Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Electrocatalysis (62)
- Oxygen reduction reaction (61)
- Lithium ion battery (54)
- Cyclic voltammetry (39)
- Supercapacitor (39)
-
- Cathode material (34)
- Lithium-ion batteries (33)
- Electrochemical performance (32)
- Fuel cell (31)
- Lithium-ion battery (28)
- Carbon nanotubes (23)
- Lithium ion batteries (22)
- Electrochemistry (21)
- Anode (20)
- Cathode (19)
- Lithium-sulfur batteries (19)
- Anode materials (18)
- Oxygen evolution reaction (18)
- Anode material (17)
- Electrocatalyst (17)
- Electrochemical impedance spectroscopy (17)
- Electrolyte (17)
- Fuel cells (17)
- Electrochemical oxidation (16)
- Li-ion battery (15)
- Cathode materials (14)
- Proton exchange membrane fuel cell (14)
- Solid oxide fuel cell (14)
- Methanol (13)
- Modified electrode (13)
- Publication Year
- Publication
-
- Journal of Electrochemistry (1274)
- Electrical & Systems Engineering Publications and Presentations (8)
- Electrical & Computer Engineering Faculty Publications (6)
- Theses and Dissertations (4)
- Bioelectrics Publications (2)
-
- Chemistry & Biochemistry Faculty Publications (2)
- Graduate Theses and Dissertations (2)
- UNLV Theses, Dissertations, Professional Papers, and Capstones (2)
- Applied Research Center Publications (1)
- Articles (1)
- Department of Electrical and Computer Engineering: Faculty Publications (1)
- Electrical & Computer Engineering Theses & Dissertations (1)
- Electronic Theses and Dissertations (1)
- Faculty Publications (1)
- Honors Thesis (1)
- Masters Theses & Specialist Projects (1)
- Student Works (2020-2029) (1)
- University Administration Publications (1)
- Publication Type
Articles 691 - 720 of 1310
Full-Text Articles in Physical Chemistry
Novel Molten-Salt Electrolysis Processes Towards Low-Carbon Metallurgy, Wei Xiao, Hua Zhu, Hua-Yi Yin, De-Hua Wang
Novel Molten-Salt Electrolysis Processes Towards Low-Carbon Metallurgy, Wei Xiao, Hua Zhu, Hua-Yi Yin, De-Hua Wang
Journal of Electrochemistry
This review focuses on recent developments in molten-salt electrolytic metallurgical processes with respect to 1) high-efficiency metallurgical technologies via electrolytic reduction of solid oxides in molten chlorides and 2) zero-carbon-footprint electrochemical splitting metallurgical technologies. Initiating with an introduction on dynamic solid/solid/liquid three-phrase interlines electrochemistry for electrochemical reduction of solid cathode, the former aspect is discussed in terms of facilitating mass transfer throughout solid cathode, one-step production of functional alloy powders with the assistance of under-potential electroreduction of active metals and near-net-shape production of metal/alloy components. Whilst the latter is summarized by introducing some zero-carbon molten-salt electrolytic technologies including electro-splitting of …
Comments On Internal Alternating Current Resistance Test Standard And Methods Of Lithium-Ion Batteries, Ya-Li Zhang, Sen Xin, Yu-Guo Guo, Li-Jun Wan
Comments On Internal Alternating Current Resistance Test Standard And Methods Of Lithium-Ion Batteries, Ya-Li Zhang, Sen Xin, Yu-Guo Guo, Li-Jun Wan
Journal of Electrochemistry
The sustainable development of energy and environment is one of the most influential issues of this century. Batteries, especially secondary batteries are important for powering out daily life. However, in many practical applications, such as in electric vehicles and hybrid electric vehicles, batteries should be used in packs and the performance consistency of each battery in the pack should be taken into consideration. As one of the performance parameters being used to characterize the battery consistency, internal resistance is of great importance to the industrial fabrication and the use of batteries. Currently, internal resistance tests of secondary batteries, such as …
