Physical Chemistry Commons^™

The Electrode Process Of Some Organic Dyes Studied By Spectroelectrochemical Technique In Situ, Yinxuan Tang, Hangsheng Yang, Baoen Shen

Journal of Electrochemistry

Spectroelectrochemistry especially with in situ measurement in a cell provides a very useful mthodology for measuring the parameters of electrode process. In this paper, we report the determination of formal potentials, the number of electron transfer, the diffusion coefficient, the heterogeneous electron transfer rate constant and the transfer coefficient of some organic dyes (Methyelene blue, Neutral red, Indigo carmine) using spectroelectro chemical technique in situ.

Effects Of Tunneling Electrons And Local Field On Nanometer Region Solid / Liquid Interfacial Reactions ——Potential Controlled Stm Induced Nanoscale Modification Of H Terminated Si(111) Surfaces, Zhaoxiong Xie, Xiongwei Cai, Caihui Shi, Bingwei Mao, Zhaowu Tian

Journal of Electrochemistry

H-terminated n-Si(111) surface was found to be etched in 0.5% HF solution in nanometer scale while scanning the STM tip when the substrate potential was somehow lower than the open circuit potential at tunneling condition of V_b=+1.0 V (tip positive), I_t=1 nA. Much more stable Si surface was achievable at potentials much more negative than the open circuit potential (such as 500 mV negative to OCP) under the same tunneling condition. Furthermore, the etching rete at less negative potential was found to be somehow related to the tunneling current. These results indicate that the STM induced …

Studies Of Electrocatalytic Properties Of Electrode Of Dispersed Pt On Gc Support In Ethylene Glycol Oxidation, Shengpei Chen, Shigang Sun, Zhiyou Zhou, Shuanjing Hong

Journal of Electrochemistry

The structures and properties of electrocatalyst of dispersed Plutinum (Pt) on glassy carbon (GC) support under different conditions were studied using cyclic voltammetry, potential step technique, X-ray diffraction (XRD) and scanning Electron microscopy (SEM). The results indicated that after having been treated in high temperature,the dispersed Pt on GC support was recrystallised with preferented orientation, and the grain of Pt microcrystal become large and regular. It was illustrated that the dispersed Pt on GC support after high temperature treatment exhibited better stability and high activity for ethylene glycol oxidation.

Polymer Electrolyte Fuel Cell Powered Vehicles, Naichao Li, Baolian Yi

Journal of Electrochemistry

The background, status and commercialization prospect of polymer electrolyte fuel cell vehicles are surveyed in this paper. The technology of this cell and system used in vehicles is discussed.

Electrochemical Behavior Of Superoxide Dismutase On Gold Minigrid With Thin Layer Cell, Xiaqin Wu, Qian Liu, Bin Xu, Xiaoyun Men, Zongrang Zhang

Journal of Electrochemistry

The electrochemical behavior of superoxide dismutase (Cu, Zn-SOD) was investigated on gold wire electrode and gold minigrid with thin layer cell by cyclic voltammetry. A quasi reversible redox wave of SOD has obtained on gold minigrid thin layer electrode, but only oxidation peak has observed on gold wire electrode. The electrochemical reaction parameters, such as the formal potential E^0′, diffusion coefficient D and standard rate constant k^0′ were estimated.

Electrodeposition Of Amorphous Fe-Cr Alloy Coating, Danhong Cheng, Weiyi Xu, Yiqin Qin, Liqun Hua, Zhongyan Zhang

Journal of Electrochemistry

The amorphous Fe-Cr alloy coatings were obtained by controlling the composition of bath operation conditions. It was found that the pH value, the current density and the content of chromium in Fe-Cr alloy coatings effect the amorphous structure of the coatings. The result of anodic polarization shows that the corrosion resistance of the amorphous coatings in acidic media is higher than the corrosion resistance of the crystal ones.

