Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 1381 - 1410 of 2272

Full-Text Articles in Physical Chemistry

Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu Nov 2008

Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu

Journal of Electrochemistry

Hydrophilic aluminum oxide is popularly used for heat exchanger of air-condition.Herein,we developed a simple method to prepare superhydrophilic aluminum oxide on the surface of aluminum through single-step electrochemical oxidization.The morphologies and water contact angles on surfaces of alumina fabricated under different electrochemical conditions were investgated.Superhydrophilic surfaces fabricated by this method have good stability and high mechanical strength with water contact angle almost 0°.Coated with low surface energy materials,superhydrophilc alumina will be converted to superhydrophobic.

Go to article

Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang Nov 2008

Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang

Journal of Electrochemistry

A modified electrode has been constructed by depositing a novel copper(Ⅱ) complex 2biPy(ClO4)4 on the glassy carbon electrode through the method of cyclic voltammetry(CV).It was found that the modified electrode exhibited high electrocatalytic activity toward L-Cysteine oxidation with good reproducibility and high sensitivity.The peak current of semi-derivative linear scan was proportional to the concentration of L-cys in the range of 1×10-6～3×10-4 mol·L-1.The detection limit was 5×10-7 mol·L-1.

Go to article

Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu Aug 2008

Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu

Journal of Electrochemistry

The electrochemical reductive behavior of 3,4,5,6-tetrachloro-2-trichloropyridine(heptachloropyridine) on silver electrode in the mixture of acetonitrile and water solutions containing TBAP was investigated by cyclic voltammetry.The influences of scan rate,concentration and temperature on the electrochemical behavior were discussed.It was shown that the reduction of heptachloropyridine on the silver electrode was a diffusion-controlled irreversible process.The diffusion coefficient of heptachloropyridine in the acetonitrile solution was 3.0×10-5 cm2/s.The mechanism of the dechloration of 3,4,5,6-tetrachloro-2-trichloropyridine was also discussed.

Go to article

Electrochemical Synthesis, Characterization And Fluorescence Property Of Nano Na2Sif6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu Aug 2008

Electrochemical Synthesis, Characterization And Fluorescence Property Of Nano Na2Sif6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu

Journal of Electrochemistry

The nano TiO2 film was prepared by sol-gel process and characterized with X-ray diffraction(XRD) and scanning electron microscope(SEM).It was found that the average size of pore diameter was about 80 nm for the nano TiO2 film.The Nano Na2SiF6 was synthesized by electrochemical deposition on the nanoporous film electrode and characterized with XRD and transmission electron microscope(TEM).The result showed that the average size of nanoparticle was 20 nm for the nano Na2SiF6.The fluorescence property of nano Na2SiF6 was also studied briefly.The result indicated that the nano Na2SiF …

Go to article

Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan Aug 2008

Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan

Journal of Electrochemistry

Microbial fuel cells(MFCs) were constructed by inoculating fresh sedimentary microorganisms.Effect of phenol on performance of MFCs was investigated.The results showed that the generation of electrical current was induced by bacteria attached on the surface of the anode.Presence of phenol reduced the rate of glucose consumption and extended the duration of electricity generation with the same addition of glucose.In addition,the electricity generation by a single strain(belonging to pseudomonas species) separated from the sedimentary MFC was also investigated.The experimental results indicated that the presence of metabolic intermediates which exhibited electrochemical activity was necessary for the electricity production.Analysis of GC-MS showed that the …

Go to article

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang Aug 2008

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang

Journal of Electrochemistry

Microcrystals of metallic copper were electrochemically deposited onto the surface of porous silicon films in the aqueous electrolyte of copper(II) chloride.The microstructures of electrochemically deposited copper microcrystals on the porous silicon films were characterized by using scanning electron microscopy.The results have demonstrated that both center-hollowed and center-solid equilateral triangles in the sizes of several micrometers can be formed on the smooth bed of copper microcrystals.As the deposition duration increased from 0 to 28 hours,the fractal dimensions of the porous silicon was decreased from 2.608 to 2.252,suggesting that the electrochemical deposition can smooth the rough surface of porous silicon films.Compared to …

Go to article

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu Aug 2008

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu

Journal of Electrochemistry

In this paper,it is reported for the first time that the electrocatalytic activities of the carbon supported Au(Au/C),carbon supported Ir(Ir/C) and the carbon supported Au-Ir(Au-Ir/C) catalysts prepared in the aqueous solution with tetrahydrofuran(THF) for the oxidation of formic acid and for the oxygen reduction were compared.It was found that all three catalysts showed no electrocatalytic activity for the oxidation of formic acid,but the electrocatalytic activity of the Au-Ir/C catalyst for oxygen reduction was much better than those of Au/C and Ir/C.Thus,the Au-Ir/C catalyst is suitable to be used as the cathodic catalyst in Direct formic acid fuel cell(DFAFC).

