Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Electrocatalysis (66)
- Oxygen reduction reaction (65)
- Electrodeposition (61)
- Cyclic voltammetry (58)
- Lithium ion battery (53)
-
- Supercapacitor (41)
- Corrosion (40)
- Electrochemical performance (38)
- Cathode material (35)
- Electrochemistry (33)
- Lithium-ion batteries (33)
- Fuel cell (31)
- Lithium-ion battery (29)
- Modified electrode (26)
- Electrochemical impedance spectroscopy (24)
- Carbon nanotubes (23)
- Lithium ion batteries (23)
- Anode (21)
- Anode materials (20)
- Cathode (20)
- Electrolyte (20)
- Oxygen evolution reaction (20)
- Electrocatalyst (19)
- Lithium-sulfur batteries (19)
- Fuel cells (18)
- Hydrogen evolution reaction (18)
- Anode material (17)
- EIS (17)
- Cathode materials (16)
- Electrochemical oxidation (16)
- Publication Year
- Publication
- Publication Type
Articles 1201 - 1230 of 1756
Full-Text Articles in Physical Chemistry
Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin
Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin
Journal of Electrochemistry
The nano-crystalline TiO2 electrodes were prepared by spread method,electrodeposition and sol-gel method.The experimental results show that the nano-crystalline TiO2 electrodes have special photoelectrochemical response-the photocrrent-potential curves appear peaks.The special photoelectrochemical behaviors of nano-(crystalline) TiO2 electrodes are ascribed to nano-structure as well as special light induced redox reaction mechanism of nano-crystalline semiconductor electrodes.
Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen
Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen
Journal of Electrochemistry
Nano Pt/C electrocatalysts were prepared by intermittent microwave heating method.The electrooxidation of glucose on smooth Pt and～Pt/C electrodes has been studied and compared.The results showed that the electrochemical properties on nano Pt/C were improved due to the reduction of the overpotential and the increase in the kinetic rate.The surface area would be significantly increased when the particle size of the catalyst was reduced to nano-scale,resulting in the increase in the activity.The enhancement in the resistance to poisoning could be explained that the oxygen-containing species are easier to react with poisoning species on nano Pt/C and re-active the electrode.
Effects Of Sulfide Ions On The Inhibiting Efficiency Of Eda As A Copper Corrosion Inhibitor In Dilute Hcl Solution, Wen-Juan Qu, Rong-Gui Du, Chang-Jian Lin
Effects Of Sulfide Ions On The Inhibiting Efficiency Of Eda As A Copper Corrosion Inhibitor In Dilute Hcl Solution, Wen-Juan Qu, Rong-Gui Du, Chang-Jian Lin
Journal of Electrochemistry
The anticorrosion action of EDA on copper in dilute HCl solution and the effect of sulfide ions on the inhibiting efficiency were studied by the Tafel plot method.The corrosion potential of Cu shifted to more positive value and the corrosion current density decreased after the addition of Na2S to the solution.The results indicated that sulphide ions could increase the inhibiting efficiency of EDA because of the synergistic inhibition effect between EDA and Na2S,resulting from the adsorption of HS- on the surface of Cu,facilitated the adsorption of EDA to form a highly protective adsorbed layer which …
The Complex Of Pasp And Tungstate As Inhibitors Of Cupronickel B10′S Corrosion In 3% Nacl Solution, Qun-Jie Xu, Guo-Ding Zhou, Hui-Feng Wang, Wen-Bin Cai
The Complex Of Pasp And Tungstate As Inhibitors Of Cupronickel B10′S Corrosion In 3% Nacl Solution, Qun-Jie Xu, Guo-Ding Zhou, Hui-Feng Wang, Wen-Bin Cai
Journal of Electrochemistry
AC impedance and polarization curve measurements were conducted to study the effects of environ-ment-friendly inhibitors PASP,Na2WO4 and their complexes on the corrosion of cupronickel B10 in 3%NaCl solution.The results indicate that PASP or Na2WO4 alone does inhibit the corrosion of B10,and most effectiveconcentrations are 40 mg/L and 60 mg/L for PASP and Na2WO4,respectively.With the total concentration of 40mg/L for the complex inhibitors,the optimum complex ratio of PASP to Na2WO4 was 3:1.The complex of such a combination showed a significantly synergetic inhibition effect on the corrosion of B10.
