Physical Chemistry Commons^™

Development Of Dehydrogenase-Based Bioanode Using Poly(Phenosafranin)-Functionalized Swcnt Nanocomposites And Its Application To Ethanol Biosensor, S. Saleh Farhana, Okajima Takeyoshi, Lanqun Mao, Takeo Ohsaka

Journal of Electrochemistry

A New type of dehydrogenase-based amperometric ethanol biosensor was constructed using alcohol dehydrogenase (ADH) which was immobilized on the edge-plane pyrolytic graphite (EPPG) electrode modified with poly(phenosafranin)-functionalized single-walled carbon nanotube (PPS-SWCNT). The PPS-SWCNT modified EPPG electrode was prepared by electropolymerization of phenosafranin on the EPPG electrode which was previously coated with SWCNT. The performance of the ADH/PPS-SWCNT/EPPG electrode was evaluated using cyclic voltammetry and amperometry in the presence of ethanol. The fabricated ethanol biosensor provided a reasonable sensitivity of 2.0 μA cm–2 mM–1 and a low detection limit (36 μM) for the electrocatalytic oxidation of ethanol with a linear concentration …

Preparations And Characters For Acetamiprid Of Molecular Imprinted Polymer Electrochemical Sensors, Bin Liu, Yong-Xing Huang, Hui-Ting Lian, Hong-Mei Wu

Journal of Electrochemistry

A novel molecularly imprinted membranes electrochemical sensor with good memory capacity to acetamiprid was developed. Based on electrodeposition technique, chitosan was deposited onto the surface of gold electrode as a functional polymer matrix along with aimed molecules acetamiprid and glutaraldehyde as a crosslinking agent. Cationic probe Ru(NH₃)₆Cl₃ was employed to indirectly investigate the electrochemical characteristics as well as the imprinted effect of the sensors. The results showed that the sensors had a specific recognition to acetamiprid compared to the structural similarity midacloprid and other pesticide. There is more sensitive response to acetamiprid at imprinted sensors …

Electrochemical Analysis Based On Molecular Recognition Of Nucleic Acids And Its Applications, Dian-Ming Zhou, Jian-Hui Jiang, Guo-Li Shen, Ru-Qin Yu

Journal of Electrochemistry

Nucleic acid as the carrier of genetic information and the functional molecules for molecular biology and bioanalytical chemistry has attracted increasing interest in electrochemical analysis. This review presents a brief outline of some electrochemical analytical assays based on molecular recognition of nucleic acids. Most of these methods are focused on the detection of nucleic acid sequence, genetic mutation and nucleic acids as functional molecules.

Fabrication Of Ito Micro-Pore Electrochemical Sensor And The Detection Of Exocytosis, Hui Zhao, Ling Li, Pin-Gang He, Yu-Zhi Fang

Journal of Electrochemistry

Exocytosis is one of the major means for cells to transmit messages. Amperometric detection of exocytosis is an important method in studying communication between cells. In this study a new type of ITO micro-pore electrochemical sensor was fabricated by means of ITO and UV light lithographic mask and was used in the detection of exocytosis with promising results. Compared with the conventional method, the ITO micro-pore sensor can not only replace the carbon fiber electrode, but be combined with fluorescent or chemiluminescent methods in detecting the physiological phenomena of cells.

Study On The Electrochemical Behaviors Of Gc Electrode Modified With Carbon Nanotube-Polyelectrolytes And Its Application For Rutin Detection, Liang Hua, Xia-Qin Wu, Rong Wang

Journal of Electrochemistry

The electrochemical behaviors of rutin and ascorbic acid at single-wall carbon nanotube and polyelectrolytes (dimethyl-diallylammonium chloride, PDDA) film modified glassy carbon electrode was investigated. The cyclic voltammetric results showed that electron transfer of rutin at PDDA/SWCNTs/GC modified electrode is an adsorption-controlled process. The separation of oxidation peak potentials of rutin and ascorbic acid was more than 200 mV. The rutin concentration in the presence of AA were detected by differential pulse voltammetry (DPV). The experimental results indicated that the PDDA/SWCNTs/GC modified electrode can be used for the detection of rutin in the presence of high concentration of AA. The DPV …

