Physical Chemistry Commons^™

In Situ Detection On Electrochemical Chloride Removal Of Reinforcement In Concrete By Combined Ph/Cl- Probes, Jing-Jing Wang, Shi-Gang Dong, Xiao-Juan Zhang, Hong-Wei Lv, Yun-Chang Wu, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

In this work, the concrete samples polluted by chloride ion were electrochemically treated using galvanostatic technique, and the distributions of chloride ion concentration and pH value in the polluted concretes were in-situ monitored by embedding a combined pH/Cl^- probe during the electrochemical chloride removal. The corrosion behaviors of reinforcing steel in the concrete were simultaneously studied by using linear polarization and electrochemical impedance spectroscopy techniques (EIS). The micro environment of the concrete and corrosion rate of steel were explored during the electrochemical chloride removal. It was indicated that the Cl^- concentration in the concrete pore solution decreased with …

Detection Of Glucosamine Hydrochloride By Ion Chromatography With Integrated Pulsed Amperometric Detector, Yan-Qun Fan, Qing-Yang Chen, Jin-Mei Xia, Jian-Zhong Xu, Xun Xu, Chen Xu

Journal of Electrochemistry

Factors (integral potential, concentration of NaOH and flow rate) affecting detection of Glucosamine hydrochloride by ion chromatography with integrated pulsed amperometric detector were studied. As the integral potential increased, the detection signal first increased and then decreased, while the detection background and noise increased directly. The suitable integral potential should be 0.1 V. With the concentration of NaOH increased, the retention time descended sharply, while the integral area increased quickly before they are coming back into balance. The number of theoretical plates increased firstly and then decreased. The optimum concentration of NaOH was 50 mmol·L^-1. As the flow …

Preparation Of A New Laccase Biosensor Based On Bimetallic Pt/Au Particles And Chitosan/Silica Sol-Gel Hybrid Films For Determination Of Catechol, Tong-Fang Lou, Jian-Ying Qu, Huan-Huan Xing, Xue-Ping Du, Ying Dong

Journal of Electrochemistry

A novel laccase (Lac) biosensor was fabricated successfully by means of entrapping Lac into bimetallic Pt/Au particles and chitosan/silica (CS-SiO₂) sol-gel hybrid films, and then applied to determine catechol (CC) concentration. The experiment results showed that the biosensor can electrocatalyze the reduction of CC, and the peak current increased linearly with the concentration of CC in the range of 8×10^-7 ~ 1×10^-4 mol·L^-1 (r = 0.9993) with a detection limit of 7.9×10^-8 mol·L^-1 by cyclic voltammetric response. The biosensor exhibited good sensitivity, stability and reproducibility, with a broad linear range for potential applications.

Reactivity Studies Of Tridhydropyridine Radical Cautions By Using Fourier-Transform Ion Cyclotron Resonance Mass Spectrometry And Advancement Of Mass Spectrometric Analysis Of Asphaltenes And Degradation Products, Mohammad Sabir Aqueel

Open Access Dissertations

Aromatic organic molecules which have unpaired electrons play an important role in a variety of applications in the fields of organic synthesis, organic magnets, and biological activity of organic compounds. Several studies have been published on σ- type carbon-centered mono- and biradicals. Reactive intermediates with three formally unpaired electrons are known as triradicals. They can be defined as species with three electrons distributed in three degenerate or nearly degenerate orbitals, based on Salem's definition of biradicals from the electronic structure point of view. Very little is known about the reactivity of carbon-centered σ,σ,σ- triradicals due to the complexity of studying …

Design And Development Of A Novel Glucose Biosensor Based On The Ferrocene-Functionalized Fe3O4 Nanoparticles/Carbon Nanotubes/Chitosan Nanocomposite Film Modified Electrode, Hua-Ping Peng, Dai-Jun Zha, Wei Chen, Ai-Lin Liu, Xin-Hua Lin

Journal of Electrochemistry

A novel platform for the fabrication of glucose biosensor was successfully constructed by entrapping glucose oxidase (GOD) in a ferrocene monocarboxylic acid-aminated Fe₃O₄ magnetic nanoparticles conjugate (FMC-AFNPs)/chitosan (CS)/multiwall carbon nanotubes (MWNTs) nanocomposite. The formation of FMC-AFNPs could effectively prevent the leakage of ferrocene and retain its electrochemical activity. This GOD/FMC-AFNPs/CS/MWNTs matrix provided a biocompatible microenvironment for retaining the native activity of the immobilized GOD. Moreover, the presence of MWNTs enhanced the charge-transport properties of the composite and facilitated electron transfer between the GOD and the electrode for the electrocatalysis of glucose. Under the optimal conditions the designed …