Go to article

An Hap/Nanosilver Coating Prepared By Electrochemical Deposition And Its Antibacterial Characterization, Zhi-Wang Geng, Hui Wang, Chang-Jian Lin Aug 2008

An Hap/Nanosilver Coating Prepared By Electrochemical Deposition And Its Antibacterial Characterization, Zhi-Wang Geng, Hui Wang, Chang-Jian Lin

Journal of Electrochemistry

The silver nanoparticles were prepared by sodium citrate reduction of AgNO3.The nanoparticles were electrophoretic deposited on titanium, followed by the electrolytic deposition of hydroxyapatite(HAp). It is revealed, by the high-resolution transmission electron microscopy(HRTEM), that the diameters of nanosilver particles ranged from 5nm to 20nm. The XPS and XRD indicated the coating consisting of silver and HAp. According to the SEM images and antibacterial test, it is demonstrated that when the concentrations of the electrophoretic solution became higher more silver particles were depostited, and the antibacterial property improved. However, the particles aggregated on titanium greatly when the concentration exceeded …

Go to article

Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie Aug 2008

Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie

Journal of Electrochemistry

The micromorphology of zinc electrodeposited at different currents in the flowing electrolyte was studied.It has been shown that the structure of the zinc became compacted with the increase of the charge current density and no zinc dendrite was presenct.A cell with 2Ah capacity was assembled and the charge-discharge test was performed.The results showed that the average charge voltage was 1.84V and the average discharge voltage was 1.65V.The high efficiencies can be achieved with an average coulombic efficiency of 97% and energy efficiency of 86% over 1000 cycles.

Go to article

Direct Electrochemistry Of Hemoglobin On The Electrode Modified With Ddab And Swcnt, Wen-Jing Hou, Lin Zhou, Xia-Qin Wu, Hong-Xia Zhang, Wen Xie, Liu Yang, Zhong-Qing Lu Aug 2008

Direct Electrochemistry Of Hemoglobin On The Electrode Modified With Ddab And Swcnt, Wen-Jing Hou, Lin Zhou, Xia-Qin Wu, Hong-Xia Zhang, Wen Xie, Liu Yang, Zhong-Qing Lu

Journal of Electrochemistry

Hemoglobin(Hb) was immobilized onto the surface of glassy carbon electrode with the single-wall carbon nanotubes and surfactant didodecyldimethylamonium bromide(DDAB) modified previously and its electrochemical behaviors have been investigated by cyclic voltammetry.A pair of well-defined redox peaks has been obtained.Cyclic voltammetry and electrochemical impedance spectroscopy(EIS) were also used to study on the effect of different concentration of SWCNT in DDAB.The result shows that the 1 mg/mL is the best choice.The dependence of E0' on solution pH with the slope of 39 mV/pH,indicated that redox of the Hb is a one electron reaction with two protons transfer.The results also showed …

Go to article

The Effect Of Ru: Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue Aug 2008

The Effect Of Ru: Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue

Journal of Electrochemistry

The anode coatings of Ru-Ir-Sn oxide with different Ru/Sn ratios were prepared by sol-gel method.The influences of Ru/Sn ratio on properties of anode coatings were studied by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD).The potential of chlorine evolution,current efficiency,accelerated life,cyclic vohammetry and electrochemical impedance spectroscopy(EIS) tests were carried out.The results showed that there was an obvious effect of Ru/Sn ratio on the morphology of the coatings.The cyclic voltammogram,double layer capacitances and accelerated life of anode coatings had a tendency to fall down firstly then increased as the Ru% increased,the current effency and potential of chlorine evolution had a tendency to …

Go to article

Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang Aug 2008

Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang

Journal of Electrochemistry

This paper presented a method of hydrogen generation from sodium borohydride solution for fuel cells.The Ru-Ni foam catalyst which was prepared by chemical plating showed strong activity and stability.The pretreatment of Ni foam before chemical plating was very important for the catalyst's strong activity and stability.This easy-to-prepared catalyst exhibited a good activity after being used several times.The effects of NaBH4 concentration,temperature and used times on the hydrogen generation rate were investigated.The results showed that the rate was remarkablely increased with the temperature rising and the rate increased more than ten times when the temperature of reaction rised from 15 …