Synthesis, Extraction, Dissolution, And Voltammetry Of F-Species In A Room Temperature Ionic Liquid Solvent, Wendy Jacqueline Pemberton

UNLV Theses, Dissertations, Professional Papers, and Capstones

Room temperature ionic liquids (RTILs) are salts that are liquids from as low as -96 °C to up to 100 °C. RTILs are of high interest in many fields of study because of their negligible vapor pressure, high electrochemical stability, high conductivity, and wide electrochemical windows. These diverse solvents have recently been used in organic synthesis, as extraction solvents, and as electrochemical solvents. It is as a direct result of the multifunctional capabilities of these RTIL solvents that they are examined in this work. The ability to probe the chemistry of lanthanides and actinides is based on the unique properties …

Equilibrium Speciation Of Select Lanthanides In The Presence Of Acidic Ligands In Homo- And Heterogeneous Solutions, Troy Robinson

UNLV Theses, Dissertations, Professional Papers, and Capstones

This dissertation explores lanthanide speciation in liquid solution systems related to separation schemes involving the acidic ligands: bis(2-ethylhexyl) phosphoric acid (HDEHP), lactate, and 8-hydroxyquinoline. Equilibrium speciation of neodymium (Nd³⁺ ), sodium (Na⁺ ), HDEHP, water, and lactate in the TALSPEAK liquid-liquid extraction system was explored under varied Nd³⁺ loading of HDEHP in the organic phase and through extraction from aqueous HCl and lactate media. System speciation was probed through vapor pressure osmometry, visible and Fourier Transform Infrared (FTIR) spectroscopy, ²² Na and ¹³ C labeled lactate radiotracer distribution measurements, Karl Fischer titrations, and equilibrium pH measurements. Distribution …

Application Of Raman Spectroscopy To Lubricants, Lubricated Surfaces And Lubrication Phenomena, David W. Johnson

Chemistry Faculty Publications

Recent advances in lasers and detector technologies and the development of low-cost instruments and fiber-optic probes have brought about an explosion in the lubrication systems being studied by Raman spectroscopy. This article provides examples of the use of Raman spectroscopy in the study of lubrication phenomena, including the characterization of liquid lubricants, lubricant additives, and solid lubricants; the study of vapor-phase lubrication; and the use of coated nanoparticles as lubricants.

The Flip-Flop Behavior Of Acetonitrile At Au Electrode Surface Investigated By Sum Frequency Generation Vibrational Spectroscopy, Zhi Huang, Xin Tang, Gang-Hua Deng, En-Cai Zhou, Hong-Fei Wang, Yuan Guo

Journal of Electrochemistry

The electrochemical interface between liquid acetonitrile and polycrystal gold electrode is investigated by in situ infrared visible sum frequency generation spectroscopy (SFG-VS). The structure of acetonitrile adsorbed at polycrystal gold electrode surface is studied as a function of electrode potential. The SFG spectra of CH₃ group indicate acetonitrile orients in response to the electrode potential. The SFG signal of CH₃ group turns lower as the electrode potential changes from -700mV to 300mV, and vanishes around the 300mV(pzc), then becomes a negative signal above 500mV, which indicates that the orientation is predominately with the CH₃ group toward the …

Hairpin Locked Nucleic Acids Probe Based Electrochemical Biosensor For Detection Of Bcr/Abl Fusion Gene, Hong-Mei Wang, Li-Qing Lin, Shao-Huang Weng, Li-Man Wang, Yin-Huan Liu, Xin-Hua Lin

Journal of Electrochemistry

In this article, a new kind of structure hairpin LNA probe was designed to detect BCR/ABL fusion gene in Chronic Myelocytic Leukemia. The LNA probe was immobilized on the gold electrode(AuE) through sulfur–Au interaction to construct specific electrochemical biosensor. The electrochemical response of the sensor to hybridization of the LNA probe with the target DNA was studied using [Cu(R)₂]²⁺ as an electrochemical indicator. The optimal condition was discussed. The experimental results indicated that in pH 7.4 PBS buffer solution, this new method has excellent specificity for single base mismatch and complementary after hybridization. The relationship between the …

