Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 391 - 420 of 2272

Full-Text Articles in Physical Chemistry

Energy Renewal: Isothermal Utilization Of Environmental Heat Energy With Asymmetric Structures, James Weifu Lee Jan 2021

Energy Renewal: Isothermal Utilization Of Environmental Heat Energy With Asymmetric Structures, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

Through the research presented herein, it is quite clear that there are two thermodynamically distinct types (A and B) of energetic processes naturally occurring on Earth. Type A, such as glycolysis and the tricarboxylic acid cycle, apparently follows the second law well; Type B, as exemplified by the thermotrophic function with transmembrane electrostatically localized protons presented here, does not necessarily have to be constrained by the second law, owing to its special asymmetric function. This study now, for the first time, numerically shows that transmembrane electrostatic proton localization (Type-B process) represents a negative entropy event with a local protonic entropy …

Go to article

Relating Detonation Parameters To The Detonation Synthesis Of Nanomaterials, Martin Langenderfer Jan 2021

Relating Detonation Parameters To The Detonation Synthesis Of Nanomaterials, Martin Langenderfer

Doctoral Dissertations

“This research investigates the physical and chemical processes that contribute to the detonation synthesis of silicon carbide nanoparticles. Bulk production of SiC nanoparticles through detonation is possible due to pressures achieved over 20 GPa and temperatures over 2000 K as well as quenching rates in excess of 13 billion K/second. These conditions catalyze reaction and bottom-up molecular growth while retaining particles < 100 nm in diameter. In this work, detonation synthesis of SiC was demonstrated by incorporation of polycarbosilane, an SiC precursor material, into an RDX/TNT explosive matrix prior to detonation. Detonation Synthesis of SiC was also accomplished by reacting elemental silicon with carbon liberated by the detonation of negatively oxygen balanced TNT. Hydrodynamic simulation of a 60:40 mass ratio RDX/TNT detonation created conditions thermodynamically suitable to produce cubic silicon carbide within the first 500 nanoseconds after the passage of the detonation wave while carbon remains chemically reactive for molecular formation. Simulations and experimental tests indicated that loading configuration and impedance mismatch of the precursor additives used in detonation synthesis results in conditions in the additives that exceed the accepted detonation pressure of the explosive by greater than three times. Finally, a full factorial experimental design showed increasing silicon concentration, reducing silicon size, and reducing oxygen balance by adjusting the ratio of RDX to TNT decreased the explosives detonation pressure by 20% and increased the soot yield and concentration of SiC observed in the detonation products by 82% and 442% respectively”--Abstract, page iv.

Go to article

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song Dec 2020

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song

Journal of Electrochemistry

Water electrolysis for hydrogen production is beneficial for solving the problem of energy crisis and environmental issues. It is necessary to study highly active and cost-effective catalysts toward hydrogen evolution reaction (HER) to reduce the consumption of noble metals. Herein, we report the synthesis of core-shell structured Ru@Pt0.24Ru nanoflowers electrocatalyst by stepwise reduction of Ru and Pt precursors in the mixture of oleylamine and benzyl alcohol at 160 oC. The average diameter of the resultant Ru@Pt0.24Ru was 16.5±4.0 nm with a bulk atomic ratio between Pt and Ru of 0.24:1 and a surface ratio of …

Go to article

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan Dec 2020

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a high-efficient clean conversion device for future energy management. Because of the low antioxidant reduction ability and complex thermal stress, the structure of traditional asymmetrical thin anode-supported planar SOFC is easily to be broken under stack operating conditions. To overcome these defects, a new complete symmetrical SOFC based on double-sided cathodes was developed. To study the influences of gas flow direction and current collection mode on the cell performance inside stack, a numerical model was established by finite element method based on the theory of electro-thermo-chemo multiphysical coupling. By applying this model, the molar …

Go to article

Effect Of 18-Crown-6 Additive On Chromium Electrodeposition In Ionic Liquid, Yi-Jie Wang, Dong-Fang Niu, Xin-Sheng Zhang Dec 2020

Effect Of 18-Crown-6 Additive On Chromium Electrodeposition In Ionic Liquid, Yi-Jie Wang, Dong-Fang Niu, Xin-Sheng Zhang