Go to article

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding Aug 2008

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding

Journal of Electrochemistry

The nanoporous gold(NPG) electrodes with uniform pore sizes and ligaments were prepared by using a simple dealloying method.The as-prepared NPG showed high catalytic activity towards the oxidation of formic acid and formaldehyde.After tiny amount of platinum was deposited onto the NPG substrate,not only the structure stability of NPG was greatly improved,but also the Pt-Au bimetallic catalysts displayed the better catalytic activity and the stronger poison resistance towards the electrooxidation of small organic molecules than the bulk platinum due to synergistic effect between Au and Pt compositions.

Go to article

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li Aug 2008

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li

Journal of Electrochemistry

The multi-wall carbon nanotubes(MWNT) were dispersed successfully into water in the presence of dihexadecyl hydrogen phosphate(DHP) and a stable well-distributed suspension.A was formed sensor based on the multi-carbon nanotubes film coated glassy carbon electrode was developed.The electrochemical response of salbutamol was studied by square wave voltammetry.The oxidation peak potential of salbutamol at the modified electrode was observed at 0.604 V,which shifted about 40 mV negatively.The peak current increased 4.5 folds,in contrast to that at a bare electrode.Under optimal measurement conditions,there was a good linear relationship between the peak current(Ipa) and salbutamol concentration(C) in the range from 8.3 × 1 0 …

Go to article

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao Aug 2008

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density …

Go to article

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang Aug 2008

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang

Journal of Electrochemistry

A gold nano-particles modified glassy carbon electrode(GNP/GCE) was prepared by the"seed-mediated gold nano-particles growth method".Field emission scanning electron microscopy,ultraviolet-visible(UV-vis) spectroscopy analysis and electroalaylsis were employed to study the morphology and electrochemical performances.The resulting electrode showed excellent electro-catalytic activity toward the oxidation of salicylic acid and the response sensitivity was 1.8 fold than that obtained on GCE.Good linear relationship was obtained between response current and salicylic acid concentration in the range of 5.0 × 10-7 ~8.0 × 10-5 mol/L,which could be used in the detection of trace salicylic acid.

Go to article

Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang Aug 2008

Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang

Journal of Electrochemistry

Hemoglobin(Hb) has been immobilized on a glassy carbon electrode(GCE) surface with konjac glucomannan(KGM) and room temperature ionic liquid(RTIL).And which electrochemical behaviors have been investigated by cyclic voltammetry.The results shown that the entrapped Hemoglobin undergoes fast direct electron transfer reactions with formal potential of-0.38V(vs.SCE) and the E0' is linearly dependent on solution pH with a slope value of 51 mV/pH,due to the electron transfer of HbFe3+/HbFe2+ redox couple companied with a proton transfer.The electrocatalytic reduction of oxygen was also explored at the Hb-KGM/RTIL/Nafion/ GC electrode.

Go to article

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang Aug 2008

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang

Journal of Electrochemistry

Polyaluminum chloride(PAC) was prepared by electrochemical process coupled with magnetic field paralleling to the gravitation direction.The electrolyte of 0.1 M AlCl3 solution was used,with the iron plates as cathode and aluminum sheets as anode.PAC of 0.6 M total aluminum(AlT),83.2% Alb to AlT and basicity(Ba)=2.4 was synthesized when magnetic flux density was 0.4T,the distance of electrodes was 15 mm,the voltage of electrolysis cell was 2.4 V and current density was 300 A/m2.Under above experimental conditions,the voltage efficiency,energy efficiency and electrodes surface area to reduction cells of electrochemical reactor were 85.2%,81.5% and 140.1m2/m3,respectively.The polarization curves determined by constant-current method showed that the …

Go to article

Preparation And Supercapacitive Properties Of Co(Oh)2/Nay Composite, Chi Ma, Ling-Bin Kong, Yong-Chun Luo, Long Kang Aug 2008

Preparation And Supercapacitive Properties Of Co(Oh)2/Nay Composite, Chi Ma, Ling-Bin Kong, Yong-Chun Luo, Long Kang

Journal of Electrochemistry

The Co(OH)2/NaY composite was prepared by chemical precipitation method and then tested as an active electrode material for an electrochemical supercapacitor.The results indicated that the composite displayed superior capacitive performance.The maximum specific capacitance of Co(OH)2 was 632.5 F/g.The structure and electrochemical properties of the composite were also discussed.