An Analysis On The Microstructure Of Electrodeposited Zro2-Ni Functionally Graded Materials, Chengjun Quan, Xinghua Xiang, Jingchuan Zhu, Zhongda Yin

Journal of Electrochemistry

The electrodeposited ZrO₂-Ni functionally graded coating was fabricated by controlling the ZrO₂ concentration in the bath, and the microstructure was analyzed by X-Ray Diffraction (XRD) and Electron Probe Microanalysis (EPMA). The results show that the functionally graded coating has excellent compositional gradient distribution from the substrate to the surface. The content of ZrO₂ is up to 14.4 vol% in the surface layer and the coating consists of the t-ZrO₂, m-ZrO₂ and Ni phases. Owing to the ZrO₂ particles pressed by Ni atoms during electrodepositing, t→m transformation has occurred.

Studies On Electrodeposition Of Rare Earth Metals And Their Alloys In Molten Salts, Qiqin Yang

Journal of Electrochemistry

The cyclic voltammetry, convolution voltammetry, potentiostatic electrolysis and open circuit potential time curve after electrolysis, current time curve at potential step, potential time curve at current step, X-ray diffraction, EDAX, electron probe microanalysis were used to investigate the electrode processes of the reduction of rare earth ions on inert electrodes and alloying electrodes in molten chlorides and fluorides. The free energies of formation for the intermetallic compounds, the diffusion coefficients of rare earth ions in the melt, the diffusion coefficients of rare earth atoms in the alloy phases were determined. The alloys of rare earth with iron, cobalt, nickel, copper, …

Surface Modification Of Molten Carbonate Fuel Cell Anode, Baizeng Fang, Xinyu Liu, Xindong Wang, Shuzhen Duan

Journal of Electrochemistry

In this study, the anode material of molten carbonate fuel cell was modified by the deposition of niobium on nickel surface. The results of polarization experiments reveal that the corrosion resistant properties as well as electrocatalytic activity have been improved greatly.

Study Of Electrodepositing Bright Tin Cobalt Zinc Alloy From Weak Acid Solution, Zhengzhong Zuo, Runxiang Hou, Shaochun Xia

Journal of Electrochemistry

A new process of electrodeposting bright Tin Cobalt Zinc alloy from weak acid solution is proposed in this paper. The solution compositions and operating conditions are Na₃C₆H₅O₇·2H₂O 100～150, Na₂EDTA·2H₂O 20～30, SnCl₂·2H₂O 15～20, CoSO₄·72H₂O 25～35, ZnCl₂ 15～20 g·L^-1; stabilizer WDZ-160～100, brightener WDZ-215～20 mL·L^-1; pH=4～6, D_K=0.5～5.0 A·dm^-2, T=5～35 ℃. A bright Sn-Co-Zn deposit having Co about 0.5～3.5% and Zn about 1～10% is produced. The effects of bath compositions on Co or …

Electroluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang

Journal of Electrochemistry

Porous silicon with micrometer size pores, which is made on n⁺-Si by photoelectrochemically etched, has electroluminescent property. Each monochromic intensity and wavelength range of luminescent spectra depend on polarized potential. The intersity and the stability of cathodic electroluminescence is high than those of anodic one. Voltammetric behavior before quenching indicated that the electrochemical reactions of some surface species are involved in except the reduction of S₂O₈^2-, which leads to radiative recombination. The energy band diagram based on n⁺-Si(E_g=1.1 eV)/PS(E_g=1.8 eV) junction is proposed.

Effects Of Curvature On The Electrochemical Behaviors Of Tubular Electrode, Yirong Wu, Zhenghao Wang

Journal of Electrochemistry

The convective diffusion equation of tubular electrode was solved with the implicit finite difference numerical method. Comparing with the electrochemical behaviors of channel electrode, the behaviors of tubular electrode were analysised. The effects of curvature on the electrochemical behaviors of tubular electrode and the limit of applying Levich approximation to tubular electrode were discussed.