Journal of Electrochemistry

Trivalent chromium ion (Cr3+) is used for electrodeposition due to its low toxicity. Electrodeposition in ionic liquids can greatly solve for hydrogen evolution problem. However,as a widely used Cr(III) precursor, chromium chloride hydrate (CrCl3·6H2O), still contains water. In the presence of water, Cr3+ will form a complex coordination structure with water molecules ([Cr(H2O)6]3+), which is a stable octahedral structure and is difficult to be directly reduced to chromium metal. Therefore, coordination agents should be added into the bath. In this work, the effect of 18-Crown-6 additive on …

Go to article

Degradation And Thermal Characteristics Of Lini0.8Co0.15Al0.05O2/Graphite Lithium Ion Battery After Different State Of Charge Ranges Cycling, Cun Wang, Wei-Jiang Zhang, Teng-Fei He, Bo Lei, You-Jie Shi, Yao-Dong Zheng, Wei-Lin Luo, Fang-Ming Jiang Dec 2020

Degradation And Thermal Characteristics Of Lini0.8Co0.15Al0.05O2/Graphite Lithium Ion Battery After Different State Of Charge Ranges Cycling, Cun Wang, Wei-Jiang Zhang, Teng-Fei He, Bo Lei, You-Jie Shi, Yao-Dong Zheng, Wei-Lin Luo, Fang-Ming Jiang

Journal of Electrochemistry

The LiNi0.8Co0.15Al0.05O2 (NCA) cathode exhibits high energy density and large reversible capacity, which plays an essential role in the field of electric vehicles (EVs). However, low capacity retention and poor thermal stability limit its application. Few literatures are found for the capacity degradation mechanism of NCA/graphite batteries at home and abroad. The different state of charge (SOC) ranges cycle degradation behaviors of 18650-type NCA/graphite (2.4 Ah) battery were studied in this paper. The SOC ranges considered were 0% ~ 20% (low), 20% ~ 70% (medium), 70% ~ 100% (high), and 0% ~ 100% …

Go to article

Preparations And Sodium Storage Properties Of Ni3S2@Cnt Composite, Ming-Tao Duan, Yan-Shuang Meng, Hong-Shuai Zhang Dec 2020

Preparations And Sodium Storage Properties Of Ni3S2@Cnt Composite, Ming-Tao Duan, Yan-Shuang Meng, Hong-Shuai Zhang

Journal of Electrochemistry

Transition metal sulfides (TMSs)-based electrode materials with highly reversible sodium storage have attracted extensive attentions as one of the most prospective electrode materials for sodium ion batteries (SIBs). However, low cycling stability and rate property caused by large volume expansion and poor electronic conductivity during the electrochemical reaction still hamper their further practical application. In this work, in-situ encapsulated Ni3S2 nanoparticles in carbon nanotubes (Ni3S2@CNT) have been successfully fabricated as an anode material for high-performance SIBs by a one-step solid-phase calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), …

Go to article

Effect Of Stereotaxically-Constructed Graphene On The Negative Electrode Performance Of Lead-Acid Batteries, Pin-Song Chen, Yi-Tao Hu, Xin-Yi Zhang, Pei-Kang Shen Dec 2020

Effect Of Stereotaxically-Constructed Graphene On The Negative Electrode Performance Of Lead-Acid Batteries, Pin-Song Chen, Yi-Tao Hu, Xin-Yi Zhang, Pei-Kang Shen

Journal of Electrochemistry

With the advantages of high ratio surface area, excellent conductivity and high stability, the stereotaxically-constructed graphene (SCG) material was added to the negative active material (NAM) of lead-acid battery for improving battery performance. XRD, SEM and cyclic voltammetry tests were carried out to analyze the influence of SCG on negative active material. It is found that the conversion efficiency of lead sulfate to lead in the negative active material added with SCG material was higher than that of control group, and the particle size of the lead sulfate obtained after the discharge reaction was smaller, which are favorable factors for …

Go to article

Preparations And Photoelectrochemical Performances Of Rgo-Tio2 Nanotubes Arrays, Ze-Yang Zhang, Lan Sun, Chang-Jian Lin Dec 2020