Methodological Significance Of "Property-Activity Relationship" For Catalyst Studies, Jun-Tao Lu, Li Xiao, De-Li Wang, Yu-Bao Sun, Yan-Ge Suo, Lin Zhuang
Methodological Significance Of "Property-Activity Relationship" For Catalyst Studies, Jun-Tao Lu, Li Xiao, De-Li Wang, Yu-Bao Sun, Yan-Ge Suo, Lin Zhuang
Journal of Electrochemistry
Instead of attempting the structure-activity relationship (SAR), which is commonly regarded as the core problem for catalyst studies, this paper highlights the methodological significance of “property-activity relationship (PAR)”. The “property” here refers to an index （such as the adsorption energy of an intermediate） or a group of indexes reflecting the behavior of a catalyst which interacts with reactants or intermediates, and is a bridge between structure and activity. Because property is related to activity more directly than structure to activity, PAR should be simpler, less difficult and, therefore, more feasible to be accessed than SAR. Once the key property is …
Simple Analysis And Possible Solutions Of The Unusual Interfacial Reactions In Li-S Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang
Simple Analysis And Possible Solutions Of The Unusual Interfacial Reactions In Li-S Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang
Journal of Electrochemistry
Rechargeable Li-S batteries are a promising power source with realizable energy densities several times higher than current Li-ion batteries. However, the capacity utilization and cycling stability of the existing Li-S technologies are still insufficient for battery applications. The causes for the electrochemical instability of this redox system arise probably from the changes in the surface structures and electrochemical microenvironments of the Li anode and sulfur cathode during charge-discharge reactions, which includes the frustrated electron transfer in the sulfur-carbon interface, the dissoluble diffusion of the polysulfide intermediates, and the shuttle reaction inbetween the sulfur and Li electrodes. To deal with these …
Application Of First Principles Calculations In Anode Materials For Lithium Ion Batteries, Tian-Ran Zhang, Dai-Xin Li, Si-Qi Yang, Zhan-Liang Tao, Jun Chen
Application Of First Principles Calculations In Anode Materials For Lithium Ion Batteries, Tian-Ran Zhang, Dai-Xin Li, Si-Qi Yang, Zhan-Liang Tao, Jun Chen
Journal of Electrochemistry
First principles calculations play an important role in the study and development of new materials for lithium batteries. In this paper, we review the application of first principles calculations in the design of anode materials, including the modeling of the interaction of lithium in the anode materials, capacity, voltage, electrochemical reaction process, diffusion, rate capability, the relationship between the structure and properties, and the experimental phenomena interpreting. Based on the discussions, we emphasize on the importance of first principles calculations and demonstrate their requirement for further development.
The Electrocatalytic Performance Of Pd Catalysts Supported On Pvp Modified Mwcnts For Formic Acid Oxidation, Jing Zhang, Xiao Zhao, Chang-Peng Liu, Wei Xing
The Electrocatalytic Performance Of Pd Catalysts Supported On Pvp Modified Mwcnts For Formic Acid Oxidation, Jing Zhang, Xiao Zhao, Chang-Peng Liu, Wei Xing
Journal of Electrochemistry
In this paper the MWCNTs were modified by Poly (N-vinyl-2-pyrrolidone) (PVP) to support Pd nanoparticles, which were used as the catalyst for formic acid electrooxidation. And the performance of Pd/PVP-MWCNTs catalysts was studied by electrochemical measurements. The observations from Fourier transforms infrared spectrometer (FTIR) and transmission electron microscopy (TEM) illustrated that the Pd nanoparticles with a small size and narrow size distribution were highly dispersed on PVP-MWCNT support. Therefore, the Pd/PVP-MWCNTs catalysts showed excellent catalytic activity for formic acid electrooxidation.
