indicated that the process was controlled by diffusion.The effective area of FeMM-CMC/GCE(A)=0.027 cm2,the transfer electron numbers(n)=2 and the diffusion coefficient(D)=5.115×10-6cm2/s.Under the optimized conditions,a good linearity was found between the first order derivative of peak current and concentration of BCM in the range of 2.00×10-5～8.00×10-4mol/L,with i′p=-8.045×10-7-0.0237c,correlation …

Go to article

Effect Of Irco Intermediate Layer On Electrochemical Property Of Rutisn Anode, Yan Zhao, Gui-Chang Liu, Yong-Lan Liao, Wei-Guang Ji, Shu-Jun Song Feb 2009

Effect Of Irco Intermediate Layer On Electrochemical Property Of Rutisn Anode, Yan Zhao, Gui-Chang Liu, Yong-Lan Liao, Wei-Guang Ji, Shu-Jun Song

Journal of Electrochemistry

The Ti based-RuTiSn anodes with IrCo intermediate layer were prepared by thermal decomposition method. The electrochemical properties of Ti/RuTiSn anodes with different Ir-Co intermediate layers were studied. The surface and elements compositions of the anodes were charactered by scanning electron microscopy(SEM) and electronic probe microanalysis (EPMA). The effects of intermediate layer on the electro-catalytic activity and stability were assessed by chlorine evolution potentials, accelerated lifetime test and cyclic voltammetric curves(CV). It was concluded that the anode, which contained several Ir-Co intermediate layers, could hold not only high electro-catalytic activity but also the increased stability. The enhanced life was up to …

Go to article

Synthesis,Characteristics And Electrochemical Performance Of Nano-Sized Snco/Graphite Composites As Anode For Lithium Ion Batteries, Jin-Shu Cai, Ling Huang, Fu-Sheng Ke, Shi-Gang Sun Feb 2009

Synthesis,Characteristics And Electrochemical Performance Of Nano-Sized Snco/Graphite Composites As Anode For Lithium Ion Batteries, Jin-Shu Cai, Ling Huang, Fu-Sheng Ke, Shi-Gang Sun

Journal of Electrochemistry

The nano-structural Sn-Co/graphite composites were prepared by chemical reduction of the alloy electroless deposition solution in graphite suspensions, and the composites were annealed at 500 ℃. The phase structure and surface morphology of the composites were measured by XRD, SEM and Raman. The results indicate that there were high dispersions and high loadings of Sn-Co nanoparticles on graphite by thermal treatment. Electrochemical lithium storage performance was studied preliminarily on the obtained samples. The graphite modified with the Sn-Co nanoparticles possessed a higher electrochemical reversible capacity than that of graphite during the charge and discharge process. The appetency between the Sn-Co …

Go to article

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat Jan 2009

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

Go to article

Preparation And Characterization Of Some Substituted Benzyl N-Nitrosocarbamates Containing An N-2-(Methylthio)Ethyl Or A Bis(2-Aminoethyl)Sulfide Functionality, Satya Venkata, Eric Shamo, Vladimir Benin Jan 2009

Preparation And Characterization Of Some Substituted Benzyl N-Nitrosocarbamates Containing An N-2-(Methylthio)Ethyl Or A Bis(2-Aminoethyl)Sulfide Functionality, Satya Venkata, Eric Shamo, Vladimir Benin

Chemistry Faculty Publications

The synthesis and characterization of some substituted benzyl N-nitrosocarbamates with an N-2-(methylthio)ethyl or a bis(2-aminoethyl)sulfide functionality is reported, as a part of a long-term goal to design and prepare novel photolabile structures that could be used as substances for controlled release of alkylating and/or crosslinking agents. The synthesis was accomplished by reaction of benzyl chloroformates with the corresponding amines, resulting in the preparation of carbamates. The latter were subsequently nitrosated, utilizing two different N-nitrosation methods, to yield the target structures.

Go to article

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat Jan 2009

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

Go to article

Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang Nov 2008

Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang

Journal of Electrochemistry

A PEMFC electrode consisting of dual-layer catalyst layer(CL) was fabricated in this work. The outer CL was Nafion-free,while the inner CL was Nafion-bonded. The effects of Pt/C catalyst in the outer CL that did not contact with Nafion on the current generation in PEMFC electrodes were investigated. Cyclic voltammetric studies indicated that the Pt/C catalyst in the outer CL without direct contact with Nafion was still electrochemically active in taking part in the adsorption/desorption of hydrogen and the electrochemical oxidation/reduction of the oxygen-containing species occurring at the interface of "Pt/Nafion" in the inner CL. The polarization curves showed that the …

Go to article

Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang Nov 2008

Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang

Journal of Electrochemistry

A glucose oxidative electrode(GOD),EC-Pt/CNTs glucose oxidative electrode,was constructed by ethyl cellulose(EC) and Pt/CNTs.The sensitivity of the EC-Pt/CNTs GOD is 0.85 μA/mM in the concentration range of 0～4 mmol/L of glucose.After dipped in PBS(4℃) for 18 days,the activity of the EC-Pt/CNTs GOD can reach 80%.It is promising for the EC-Pt/CNTs GOD to be used to construct glucose biosensor.