Preparations And Photoelectrochemical Performances Of Rgo-Tio2 Nanotubes Arrays, Ze-Yang Zhang, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Decorating TiO2 nanotube arrays with RGO to improve the photocatalytic activity of TiO2 nanotube arrays has been reported. For the reported RGO-TiO2 nanotube arrays, TiO2 nanotube arrays were prepared by anodizing the high-purity Ti foil in an organic electrolyte for multiple-step treatments, while RGO were deposited on TiO2 nanotube arrays by using cyclic voltammetry or other electrical reduction methods. To enhance the reduction degree and the coverage of RGO on the resultant RGO-TiO2 nanotube arrays, in this work, the one-step electrochemical anodization in hydrofluoric acid was used to fabricate TiO2 nanotube arrays with …

Go to article

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun Dec 2020

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun

Journal of Electrochemistry

Electrochemical conversion of carbon dioxide (CO2) driven by renewable electricity that can meet both carbon emission reduction and renewable energy utilization has been rapidly developed in recent years. Copper (Cu) catalyst has long been a promising candidate for CO2 electroreduction applications because of its natural abundance and specific capability of producing a substantial amount of C2 products. However, various metallic Cu electrodes reported have been significantly influenced by the adsorption of certain cation/anion ions, resulting in wide-span catalytic activities and selectivity for various products. In addition, a recent report demonstrated that by virtue of gas-diffusion flow cell …

Go to article

Preparation And Process Optimization Of Cathode Materials For Lithium-Sulfur Batteries, Kai Wu Dec 2020

Preparation And Process Optimization Of Cathode Materials For Lithium-Sulfur Batteries, Kai Wu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries represent promising candidates for next-generation energy storage system due to their high energy density and low material cost. However, the industrial application of Li-S batteries remains challenges because of the shuttle effect from lithium polysulfides and the lack of facial routes for Li-S battery preparation. To solve these problems, a cathode consisting of different commercial carbon materials, namely, acetylene black (SP), Ketjen Black (KB) and carbon nanotube (CNT), with sulfur (S) is prepared separately for Li-S battery. After the process of 8-h ball milling for KB/S composite, together with the polyvinyl pyrrolidone (PVP) binder, the cathode could …

Go to article

Novel Electrochemical Sensor Based On Integration Of Nanoporous Gold With Molecularly Imprinted Polymer For Detection Of Arsenic Ion(Iii), Wu-Wei Ma, Qi-Gang Chang, Xiong-Fang Shi, Yan-Bin Tong, Li Zhou, Bang-Ce Ye, Jian-Jiang Lu, Jin-Hu Zhao Dec 2020

Novel Electrochemical Sensor Based On Integration Of Nanoporous Gold With Molecularly Imprinted Polymer For Detection Of Arsenic Ion(Iii), Wu-Wei Ma, Qi-Gang Chang, Xiong-Fang Shi, Yan-Bin Tong, Li Zhou, Bang-Ce Ye, Jian-Jiang Lu, Jin-Hu Zhao

Journal of Electrochemistry

Arsenic, a toxic chemical element, is detrimental to environment and human health in particular. Therefore, the development of simple, fast, and accurate arsenic ion (As3+) detection methods has attracted extensive attention. In this work, an electrochemical sensor based on molecular imprinted polymer (MIP) and nano-porous gold (NPG) modified indium tin oxide (ITO) electrode (MIP/NPG/ITO) was developed for determination of As3+ in water with different quality. NPG with high conductivity, large specific surface area and high biocompatibility was prepared in situ on ITO surface by a green electrodeposition method using simple and controllable steps. Then, a layer of …

Go to article

Synergistic Effect Of Dissolving O2 And Wavelength On The Photo-Assisted Anodic Deposition Of Ceo2 Thin Films, Tong-Zheng Jin, Yu-Meng Yang, Sheng-Hui Fan, Guo-Ying Wei, Zhao Zhang Dec 2020

Synergistic Effect Of Dissolving O2 And Wavelength On The Photo-Assisted Anodic Deposition Of Ceo2 Thin Films, Tong-Zheng Jin, Yu-Meng Yang, Sheng-Hui Fan, Guo-Ying Wei, Zhao Zhang