Detection Of Acute Promyelocytic Leukemia Pml/Rarî± Fusion Gene Using Graphene Modified Glassy Carbon Electrode, Zhi-Xian Lian, Guang-Xian Zhong, Kun Wang, Ai-Lin Liu, Xin-Hua Lin, Yuan-Zhong Chen

Journal of Electrochemistry

A graphene modified glassy carbon electrode (GCE) was prepared by electrochemical reduction of graphite oxide fixed on the surface of GCE. Then, the amino-group modified probe of acute promyelocytic leukemia (APL) PML/RARα fusion gene fragment was immobilized onto surface of the graphene modified GCE by coupling activating agent. With methylene blue (MB) as a novel electrochemical indicator, artificial APL PML/RARα fusion gene fragment was measured by differential pulse voltammetry (DPV). The result indicated graphene nanomaterial showed good sensitization on the signal of MB. The relationship between the reduction peak current of MB and the concentration of complementary strand was linear …

Electroless Silver Plating On The Cotton Fiber Modified With 3-Mercaptopropyltriethoxysilane, Li-Li Li, Wei Wang

Journal of Electrochemistry

This paper studies on the characteristics of the electroless silver plating cotton fiber modified with 3-mercaptopropyltriethoxysilane.The effects of each factors on surface resistance and rate of weight gain was tested by the method of orthogonal test. It is concluded that the optimal technology for preparing the silver plating cotton fiber:concentration of the 3-mercaptopropyltriethoxysilane 1%, modification time 120min, the bath ratio of modification 1:60,dosage of AgNO₃ 3.5g, dosage of C₆H₁₂O₆ 3.5g, plating temperature 50℃, plating time 60min. SEM and XRD analysis shows that the silver plating on the cotton fiber modified with mercapto is uniform …

Adsorbents With Chemically Bonded Saccharide Surfaces: Synthesis And Application For Stereoisomer Separation And The Synthesis Of Chiral Porous Silicas Using Templates Chiral Surfactant, Edwin Vega

Seton Hall University Dissertations and Theses (ETDs)

.

A Sodium Salt Of The Dimer Of Boronoterephthalic Acid Anhydride, Scott Simmons, Albert Fratini, Vladimir Benin

Chemistry Faculty Publications

The title compound, sodium bis­(6-carb­oxy-1-hy­droxy-3-oxo-1,3-dihydro-2,1-benzoxaborol-1-yl)oxidanium, Na+·C16H15B2O13-, was prepared in two steps from 2-bromo-p-xylene. Its crystal structure was determined at 140 K and has triclinic (P) symmetry. The compound presents a unique structural motif, including two units of the cyclic anhydride of boronoterephthalic acid, joined by a protonated, and thereby trivalent, oxonium center. Association in the crystal is realized by complementary hydrogen bonding of the carboxyl groups, as well as by coordination of the sodium cations to the oxygen centers on the five-membered rings.

Theoretical Investigation Of A Reported Antibiotic From The 'Miracle Tree' Moringa Oleifera, Michael Horwath, Vladimir Benin

Chemistry Faculty Publications

Moringa oleifera, sometimes called the “Miracle Tree,” has received international attention for its potential to improve health in impoverished tropical areas. In addition to high vitamin content in the leaves and pods, the tree contains compounds with antioxidant and antibacterial properties. This study focused on the theoretical investigation of the suggested structure of one antibacterial compound, “pterygospermin,” whose existence was proposed after some studies of the roots of M. oleifera. The structure of pterygospermin was first proposed by a research group working in the 1950s, but later studies have not found evidence of this compound and have instead …

Applications Of Raman Spectroscopy Technique In Lithium Ion Batteries, Liang Zhao, Yong-Sheng Hu, Hong Li, Zhao-Xiang Wang, Hong-Xing Xu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

The Raman spectroscopy has been widely used in the study of lithium ion batteries.In this short review,we gave some examples of the applications of Raman spectroscopy in the study of electrode materials including carbonaceous materials,spinel LiM_xMn_2-x O₄,LiFePO₄,as well as polymer electrolytes,room temperaturemolten salt electrolytes and the solid-electrolyte interphase layers.The advantages and disadvantages of the ex-situ and in-situ Raman spectrum techniques are discussed.Using new Raman techniques to investigate Li-ion batteries are suggested.