Synthesis Of Spherical Ni3S4 By Solvothermal Method As Supercapacitor Electrodes, Qing-Na Huan, Li-Fang Jiao, Qing-Hong Wang, Hong-Mei Du, Jia-Qin Yang, Wen-Xiu Peng, Yi-Jing Wang, Hua-Tang Yuan
Synthesis Of Spherical Ni3S4 By Solvothermal Method As Supercapacitor Electrodes, Qing-Na Huan, Li-Fang Jiao, Qing-Hong Wang, Hong-Mei Du, Jia-Qin Yang, Wen-Xiu Peng, Yi-Jing Wang, Hua-Tang Yuan
Journal of Electrochemistry
The Ni3S4 microspheres have been synthesized via a facile solvothermal method. The crystal structure and surface morphology are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Microspherical Ni3S4 exhibits good electrochemical capacitance validated by electrochemical measurements. The specific capacities of 1120.6 F∙g-1 at 0.5 A∙g-1 and 433.4 F∙g-1 at 4 A∙g-1 with the capacitance retention of 89.37 % and 84.88 % were obtained after 1000 cycles, respectively. The electrochemical reaction is expected due to the transformation of Ni(OH)2 and NiOOH based on the XRD, XPS and CV …
Electrochemical Preparation Of Nanostructural Pt-Ni And Pd-Ni Films For Ethanol Electro-Oxidation, Chen-Zhong Yao, Hui-Xuan Ma, Bo-Hui Wei
Electrochemical Preparation Of Nanostructural Pt-Ni And Pd-Ni Films For Ethanol Electro-Oxidation, Chen-Zhong Yao, Hui-Xuan Ma, Bo-Hui Wei
Journal of Electrochemistry
The Pt-Ni and Pd-Ni films were successfully prepared on Ti substrates by electrodeposition method. The porous Pt-Ni nanoflakes appeared to be uniform with the thickness of the slices about 10 ~ 20 nm. The porous Pd-Ni nanoparticles with a flower shape appeared to be uniform with the diameters of 50 ~ 60 nm. The XRD patterns also indicated that the Pd-Ni and Pt-Ni nanostructures have the poor crystallinity. The onset potentials of ethanol oxidation were negatively shifted to –0.74 V on Pt-Ni electrodes and –0.71 V on Pd-Ni electrodes, respectively. Addition of Ni could enhance catalytic activities and antitoxic properties …
Ethanol Electrooxidation On Pt/Mo2/Cnts Catalysts, Yu-Long Cheng, Jie Sun, Ji-Gang Li, Li-Gong Zhang, Tian Zhou, Geng Chang, Zhong-Chao Dong
Ethanol Electrooxidation On Pt/Mo2/Cnts Catalysts, Yu-Long Cheng, Jie Sun, Ji-Gang Li, Li-Gong Zhang, Tian Zhou, Geng Chang, Zhong-Chao Dong
Journal of Electrochemistry
The ethanol electrooxidation behaviors on Pt/MO2/CNTs（M=Sn, Ti, Ce）and Pt/CNTs catalysts in H2SO4 solutions were researched by cyclic voltammetry. It has revealed that the catalysts with the addition of metal oxides presented higher electrooxidation activity for ethanol, in particular, the Pt/CeO2/CNTs catalyst showed the best activity for ethanol electrooxidation intermediate. The Pt/SnO2/CNTs catalyst demonstrated the best ethanol electrooxidation activity when considering the synthetic effects of such parameters as the onset oxidation potential, peak current densities and total oxidation area.
Preparation And Electrochemical Performance Of Mo-Doped Li3V2(Po4)3/C Cathode Materials, Zhi-Yuan Tang, Wei Yuan, Ji Yan, Wen-Feng Mao, Li Ma
Preparation And Electrochemical Performance Of Mo-Doped Li3V2(Po4)3/C Cathode Materials, Zhi-Yuan Tang, Wei Yuan, Ji Yan, Wen-Feng Mao, Li Ma
Journal of Electrochemistry
The molybdenum-doped Li3V2-xMox(PO4)3/C (x = 0.01, 0.02 and 0.03) cathode materials were prepared with a sol-gel method by using Li2CO3, NH4H2PO4, V2O5 and MoO3 as raw materials, and citric acid as both chelating reagent and carbon source. The X-ray diffraction (XRD) analyses showed that the crystal structure of as-prepared samples is monoclinic with space group P21/n. Scanning electron microscopy (SEM) observations indicated the uniform morphology for Li3Mo0.02V1.98(PO4) …