Journal of Electrochemistry

Cerium dioxide (CeO2) thin films have been applied as new material in many technical fields such as solid oxide fuel cells, catalysts, UV absorbents, pharmacology, and coatings for corrosion protection of many metals and alloys. Electrodeposition is widely considered to be one of the best preparation methods for CeO2 film. In this work, the CeO2 films were prepared by photo-assisted anodic deposition in the bath solutions containing 0.05 mol·L-1 cerium (III) nitrate, 0.1 mol·L-1 ammonia acetate and 70% (V/V) ethanol onto 316L stainless steel (SS) surface. The synergistic effects of …

Go to article

Preparations And Properties Of Low Cost Sulfide Solid Electrolytes Li6-XPs5-XClX, Na-Chuan Yang, Yu Wang, Yi Shuai, Kang-Hua Chen Dec 2020

Preparations And Properties Of Low Cost Sulfide Solid Electrolytes Li6-XPs5-XClX, Na-Chuan Yang, Yu Wang, Yi Shuai, Kang-Hua Chen

Journal of Electrochemistry

With the shortage of energy and environmental pollution, the storage of electric energy is getting more attention all over the world. In order to improve the energy density and safety performance of batteries, uses of solid electrolyte become more and more popular. However, because the conductivity of solid electrolyte is not comparable to that of liquid electrolyte, the solid electrolyte application has certain limitations. With the efforts of researchers from various countries, there are several different solid electrolytes having better conductivity, for instance, sulfide solid electrolyte and oxide solid electrolyte. Sulfide solid electrolyte is a highly promising solid electrolyte material …

Go to article

Pitting Behaviors Of Passivated And Trans-Passivated 304 Stainless Steel, Jing Shen, Zi-Ming Wang, Da-Jiang Zheng, Guang-Ling Song Dec 2020

Pitting Behaviors Of Passivated And Trans-Passivated 304 Stainless Steel, Jing Shen, Zi-Ming Wang, Da-Jiang Zheng, Guang-Ling Song

Journal of Electrochemistry

In order to further understand the passivation and trans-passivation behaviors of 304 stainless steels, the samples were pretreated under different polarization potentials and their corrosion behaviors were investigated. It was found that the pitting potential of the untreated sample was the same as that of the sample treated with 1.1 V trans-passivation potential, while the pitting potential of the sample treated with 0.5 V passivation treatment was the highest. This observation was further verified by the SKP results. According to SEM observations, the surface of the untreated sample preserved a polishing morphology, while the surface of the 0.5 V passivation …

Go to article

Step-By-Step Modification Of Graphite Felt Electrode For Vanadium Redox Flow Battery, Jing-Yuan Lou, Dong-Jiang You, Xue-Jing Li Dec 2020

Step-By-Step Modification Of Graphite Felt Electrode For Vanadium Redox Flow Battery, Jing-Yuan Lou, Dong-Jiang You, Xue-Jing Li

Journal of Electrochemistry

As a well-known electrode material of the vanadium redox flow battery (VRFB),graphite felt electrode is the frequently-used electrode material in VRFB, and its low electrochemical activity is one of the key factors for the low power density of VRFB. In this work, we proposed a step-by-step modification method, which used KMnO4 to oxidize graphite felt first and then placed in an activation solution to excite its reactivity, to improve the electrochemical performance of the graphite felt electrode. According to the results from cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) characterizations …

Go to article

Understanding The Role Of Atom Trapping In The Evolution Of Hydrocarbon Transformation Catalyst Morphology, Griffin Alexander Canning Dec 2020

Understanding The Role Of Atom Trapping In The Evolution Of Hydrocarbon Transformation Catalyst Morphology, Griffin Alexander Canning

Chemistry and Chemical Biology ETDs

Converting alkanes to other, more chemically and economically valuable molecules requires catalysts that can survive elevated temperatures and highly reducing environments. These environments can cause many metal-nanoparticle based catalysts to sinter rapidly, causing a loss of activity. They must also tolerate the coke formation, as well, since coke can restrict access to active sites by gas phase molecules, thus lowering catalytic activity. While there are routes to improve both the sinter and coke resistance of catalysts, an alternative strategy is to develop a protocol for regenerating the activity of the catalyst in question when coke formation or sintering becomes problematic. …

Go to article

Developments Of Machine Learning Potentials For Atomistic Simulations, Howard Yanxon Dec 2020

Developments Of Machine Learning Potentials For Atomistic Simulations, Howard Yanxon