Mechanism And Texture Of Ni-Mo Alloy Electrodeposition, Ling Huang, Shukai Xu, Jaoning Tang, Fangzu Yang, Shaomin Zhou

Journal of Electrochemistry

Ni-Mo alloy deposits with (111) preferred orientation was obtained in a solution of 0.22 mol/L NiSO₄·6H₂O, 0.06 mol/L Na₂MoO₄·2H₂O and 0.3 mol/L Na₃C₆H₅O₇·2H₂O in temperature from 25℃ to 50℃, and current densities ranged from 10 mA·cm^-2 to 30 mA·cm^-2. The electrodeposition of Ni-Mo alloy was studied by cylic voltammetry and potential step experiment. It was shown that Ni-Mo alloy is formed by mechanism involving progressive nucleation followed by three dimensional growth of the metal centres. The complex …

Study On The Preparation, Properties And Applications Of The Polymer/Graphite Composite Electrode, Guohua Chen, Jinrui Xu

Journal of Electrochemistry

The graphite AS composite electrodes, which show high electric conductivity, high mechanical strength and operationl stability, were prepared by filling and extruding the AS copolymer with graphite powder. It exhibited a substantial hydrogen overvoltage and small residual current in different electrolytes, as compared with glassy carbon electrode. The electrode was applied to the determination of traces of Pb²⁺ in mineral water, Ag⁺ in waste water and In³⁺, Cu²⁺, Pb²⁺, Cd²⁺ in zinc ore, and showed high stability, reproducibility and selectivity. Owing to the existence of abundant polar functioal groups on the …

Electrochemical Studies Of Spinel Limn2O4 Rechargeable Lithium Battery, Li Feng, Yuqin Chang, Lie Wu, Hong Li, Yibin San, Tianhong Lu

Journal of Electrochemistry

The spinel Li intercalation compound LiMn₂O₄ was prepared and studied using ac impedance and cyclic voltammogram techniques. It was first discussed that the impedance behaviors of LiMn₂O₄ electrode varied as lithium ion was intercalated in or out the electrode with the help of fractal theory. The Li reversible behaviors in LiMn₂O₄ electrode were shown by the cyclic voltammogram results.

Studies On The Cathodic Current Efficiency In The Electrodeposition Ni-Psz Gradient Coating, Jun Li, Dianlong Wang, Li Chen, Xinguo Hu

Journal of Electrochemistry

The cathodic current efficiency and the electrochemical behavior in electrodeposition Ni-PSZ gradient coating were investigated by various electrochemical techniques and scanning electron microscope. The results showed that the Ni-PSZ composite coatings can accelerate evolution of hydrogen with the increase of PSZ content. The overpotential of nickel reduction will be increased and that of hydrogen reaction will be reduced in the presence of PSZ particles in electrolyte. The effect of PSZ particles on nickel electrodeposition was preferentially to catalyze the formation of H ads . These all contributed to the lower current efficiency.

Studies On An Iron Heteropolyacid Redox Flow Battery, Peiju Sun, Wansheng You, Zhorgyin Tan

Journal of Electrochemistry

This paper reports a new Fe-HP redox flow cell. The positive and negative electrodes active materials are phosphomolybdic acid and acidified ferrous sulphate solutions respectively. Two activated porous carbon felt electrodes where the electrochemical reactions take place, are separated by a selective cation exchange membrane. The both couples have a suitable electrochemical reversibility on carbon and graphite electrodes. The active materials of the cell have very high stability. Moreover the cell has no life cycle limiting.

Electrochemical Synthesis And Characterization Of Ba-Pb-O And Bi-Pb-O Oxides, Min Xie, Liangzhong Zhao, Cuiying Xu, Jinbiao Zhang

Journal of Electrochemistry

Pb-based oxides Ba-Pb-O and Bi-Pb-O were synthesized from aqueous solutions by using electrochemical method. The resulting Ba-Pb-O and Bi-Pb-O were characterized using XPS, EDX and XRD. The results show that perovskite BaPb_0.9O₃ can be electrodeposited on the anode only from strong alkaline solution. In acid aqueous solution, conducting BiPb₂O_z oxide is fromed on the anode. In these oxides the nominal valence of lead is +4.