Go to article

Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng Aug 2008

Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng

Journal of Electrochemistry

The self-assembled film of triethyl phosphate(TEP) formed on the iron surface was found to protect iron from corrosion in 0.5 mol·L-1 H2SO4 efficiently. The inhibition effects were investigated using the electrochemical impedance spectroscopy(EIS).EIS demonstrated that the charge-transfer resistance of the electrode covered with TEP film was greater than that of the naked iron electrodes and the inhibition efficiency of TEP film increased quickly in the initial period and then increased slowly. Quantum chemical calculations provide information about the process of adsorption of molecules on the metal surface at the molecular level.

Go to article

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo Aug 2008

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo

Journal of Electrochemistry

The self-assembled films of tetradecylamine were formed on iron surface, and the inhibition ability of which for iron corrosion in 0.5 mol/L H2SO4 solutions was studied by electrochemical impedance spectroscopy technique. Results indicated that longer immersion time would result in stronger inhibition ability of the films. The maximal inhibition efficiency(IE) of the tetradecylamine films was 68.7%. When the tetradecylamine films were modified by dodecylthiol, the mixed films became denser and more stable, thus the inhibition ability increased remarkably. The η of the mixed films increased to 78.2%.

Go to article

Synthesis And Electrochemical Characteristics Of Li[Li(0.167)Mn(0.583)Ni(0.25)]O2 Cathode Material, Ling-Yan Yu, Wei-Hua Qiu, Fang Lian, Jia-Yuan Huang, Xao-Li Kang, Wei Liu May 2008

Synthesis And Electrochemical Characteristics Of Li[Li(0.167)Mn(0.583)Ni(0.25)]O2 Cathode Material, Ling-Yan Yu, Wei-Hua Qiu, Fang Lian, Jia-Yuan Huang, Xao-Li Kang, Wei Liu

Journal of Electrochemistry

The cathode material of Li[Li0.167Mn0.583Ni0.25]O2 was synthesized by low-heat solid state reaction.The results of XRD and FESEM indicated that the powders of the material were well crystallized with the uniform diameters ranging from 60 nm to 100 nm and could be indexed as α-NaFeO2 structure(R3-m space). Galvanostatic charge-discharge tests showed that the electrode delivered the capacity of about 120 mAh/g with good cyclability when cycled in 2.5~4.4V at 0.5C. When the cut-off potential was set up to 4.6V, the cathode delivered much larger capacities with the maximum of 234 mAh/g. It was …

Go to article

Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao May 2008

Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao

Journal of Electrochemistry

The performance of the passive DMFC was systematically investigated under an ambient condition by simulating a wide range of temperature and humidity in a high-quality environmentally controlled room.The results indicated that the performance of the passive DMFC was nearly independent of ambient humidity from 30% to 90% RH and water produced in the cathode was expelled mostly from the cell in a liquid state.Compared with the humidity,the ambient temperature has a significant effect on the performance of the passive DMFC.The power density of 30 mW·cm-2 were obtained at 40℃,while only 10 mW·cm-2 at 10 ℃.

Go to article

Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji May 2008

Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji

Journal of Electrochemistry

According to the complex interaction between dodecyl phosphonate and stainless steel surface as well as the zirconium ion,the self-assembled monolayer and double-layer dodecyl phosphonate modified 304 type stainless steel electrode were prepared.The electrodes were characteristiced by static contact angles and electrochemical polarization methods.The results suggested that the double-layer modified stainless steel electrode had better corrosion inhibition effect than the monolayer modified electrode.

Go to article

Electrodeposition Of Sol-Gel Imprinted Films Modified Electrode And Its Application For 3,4-Dihydroxybenzoic Acids Determination, Gui-Lin Wang, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang May 2008

Electrodeposition Of Sol-Gel Imprinted Films Modified Electrode And Its Application For 3,4-Dihydroxybenzoic Acids Determination, Gui-Lin Wang, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang

Journal of Electrochemistry

The sol-gel molecularly imprinted films modified glassy carbon electrode was prepared by electrodeposition of tetramethoxysilane(TMOS) and phenyltrimethoxysilane(PTMOS) with chronoamperometry in the presence of template molecules 3,4-dihydroxybenzoic acid(3,4-DHBA) followed by extraction with ethanol.The modified electrode could successfully avoid the polymerization of oxidized 3,4-DHBA and the interference of 2,4-DHBA.A linear concentration response curve was obtained from 1.0 × 10-5 mol·L-1 to 8.0×10-4 mol·L-1,with the detected concentration limit of 5.0 × 10-6 mol·L-1.