UNLV Theses, Dissertations, Professional Papers, and Capstones

Atomistic modeling methods such as molecular dynamics play important roles in investigating time-dependent physical and chemical processes at the microscopic level. In the simulations, energy and forces, sometimes including stress tensor, need to be recalculated iteratively as the atomic configuration evolves. Consequently, atomistic simulations crucially depend on the accuracy of the underlying potential energy surface. Modern quantum mechanical modeling based on density functional theory can consistently generate an accurate description of the potential energy surface. In most cases, molecular dynamics simulations based on density functional theory suffer from highly demanding computational costs. On the other hand, atomistic simulations based on …

Go to article

Radial Basis Densities And The Density Functional-Based Atom-In-Molecule: Designing Charge-Transfer Potentials, Godwin Amo-Kwao Nov 2020

Radial Basis Densities And The Density Functional-Based Atom-In-Molecule: Designing Charge-Transfer Potentials, Godwin Amo-Kwao

Nanoscience and Microsystems ETDs

Classical potentials that are capable of describing charge transfer and charge polarization in complex systems are of central importance for classical atomistic simulation of biomolecules and materials. Current potentials—regardless of the system—do not generalize well, and, with the exception of highly-specialized empirical potentials tuned for specific systems, cannot describe chemical bond formation and breaking. The charge-transfer embedded atom method (CT-EAM), a formal, DFT-based extension to the original EAM for metals, has been developed to address these issues by modeling charge distortion and charge transfer in interacting systems using pseudoatom building blocks instead of the electron densities of isolated atoms. CT-EAM …

Go to article

New Metal Based Saturable Absorber For Ultrashort Pulse Generation, Muhammad Taufiq Ahmad Nov 2020

New Metal Based Saturable Absorber For Ultrashort Pulse Generation, Muhammad Taufiq Ahmad

Student Works (2020-2029)

Cost-efficient, robust and flexible laser systems are vital for a wide-range of applications ranging from high-precision material processing to biomedicine. This thesis aims to explore pure silver and gold based saturable absorbers (SAs) as Q-switcher and mode-locker in various fibre laser cavities. The generations of Q-switched pulses in 1-,1.55-, and 2-micron regions have been successfully demonstrated using a pure gold, which was deposited using electron beam deposition onto a PVA thin-film as SA. For instance, a stable Q-switched thulium-doped fibre laser (TDFL) operating at 1949 nm was successfully demonstrated with the gold SA. The proposed laser generates Q switched pulses …

Go to article

Adsorption And Reconfiguration Of Amphiphiles At Silica-Water Interfaces: Role Of Electrostatic Interactions, Van Der Waals Forces And Hydrogen Bonds, Yao Wu Nov 2020

Adsorption And Reconfiguration Of Amphiphiles At Silica-Water Interfaces: Role Of Electrostatic Interactions, Van Der Waals Forces And Hydrogen Bonds, Yao Wu

LSU Doctoral Dissertations

The ability to explore and predict metastable structures of hybrid self-assemblies is of central importance for the next generation of advanced materials with novel properties. As compared to their thermodynamically stable forms, the kinetically stabilized materials show improved functionality potentially over their stable counterparts. The self-assembly processes usually originate from weak intermolecular interactions, involving a dynamic competition between attractive and repulsive interactions. These weak forces, including van der Waals (vdW), electrostatic interaction and the hydrogen bonding (H-bonding), can be tuned by external stimuli, e.g., confinement, temperature and ionization, and consequently driving hybrid materials into different configurations. It is challenging to …

Go to article

Cycling Performance And Solid-Electrolyte-Interphase Synergic Formation Of Silicon Nanoparticles In The Concentrated Electrolyte With Additives, Zeng-Hua Chang, Fu-Juan Han, Xi-Xin Yang, Jian-Tao Wang, Shi-Gang Lu Oct 2020

Cycling Performance And Solid-Electrolyte-Interphase Synergic Formation Of Silicon Nanoparticles In The Concentrated Electrolyte With Additives, Zeng-Hua Chang, Fu-Juan Han, Xi-Xin Yang, Jian-Tao Wang, Shi-Gang Lu