The Effect Of Solution Concentration On Properties Of Ru-Ti-Ir Oxide Anode Coatings, Ke Wang, Yan Han, Jun-Tao Wang, Xiao-Ling Zhang, Yu-Pu Sun
The Effect Of Solution Concentration On Properties Of Ru-Ti-Ir Oxide Anode Coatings, Ke Wang, Yan Han, Jun-Tao Wang, Xiao-Ling Zhang, Yu-Pu Sun
Journal of Electrochemistry
The anode coatings of Ru-Ti-Ir oxide with various solution concentrations were prepared by thermal decomposition.The scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD),accelerated life,polarization curve,cyclic voltammetry and electrochemical impedance.spectroscopy(EIS)tests were carried out.The results showed that there was an obvious effect of solution concentrations on the morphology of the coatings,but little effect on polarization of chlorine evolution.Voltammetric charges and double layer capacitances of anode coatings had a tendency to fall down firstly then increase afterwards as the solution concentration increased.
Electrochemical Reduction Behavior Of Benzaldehyde In The Ionic Liquids, Ning Zhao, Wen-Ju Dong, Qi-Zeng Shi
Electrochemical Reduction Behavior Of Benzaldehyde In The Ionic Liquids, Ning Zhao, Wen-Ju Dong, Qi-Zeng Shi
Journal of Electrochemistry
In this paper, the electrochemical reduction of benzaldehyde was investigated in C4MIMBF4, C6MIMBF4 and C8MIMBF4 ionic liquids by cyclic linear sweep voltammetry,cyclic square-wave voltammetry and chronocoulometry.Benzaldehyde exhibits two successive one-electron irreversible reduction(EP1=-1.39 V, EP2=1.69 V) with GC electrode in C4MIMBF4, the voltammetric data for benzaldehyde give diffusion coefficients of 1.5*10-8cm2/s and 1.3*108cm2/s. There is one current peak in C6MIMBF4 and C8MIMBF4 ionic liquids due to their stronger alkalinity …
Oxygen Enrichment Effect Of Ceo2 To The Cathode Performance Of Proton Exchange Membrane Fuel Cell, Xiang-Li Hou, Hong-Feng Xu, Jian-Hua Dong, Xin Sun
Oxygen Enrichment Effect Of Ceo2 To The Cathode Performance Of Proton Exchange Membrane Fuel Cell, Xiang-Li Hou, Hong-Feng Xu, Jian-Hua Dong, Xin Sun
Journal of Electrochemistry
CeO2 was added to Pt/C catalyst in the cathode of PEMFC by both sol and impregnation methods.The samples were evaluated by TEM,cyclic voltammogram techniques and proton exchange membrane fuel cell performance test.The addition of CeO2 obviously improved the performance of PEMFC and represented a notable function of oxygen enrichment in the cathode side.But with the addition of CeO2,part of the catalyst surface was covered and led to the performance drop of the PEMFC.The best content of CeO2 is 1% when it is added by impregnation method and 3% when it is added by sol method.
Effects Of Srb Biofilm And Corrosion Product Films On Corrosion Behavior Of Carbon Steel, Jing Lin, Yong-Gui Yan, Guang-Zhang Chen, Guang-Zhou Liu, Qing-Fen Li
Effects Of Srb Biofilm And Corrosion Product Films On Corrosion Behavior Of Carbon Steel, Jing Lin, Yong-Gui Yan, Guang-Zhang Chen, Guang-Zhou Liu, Qing-Fen Li
Journal of Electrochemistry
Electrochemical techniques and surface analysis techniques were applied to study corrosion characteristic of A3 steel.The effects on corrosion behavior of A3 steel by sulfate-reducing bacteria(SRB)(biotic media)and corrosion product(abiotic media)were studied.The results showed that biofilms and corrosion product films play different role during different stages.Biofilms were easier flaky with increasing of its thickness.Non-uniform biofilms reduced pitting corrosion of the specimens.The corrosion product films formed under abiotic conditions were more adherently to the surface of the metal than those formed in biogenic media.