Problems Of The Study Of Anodic Films On Pb In Sulfuric Acid Solution (Ⅲ), Houtian Liu, Qunzhou Wang, Weifang Zhou, Wenbin Cai

Journal of Electrochemistry

The interstitial liquid among the particles in anodic Pb(Ⅱ) films could be the major passage for ion transportation. This is discussed with the mechanism of the cathodic reduction of anodic PbSO₄ film and the effect of Sb on the growth of anodic Pb(Ⅱ) oxides film.

Electrochemical Behaviors Of Isoalloxazine Confined In Montomorillonite Olay Modified Electrode, Zhibin Wu, Yuan Lin, Daodao Zhang, Haoqin Wu

Journal of Electrochemistry

A cyclic voltametric investigation of stability and redox properties of isoalloxazne on cetytrimethyammonium bromide (CTAB) modified montomorillonite clay platinium electrode in aqueous solution has been performed. pH dependent film concentrations and apparent diffusion coefficents were measured. The mechanism of the charge transport process with in the clay film were discussed.

Study On The Hydrophilicity Of Nafion Membrane Surface, Yanbing Zu, Chuansin Cha

Journal of Electrochemistry

Due to its high chemical stability and ion selective permeability, Nafion membrane has been applied in many electrochemical systems. The surface hydrophilicity is one of the main factors affecting its performance. In this paper, the bound bubble method is introduced as a suitable way to measure the contact angles between Nafion membrane and various aqueous solutions. During the measurement, Nafion membrane is saturated with given electrolyt solution. The hysteresis of the contact angles observed in the measurement is attributed to the co existance of hydrophobic and hydrophilic domains at the membrane surface. The effect of the solution surface tension on …

Study On Properties Of Magnesium Alloy Electrode With Anodized Film, Yi Chi, Ping Yang, Xiufeng Lin

Journal of Electrochemistry

The corrosion resistance of Mg alloy electrode with anodized film in atmosphere is bigger than that of the Mg alloy electrode with chromate film. The corrosion resisance and voltage delay of such electrode with anodized film in NaCl solution changed with anodizing comdition. The effects of composition, morphology and thickness of the anodized film on the peoperty of Mg alloy electrode are discussed.

Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅱ. The Carbon Material With Core Shell Structure And Its Positive Effect On Cell Performance Of Graphite Anode, Shuhua Ma, Hanju Guo, Ji Li, Hongze Liang, Xiabin Jing, Fosong Wang

Journal of Electrochemistry

The carbon powders and film electrode with core shell structure were prepared by carbonization in gas state with using refined coal as shell material and Artificial Graphite and Mesocarbon Microbeads (2 800 ℃) graphite as core material. Galvanostatic charge/discharge measurement showed that both steady charge/discharge capacity and first charge/discharge efficiency were improved. Cyclic voltammetry indicated that the peak at about 0.7 V vs. Li⁺/Li characteristic of decomposition of electrolyte got weakened, and a more compact film was formed. X-ray diffraction measurement suggested the existence of amorphous carbon shell on the carbon powders and carbon film.

A Study On The Electrodeposition Of Palladium And It's Nucleation, Fangzu Yang, Shukai Xu, Shibing Yao, Bingyi Chen, Xueqing Zheng, Xiaohui Zhong, Shaomin Zhou

Journal of Electrochemistry

The electrodeposition and nucleation of palladium are studied in the system of potassium citrate and ammonium oxalate. The results show that, with the additives of XP-4 and XP-7 prepared in our laboratory, a full bright palladium electrodeposits will be obtained in the wide ranges of the cathode current densities 0.5～3.5 A/dm² and temperature 40～60 ℃; the qualities of the thick deposits will be effectively improved by means of pulse current plating. Cyclic voltammograms results show that the division of peaks between anodic and cathodic on the electrode process of palladium will be up to 1.05 V, which shows the …

