Physical Chemistry Commons^™

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Making And Breaking Bonds: Studying Intrinsic Chemistry In The Gas-Phase, Luke Metzler

Electronic Theses and Dissertations

The nature of chemical interactions can be difficult to ascertain in the condensed phase; chemistry can be observed, but with the plethora of variables such as solvation, mixes of counter-ions, and complex equilibria, the true intrinsic chemical properties of a given chemical species may be obfuscated. By conducting research in the gas-phase, many of these variables can be reduced, if not eliminated entirely, which can allow for the careful observation of the true physical phenomena driving chemical reactivity.

The research presented herein focuses on the use of ion-trapping (specifically in a linear ion trap) as a method for unveiling the …

First Announcement Of 76th Annual Meeting Of The International Society Of Electrochemistry, International Society Of Electrochemistry (Ise)

Journal of Electrochemistry

No abstract provided.

Tribocorrosion And Metal Release From Austenitic Stainless Steels 304 And 201 In Simulated Cassava Food Contact, Robert Addai, Temitope E. Olowoyo, Thalia E. Standish, Jeffrey Daniel Henderson, Ubong Eduok, Yolanda Hedberg

Chemistry Publications

Cassava is the third most significant calorie source in the tropics. Its processing has changed from traditional methods to stainless steel processing machines. This study investigated the influence of cassava on metal release from two common stainless steels, ASTM 304 and 201, with and without friction, and on tribocorrosion (multianalytically) of 304. Cassava was relatively corrosive and hindered repassivation of the surface oxide of stainless steel, but it also acted as a lubricant against mechanical friction. The combined action of friction and cassava caused a significant increase in iron, chromium, nickel, and manganese release from the stainless steels (30–35- fold …

In Situ Diffuse Reflectance Spectroelectrochemistry Of Cathode Materials In Lithium-Ion Batteries, Lu-Lu Chen, Hao-Ran Li, Wei-Yi Liu, Wei Wang

Journal of Electrochemistry

Developing in situ spectroelectrochemistry methods, which can provide detailed information about species transformation during electrochemical reactions, is very important for studying electrode reaction mechanisms and improving battery performance. Studying real-time changes in the surface of electrode materials during normal operation can be an effective way to assess and optimize the practical performance of electrode materials, thus, in situ and in operando characterization techniques are particularly important. However, batteries are hard to be studied by in situ characterization measurements due to their hermetically sealed shells, and there is still much room for battery characterizations. In this work, a specially designed battery …

The Investigation Of The Reaction Of 2,3-Dimethylfuran With O(³P) And The Estimate Of The Photoionization Cross Section Of C-Cl And Absolute Photoionization Cross Sections Of Chlorinated Organic Compounds, Yilan Lori Chen

Master's Theses

The work presented in this thesis focuses on gas-phase reactions, which are fundamental for reducing greenhouse gas emissions and mitigating climate change. The experiments are performed at the Advanced Light Source (ALS) of Lawrence Berkeley National Laboratory, where there is a time-of-flight mass spectrometer coupled with tunable synchrotron radiation at Beamline 9.0.2 to collect high-quality data.

Chapter 1 details the background and purpose of each project, along with an overview of the origins of synchrotron radiation and time-of-flight mass spectrometry. The adaptation of biofuels is a way to minimize carbon emission and air pollutants, so research surrounding the reaction dynamics …

Electrochemical Advanced Treatment Of Desulfurization Wastewater From Coal-Fired Power Plants, Ju-Cai Wei, Juan Yi, Xu Wu

Journal of Electrochemistry

Zero-emission of desulfurization wastewater is one of the main demands for coal-fired power plants. As typical high salinity wastewater, it is hard to purify the desulfurization wastewater from coal-fired power plants through traditional physicochemical treatment or biochemical treatment, e.g., COD and Cl^–. A high concentration of Cl^– ion in desulfurization wastewater restricts wastewater reuse and zero-emission. Electrochemical technology is an attractive method for high salinity wastewater zero-emission, which provides a versatile, efficient, cost-effective, easily automatable, and clean industrial process. For advanced treatment of effluent after triple box process treatment in power plants, this paper reports an electrochemical …