Synthesis And Electrochemical Properties Of Lifeso4F/Graphene Composite As Cathode Material For Lithium-Ion Batteries, Wei Guo, Ya-Xia Yin, Li-Jun Wan, Yu-Guo Guo
Synthesis And Electrochemical Properties Of Lifeso4F/Graphene Composite As Cathode Material For Lithium-Ion Batteries, Wei Guo, Ya-Xia Yin, Li-Jun Wan, Yu-Guo Guo
Journal of Electrochemistry
The LiFeSO4F was successfully synthesized from the reactions of FeSO4∙xH2O (x=1, 4, 7) with LiF in tetraethylene glycol media through a facile low temperature method. The structures and microscopic features of the products were characterized by XRD, SEM and TEM. TGA result shows the good thermal stability of the as-prepared LiFeSO4F. No diffraction peaks of the FeSO4 are observed in the as-prepared products with the starting material of either FeSO4∙4H2O or FeSO4∙7H2O, which should be ascribed to delaying the release of H2 …
Catalytic Activities Of Electrochemically Dealloyed Pt(Pd)-Cu Catalysts For Oxygen Reduction Reaction, Rui-Zhi Yang, Strasser Peter, Toney Michael
Catalytic Activities Of Electrochemically Dealloyed Pt(Pd)-Cu Catalysts For Oxygen Reduction Reaction, Rui-Zhi Yang, Strasser Peter, Toney Michael
Journal of Electrochemistry
The electrochemically dealloyed Pt(Pd)-Cu catalysts were prepared by electrochemical dealloying of Cu3Pt(Pd) and their catalytic activities toward oxygen reduction reaction (ORR) were studied in 0.1 mol·L-1 HClO4 . solutions. The structural features of the dealloyed Pt(Pd)-Cu were revealed by synchrotron-based anomalous X-ray diffraction (AXRD) and surface X-ray scattering (SXS) at an atomic scale. We established a relationship between the structure and the catalytic activity by comparing the ORR activity and the structure of dealloyed Cu3Pt nanoparticles with similarly dealloyed Cu3Pt thin films and Cu3Pt(111). The enhancement in the activity of …
Electrocatalytic Oxidation Of Ethanol On Ni-P-Tio2 Composite Coating Electrodes, Guang-Hui Hu, Hai-Xia Zeng, Zhi-Gang Wei, Zhan-Chang Pan, Shu-Guang Xie, Yan-Di Zou
Electrocatalytic Oxidation Of Ethanol On Ni-P-Tio2 Composite Coating Electrodes, Guang-Hui Hu, Hai-Xia Zeng, Zhi-Gang Wei, Zhan-Chang Pan, Shu-Guang Xie, Yan-Di Zou
Journal of Electrochemistry
The Ni-P-TiO2 composite coating electrodes with different contents of TiO2 particulates were prepared by electroless plating technique from Ni-P plating bath containing TiO2 powders on brass. Cyclic voltammetry, linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS) were used to test the electrochemical performance of Ni-P-TiO2/Cu electrodes. It was indicated that the Ni-P-TiO2/Cu electrodes exhibited very strong electrocatalytic activity toward the oxidation of ethanol in alkaline medium at ambient temperature. The electrocatalytic activity of ethanol oxidation on the Ni-P-TiO2 electrodes depended on the amounts of TiO2 in the coatings. The …
NaXMYFe(Cn)6(M=Fe, Co, Ni): A New Class Of Cathode Materials For Sodium Ion Batteries, Jiang-Feng Qian, Min Zhou, Yu-Liang Cao, Han-Xi Yang
NaXMYFe(Cn)6(M=Fe, Co, Ni): A New Class Of Cathode Materials For Sodium Ion Batteries, Jiang-Feng Qian, Min Zhou, Yu-Liang Cao, Han-Xi Yang
Journal of Electrochemistry
Three types of Prussian blue compounds, NaxMyFe(CN)6 (M = Fe, Co, Ni), were prepared simply by solution precipitation method and tested as cathode materials for sodium-ion batteries. X-ray diffraction and SEM measurements demonstrated that the prepared materials, namely, NaFeFe(CN)6, Na2CoFe(CN)6, and Na2NiFe(CN)6, exhibited a perfect cubic structure with a particle size of several tens nanometers. Cyclic voltammetric and galvanostatic cycling tests revealed very different electrochemical behaviors of these three materials. The specific capacities of NaFeFe(CN)6 and Na2CoFe(CN)6 could reach 113 mAh·g …