A New Nonenzymatic Glucose Sensor Based On The Cuo Nanoplatelets, Yan-Cai Li, Fu-Ying Huang, Shun-Xing Li, Jie Chen, Shu-Qing Feng, Fei Wang

Journal of Electrochemistry

The CuO nanoplatelets were synthesized by hydrothermal method. The structure and morphology of the CuO nanoplatelets were characterized by TEM and XRD. A new nonenzymatic glucose sensor was constructed by immobilizing the CuO nanoplatelets on glassy carbon electrode with Nafion. The electrochemical performance of the CuO/Nafion/GCE for the detection of glucose was investigated by cyclic voltammetry and current-time curve. The experiment results showed that the linear dependence of the sensor was 0.01 to 0.3 mmol·L^-1 for glucose with a sensitivity of 1783.58 μA·mmol^-1·L·cm^-2, and the detection limit of the sensor was 0.80 μmol·L^-1 (S/N …

Spontaneous Formation Of One-Dimensional Hydrogen Gas Hydrate In Carbon Nanotubes, Wenhui Zhao, Lu Wang, Jaeil Bai, Joseph S. Francisco, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We present molecular dynamics simulation evidence of spontaneous formation of quasi-one-dimensional (Q1D) hydrogen gas hydrates within single-walled carbon nanotubes (SW-CNTs) of nanometer-sized diameter (1−1.3 nm) near ambient temperature. Contrary to conventional 3D gas hydrates in which the guest molecules are typically contained in individual and isolated cages in the host lattice, the guest H₂ molecules in the Q1D gas hydrates are contained within a 1D nanochannel in which the H₂ molecules form a molecule wire. In particular, we show that in the (15,0) zigzag SW-CNT, the hexagonal H₂ hydrate tends to form, with one H₂ molecule …

A Photoelectron Spectroscopy And Ab Initio Study Of The Structures And Chemical Bonding Of The B25 − Cluster, Zachary A Piazza, Ivan H. Popov, Wei-Li Li, Rhitankar Pal, Xiao Cheng Zeng, Alexander I. Boldyrev, Lai-Sheng Wang

Xiao Cheng Zeng Publications

Photoelectron spectroscopy and ab initio calculations are used to investigate the structures and chemical bonding of the B₂₅ − cluster. Global minimum searches reveal a dense potential energy landscape with 13 quasi-planar structures within 10 kcal/mol at the CCSD(T)/6-311+G(d) level of theory. Three quasi-planar isomers (I, II, and III) are lowest in energy and nearly degenerate at the CCSD(T) level of theory, with II and III being 0.8 and 0.9 kcal/mol higher, respectively, whereas at two density functional levels of theory isomer III is the lowest in energy (8.4 kcal/mol more stable than I at PBE0/6-311+G(2df) level). Comparison with …

Science Classics, Mark Masthay

Chemistry Faculty Publications

An essay on the impact of the works in the Imprints and Impressions: Milestones in Human Progress, an exhibition of rare books from the collection of Stuart Rose. Exhibition was held Sept. 29-Nov. 9, 2014, at the University of Dayton.

Ferroelectric Hexagonal And Rhombic Monolayer Ice Phases, Wen-Hui Zhao, Jaeil Bai, Lan-Feng Yuan, Jinlong Yang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Two new phases of water, the mid-density hexagonal monolayer ice and the high-density flat rhombic monolayer ice, are observed in our molecular dynamics simulations of monolayer water confined between two smooth hydrophobic walls. These are in addition to the two monolayer ices reported previously, namely, the low-density 4∙8² monolayer ice and the high-density puckered rhombic monolayer ice (HD-pRMI). Stabilities of the structures are confirmed by ab initio computation. Importantly, both new phases and the HD-pRMI are predicted to be ferroelectric. An in-plane external electric field can further stabilize these ferroelectric monolayer ices.