Go to article

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan Nov 2008

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS),Tafel polarization curves and scanning electron microscopy(SEM) were used to study the corrosion inhibition of AZ61 magnesium alloy in 3.5% NaCl medium with tungstate.Results showed that tungstate demonstrates strong inhibition to the corrosion of AZ61 magnesium alloy.At the concentration of 0.01 mol/L,tungstate has a high inhibition efficiency 75.5%.Tungstate is an anodic inhibitor that mainly inhibited the anodic reactions of magnesium alloy through forming a compact protective layer that covered the magnesium alloy surface active sites.

Go to article

Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang Nov 2008

Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang

Journal of Electrochemistry

The effect of the polyethylene glycol(PEG) molecular weight(MW) upon via-hole filling with diameter of 50 μm and aspect ratio of 1 in the acid copper plating solution was studied.The cathodic polarization in copper electroplating bath with PEG of different molecule weights was investigated by linear sweep voltammetry.The surface roughness,crystallography,and the resistivity of copper films were characterized by X-ray diffraction(XRD),atomic force microscopy(AFM) and the four-point probe measurements.The results showed that the polarization on the cathode and the hole-filling capability of electroplating copper bath were increased evidently with an increase of PEG molecular weight from 600 to 8000.When the PEG MW was …

Go to article

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu Nov 2008

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu

Journal of Electrochemistry

A highly-sensitive and mercury-free method of determining iodate ion in table salt was established based on carboxylic carbon nanotubes modified carbon paste electrode.In 0.1 mol/L NaOH solution,there was a sensitive cathodic stripping peak on voltammograms.The stripping peak potential was-0.52 V when accumulation time of IO-3 at the modified electrode was 60 s and the potential scan rate was 300 mV/s.There was a good liner relationship between the peak current and IO-3 concentration in the range of 8.0×10-10 ～ 5.0×10-8 mol/L and 1.0×10-7 ～ 3.0×10-6 mol/L with the correlation coefficient of 0.999 and 0.998,respectively.The detection limit was …

Go to article

The Hydrothemal Synthesis Of Nanoscale Lifepo4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong Nov 2008

The Hydrothemal Synthesis Of Nanoscale Lifepo4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The cathode materials of LiFePO4 were prepared via a hydrothermal reduction method using FeCl3 as Fe source and iron as a reducing agent.The results showed that ferric salt could be reduced to ferrous salt completely under the hydrothermal condition and pure-phase LiFePO4 was obtained based on the test results of XRD and FTIR. Carbon-coated LiFePO4 was synthesized by pyrolysisng glucose at high temperature. The morphologies of pure LiFePO4 displayed cluster-like while the LiFePO4/C displayed sphere-like particles. The electrochemical test showed that the LiFePO4/C had good rate performance,while LiFePO4 delivered much …

Go to article

Synthesis Of The Lifepo4 By Co Reduction: Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang Nov 2008

Synthesis Of The Lifepo4 By Co Reduction: Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang

Journal of Electrochemistry

LiFePO4 cathode material was synthesized by CO reducing FePO4 and LiOH precursors.The structure,morphology and electrochemical performances of such LiFePO4 material were characterized by XRD,SEM and charge-discharge tests.It was shown that the particle size of the LiFePO4 synthesized with 5% excess of LiOH in the precursor was about 200 nm.By carbon coating,the LiFePO4 electrode was able to deliver a reversible capacity of 158 mAh·g-1 at 0.1C discharge rate.Temperature-programmed X-ray diffraction was employed to monitor the reaction during the formation of LiFePO4,and Li3Fe2(PO4)3 was found to be …

Go to article

Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie Nov 2008

Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie

Journal of Electrochemistry

Effects of solution pH on the electrochemical behavior of tiron(sodium 4,5-dihydroxy-1,3-benzendisulfonic) couple(on a graphite electrode) were studied by cyclic voltammetry in aqueous solutions.It is shown that at pH<4,tiron exhibited a redox process at a relatively high potential with a good reversibility.A redox flow battery was formed employing tiron as the positive active species and V(III)/V(II) as the negative redox couple.In sulfuric acid medium,the coulombic efficiency of the tiron-V redox flow cell was more than 90% with a good cycle life.The decay in the cycle performance was minimal.Therefore,the feasibility of tiron as active materials for redox flow battery application is demonstrated.