The Determination Of Pzc And Differential Capacitance Curve Of Platinum-Alkaline Polymer Electrolyte Interfaces, Chen-Xi Liu, Ze-Ping Zou, Mei-Xue Hu, Yu Ding, Yu Gu, Shuai Liu, Wen-Jing Nan, Yi-Chang Ma, Zhao-Bin Chen, Dong-Ping Zhan, Qiu-Gen Zhang, Lin Zhuang, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Alkaline polymer electrolyte (APE) is the core component of modern alkaline hydrogen and oxygen fuel cells, and its single ion conductor nature makes the "electrode/APE" interfaces different from the conventional "electrode/solution" interfaces in terms of ion distribution, electrical double layer structure and polarization behavior. Due to the complexity of the APE and the associated solid-solid interfaces, fundamental investigations are challenging and deeper understanding of the structures and properties of such interfaces is in the infant stage. In this work, we aim to investigate the double layer structure from the aspects of differential capacitance curve and potential of zero charge (PZC) …

Micropatterning And Functionalization Of Single Layer Graphene: Tuning Its Electron Transport Properties, Miao-Miao Cui, Lian-Huan Han, Lan-Ping Zeng, Jia-Yao Guo, Wei-Ying Song, Chuan Liu, Yuan-Fei Wu, Shi-Yi Luo, Yun-Hua Liu, Dong-Ping Zhan

Journal of Electrochemistry

As a promising 2D material, graphene exhibits excellent physical properties including single-atom-scale thickness and remarkably high charge carrier mobility. However, its semi-metallic nature with a zero bandgap poses challenges for its application in high-performance field-effect transistors (FETs). In order to overcome these limitations, various approaches have been explored to modulate graphene's bandgap, including nanoscale confinement, external field induction, doping, and chemical micropatterning. Nevertheless, the stability and controllability still need to be improved. In this study, we propose a feasible method that combines electrochemical bromination and photolithography to precisely tune the electron transport properties of single layer graphene (SLG). Through this …

Automated Workflow For Redox Potentials And Acidity Constants Calculations From Machine Learning Molecular Dynamics, Feng Wang, Jun Cheng

Journal of Electrochemistry

Redox potentials and acidity constants are key properties for evaluating the performance of energy materials. To achieve computational design of new generation of energy materials with higher performances, computing redox potentials and acidity constants with computational chemistry have attracted lots of attention. However, many works are done by using implicit solvation models, which is difficult to be applied to complex solvation environments due to hard parameterization. Recently, ab initio molecular dynamics (AIMD) has been applied to investigate real electrolytes with complex solvation. Furthermore, AIMD based free energy calculation methods have been established to calculate these physical chemical properties accurately. However, …

Measurements Of Rate Constant For Electrode Reactions, Lian-Huan Han, Jia-Yao Guo, Miao-Miao Cui

Journal of Electrochemistry

Standard electron-transfer rate constant is one of the intrinsic properties for an electrochemical reaction, which is significant in the study of electrode kinetics. It is a key criterion for one to clarify the mechanism and pathway of a specific electrochemical reaction, and to screening and design the electrocatalysts and battery materials. Herein, we will introduce the measuring methods of rate constant for electrode reactions, including polarization curve, rotating disk electrode, ultramicroelectrode, scanning electrochemical microscopy, electrochemical impedance spectroscopy, current step, potential step and cyclic voltammetry, etc., to provide a guide to investigate electrode kinetics for graduate students and researchers in the …

Monodispersed Cu-Tcpp/Cu2O Hybrid Microspheres: A Superior Cascade Electrocatalyst Toward Co2 Reduction To C2 Products, Zi-Xuan Wan, Aidar Kuchkaev, Dmitry Yakhvarov, Xiong-Wu Kang

Journal of Electrochemistry

The electrochemical conversion of carbon dioxide (CO₂) into valuable chemicals is a feasible way to mitigate the negative impacts of overmuch CO₂ emissions. Porphyrin-based metal organic frameworks (MOFs) are expected to be used for selective and efficient electrochemical CO₂ reduction (ECR) with porous structure and ordered active sites. Herein, we report the synthesis of a monodispersed and spherical organic/inorganic hybrid Cu-TCPP@Cu₂O electrocatalyst composed of Cu-TCPP (TCPP=tetrakis (4-carboxyphenyl) porphyrin) and Cu₂O, where TCPP plays significant roles in regulating the morphology. In-situ formed Cu during ECR process in combination with Cu-TCPP (Cu-TCPP@Cu) can suppress …