Mos2/Mx2 Heterobilayers: Bandgap Engineering Via Tensile Strain Or External Electrical Field, Ning Lu, Hongyan Guo, Lei Li, Jun Dai, Lu Wang, Wai-Ning Mei, Xiaojun Wu, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We have performed a comprehensive first-principles study of the electronic and magnetic properties of two-dimensional (2D) transition-metal dichalcogenide (TMD) heterobilayers MX₂/MoS₂ (M = Mo, Cr, W, Fe, V; X = S, Se). For M = Mo, Cr, W; X = S, Se, all heterobilayers show semiconducting characteristics with an indirect bandgap with the exception of the WSe2/MoS2 heterobilayer which retains the directbandgap character of the constituent monolayer. For M = Fe, V; X = S, Se, the MX₂/MoS₂ heterobilayers exhibit metallic characters. Particular attention of this study has been focused on engineering the bandgap …

Van Der Waals Trilayers And Superlattices: Modification Of Electronic Structures Of Mos2 By Intercalation, Ning Lu, Hongyan Guo, Lu Wang, Xiaojun Wu, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We perform a comprehensive first-principles study of the electronic properties of van der Waals (vdW) trilayers via intercalating a twodimensional (2D) monolayer (ML = BN, MoSe₂, WS₂, orWSe₂) between a MoS₂ bilayer to form various MoS₂/ML/MoS₂ sandwich trilayers. We find that the BN monolayer is themost effective sheet to decouple the interlayer vdW coupling of the MoS₂ bilayer, and the resulting sandwich trilayer can recover the electronic structures of the MoS₂ monolayer, particularly the direct-gap character. Further study of the MoS₂/BN superlattices confirms the effectiveness of …

Unraveling Crystalline Structure Of High-Pressure Phase Of Silicon Carbonate, Rulong Zhou, Bingyan Qu, Jun Dai, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Although CO₂ and SiO₂ both belong to group-IV oxides, they exhibit remarkably different bonding characteristics and phase behavior at ambient conditions. At room temperature, CO₂ is a gas, whereas SiO₂ is a covalent solid with rich polymorphs. A recent successful synthesis of the silicon-carbonate solid from the reaction between CO₂ and SiO₂ under high pressure [M. Santoro et al., Proc. Natl. Acad. Sci. U.S.A. 108, 7689 (2011)] has resolved a long-standing puzzle regarding whether a Si_xC_1−xO₂ compound between CO₂ and SiO₂ exists in nature. Nevertheless, the detailed …

Surface Complexation Of Monosubstituted Organoarsenicals On Hematite: Atr-Ftir Investigations, Md Abdus Sabur

Theses and Dissertations (Comprehensive)

Little is known about the surface chemistry of organoarsenic compounds with iron-containing materials commonly found in geosorbents and arsenic removal technologies. In this thesis, these organoarsenicals include aliphatic and aromatic arsenicals that historically have been used as herbicides, pesticides and in the poultry feed industry, respectively. Attenuated total internal reflectance Fourier transform infrared spectroscopy has been used to study the surface interactions of organoarsenicals at the molecular level under various environmentally-relevant conditions. Kinetic and thermodynamic parameters extracted from these molecular level experiments provide trends that are not observed in any published bulk experiments. Apparent initial rates of adsorption and desorption …

Phosphate Esters, Thiophosphate Esters And Metal Thiophosphates As Lubricant Additives, David W. Johnson, John E. Hils

Chemistry Faculty Publications

Phosphate esters, thiophosphate esters and metal thiophosphates have been used as lubricant additives for over 50 years. While their use has been extensive, a detailed knowledge of how they work has been a much more recent development. In this paper, the use of phosphate esters and thiophosphate esters as anti-wear or extreme pressure additives is reviewed with an emphasis on their mechanism of action. The review includes the use of alkyl phosphates, triaryl phosphates and metal containing thiophosphate esters. The mechanisms of these materials interacting with a range of iron and steel based bearing material are examined.

Applications Of Spectroscopic Ellipsometry In Corrosion Investigation, Ling-Jie Li, Yu-Ling He, Jing-Lei Lei, Sheng Tao Zhang

Journal of Electrochemistry

As a highly-sensitive and non-destructive in situ technique, spectroscopic ellipsometry has been widely applied in corrosion investigation to acquire the dynamic information of the “electrode-medium” interface during corrosion. This paper lays out some representative demonstrations in several established optical models used to interpret data obtained with spectroscopic ellipsometry in corrosion investigation. In addition, the latest trends in development of this technique are analyzed.

An Investigation Of Thin Films Formed On Zinc By Spectroscopic Ellipsometry, Juan Zuo, Ying Chen, Chang-Jian Lin, Andreas Erbe

Journal of Electrochemistry

The formation of natural oxide films on polycrystalline zinc surface, the growth of natural oxide films in different atmospheres, as well as the electrochemical process of metal zinc in alkaline carbonate solution, studied recently by using spectroscopic ellipsometry in our group, are introduced. The objective of this paper is to outline that the optical, electrical properties, the change and growth kinetics of zinc metal oxide film on the surface can be investigated by in-situ and ex-situ ellipsometry, which makes significant sense to evaluate the overall performance of zinc oxide layer.