In-Situ Detection Of The Effect Of Brighter In The Solution For Nickel And Phosphor Alloy, Jian Zheng, Ning Li, De-Yu Li, Guo-Feng Cui
In-Situ Detection Of The Effect Of Brighter In The Solution For Nickel And Phosphor Alloy, Jian Zheng, Ning Li, De-Yu Li, Guo-Feng Cui
Journal of Electrochemistry
In this work,the gold-plated mica was used for the substrate,the concentration of 5% of normal plating solution for the nickel was used as the mother solution,and the effect for the deposition by the brighter with ECSTM was in-situ detected.The solution for deposition without the brighter has no brightness,though the values of the roughness and the H_(A-V) have reduced in evidence after deposition;the solution for deposition with the complete brighter although has great brightness,the values of the roughness and the H_(A-V) have increased(after) deposition;the solution for deposition with the half brighter has a moderate effect on the H_(A-V) and (brightness).Hence,the brighter …
The High Temperature Corrosion Of 2205 Duplex Stainless Steel With Nacl Deposit, Fu-Fu Peng, Chaur-Jeng Wang, Yu-Chang Lin
The High Temperature Corrosion Of 2205 Duplex Stainless Steel With Nacl Deposit, Fu-Fu Peng, Chaur-Jeng Wang, Yu-Chang Lin
Journal of Electrochemistry
The objective of this study was to figure out the hot corrosion behavior of 2205 duplex stainless steel (2205 DSS) within the temperature ranges from 550 to 850℃ in the static air condition with 2 mg/cm2 NaCl deposit, and in the air atmosphere condition with a constant flow rate of 500 vppm NaCl(g), respectively. Experimental results show that the hot corrosion kinetics met the parabolic rate law and the corrosion rate increased constantly with increasing temperature. The scales formed included Fe2O3/Fe3O4/Cr2O3 and FeCr2O4 …
A Study Of Overcharge Characteristic Of Lithium-Ion Cells, Jing Pang, Shi-Gang Lu, Sha Liu
A Study Of Overcharge Characteristic Of Lithium-Ion Cells, Jing Pang, Shi-Gang Lu, Sha Liu
Journal of Electrochemistry
The overcharge characteristics and effect factors of lithium-ion cells containing LiMn2O4 cathodes were studied in detail. Overcharge testing of Lithium-ion cells with a systematic variation in the cell balance demonstrated that the overcharge characteristics of Lithium-ion cells was affected by the amount of cathode in the cells, which is independent of the amount of anode material. The rate of charge was found to be an important parameter, as electrolyte complete decomposition at low charge rates caused the end of overcharge testing, while high charge rates accelerated the rate of heat generation in the cells and the cell …
The Deactivation Mechanism Of Metal Oxide Anodes Under Alternative Current Electrolysis Condition, Jun-Tao Wang, Yan Han, Guang-Zhang Chen, Wen-Fa Liu
The Deactivation Mechanism Of Metal Oxide Anodes Under Alternative Current Electrolysis Condition, Jun-Tao Wang, Yan Han, Guang-Zhang Chen, Wen-Fa Liu
Journal of Electrochemistry
The metal oxide anodes coated on titanium used in seawater electrolysis were prepared by thermal decomposition. Their morphologies, compositions and phase structures were determined by scanning electron microscope(SEM), energy dispersive X-ray detector(EDX) and X-ray diffraction(XRD). The electrochemical properties of the anodes were characterized by accelerated life test, cyclic voltammetry and electrochemical impedance spectroscopy. SEM, EDX and XRD showed that solid solution structures of (Ru, Ir, Ti)O2 and (Ir, Ti)O2 were formed after pyrolysis, the solid solution structures and active components were disappeared after the deactivation of the anodes. Electrochemical results indicated that the active area decreased and the …
The Electrocatalystic Investigation Of 3,4-Dihydroxybenzoic Acid On The Modified Multiply Wall Carbon Nanotubes, Ming-Qi Li, Duo-Chang Cai, Xiao-Ying He
The Electrocatalystic Investigation Of 3,4-Dihydroxybenzoic Acid On The Modified Multiply Wall Carbon Nanotubes, Ming-Qi Li, Duo-Chang Cai, Xiao-Ying He
Journal of Electrochemistry
The electrochemical behavior of 3,4-Dihydroxybenzoic acid(DHBA) on modified multiply wall carbon nanotubes electrode was investigated by cyclic voltammetry(CV) and square wave voltammetry(SWV). Results show that in 0.1 mol/L HCl solutions the modified carbon nanotube electrode has an obvious electrocatalytic effect on the oxidation and deoxidization of DHBA. The oxidation current of DHBA is linear to it's concentration in the range of 4.0×10-6～1.0×10-4 mol/L and 2.0×10-4～8.0×10-4 1mol/L with correlation coefficient of 0.9995 and 0.9992. The detection limit is 1.0×10-6 mol/L.