Go to article

Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang Nov 2008

Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang

Journal of Electrochemistry

The combustion products of thermal battery used iron-heated powders have been studied.It is identified by X-ray diffraction (XRD) analysis that the main compositions of the combustion products are Fe, FeO and KCl. The transmission electron microscopy(TEM) shows a typical core-shell structure with un-reacted Fe particle core coated by FeO shell with a shell thickness of around 200 nm. The combusted iron-heated powders exhibit no metal property, which is contrast to previous assumption. Further measurement indicates that at the ambient temperature the combustion products show semiconductor property of the p-type with conductivity in the order of 103 S·cm-1, which …

Go to article

Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang Nov 2008

Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang

Journal of Electrochemistry

The Ir/C catalyst with 30%(by mass) Ir was prepared in the CH3CH2OH and H2O binary system.The X-ray diffraction(XRD) data showed that the average sizes of the Ir particles in the Ir/C catalyst was about 2.2 nm.The results of the electrochemical measurements indicated that the electrocatalytic activity of the Ir/C catalyst for the ammonia oxidation in the neutral NaClO4 solution was similar to the Ir catalyst,while electrocatalytic stability was much better than that of the Ir catalyst.Furthermore,the peak current density of the ammonia oxidation at the Ir/C catalyst electrode showed a good linear relationship …

Go to article

Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li Nov 2008

Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li

Journal of Electrochemistry

The chloroperoxidase(CPO) was immobilized onto the surface of SWNTs modified electrodes.The electrochemical behaviors of modified electrode have been investigated by cyclic voltammetry.The appearance of a pair of well-defined redox peaks in the CV curve indicated that SWNTs can promote the electron transfer reaction of CPO.The results of cyclic voltammetry in PBS of different pH,from 3~9,showed that the reaction of CPO on the modified electrode was with equal numbers of electron and protein.This readily prepared SWNTs modified electrode showed excellent stability and good catalysis to O2.

Go to article

Preparations Of Composite Electrodes Of Pt With HXWo3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li Nov 2008

Preparations Of Composite Electrodes Of Pt With HXWo3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li

Journal of Electrochemistry

Three composite electrodes of platinum with hydrogen tungsten bronze(HxWO3)were prepared by voltammetry: hydrogen tungsten bronze deposited on platinum(HxWO3/Pt);platinum deposited on hydrogen tungsten bronze(Pt/HxWO3) and codeposited platinum and hydrogen tungsten bronze(Pt-HxWO3).The eletro-catalytic activities of three electrodes toward oxygen reduction reaction were studied.It is found that the catalytic activity of platinum can be improved by introducing with hydrogen tungsten bronze.Among these composite electrodes Pt/HxWO3,and the electrode shows the best eletro-catalytic activity toward oxygen reduction reaction,hence,provides a new way for reducing loading of …

Go to article

High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao Nov 2008

High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao

Journal of Electrochemistry

The Pt/C catalyst with high dispersion and high performance was prepared successfully by an organic colloidal method and small batch production(10g) of Pt/C catalyst has been realized.The particle sizes of the active components in the catalyst could be as small as 2.8 nm and the active surface area was up to 450 m2/g.A high performance membrane-electrode assembly(MEA) with surface area of 275 cm2 has been prepared by using the home-made catalyst with a catalyst coated membrane method invented in the lab,and a 5 kW stack has been assembled.The stack showed working 10 h at room temperature,atmosphere and …

Go to article

Ceo2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang Nov 2008

Ceo2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang

Journal of Electrochemistry

In this paper,the cerium oxide(CeO2) nanoparticles were electrochemically deposited on a Pt electrode by potentiostatic deposition(psd) and potential pulse deposition(ppd) to form CeO2/Pt composite electrodes,CeO2/Pt(psd) and CeO2/Pt(ppd).The properties of the CeO2 were characterized by field emission scanning electron microscope(FESEM) and X-ray diffraction(XRD).The results showed that the CeO2 nanoparticles prepared by psd and ppd were homogeneous and dense.The methanol oxidation reaction(MOR) and oxygen reduction reaction(ORR) on the Pt electrode were enhanced with the introduction of CeO2 into Pt.In addition,the catalytic capability of the CeO2/Pt electrode can be further …

Go to article

Application Of Self-Assembly Technique In The Process Of Metallized Fabric, Yue-Hui Ma, Wei Wang, Dan Yu, Jin-Xin He Nov 2008

Application Of Self-Assembly Technique In The Process Of Metallized Fabric, Yue-Hui Ma, Wei Wang, Dan Yu, Jin-Xin He

Journal of Electrochemistry

After the pretreatment of nylon fabric by functional chitosan,the self-assembly technique was used in the process of activation before electroless plating to produce the CS-Pd membrane.The nanosized palladium particles with nanoscal have large relative surface and high catalyzed activity.Electromagnetic wave shielding fabric was prepared by electroless plating of Ni-P alloy with the activated fabric.The optimal process condition of CS finishing was given with the orthogonal and single factor experiments.The variation of fabric surface structure was characterized by SPM,SEM.Based on the Schelkunoff theory.The electromagnetic shielding effectiveness comes above 30 dB,which corresponds to shielding 96.0 percent of the electromagnetic wave or more.

Go to article

First Prev Next Last