Construction And Demonstration Of A Tandem Mass Spectrometer Based Instrument For Cold Ion Spectroscopy, James Gerhardt Redwine

Open Access Dissertations

A new instrument incorporating ion trap based tandem mass spectrometry and cold ion UV and UV-IR double resonance spectroscopy has been developed at Purdue University for the study of gas phase, biologically relevant ions. The instrument incorporates multiple quadrupole linear ion trap mass analyzers to prepare and isolate the precursor ions as well as to analyze the resultant photofragments. A 22-pole ion trap cooled to 5 K via a closed cycle helium cryostat is used to cool the ions for spectroscopic interrogation. Results show the vibrational and rotational temperature of a wide assortment of ions to be 12±2 K.

The …

Spectroscopic Characterization Of The Water-Oxidation Intermediates In The Ru-Based Catalysts For Artificial Photosynthesis, Dooshaye Moonshiram

Open Access Dissertations

Utilization of sunlight requires solar capture, light-to-energy conversion and storage. One effective way to store energy is to convert it into chemical energy by fuel-forming reactions, such as water splitting into hydrogen and oxygen. Ruthenium complexes are among few molecular-defined catalysts capable of water splitting. Insight into the mechanism of their action will help to design future robust and economically feasible catalysts for light-to-energy conversion. Mechanistic insights about the design of such catalysts can be acquired through spectroscopic analysis of short-lived intermediates of catalytic water oxidation. Development of time-resolved approaches through stopped flow UV-Vis Spectroscopy to follow the catalysis of …

Conversion Of Iodide To Hypoiodous Acid And Iodine In Aqueous Microdroplets Exposed To Ozone, Elizabeth A. Pillar, Marcelo I. Guzman, Jose M. Rodriguez

Chemistry Faculty Publications

Halides are incorporated into aerosol sea spray, where they start the catalytic destruction of ozone (O₃) over the oceans and affect the global troposphere. Two intriguing environmental problems undergoing continuous research are (1) to understand how reactive gas phase molecular halogens are directly produced from inorganic halides exposed to O₃ and (2) to constrain the environmental factors that control this interfacial process. This paper presents a laboratory study of the reaction of O₃ at variable iodide (I^–) concentration (0.010–100 μM) for solutions aerosolized at 25 °C, which reveal remarkable differences in the reaction intermediates …

Structure, Theoretical Studies And Coupling Reactions Of Some New Cyclic Boronic Esters, Andrew Kuttler, Sravanthi Durganala, Albert Fratini, Alexander Morgan, Vladimir Benin

Chemistry Faculty Publications

The present report describes the X-ray structural and theoretical studies of some new pinacolboronate esters, and it also outlines the use of the target structures in Suzuki coupling reactions to produce new aromatic or heteroaromatic esters and amides. X-ray structural analysis of the studied compounds revealed that the pinacolborane ring's position with respect to the benzene ring varies, depending on the particular environment. An ortho-positioned carboxylic ester (methyl ester) causes a nearly perpendicular orientation of the pinacolborane unit with respect to the benzene ring, whereas an ortho-positioned amide (N,N-dimethylamide) causes the pinacolborane unit to orient itself nearly coplanar. A plausible …

Io3- And I- Sorption From Groundwater By Layered Double Hydroxides, Abbey Rickelmann, Emily Campbell, Natasha Pence, Tatiana Levitskaia, Sayandev Chatterjee, Frances Smith

STAR Program Research Presentations

Several subsurface water plumes are found at the Hanford U.S. DOE site. These plumes contain many different types of hazardous components including radioactive iodate (IO₃^-) and iodide (I^-), which may have deleterious health effects. To selectively uptake IO₃^- and I^-, inorganic layered double hydroxide (LDH) compounds were synthesized and tested. LDHs are mixed transition metal hydroxides that contain positively charged layers that undergo anion exchange. When LDHs are submerged in the plume water, they can selectively uptake IO₃^- and I^- and remove them from the plume. Raman spectroscopy …

Optimization Of Sample Preparation In Matrix-Assisted Laser Desorption/Ionization (Maldi) Mass Spectrometry Of Macromolecules, Evgenia Akhmetova