Solid Oxide Fuel Cells-Materials And Prospects, Molenda Janina, Marzec Jacek
Solid Oxide Fuel Cells-Materials And Prospects, Molenda Janina, Marzec Jacek
Journal of Electrochemistry
The paper summarizes and discusses the basic properties of solid oxide fuel cell (SOFC) components (electrode materials and electrolyte) from the point of view of their essential functional parameters suck as chemicalstability, transport, catalytic and thermomechanical properties under operational conditions in a SOFC. An interrela-tion between the defect structure of these materials related to oxygen nonstoichiometry and their electronic propertiesand catalytic activity was shown. Single-chamber fuel cell concept was also presented.
The Optimal Sulfonation Conditions Of Self-Doped Polyaniline Obtained By Using Experimental Strategies, Wen-Yar Li, Chi-Chang Hu
The Optimal Sulfonation Conditions Of Self-Doped Polyaniline Obtained By Using Experimental Strategies, Wen-Yar Li, Chi-Chang Hu
Journal of Electrochemistry
The optimal sulfonation condition of self-doped sulfonated polyaniline (prepared from leucoemeraldinebase; denoted as LEB-SPANI) with a high electronic conductivity was obtained by experimental strategies, includingthe fractional factorial design (FFD) and central composite design (CCD). From the FFD experiment, the self-doped LEB-SPANI prepared at a lowtemperature (4℃), a short reaction time (1 h), and a small volume of fumingsulfuric acid (10 mL) showed a better conductivity (ca.127 mS/cm). In the CCD study coupled with a confirmationtest, the highest conductivity (ca.141 mS/cm) of the LEB-SPANI film was obtained under a sulfonation temperatureof 4℃, a sulfonation time of 75 minutes, and a volume …
A Study Of Three Corrosion Inhibitors For Reinforcing Steel In Sps Solution By Electrochemical Methods, Bing Zhao, Rong-Gui Du, Chang-Jian Lin
A Study Of Three Corrosion Inhibitors For Reinforcing Steel In Sps Solution By Electrochemical Methods, Bing Zhao, Rong-Gui Du, Chang-Jian Lin
Journal of Electrochemistry
Some electrochemical techniques such as linear polarization,electrochemical noise and EIS have been employedto study the inhibition behavior of N-lauroyl sarcosinate, β-sodium glycerophosphate and D-sodium gluconate for the reinforcing steel immersed in simulated concrete pore solution(SPS) with NaCl addition.The results show that D-sodium gluconatehas an obvious inhibitive effect for the reinforcing steelin containing Cl- SPS solution. It has been proposed that the corrosion inhibition of D-sodium gluconate is due to its competitive adsorption and precipitation on steel surface in the simulated concrete environment.