Determinations In Reducing Degree Of Iron-Amine Complex By Cyclic Voltammetry, Yu-Kun Lai, Wei Wang

Journal of Electrochemistry

The veracity and influence factors in reducing degree on iron-amine complex were tested by cyclic voltammetry.The types of cathode electrolytes including ferric nitrate,triethanolamine,sodium hydroxide and calcium nitrate were optimized.Compared with dip-dyeing coloration method,the cyclic voltammetry method can be used to measure the reducing degree of iron-amine complex more accurately with better stability,easier and faster operation.Potential applications of cyclic voltammetric determination method can be found in the fields of electrochemical dye production and related quality control.

Elastic Properties Of Poly(Vinyldene Fluoride) (Pvdf) Crystals: A Density Functional Theory Study, Yong Pei, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We computed structural and elastic properties of totally nine phases of poly(vinyldene fluoride) (PVDF) crystals using the density-functional theory (DFT) method with and without inclusion of the dispersion corrections. In addition to the four known crystalline forms, mechanic properties of five theoretically predicted crystalline forms of PVDF are also investigated. The all-trans form I_p exhibits the largest cohesive energy, bulk, and Young’s modulus among the nine crystalline forms. The DFT calculations suggest that the δ crystalline forms (III_au, III_pu, III_pd, and III_ad) possess poor chain rigidity among the nine PVDF …

Structure Evolution Of Gold Cluster Anions Between The Planar And Cage Structures By Isoelectronic Substitution: AuN− (N = 13–15) And MauN− (N = 12–14; M = Ag, Cu), Rhitankar Pal, Lei-Ming Wang, Wei Huang, Lai-Sheng Wang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

The structural and electronic effects of isoelectronic substitution by Ag and Cu atoms on gold cluster anions in the size range between 13 and 15 atoms are studied using a combination of photoelectron spectroscopy and first-principles density functional calculations. The most stable structures of the doped clusters are compared with those of the undoped Au clusters in the same size range. The joint experimental and theoretical study reveals a new C_3v symmetric isomer for Au₁₃ ⁻, which is present in the experiment, but has hitherto not been recognized. The global minima of Au₁₄ ⁻ and Au …

Chemical And Electronic Structure Of Surfaces And Interfaces In Compound Semiconductors, Sujitra Pookpanratana

UNLV Theses, Dissertations, Professional Papers, and Capstones

The interface formation between two different materials is important in applications for optoelectronic devices. Often, the success or performance of these devices is dependent on the formation of these heterojunctions. In this work, the surface and interfaces in such materials for optoelectronic devices are investigated by a suite of X-ray analytical techniques including X-ray photoelectron (XPS), X-ray excited Auger electron (XAES), and X-ray emission (XES) spectroscopies to provide novel insight.

For the group III-nitrides (e.g., AlxGa1-xN) used in many light emitting devices, a significant challenge exists to form an Ohmic contact. The electron affinities and band gaps of GaN and …

Electrochemical Detection For The Corrosion Of Reinforcing Steel In Concrete During Immersion And Drying Cycles, Bing-Li Jia, Fa-He Cao, An-Na Chen, Jian-Qing Zhang

Journal of Electrochemistry

The corrosion behavior of reinforcing steel in concrete under dry-wet cycle condition has been studied by electrochemical noise(EN) compared with the electrochemical impedance spectroscopy(EIS),SEM micrographs and EDS.The statistical method has been employed to analyze the EN data of reinforcing steel in concrete,which revealed three different corrosion stages of reinforcing steel in concrete,including the dissolution of the passive film,the active corrosion and the cumulation of corrosion product.The wavelet transform has also been employed,which indicated that steel in concrete with pH 1 is associated with uniform corrosion,while steel in concrete with pH 3 and pH 7 are associated with localized corrosion,such as …