Synthesis Of Lini0.5Co0.2Mn0.3O2 For Lithium Ion Batteries And The Mechanism Of Capacity Fading At High Temperature, Wen Liu, Miao Wang, Ji-Tao Chen, Xin-Xiang Zhang, Heng-Hui Zhou
Synthesis Of Lini0.5Co0.2Mn0.3O2 For Lithium Ion Batteries And The Mechanism Of Capacity Fading At High Temperature, Wen Liu, Miao Wang, Ji-Tao Chen, Xin-Xiang Zhang, Heng-Hui Zhou
Journal of Electrochemistry
The Ni-rich cathode materials, LiNi0.5Co0.2Mn0.3O2, have been synthesized by Co-precipitation and high-temperature solid-phase sintering method. Constant current charge-discharge tests showed high discharge capacity of 179.2 mAh·g-1 in the 3.0~4.4 V at 0.2C. However, at 55 °C the LiNi0.5Co0.2Mn0.3O2 experienced the dramatic capacity fading after 100 charge-discharge cycles. Electrochemical Impedance Spectroscopy, X-Ray Photoelectron Spectroscopy, Atomic Emission Spectroscopy have been employed to study the capacity fading mechanism of LiNi0.5Co0.2Mn0.3O2 cycled at high temperature in range of high-voltage charge and …
Electrochemical Performances Of Carbon-Coated Na2Ti6O13 Nanotubes, Guo-Ran Li, Shuai Sun, Xue-Ping Gao
Electrochemical Performances Of Carbon-Coated Na2Ti6O13 Nanotubes, Guo-Ran Li, Shuai Sun, Xue-Ping Gao
Journal of Electrochemistry
With rutile TiO2 and NaOH as starting materials, the Na2Ti6O13 nanotubes were prepared by a hydrothermal reaction. The carbon-coated Na2Ti6O13 nanotubes were obtained by treating the Na2Ti6O13 nanotubes for 4 h in glucose aqueous solutions containing 0.1 mol·L-1 NaOH. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microcopy (TEM). The results showed that the dimensions of carbon-coated Na2Ti6O13 nanotubes were 14 ~ 19 nm of outer diameter, 2 ~ 5 …
Synthesis And Electrochemical Properties Of Yttrium-Doped Lini0.49Mn1.49Y0.02O4, Xian-Wen Zhang, Zheng-Xi Zhang, Li Yang, Shao-Hua Fang, Long Qu
Synthesis And Electrochemical Properties Of Yttrium-Doped Lini0.49Mn1.49Y0.02O4, Xian-Wen Zhang, Zheng-Xi Zhang, Li Yang, Shao-Hua Fang, Long Qu
Journal of Electrochemistry
The LiNi0.49Mn1.49Y0.02O4 cathode material was synthesized using the citric acid-assisted sol-gel method by partial substitutions of Ni and Mn with Y in the LiNi0.5Mn1.5O4 material. The influences of Y doping on the structure and electrochemical properties were investigated by means of X-ray diffraction, cyclic voltammetry, galvanostatic charge/discharge tests and AC impedance spectroscopy. The results showed that the introduction of Y into the LiNi0.5Mn1.5O4 greatly improved the cycle performance and rate capability. When the charge and discharge current was 1 C in the potential …
Template-Free Synthesis Of Porous Nio Hierarchical Structure For High Performance Supercapacitors, Yun Huang, Zhong Wu, Xin-Bo Zhang
Template-Free Synthesis Of Porous Nio Hierarchical Structure For High Performance Supercapacitors, Yun Huang, Zhong Wu, Xin-Bo Zhang
Journal of Electrochemistry
A facile and template-free hydrothermal method is proposed to successfully synthesize porous NiO hierarchical structure, which is found to be assembled from ultrathin NiO nanosheets. As for electrochemical pseudocapacitor application, the obtained material exhibits not only high specific capacitances of 435 F·g-1 at 20 mV·s-1 and 367 F·g-1 at 10 A·g-1, but also holds a good electrochemical stability over 1000 cycles at a current rate of 20 mV·s-1. These results suggest that the hierarchical structured porous NiO is a promising supercapacitor electrode material.