Effect Of Hco3- Concentration On Co2 Corrosion In Gas And Oil Fields, Guo-An Zhang, Min-Xu Lu, Yin-Shun Wu
Effect Of Hco3- Concentration On Co2 Corrosion In Gas And Oil Fields, Guo-An Zhang, Min-Xu Lu, Yin-Shun Wu
Journal of Electrochemistry
The effecs of HCO3- concentration on CO2 corrosion in gas and oil fields were investigated by carrying out potentiodynamic scans and weight loss tests.Potentiodynamic polarization curves showed that the cathodic current density decreased with cm increase of HCO3- concentration when HCO3- was lower than 0.042(mol/L). The cathodic reations were promoted by increasing HCO3- when it reached 0.126 mol/L, Anodic behavior was an active process at low er [HCO3-] concentration and the anodic current density decreased with the increase of [HCO3-] concentration. An evident active-passive behavior …
Copper Electrodeposition Under The Perturbation Of Hard Particles, Zeng-Wei Zhu, Di Zhu
Copper Electrodeposition Under The Perturbation Of Hard Particles, Zeng-Wei Zhu, Di Zhu
Journal of Electrochemistry
Copper electrodepositon was carried out on the rotating cathode,with hard particles(such as ceramic beads) filling between the electrodes. The rotation of cathode led hard particles to polish and impact the surface of deposit during electrodeposition.Copper deposits with a mass of cuspidal nodules were produced in acid sulfate solutions while brittle deposits without nodules were produced in alkaline sulfate solutions. It was also found that brightening and smoothing deposit could be obtained from the alkaline solution, and the deposit was approximatively disordered orientation with granular morphology of about 100~300 nm. The results show that the polishing and impact of hard particles …
Silicides And Composites Materials As Anodes For Lithium Ion Batteries, Jun-Mei Yan, Hui-Zhen Huang, Jing Zhang, Yong Yang
Silicides And Composites Materials As Anodes For Lithium Ion Batteries, Jun-Mei Yan, Hui-Zhen Huang, Jing Zhang, Yong Yang
Journal of Electrochemistry
The anode materials of Mg2Si and MnSi were synthesized by mechanically activated annealing(MAA) techniques in this work and the in electrochemical performances were also studied.A series of composite materials of Mg2Si and CNTs or CMS were prepared by ball-milling method respectively. The reversible capacities of the composites were higher than that of the pure Mg2Si and pure carbon materials.The cyclic performances have been improved greatly by ball-milling of the Mg2Si and carbon materials. Results show that ball-milling method is one kind of method to make alloy materials into practical use.
Electrochemical Disinfection Method To Treat Wastewater From Hospitals, Zhi-Fu Li, Ya-Dong Tan, Ning Xu, Shao-Hong Ren, Yu Zhao
Electrochemical Disinfection Method To Treat Wastewater From Hospitals, Zhi-Fu Li, Ya-Dong Tan, Ning Xu, Shao-Hong Ren, Yu Zhao
Journal of Electrochemistry
Electrochemical disinfection method was used to treat wastewater from hospitals. The mechanism of electrochemical disinfection was researched by using the different anode materials. The results showed that when the titanium coated with noble metal (Ru, Pt, Ir)oxide was used as an anode and stainless steel as a cathode, the current density was 6 mA/cm2, hydraulic retention time was 15 min,air flow rate was 40 L/h, the rate of anode effective area to the inner water volume was 1.0, the amount of total colibacillus was below 500 CFU/L after electrochemical disinfection,All these meet the first order of Effluent Discharge …
A Continuous Operation For Electroreduction Of Oxalic Acid To Glyoxylic Acid, Xiao-Hui Hu, Xiang-Fei Yan, Yu-Zhong Su, Jun Li, Qing-Biao Li
A Continuous Operation For Electroreduction Of Oxalic Acid To Glyoxylic Acid, Xiao-Hui Hu, Xiang-Fei Yan, Yu-Zhong Su, Jun Li, Qing-Biao Li
Journal of Electrochemistry