Jahn-Teller Coupling And Fragmentation After Core-Shell Excitation Ini Cf4 Investigated By Partial-Ion-Yield Spectroscopy, Renaud Guillemin, Wayne C. Stolte, Maria Novella Piancastelli, Dennis W. Lindle

Chemistry and Biochemistry Faculty Research

We investigate fragmentation processes induced by core-level photoexcitation in CF4 at both the carbon and fluorine K edges by means of partial-ion-yield spectroscopy. The molecule CF₄ is a textbook example of systems in which Jahn-Teller coupling strongly manifests itself in the photoabsorption spectrum. Spectral features related to Jahn-Teller and quasi-Jahn-Teller splitting are observed, and important differences in the fragmentation pathways are revealed depending on the symmetries of the core-excited states. We interpret these experimental observations on the grounds of symmetry lowering from the Td to the C3v point group as well as preferential orientation with respect …

The Mechanism Of 13CoAd/12Co Isotope Exchange At Pt Electrode,A Combined Study By Electrochemical In-Situ Infrared Spectroscopy And Dipole-Dipole Coupling Analysis, Sang-Zi Liang, Shao-Xiong Liu, Ling-Wen Liao, Qian Tao, Jing Kang, Yan-Xia Chen

Journal of Electrochemistry

In this contribution,we have analyzed the IR spectra of saturated CO adlayer at rough Pt film electrode as a function of fractional surface coverage of ¹³CO_ad /¹²CO recorded during ¹³CO_ad /¹²CO isotope exchange process according to dipole-dipole coupling theory and coherent potential approximation. By properly choosing the parameters of adlayer structure and dipole-dipole coupling interaction under coherent potential approximation, we demonstrated that we can successfully simulate the IR spectra as a function of the surface coverage of CO adlayer at rough Pt film electrodes by assuming that CO_ad molecules with low …

An In Situ Fourier Transform Infrared Spectroelectrochemical Study On Alcohols Electrocatalytic Oxidation At Pd Electrode In Acidic Solution, Hai-Ping Huang, Lian-Qin Wang, Pei-Kang Shen

Journal of Electrochemistry

The methanol and ethylene glycol electrooxidation on palladium electrode in acidic solution has been investigated by cyclic voltammetry and in situ Fourier transform infrared spectroelectrochemistry. It shows that the oxidation of methanol and ethylene glycol at Pd electrode cannot proceed until over 1.5 V in acidic and neutral media. The overpotential decreases and the peak current density increases with the reduction in pH values. The formation of the oxygen-containing species significantly affects the alcohol oxidation on Pd electrode. The in situ FTIR spectroscopic measurements show that the oxidation products of ethylene glycol on Pd electrode are CO₂ and oxalic …

In-Situ Surface Enhanced Raman Scattering Electrochemical Investigation Of 4-Aminoantipyrine On Silver Electrode, Li-Jun Zhang, Wei Song, Ling Chen, Zong-Rang Zhang, Hai-Feng Yang

Journal of Electrochemistry

In this paper, 4-AAP was self-assembled on silver surface to form monolayers. Surface-enhanced Raman Spectroscopy (SERS) was used to in-situ investigate the adsorption mechanism of the 4-aminoantipyrine(4-AAP) on silver surface dependent on shifting potentials and the effect of solution pH. Based on density functional theory(DFT) calculation of vibration modes,approximate assignment of 4-AAP SERS spectrum was conducted. In situ SERS spectral electrochemical experiments indicated that the 4-AAP monolayers experience a dynamic adsorption process from a tilted fashion to a more vertical mode for benzene ring and more parallel for pyrine ring with the potential applied toward more negative voltages. The complete …