Go to article

Preparation And Catalytic Activity Of Nanostructured Pd And Au-Pd Thin Films, Cui-Cui Qiu, Jin-Tao Zhang, Fang Tian, Hou-Yi Ma May 2008

Preparation And Catalytic Activity Of Nanostructured Pd And Au-Pd Thin Films, Cui-Cui Qiu, Jin-Tao Zhang, Fang Tian, Hou-Yi Ma

Journal of Electrochemistry

The nanostructured Pd thin films were directly formed on the glassy carbon electrode(GCE) substrates by using potential cycling method.The as-prepared Pd thin films deposited onto the GCE were able to absorb enough amount of hydrogen in acidic solutions at the cathodic potentials more negative than the hydrogen evolution potential.Moreover,the absorbed hydrogen could be used as the reducing agent to reduce gold(III) ions to Au nanoclusters,thereby forming bimetallic Au-Pd thin films on the GCE substrate.SEM and cyclic voltammetry characterization demonstrated that the Au-Pd thin films display much higher catalytic activity towards the electro-oxidation of ethanol than the pure Pd thin films.

Go to article

Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing May 2008

Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing

Journal of Electrochemistry

The development and improvement of electrode materials can result in the enhancement of the performances of electrochemical capacitor.In this paper various copper/activated carbon composites were prepared in the presence of different amounts(from 0% to 40%) of copper nitrate from bituminous coal.Then different electrodes were prepared from copper oxide,activated carbon and copper/activated carbon composites,respectively,and were characterized by cyclic voltammetry,alternative current(AC) impedance,charge-discharge at constant current and maintenance of the self-potential.The results showed that the proper amount of copper in copper/activated carbon composites positively influenced the electrochemical performances of electrodes,and the capacitance of copper/activated carbon composites was larger than that of the total …

Go to article

Preparation Of Zn-Ni Alloy Whisker By Electrochemical Method, Zhen-Hai Liang, Xi-Hua Xia May 2008

Preparation Of Zn-Ni Alloy Whisker By Electrochemical Method, Zhen-Hai Liang, Xi-Hua Xia

Journal of Electrochemistry

The Zn-Ni alloy whiskers were prepared by electrochemical method and were characterized by XRD, SEM and EDS methods. The results showed that Ni5Zn21 and Ni3Zn22 whiskers were obtained with the length of 2~4 μm and the diameter of 250 nm, thereby the rations of length/diameter fell between 8 and 16. The electrochemical behavior was investigated by cyclic voltammetry method simultaneously. A new method was provided on whisker preparation based on this work.

Go to article

Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang May 2008

Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang

Journal of Electrochemistry

The carbon nanotube arrays(CNTA) were grown directly on the substrates of Ta and stainless steel by chemical vapor deposition.The button-like supercapacitors were fabricated based the CNTA electrodes.The electrochemical performance of CNTA based supercapacitors presentsed high working voltage(3.5 V),long cycle life,and good rate capability.The power and energy densities are were 928 kW·kg-1 and 19 Wh·kg-1,respectively(based on the mass of CNTA).

Go to article

Direct Electrochemistry Of God On Glassy Carbon Electrode Modified With Mesoporous Carbon, Kun-Qi Wang, Lin Zhu, Wei Xing May 2008

Direct Electrochemistry Of God On Glassy Carbon Electrode Modified With Mesoporous Carbon, Kun-Qi Wang, Lin Zhu, Wei Xing

Journal of Electrochemistry

Glucose oxidase(GOD) is immobilized on glassy carbon electrode mesoporous carbon by simple method.Cyclic voltammetric results indicated that on GOD of the modified electrode a quasi-reversible redox reaction took place(GCE) surface modified at a formal potential of-0.4294 V in 0.1 mol/L phosphate buffer solution(PBS)(pH 7.1).The electrochemical reaction consisted of a two-electron transfer coupled with a two-proton transfer.The GOD can completely catalyze oxidation of glucose via electron transfer intermedia of ferrocene monocarboxylic acid(FMCA) in saturated solutions with N2.The bioactivity of GOD on the modified electrode with mesoporous carbon was obviously unattacked.

Go to article

First Prev Next Last