A simulative-continuous-operation approach was proposed to study the continuous operation for electroreduction of oxalic acid to gloxylic acid using a packed bed reactor and a parallel reactor with cooled cathode in order to solve the low productivity problem in current state by using traditional reactor. The effects of the concentration of oxalic acid and temperature on this process were also studied. Results showed that,after 30min of the reaction(residence time), the mass fraction of the produced glyoxylic acid in the catholic solution could reach 3.76% and 3.66% with respect to a saturated oxalic acid method and a step-temperature decreasing method. From …
The Mechanism Of Ethylenediamine On Electroless Ni-B Alloy Deposition, Sen-Lin Wang
The Mechanism Of Ethylenediamine On Electroless Ni-B Alloy Deposition, Sen-Lin Wang
Journal of Electrochemistry
The effects of ethylenediamine stabilizer on the deposition rate and on the stability of the plating bath for electroless deposition of Ni-B alloy were investigated. It was found that the addition of ethylenediamine greatly enhances the stability of the electroless plating bath. The electrochemical polarization including cathodic and anodic polarizations measurements were carried out to examine the effect of ethylenediamine on the deposition process. The results show that ethylenediamine affects both the cathodic and the anodic polarization processes. The oxidation current of the reducer and the reduction current of Ni-B alloy decrease greatly when ethylenediamine was added into the plating …
Electrochemical Controllable Preparation Of Hydroxyapatite Coating With Different Morphologies And Preliminary In Vitro Tests, Hai-Yan Shi, Ren Hu, Chang-Jian Lin
Electrochemical Controllable Preparation Of Hydroxyapatite Coating With Different Morphologies And Preliminary In Vitro Tests, Hai-Yan Shi, Ren Hu, Chang-Jian Lin
Journal of Electrochemistry
The Controllable electrochemical deposition has been developed to prepare the hydroxyapatite(HA) coatings on Ti substrate with different morphologies and structures. Three kinds of typical topography of HA coatings, i.e. standing-up, flower and ordered porous structures have been obtained. The XRD and FTIR results demonstrate high crystallinity of the coating and exclusion of other forms of calcium phosphates. In vitro tests reveal that the biological property is largely dependent on the structure and morphology of the HA coating. It has been found that all pure HA coating show good biocompatibilities, while only the HA coating with ordered porous structures exhibits best …
Electrochemical Oxidation Of Organic Additives In Tin Plating Electrolytes, Yin-Mei Cheng, Lan-Kun Cai, Qiang Song
Electrochemical Oxidation Of Organic Additives In Tin Plating Electrolytes, Yin-Mei Cheng, Lan-Kun Cai, Qiang Song
Journal of Electrochemistry
Cyclic voltammetry(CV) was used to characterize the voltammetric behaviours of organic additives, e.g. PSA(phenolsulfonic acid) EN(ethoxylatedα-naphthol) and ENSA(ethoxylatedα-naphthol sulfonic acid), on the anode surface. In PSA solutions, an anodic peak was obtained and the peak potential was about 1.2V. In EN and ENSA solutions, two anodic peaks were obtained and the peak potentials were about(0.95V) and 1.3V. The products of galvanostatic electrolysis were separated by HPLC(high performance liquid chromatography) and analyzed by EI/MS(electron ionizing mass spectrometry). The mechnism of the electrochemical oxidation was also disussed.
Nafion Emulsion Method For Fuel Cell Membrane-Electrode-Assembly Preparation, Chao-Yang Xia, Lin Zhuang, Jun-Tao Lu
Nafion Emulsion Method For Fuel Cell Membrane-Electrode-Assembly Preparation, Chao-Yang Xia, Lin Zhuang, Jun-Tao Lu
Journal of Electrochemistry
A Nafion emulsion method for fuel cell membrane-electrode-assembly (MEA) preparation was reported for the first time in this paper. 5 %(by mass) Nafion alcohol solution and non-polar solvent (e.g., cyclohexane) were ultrasonicallymixed to produce Nafion emulsion. The catalyst ink prepared using the thus-obtained Nafion emulsion can be directly cast onto Nafion membrane to make MEA. This method is simple in operation, and effectively preventsthe Nafion membrane swelling, hence is suitable for large-scale application. The MEA thus-prepared showed comparable catalyst efficiencywith respect to the popular transfer-method, and the preliminary performance in room-temperature H2/O2 fuel cell test was satisfying.