Solution Combustion Synthesis And Characterization Of Fumarolic Mineral Dolerophanite, Copper (Ii) Oxide Sulfate, Eric J. Cyganowski

Chemistry & Biochemistry Theses - Archive

Dolerophanite Cu₂OSO₄ is a rare mineral found almost exclusively in the fumaroles of volcano systems and is sensitive to temperature and humidity conditions. It has a monoclinic C2/m crystal structure characterized by two-dimensional layers composed of sulfate anions dispersed amongst copper (II) oxide backbones. There has been recent interest in dolerophanite due to the magnetic properties of its Kagome-like lattice as well as its potential use as a photocatalyst or Li-ion battery electrode. Literature on the material however has been limited by the available synthesis strategies. As such, this thesis work presents a novel strategy …

Investigating The Ultrafast Dissociation Dynamics Of Energetic Materials Using Femtosecond Time-Resolved Mass Spectrometry, Jacob M. Shusterman

Theses and Dissertations

Shock initiation of energetic materials produces cations and anions that can contribute to initial endothermic chemical reactions which lead to detonation. Hence, knowledge of the initial dissociation pathways of ionized energetic molecules is important for advancing the understanding of initiation mechanisms and meeting longstanding goals of the Department of Defense. Despite their potential importance, these transient charged species are difficult to detect in detonation experiments and are often ignored in molecular dynamics modeling of shocked energetic materials. However, the technique of pump-probe femtosecond time-resolved mass spectrometry (FTRMS) paired with complementary theoretical calculations can be used to elucidate initial unimolecular dissociation …

Experimental And Chemical Modeling Of Applied Dc Electric Field Induced H2 – Air Axisymmetric Laminar Co-Flow Diffusion Flames With Low Carbon Impurities, Susith Dilshan Pathmasiri Gunamuni Halowitage

Graduate Theses, Dissertations, and Problem Reports (ETD)

The effect of externally applied DC electric fields on flame structure was investigated in a stationary atmospheric axisymmetric laminar H₂–Air flame with less than 100 ppm carbon equivalent impurities. Flame OH chemiluminescence signals were recorded using a UV-sensitive CCD array as a function of voltage (+10 to -10 kV) applied to a stainless-steel ring electrode placed around the burner nozzle. Changes in chemiluminescence signal are reported as a function of electrode height above the burner, airflow, and fuel composition. Significant changes in OH* distributions were observed for voltages below -5 kV. Under optimum conditions, the height of the …

Impacts Of Key Degradation Byproducts On Amine Scrubbing For Post-Combustion Carbon Capture, Thomas Jorgensen

Theses and Dissertations--Chemistry

The increasing atmospheric CO₂ concentration causes significant concern about global warming and its environmental impact. Industrial sectors, including power generation, transportation, and production factories, contribute most of the anthropogenic sources of CO₂ emissions. Researchers search for methods to mitigate these CO₂ emissions without compromising the benefits of industrial processes, including CO₂ capture, utilization, and sequestration (CCUS). Post-combustion carbon capture (PCCC) by amine scrubbing is the most technology ready CCUS, with various pilot-scale projects worldwide showing small-scale to fully operational plants. While researchers have made significant progress in amine scrubbing, they strive to improve the efficiency and …

Use Of Interlaboratory Studies For The Development Of Consensus-Based Criteria For The Elemental Analysis Of Electrical Tapes, Lacey M. Leatherland

Graduate Theses, Dissertations, and Problem Reports (ETD)

Tape evidence is often used in criminal cases involving violent crimes, kidnappings, improvised explosive devices (IEDs), and drug trafficking. This evidence can reveal potential links between suspects, items, or scenes. The forensic examination of electrical tape can provide investigative leads or offer support to alternative hypotheses evaluated in the courtroom. A conventional analytical scheme includes microscopic examination, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy Energy Dispersive Spectrometry (SEM-EDS), and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS). Elemental analysis of electrical tapes is commonly achieved using SEM-EDS; however, recent scientific literature suggests that this analysis can evolve from using SEM-EDS to …

Assessing The Performance Of Newly Developed Silica Nanoparticles Against Lead And Phosphate Ion Removal From Contaminated Solutions Using Adsorption Isotherm, Hasan Shamseddine, Nour Abi Aad, Rami Oweini, Ghassan Younes