Electrochemical Reduction Of Co2 On Sn/Cu Electrodes, Chen-Chen Zhao, Jian-Wei Guo, Li Wang, Xiang-Ming He, Cheng Wang, Zhi-Xiang Liu
Electrochemical Reduction Of Co2 On Sn/Cu Electrodes, Chen-Chen Zhao, Jian-Wei Guo, Li Wang, Xiang-Ming He, Cheng Wang, Zhi-Xiang Liu
Journal of Electrochemistry
The Sn/Cu electrodes were prepared by electroplating method and their morphologies under different galvanization current densities were determined by SEM. In alkali, the effects of Sn/Cu electrodes on the activities towards hydrogen evolution and electrochemical reduction of CO2 were investigated in alkaline solutions using a three-electrode system. These results indicated that the Sn/Cu electrodes prepared at 10 mA/cm2 and 15 mA/cm2 showed good activities, while that prepared at 15 mA/cm2 was even better in activities. The synergetic structure of the Sn/Cu electrode to be beneficial to electrochemical reduction of CO2 has been pointed out.
Electrochemical Properties Of The Keggin-Type Lacunary Heteropolysilicate Anion And Its Eectrocatalysis For H2O2 Reduction, Xi-Long Liu, Chun-Yan Wu, Fang Zhou, Hong-Sheng Liu, Ying-Jie Hua, Chong-Tai Wang, Xiao-Yang Liu
Electrochemical Properties Of The Keggin-Type Lacunary Heteropolysilicate Anion And Its Eectrocatalysis For H2O2 Reduction, Xi-Long Liu, Chun-Yan Wu, Fang Zhou, Hong-Sheng Liu, Ying-Jie Hua, Chong-Tai Wang, Xiao-Yang Liu
Journal of Electrochemistry
Electrochemical properties of the Keggin-type lacunary heteropolysilicate anion SiW11O398- (SiW11) and its indirect electrocatalysis for H2O2 reduction in the supporting electrolyte containing 0.1 mol·L-1 NaHSO4 and Na2SO4 solutions were investigated using cyclic voltammetry, square wave voltammetry and alternating current impedance spectroscopy. Experimental results indicated that SiW11 showed two pairs of reversible redox waves on the glassy carbon (GC) electrode in an acidic solution. The electron transfer number corresponding to the two pairs of waves was one, and the proton transfer number involved was two during …
The Electrocatalytic Study Of Licoo2 In Air Electrode For Lithium-Air, Jun Gao, Wei Wu, Yan-Yan Tian, Yong Yang
The Electrocatalytic Study Of Licoo2 In Air Electrode For Lithium-Air, Jun Gao, Wei Wu, Yan-Yan Tian, Yong Yang
Journal of Electrochemistry
The LiCoO2 has been investigated as a new electrocatalyst for air electrodes using homemade lithium-air battery. The electrochemical performance and structural changes of the LiCoO2 based composite air electrodes have been studied. The results of CV, XRD and charge-discharge tests show that the composite air electrodes composed of LiCoO2 can greatly improve the discharge performance of lithium-air batteries. In particular when the composite air electrodes are charged to 4.1 V before further discharging, the obvious catalytic effects of LiCoO2 are attributed to higher valence state of the Co element in LiCoO2, esp. at charged …
Dissolved Oxygen Seawater Battery With Electrochemical Capacitance, Hai-Bo Xu, Yong-Hong Lu, Wei Zhang, Yan-Ting Yu, Chuan-Wei Yan, Ya-Ping Sun, Lian Zhong, Jian-Guo Liu, Yi Zheng, Bing Han, Yong-Liang Wang
Dissolved Oxygen Seawater Battery With Electrochemical Capacitance, Hai-Bo Xu, Yong-Hong Lu, Wei Zhang, Yan-Ting Yu, Chuan-Wei Yan, Ya-Ping Sun, Lian Zhong, Jian-Guo Liu, Yi Zheng, Bing Han, Yong-Liang Wang