Surface And Sructure Investigations Of Membrane Electrode Assembly In Dmfc Lifetime Testing, Xuan Cheng, Cheng Peng, Meng-Di You, Jing Liu, Ying Zhang
Surface And Sructure Investigations Of Membrane Electrode Assembly In Dmfc Lifetime Testing, Xuan Cheng, Cheng Peng, Meng-Di You, Jing Liu, Ying Zhang
Journal of Electrochemistry
The lifetime and performance of a direct methanol fuel cell (DMFC) were investigatedto understand the correlation between thestructure of catalysts/membrane and cell performanceversus time. The cell polarization and performance curves were obtained during the DMFC operation with the time. The catalysts and Nafion membrane of the membrane electrode assembly (MEA) from the lifetime test were comprehensively examined by XRD, HRTEM, FTIR and Raman spectroscope techniques. The results revealed that there was significant performance degradation during the first 200 hours operation; while the degradation was slowing down between 200 and 704 hours operation. The degradation became worse after 1002 h operation. …
Adsorption Of Polyaspartic Acid From Sulphur Acid Solution On Carbon Steel And Its Corrosion Inhibition, Rong-Jing Cui, Ning Gu, Chun-Mei Li
Adsorption Of Polyaspartic Acid From Sulphur Acid Solution On Carbon Steel And Its Corrosion Inhibition, Rong-Jing Cui, Ning Gu, Chun-Mei Li
Journal of Electrochemistry
The role of Polyaspartic acid in the corrosion inhibition of 45# carbon steel in sulphuric acid solution has been investigated by polarization curve andelectrochemical impedance spectroscopy (EIS). The influences of the concentration and the temperature of PASP on the corrosion inhibition efficiency were determined. The results indicated that the PASP as the corrosion inhibitor mainly inhibitated the anode; within the experiment temperature, the inhibitor efficiency decreased with the raising of the temperature and PASP had a good inhibiting performance at 10℃, the corrosion inhibition efficiency of PASP for carbon steel increased with the increase of the concentration of PASP when …
Effect Of Chloride Ions On The Corrosion Behavior Of Reinforcing Steel In Simulated Concrete Pore Solutions, Yu Liu, Rong-Gui Du, Chang-Jian Lin
Effect Of Chloride Ions On The Corrosion Behavior Of Reinforcing Steel In Simulated Concrete Pore Solutions, Yu Liu, Rong-Gui Du, Chang-Jian Lin
Journal of Electrochemistry
The potentiodynamic anodic polarization was used to study the corrosion behavior of the reinforcing steel in simulated concrete pore solutions with different pH and chloride ion concentrations. The effect of chloride ions on passivity breakdown of the steel was examined by measuring the breaking potentials of reinforcing steel, and the critical chloride concentrations for depassivation were found in simulated concrete pore solutions at pH 12.50 and pH 12.00.
Research Progresses In A Flow Redox Battery, Quan-Feng Dong, Hua-Min Zhang, Ming-Gang Jin, Ming-Sen Zheng, Ya-Ding Zhan, Shi-Gang Sun, Zu-Geng Lin
Research Progresses In A Flow Redox Battery, Quan-Feng Dong, Hua-Min Zhang, Ming-Gang Jin, Ming-Sen Zheng, Ya-Ding Zhan, Shi-Gang Sun, Zu-Geng Lin
Journal of Electrochemistry
As a large scale electrochemical storage device, flow redox battery in which the active materials are flowing electrolytes is different from the common batteries employing solid or gas materials as an electrode. In this paper we introduced flow redox battery in brief, reviewed its development and actual state on (study). The main problem existed in the new device was discussed when viewed with its future developments.
Effects Of Aluminide And Platinum-Aluminide Coatings On The Hot Corrosion Behavior Of Mar-M247 Nickel-Based Superalloy, I.K. Lee, W.T. Tasi, J.T. Lee
Effects Of Aluminide And Platinum-Aluminide Coatings On The Hot Corrosion Behavior Of Mar-M247 Nickel-Based Superalloy, I.K. Lee, W.T. Tasi, J.T. Lee
Journal of Electrochemistry
This study is to investigate the high temperature hot corrosion behavior of aluminide coating and platinum-aluminide coating on Ni-base superalloy MAR-M247. On the platinum-aluminide, aluminide and the base metal, respectively, by the salt spraying method. The resistances to hot corrosion of platinum-aluminide coating, aluminide coating and the base metal were evaluated by the variations of weight gains. Aluminide and platinum-aluminide coating showed significanty beneficial effect on inhibiting the hot corrosion of MAR-M247. But that of the platinum-aluminide coating was even much better. The aluminide coating surface was composed of β-NiAl, and that of the platinum-aluminide coating was PtAl2. …