Preparation Of Powder Precursors And Evaporation Of Photoconductive Indium Sulfide Films, Chris Barber, Robert Engelken, Brandon Kemp, Wasim Aleem, Imran Khan, Chris Edrington, Michael Buck, Clayton Workman, Anup Thapa, Tom Jakobs

Journal of the Arkansas Academy of Science

We have demonstrated significant photoconductance in indium sulfide thin films prepared by thermal vacuum evaporation ofIn2$3 powders synthesized in-house by chemical precipitation ofInCl3 or In(CH3COO)3, and (NH4)2S or Na2S. The Delta G lambda/Gdark values have been as high as 0.1 in the initial unoptimized films. Excess sulfur (via a mixture of polysulfide and sulfide ions in the synthesis bath) appears to be important in achieving reproducible and large photoconductivities. In2S3 is particularly attractive as a lower toxicity alternative to CdS in optoelectronic applications such as photovoltaic and photoconductive cells.

Characterization Of Iron Oxides And Atmospheric Corrosion Of Steel, Sei Jin Oh

Physics Theses & Dissertations

The study of corrosion behavior was performed using three different analytical techniques, which provided information on the formation, development and layering of iron oxides on the corrosion products as a function of atmospheric conditions, exposure time and type of steel. In particular, the protective layer formed on weathering steel was investigated as a function of different amounts of alloying elements in the steel, atmospheric conditions and exposure times. Combined together, the results provided a better understanding of the atmospheric corrosion behavior of steel, and formed a part of database of the atmospheric corrosion characteristics.

Accurate characterization of the iron oxides …

High Active Platinum Plated Titanium Electrode, Xiufeng Xiao, Zeshan Zhu, Yanzhen Chen, Wenyun Hu

Journal of Electrochemistry

To prepare the adherent and high active platinum plated titanium electrode, ultrasonic agitation technology and the best conditions of electrodeposition were adopted. Ultrasonic agitation technology can be improved the cohesion between coatings and substrate. The activity of electrode has related to the double layer capacity of electrode, which was due to the electrode rugosity.

Studies Of Electrochemical Behaviors Of Cytochrome C On Pretreated Gold Electrode, Jin Luo, Lingling Wu, Shaohua Huang, Zhonghua Lin

Journal of Electrochemistry

The quasi reversible responses of both adsorbed and bulk cytochrome c at the pretreated gold electrode are observed. The adsorption behaviors and reaction kinetics have been studied using in situ FTIR spectroscopy, UV/Vis reflection spectroscopy, voltammetry, AC impedance and potential step methods. The results show that the cytochrome c can irreversibly adsorb on the gold surface in a complete monolayer and the adsorbed layer can mediate the redox reaction of the cytochrome c in the solution in the absence of promoter.

Progresses In The Studies On Electrochemical And Surface Properties Of Hydrogen Storage Alloy Materials, Yong Yang, Jum Li, Zugeng Lin

Journal of Electrochemistry

Recent progresses in the studies on electrochemical and surface properties of hydrogen storage alloy materials are reviewed. This paper includes three sections: 1) Thermodynamic and kinetic studies of metal hydride electrodes, 2) Effects of micro structure and alloy elements of the materials on the electrochemical properties of the electrodes and 3) Correlation between surface properties of the alloy materials and performance of the negative electrode in the nickel metal hydride batteries.

Electrochemical Studies Of Cyanocobalamin On Silver Electrode, Zhai Jin, Yang Pin, Donghong Zheng, Junwei Zheng, Tianhong Lu

Journal of Electrochemistry

The electrochemical characteristics of cyanocobalamin were separately studied on smooth and roughed silver electrode. It was found that the reduction of cyanocobalamin is two one electron steps on roughed silver but one two electron step on smooth electrode. The reason is due to the ability of absorption of the surface of electrode.