Phenomena Characterization Of Energy Materials By X-Ray Absorption Spectroscopy, Ming-Yao Cheng, Chun-Jen Pan, Ju-Hsiang Cheng, Bing-Joe Hwang

Journal of Electrochemistry

The aim of this review is to introduce the characterization of energy materials by X-ray absorption spectroscopy (XAS) . This technique allows us to probe changes in the valance state and the local environment of the targeted element in the active material; thereby,leading to a better understanding of its electrochemical behavior,and hopefully showing the way to improved performance. Here,electrocatalysts for fuel cells and active electrode materials for Li-ion batteries are taken as the examples that illustrate the capability of XAS and allow observation and theory to be correlated with electrochemical phenomena.

Comparative Study Of Nanoporous Pt, Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Aicheng Chen

Journal of Electrochemistry

In recent years much effort has been put towards developing efficient Pt-based electrocatalysts for applications in fuel cells. With the rising cost of precious metals such as Pt,the need to enhance the activity and to decrease the load of catalysts is prominent. Herein we report on the synthesis and comparative study of nanoporous Pt,PtRu and PtRuIr electrocatalysts. The nanoporous electrodes were fabricated using a hydrothermal method and characterized by scanning electron microscopy (SEM) ,energy dispersive spectroscopy (EDS) ,X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) . The electrocatalytic activity of the fabricated nanopo- rous materials was evaluated using both CO …

Electrochemical Surface-Enhanced Raman Spectroscopy—Current Status And Perspective, Bin Ren, Jian-Feng Li, Yi-Fan Huang, Zhi-Cong Zeng, Zhong-Qun Tian

Journal of Electrochemistry

Electrochemical interface is a very important interface closely related to various energy and life processes. Surface-enhanced Raman scattering was widely used in electrochemistry soon after its discovery to understand the surface bonding,configuration,and orientation of the surface species. In recent 10 years,the fast development of nanoscience and nanotechnology has offered SERS with abundant substrates and characterization methods,which has allowed impressive development of electrochemical SERS. This articles will follow the time line to make systematically overview of SERS on Au and Ag,thin-layer transition-metal SERS,pure transition metal SERS,core-shell SERS and those methods for studying single crystal surfaces,including gap-mode SERS, TERS and SHINERS. Emphasis …

Electrochemical Sers Studies On The Adsorption Of Benzoimidazole And Derivative In Nonaqueous Solution, Ya-Xian Yuan, Feng-Zhu Yang, Wei Liu, Ping-Jie Wei, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

The surface adsorption of benzoimidazole (BIMH) and 2-mercaptobenzimidazole(MBI) was investigated by electrochemical in-situ surface enhanced Raman spectroscopy (SERS) and direct electrochemical synthesis on Cu electrode. The influence of the neutral ligand of triphenylphosphine (pph₃) on the adsorption and surface coordination of BIMH and MBI were investigated respectively. BIMH interacted with metal surface by the neutral molecule to form chemical adlayer in the extremely negative potential,while it adsorbed onto metal surface through the N atoms to form a polymer film which may suppress the corrosion of the metal. The introduction of pph₃ destroyed the film formation of BIMH …

In Situ Surface-Enhanced Raman Scattering Spectroscopic Study Of Sulfur Adsorption On Polycrystalline Platinum Electrode Surface, Bolian Xu, In-Su Park, Ying Li, De-Jun Chen, Yuye J. Tong

Journal of Electrochemistry

The paper reports the first in situ surface enhanced Raman scattering (SERS) spectroelectrochemistry study of sulfur adsorption and electro-oxidation on highly roughened polycrystalline Pt surface in both acidic and basic supporting electrolytes. The SERS spectra were taken at a constant electrode potential after accumulative electro-oxidation CVs of the Pt electrode with pre-adsorbed sulfur species and at different electrode potentials that were varied stepwise of the Pt electrode immersed in sulfur-containing electrolytes without pre-adsorbed sulfur species. In both cases,a dominant vibrational band at 299 cm^-1 in acidic electrolyte but at 310 cm^-1 in basic electrolyte was observed,which was assigned …