Journal of Electrochemistry

In this paper, the effects of additives on the cycling performance of silicon nanoparticles in LiFSI-(PC)3 based concentrated electrolytes were systematically studied. The structures of silicon nanoparticle electrodes and the evolution of solid-electrolyte-interphase were characterized by scanning electron microscopy (SEM), attenuated total reflection Flourier transformed infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The results indicated that the additives can efficiently improve the cycling performance of silicon nanoparticle electrodes. In LiFSI-(PC)3 concentrated electrolyte, the capacity became 574.8 mAh·g-1 after 300 cycles with the initial capacity of 3296.1 mAh·g-1. In contrast, the 3% LiDFOB, 3% FEC …

Go to article

Facile Synthesis Of Nitrogen-Doped Graphene-Like Active Carbon Materials For High Performance Lithium-Sulfur Battery, Quan-Hua Meng, Wen-Wen Deng, Chang-Ming Li Oct 2020

Facile Synthesis Of Nitrogen-Doped Graphene-Like Active Carbon Materials For High Performance Lithium-Sulfur Battery, Quan-Hua Meng, Wen-Wen Deng, Chang-Ming Li

Journal of Electrochemistry

Lithium-sulphur (Li-S) battery is regarded as a promising energy storage device because of its high theoretical capacity. However, the low S utilization and short cycling life limit the commercial applications. In this work, nitrogen-doped graphene-like carbon (NGC) materials were synthesized by simply pyrolyzing and carbonizing the mixture of melamine (C3H6N6) and L-cysteine (C3H7NO2S). The graphene-like structure in NGC effectively buffered the volume change of S during the discharge/charge process and improved the cycling stability. Meanwhile, nitrogen-containing functional groups in NGC facilitated the transportation of ions and suppressed the …

Go to article

Highly Efficient Co2 Utilization Via Molten Salt Co2 Capture And Electrochemical Transformation Technology, Bo-Wen Deng, Hua-Yi Yin, Di-Hua Wang Oct 2020

Highly Efficient Co2 Utilization Via Molten Salt Co2 Capture And Electrochemical Transformation Technology, Bo-Wen Deng, Hua-Yi Yin, Di-Hua Wang

Journal of Electrochemistry

The molten electrolytes exhibit high CO2 absorption capacities, wide electrochemical windows and excellent reaction kinetics, which are promising electrolyte candidates for efficient capture and electrochemical conversion of high-flux CO2 driven by renewable and clean electricity sources. This short review introduces the recent advancements of CO2 electroreduction achieved by the authors using molten salt CO2 capture and electrochemical transformation (MSCC-ET) technology, involving CO2 absorption kinetics, cathodic kinetics, controllable synthesis of carbon products with unique nanostructures, development of inert oxygen evolution anodes and CO2 conversion efficiency as well as energy efficiency. The challenges and prospects are …

Go to article

Electrochemical Engineering Of Carbon Nanodots, Lei Bao, Dai-Wen Pang Oct 2020

Electrochemical Engineering Of Carbon Nanodots, Lei Bao, Dai-Wen Pang

Journal of Electrochemistry

Aqueous batteries have been considered to be a competitive candidate for large-scale energy storage. However, most of aqueous batteries adopt inorganic electrode materials with metallic elements, which are based on the reversible insertion of metal ions, making their application being highly hindered by limited cycle life, environmental issue, high cost and low reserves. On the other hand, organic electrode materials offer the advantages of abundant reserves, tunable structures, renewability and environmental benignity. Furthermore, the wide internal space enables these organics to flexibly store various charge carriers. Organics have been investigated as the alternative to inorganic electrode materials. Herein, we review …

Go to article

Research Progress Of Sulfur Cathode Catalytic Conversions For Lithium-Sulfur Batteries, Qin-Jun Shao, Jian Chen Oct 2020

Research Progress Of Sulfur Cathode Catalytic Conversions For Lithium-Sulfur Batteries, Qin-Jun Shao, Jian Chen

Journal of Electrochemistry

The electrochemical reduction of sulfur (S) takes place through multistep reactions when S is used as a cathode material. The complete discharge of S to form final product lithium sulfide (Li2S) is a two-electron reaction. The formation of low-order lithium polysulfides (LiPS) needs to overcome certain energy barriers. And the reduction of Li2S2 to Li2S is the rate-limited step. The reaction kinetic of sulfur cathode is the critical key to determine the electrochemical performance of Li-S batteries, such as specific energy, specific power and low temperature performance, etc. Accelerating the rate-limited step kinetics …