Journal of Electrochemistry
A new concept of seawater battery with electrochemical capacitance (SWB-EC) has been proposed using carbon fibre brush (CFB) as the cathode material, and three testing prototypes have been made accordingly. The discharge performances of the CFB before- and after-oxidation and Mg alloy sacrifice anode were studied by cyclic voltammetry and constant current discharge tests under steady state conditions. Results show that the oxidized CFB exhibits the pseudo-capacitive characteristic and its activity of oxygen reduction reaction (ORR) in stirred seawater highly increases, comparing with the non-oxidized CFB. The open circuit potential of Mg alloy sacrifice anode is -1.74 V, having the …
Progress And Perspective Of Fuel Cell Technology, Ming Hou, Bao-Lian Yi
Progress And Perspective Of Fuel Cell Technology, Ming Hou, Bao-Lian Yi
Journal of Electrochemistry
Fuel cell, a clean and high-efficiency electrochemical power source, has being paid much attention worldwide recent years. In this paper, the progress and perspective of fuel cell technology are elucidated in detail. Fuel cells have been applied in some special fields such as spacecraft, shuttle and submarines. However, in the areas of transportation, stationary station and portable power source, fuel cells are still under demonstration due to the durability and cost problems. The reliability and surrounding survivability of fuel cells should be enhanced in the special application. Meanwhile, the durability and cost of fuel cells are the main issues to …
Preparation And Electrochemical Performance Of Lifepo4/C By Spray Drying Method Assisted With Organic Template, Quan-Bing Liu, Yang-Mei Jiang, Hui-Yu Song, Shi-Jun Liao
Preparation And Electrochemical Performance Of Lifepo4/C By Spray Drying Method Assisted With Organic Template, Quan-Bing Liu, Yang-Mei Jiang, Hui-Yu Song, Shi-Jun Liao
Journal of Electrochemistry
In this work, the LiFePO4/C composites were prepared by the spray drying and carbothermal method, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge-discharge measurements. The effects of the organic assisted templates on the morphologies and electrochemical properties of the LiFePO4/C composites were investigated. The results showed that the morphology and microstructure of the composites could be tuned by incorporating with the different templates. The morphology of the composite appeared to be solid microspheres if no organic template was added, while porous microspheres, nest-like …
Synthesis And Electrochemical Performance Of Xlifepo4·Yli3V2(Po4)3 Composites, Ping-Ping Ma, Zhi-Jian Liu, Jian-Hua Xia, Yu Chen, Pu Hu, Zhi-Chao Lu, Ding-Guo Xia
Synthesis And Electrochemical Performance Of Xlifepo4·Yli3V2(Po4)3 Composites, Ping-Ping Ma, Zhi-Jian Liu, Jian-Hua Xia, Yu Chen, Pu Hu, Zhi-Chao Lu, Ding-Guo Xia
Journal of Electrochemistry
A series of xLiFePO4·yLi3V2(PO4)3 composites were systematically synthesized through solid state reactions by variations in the proportions of LiFePO4 and Li3V2(PO4)3. The properties of the prepared compounds were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical measurements. The capacity of 162.7 mAh/g at 0.2 C rate was obtained with the relatively good cycle stability and good conductivity for 0.95LiFePO4·0.05Li3V2(PO4)3 due to more uniformed distributed and smaller particle sizes.