BAU Journal - Science and Technology

This study investigates the removal of Lead and Phosphate ion from aqueous solution using new silica nanoparticles doped with europium (H1) which was characterized using Scanning Electron Microscopy (SEM), Dynamic Light Scattering (DLS), Fourier-transform Infrared Spectroscopy (FTIR). The aim of this research is to develop a novel adsorbent material that can efficiently remove contaminated ions from wastewater or aqueous solutions. The adsorption of lead and phosphate ion onto the silica nanoparticles is investigated, and the efficiency of this removal is evaluated. Equilibrium data analysis reveals linear fitting with Langmuir isotherm with 24.76 mg/g Lead ion uptake, while for phosphate the …

Intelligent Control Based On Bp Artificial Neural Network For Electrochemical Nitrate Removal, Xin-Wan Zhang, Guang-Yuan Meng, Li-Qiang Fang, Ding-Ming Chang, Tong Li, Jin-Wen Hu, Peng Chen, Yong-Di Liu, Le-Hua Zhang

Journal of Electrochemistry

Achieving effective control of parameters in the process of nitrate wastewater treatment is critical to electrochemical water treatment. The powerful nonlinear mapping ability, self-adaptation and self-learning ability of neural network technology can optimize the electrochemical processing. However, there are few researches in this direction. Hence, based on the test data of the electrochemical reduction of nitrate, an electrochemical prediction model was established by using the BP neural network algorithm. Considering the correlation of various parameters in the electrochemical process, the reaction time, initial nitrate nitrogen concentration, pH and current density were determined as the input layer of the BP neural …

Binding Interactions Of Biologically Relevant Molecules Studied Using Surface-Modified And Nanostructured Surfaces, Palak Sondhi

Dissertations

This research focuses on the field of surface nanobioscience, wherein different nanosurfaces that will be used as working electrodes in the electrochemical cell are manufactured and surface modified to understand the critical binding interactions between biologically significant molecules like proteins, carbohydrates, small drug molecules, and glycoproteins. This research is essential if we are to determine whether a synthetic molecule can serve as a therapeutic candidate or diagnose a disease in its early stages. In order to fully understand the binding interactions, the study begins with defining some of the fundamental concepts, principles, and analytical tools for biosensing.

Afterwards, we addressed …

Effects Of Traps On Photo-Induced Interfacial Charge Transfer Of Ag-Tio2: Photoelectrochemical, Electrochemical And Spectroscopic Characterizations, Zhi-Hao Liang, Jia-Zheng Wang, Dan Wang, Jian-Zhang Zhou, De-Yin Wu

Journal of Electrochemistry

In the field of metal-semiconductor composites based plasmon-mediated chemical reactions, a clear and in-depth understanding of charge transfer and recombination mechanisms is crucial for improving plasmonic photocatalytic efficiency. However, the plasmonic photocatalytic reactions at the solid-liquid interface of the electrochemical systems involve complex processes with multiple elementary steps, multiple time scales, and multiple controlling factors. Herein, the combination of photoelectrochemical and electrochemical as well as spectroscopic characterizations has been successfully used to study the effects of traps on the photo-induced interfacial charge transfer of silver-titanium dioxide (Ag-TiO₂). The results show that the increase of surface hydroxyl groups may …

Hydrodynamic Voltammetry Of Fe2+/3+ In Aqueous Deep Eutectic Solvents Towards Redox Flow Batteries, Desiree Mae Prado, Xiaochen Shen, Robert Savinell, Clemens Burda

Faculty Scholarship

Deep eutectic solvents (DESs) have recently attracted much attention as potential green electrolyte solvents for redox flow batteries. DESs are considered not only as environmentally sustainable but also economically attractive electrolytes because they can be resourced from biological feedstock (alcohols, urea, choline) and are earth-abundant and of low toxicity. Despite these advantages, DESs still have limitations in important aspects such as reactant and ion transport, which is inhibited due to hydrogen-bonding-induced viscosity. Thus, improving the transport properties of redox species in DESs is essential. In addition, we explore the quantitative addition of water to ethaline (a 1:2 choline chloride: ethylene …

On The Chemistry Of Aqueous Ammonium Acetate Droplets During Native Electrospray Ionization Mass Spectrometry, Lars Konermann, Zeyuan Liu, Yousef Haidar, Methew J. Willians, Nicholas A. Bainbridge