Go to article

Liquid Metal Electrodes For Electrochemical Energy Storage Technologies, Hao-Miao Li, Hao Zhou, Kang-Li Wang, Kai Jiang Oct 2020

Liquid Metal Electrodes For Electrochemical Energy Storage Technologies, Hao-Miao Li, Hao Zhou, Kang-Li Wang, Kai Jiang

Journal of Electrochemistry

Electrochemical energy storage technologies (ESTs) with low cost, long lifespan and high safety are of great importance for efficient integration of renewable energy into the grid. Liquid metal electrodes (LMEs) possessing the merits of high electronic conductivity, easy manufacture and amorphous structure is of great application value in the field of energy storage batteries. During charge-discharge processing, the LMEs could avoid the issues of structural deformation and dendrite growth in solid metal electrodes, which could effectively extend the cycle life of the LME based batteries. Moreover, LME based batteries are easy to be scaled up and less expensive, which are …

Go to article

A Model For The Anodic Carbonization Of Alkaline Polymer Electrolyte Fuel Cells, Qi-Hao Li, Ying-Ming Wang, Hua-Long Ma, Li Xiao, Gong-Wei Wang, Jun-Tao Lu, Lin Zhuang Oct 2020

A Model For The Anodic Carbonization Of Alkaline Polymer Electrolyte Fuel Cells, Qi-Hao Li, Ying-Ming Wang, Hua-Long Ma, Li Xiao, Gong-Wei Wang, Jun-Tao Lu, Lin Zhuang

Journal of Electrochemistry

The alkaline polymer electrolyte fuel cell (APEFC) has made appreciable progress in recent years but is still suffering performance loss during discharge with air as the oxidant. Several theories have been suggested to interpret the loss. However, efforts are still needed to reach a clear quantitative understanding. Based on the major experimental findings in combination with thermodynamics and kinetics of the reactions involved in the anode, this paper presents a model featuring layered carbonization in the anode and relevant grouped equations. The simulation results generated from the latter are compared with experiments, and possible principles to suppress the performance loss …

Go to article

Porous-Electrode Theory Of Lithium Ion Battery: Old Paradigm And New Challenge, Xiao-Xiao Wang, Zi-Rui Zhou, Qiang Shan, Zeng-Ming Zhang, Jun Huang, Yu-Wen Liu, Sheng-Li Chen Oct 2020

Porous-Electrode Theory Of Lithium Ion Battery: Old Paradigm And New Challenge, Xiao-Xiao Wang, Zi-Rui Zhou, Qiang Shan, Zeng-Ming Zhang, Jun Huang, Yu-Wen Liu, Sheng-Li Chen

Journal of Electrochemistry

A critical review on the porous electrode theory developed by Newman and his colleagues is presented. We propose several ideas for further development of this theory by analyzing its limitations. The classical Newman theory does not consider ion steric effect in describing ion transport in electrolyte solutions, which can be amended by a newly developed ion-vacancy coupled charge transfer model for ion transport in concentrated solutions. Ion transport in solid particles of active materials is essentially an ion-electron coupled transport process, and its rationality is verified by comparing the calculated and experimental diffusion coefficients of Li + ion in intercalation …

Go to article

Porous Electrodes In Electrochemical Energy Storage Systems, Wei-Xiao Ji, Gong-Wei Wang, Qiang Wang, Li-Jun Bai, De-Yang Qu Oct 2020

Porous Electrodes In Electrochemical Energy Storage Systems, Wei-Xiao Ji, Gong-Wei Wang, Qiang Wang, Li-Jun Bai, De-Yang Qu

Journal of Electrochemistry

Professor C.S. Cha was among the pioneers who have introduced modern electrochemistry to China. Under his leadership, the electrochemical research group in Wuhan University became one of the global powerhouses in fundamental and applied electrochemical researches. During the past many decades, Professor Cha and his colleagues in the university have educated and trained many students who have become part of the backbone of electrochemistry worldwide. In this review, we demonstrate the solid foundation laid by Professor Cha and his colleagues in Wuhan University, and the advancements made in the area of porous electrodes by the authors. All the authors in …

Go to article

First Prev Next Last