Preparation And Characterization Of Mno/Tin Anode For Lithium Ion Batteries, Gao-Jie Xu, Hai-Yan Yang, Peng-Xian Han, Li-Xue Zhang, Ke-Jun Zhang, Chuan-Jian Zhang, Yu-Hua Fan, Cai-Feng Bi, Guang-Lei Cui
Preparation And Characterization Of Mno/Tin Anode For Lithium Ion Batteries, Gao-Jie Xu, Hai-Yan Yang, Peng-Xian Han, Li-Xue Zhang, Ke-Jun Zhang, Chuan-Jian Zhang, Yu-Hua Fan, Cai-Feng Bi, Guang-Lei Cui
Journal of Electrochemistry
Manganese titanate (MnTiO3) powder was prepared via a sol-gel method using manganese acetate and tetrabutyl titanate as raw materials, and citric acid as a chelating agent. Through high temperature nitridation of MnTiO3 powder in ammonia, the MnO/TiN composite was obtained. The phase structure, composition and morphology of the composites were characterized by XRD, SEM and EDS. The electrochemical properties of the composite electrodes were studied by performing cyclic voltammetry, galvanostatic charge and discharge, and electrochemical impedance spectroscopy tests. The MnO/TiN electrode delivered specific capacities of 394 mAh·g-1 and 146 mAh·g-1 at the current density of …
Preparation And Application Of Nano-Nio As Anode In Lithium-Ion Batteries, Cheng-Dong Bai, Jia-Jia Chen, Qi Zhang, Ming-Sen Zheng, Quan-Feng Dong
Preparation And Application Of Nano-Nio As Anode In Lithium-Ion Batteries, Cheng-Dong Bai, Jia-Jia Chen, Qi Zhang, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
In this work, the nano-NiO material was prepared by hydrothermal method. The surface morphologies and electrochemical properties of nano-NiO material were investigated. The special nano-NiO material with porous surface assembling honeycombs(100-200nm) was obtained by using surface active agents. The discharge capacity of nano-NiO electrode up to 2385.7 mAh/g was achieved at current density of 0.1A/g in the first circle,while 1100mAh/g could be maintained after 100 circles. At current density of 2.0A/g, the discharge capacity of 600 mAh/g was obtained. And when the current density was reduced to 0.1A/g, the discharge capacity was restored to 1050 mAh/g. The nano-NiO electrode exhibited …
Microemulsion Preparation And Electrochemical Characterization Of Pt/C, Ptir/C Electrocatalysts, Ya-Ping Zeng, Sheng Sui
Microemulsion Preparation And Electrochemical Characterization Of Pt/C, Ptir/C Electrocatalysts, Ya-Ping Zeng, Sheng Sui
Journal of Electrochemistry
The Pt/C electrocatalysts were prepared by three different systems and the PtIr/C electrocatalysts were prepared with four different Ir contents. The samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), cyclic voltammetry (CV), potentiostatic and potentiodynamic polarizations measurements. The experimental results confirmed that the electrocatalyst particles prepared by the microemulsion method were well distributed on XC-72R supports with the active particle sizes of 5～10nm and good electrocatalysts activity. The Pt85Ir15/C electrocatalysts showed the highest overall electrochemical activity in unitized regenerative fuel cell.
Preparation And Characterization Of Casno3 Anode Material For Lithium Ion Batteries, Ran Sun, Zi-Geng Liu, Ya-Qi Jiang
Preparation And Characterization Of Casno3 Anode Material For Lithium Ion Batteries, Ran Sun, Zi-Geng Liu, Ya-Qi Jiang
Journal of Electrochemistry
In this study the precursor CaSn(OH)6 was prepared via a hydrothermal process, and its composition, surface feature and phase-transition were characterized by XRD, SEM and DSC-TGA. The shapes of CaSn(OH)6 crystals were effectively controlled by adjusting the volumn ratio of H2O and CH3CH2OH solvents. Perovskite CaSnO3 could be obtained by calcination of CaSn(OH)6 at 800 ℃. The reversible capacity of 334.4 mAh/g with good cycling stability could be achieved with the CaSnO3 electrode.
Preparation And Characterization Of The Lani0.6Fe0.4O3-δ Cathode For Intermediate Temperature Solid Oxide Fuel Cell, Hang Liu, Bo Huang, Xin-Jian Zhu
Preparation And Characterization Of The Lani0.6Fe0.4O3-δ Cathode For Intermediate Temperature Solid Oxide Fuel Cell, Hang Liu, Bo Huang, Xin-Jian Zhu
Journal of Electrochemistry
The LaNi0.6Fe0.4O3-δ as cathode material for intermediate temperature solid oxide fuel cell was prepared using a combustion synthesis technique. The X-ray diffraction (XRD) pattern showed that the single-phase LaNi0.6Fe0.4O3-δ perovskite could be obtained after heat treatment at 600°C. The TEM and SEM images of the synthesized powders revealed that the grains were 50-100nm. According to the electrochemical impedance spectra (EIS), the polarization resistance of the symmetric cell LaNi0.6Fe0.4O3-δ/ScSZ/LaNi0.6Fe0.4O3-δ sintered at 1050°C was the smallest (0.70Ω·cm2, 0.27Ω·cm2 …