Chemistry Publications

Ammonium acetate (NH₄Ac) is a widely used solvent additive in native electrospray ionization (ESI) mass spectrometry. NH₄Ac can undergo proton transfer to form ammonia and acetic acid (NH₄⁺ + Ac^- → NH₃ + HAc). The volatility of these products ensures that electrosprayed ions are free of undesired adducts. NH₄Ac dissolution in water yields pH 7, providing “physiological” conditions. However, NH₄Ac is not a buffer at pH 7 because NH₄⁺ and Ac^- are not a conjugate acid/base pair (L. Konermann, J. Am. Soc. Mass Spectrom. 2017 …

Recent Advances In Electrochemical Impedance Spectroscopy-Based Pathogenic Bacteria Sensing, Tao Chen, Yuan-Hong Xu, Jing-Hong Li

Journal of Electrochemistry

Pathogenic bacteria have been throwing great threat on human health for thousands of years. Their real-time monitoring is in urgent need as it could effectively halt the spread of pathogenic bacteria and thus reducing the risk to human health. Up till now, diverse technologies such as electrochemistry, optics, piezoelectricity and calorimetry have been developed for bacteria sensing. Therein, electrochemical impedance spectroscopy (EIS)-based sensors show great potential in point-of-care bacterial analysis because of their low-cost, short read-out time, good reproducibility, and portable equipment construction. In this review, we will primarily summarize the typical applications of electrochemical impedance technology in bacteria sensing …

Metal-Organic Frameworks For Electrochemical And Electrochemiluminescent Immunoassay, Xiao-Li Qin, Zi-Ying Zhan, Sara Jahanghiri, Kenneth Chu, Cong-Yang Zhang, Zhi-Feng Ding

Journal of Electrochemistry

Development of ultrasensitive, highly accurate and selective immunosensors is significant for the early diagnosis, screening, and monitoring of diseases. Electrochemical and electrochemiluminescent (ECL) immunoassays have both attracted great attention and become a current research hotspot due to their advantages such as good stability, high sensitivity and selectivity, wide linear range, and good controllability. Metal-organic frameworks (MOFs), as a new class of porous crystalline materials, have been widely applied in electrochemical and ECL immunosensors owing to their large specific surface area, good chemical stability, as well as adjustable pore size and nanoscale framework structures. Various MOF nanomaterials with different properties for …

Preface To The Special Issue On Interfactial Regulation And Electrochemical Sensors, Jing-Hong Li, Yang Tian, Yuan-Hong Xu, Li-Min Zhang

Journal of Electrochemistry

No abstract provided.

Colorful "Stars" In The Dark, Chao Jing, Yi-Tao Long

Journal of Electrochemistry

Plasmonic nanoparticles such as Au and Ag with localized surface plasmon resonance (LSPR) property exhibit unique scattering and absorption features. The plasmonic scattering and absorption bands are mainly located at visible light region which can be easily applied in visual detections. By modulating the size, shape, and composition of gold and silver colloid solutions, plenty of colorimetric methods have been constructed for the detection of metal ions, biomolecules, and environmental contaminants, etc. For many years, the LSPR-based measurements are implemented in reagent tubes. Since 2000, the plasmon resonance scattering (PRS) light of metal nanoparticles captured by dark-field microscopy enables the …

Boronate Affinity-Assisted Electrochemically Controlled Atrp For Ultrasensitive Electrochemical Aptasensing Of Carcinoembryonic Antigen, Qiong Hu, Shi-Qi Li, Yi-Yi Liang, Wen-Xing Feng, Yi-Lin Luo, Xiao-Jing Cao, Li Niu

Journal of Electrochemistry

As an acidic glycoprotein, carcinoembryonic antigen (CEA) is of great value as a broad-spectrum tumor marker in the differential diagnosis and surveillance of malignant tumors. In this work, we report an electrochemical aptasensor for the ultrasensitive and highly selective detection of CEA, taking advantage of the dual amplification by the boronate affinity-assisted electrochemically controlled atom transfer radical polymerization (BA-eATRP). Specifically, the BA-eATRP-based electrochemical aptasensing of CEA involves the capture of target antigens by nucleic acid aptamers, the covalent crosslinking of ATRP initiators to CEA antigens via the selective interactions between the phenylboronic acid (PBA) group and the cis-diol group of …