Graduate Theses and Dissertations

New method for the matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) and Fourier transform mass spectrometry (MALDI-FTMS) analysis of low molecular weight polyvinyl acetate (PVAc) was developed and then applied to the characterization of commercially available chewing gum. The optimization of MALDI analysis of PVAc was achieved by investigating the influence of sample preparation variables such as the choice of solvent and choice of matrix-analyte ratio. It was demonstrated that the use of ethyl acetate as a solvent and 2,5-Dihydroxybenzoic acid as a matrix yielded the highest signal intensity for the pure polymer sample. The application of TOF technique did not …

Characterization By Nmr Of Reactants And Products Of Hydrofluoroether Isomers, Cf3(Cf2)3och3 And (Cf3)2c(F)Cf2och3, Reacting With Isopropyl Alcohol, Howard Knachel, Vladimir Benin, William E. Moddeman, Janine C. Birkbeck, Thomas A. Kestner, Tayna L. Young

Chemistry Faculty Publications

The 3M Company product Novec™ 71IPA DL, a mixture of methoxyperfluorobutane, methoxyperfluoroisobutane and 4.5 wt.% isopropyl alcohol, has been found to be very stable at ambient temperature, producing fluoride at the rate of ~1 ppm/year. Our earlier kinetic and theoretical studies have identified the reaction mechanism. This paper identifies the ¹H and ¹⁹F NMR chemical shifts, multiplicities, and coupling constants of reactants and the major products that result from aging the mixture in sealed Pyrex NMR tubes for periods up to 1.8 years at temperatures from 26 °C to 102 °C. Chemical shifts and coupling constants of fluorine …

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils

Chemistry Faculty Publications

One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two different stainless steels at varying temperatures ranging from 300 °C to 350 °C in vacuum. Significant decomposition of the lubricant base-stocks and the phosphate ester additive did occur in most of the trials resulting in the formation of carboxylic acids and phenols. …

An Electrochemical Impedance Spectroscopic Study Of Cuf2/Moo3/C Cathode Composites, Yue-Li Shi, Nan Wu, Ming-Fang Shen, Jia-Qun Dong, Quang-Chao Zhuang, Li Jiang

Journal of Electrochemistry

Composite electrode of CuF₂/MoO₃/C was fabricated through high energy mechanical milling. The properties of CuF₂/MoO₃/C were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (TEM), galvanostatic charge-discharge measurements, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the grain sizes of CuF₂ and MoO₃ after milling were 200 ~ 300 nm, and the initial discharge capacity of CuF₂/MoO₃/C was 647 mAh·g^-1 at room temperature and at a current density of 10 mA·g^-1. However, the …

Current Development Of Quantum Dots Based Electrochemiluminescence Immunosensors, Ling-Ling Li, Qian Lu, Jun-Jie Zhu

Journal of Electrochemistry

Electrochemiluminescence exhibits the merits of both luminescence and electrochemistry analysis, and has been extensively employed in biosensors. Quantum dots are considered one of the three main kinds of electrochemiluminescence luminophores due to their unique properties. This paper briefly reviews the classification and signal amplification technology of quantum dots based electrochemiluminescence immunosensors. Future research trends are also suggested.

Combination And Applications Of Time-Resolved Surface Plasmon Resonance Spectroscopy And Electrochemical Methods, Yu Bao, Yan Mao, Wei Wang, Zheng-Gang Li, Li Niu

Journal of Electrochemistry

Electrochemical-surface plasmon resonance (EC-SPR) technique, developed in recent years, is a new technology which combines time-resolved surface plasmon resonance spectroscopy and electrochemical methods. Surface plasmon resonance (SPR) is a physical phenomenon generated by optical coupling using a metallic thin film and is very sensitive to optical analysis. The principles of SPR and EC-SPR are briefly introduced and the applications of the combination of SPR spectroscopy with electrochemical techniques are reviewed in this paper. This new technology has been widely used in such research areas as reaction dynamics, biochemical sensors, electrode/electrolyte interfaces, kinetic parameters and bimolecular interactions.

An In Situ Ftir Spectroelectrochemical Study On Methanol Oxidation At Pt-Mo2C/Gc Catalyst, Hai-Ping Huang, Xi-Yu Yao, Pei-Kang Shen

Journal of Electrochemistry

A 40% Pt on Mo₂C/GC catalyst has been prepared by ion exchange method. The mechanism of methanol electrooxidation on Pt-Mo₂C/GC and commercial Pt/C catalysts in acidic media was studied by cyclic voltammetry, XRD measurements and in-situ Fourier transform infrared spectroelectrochemistry. The results revealed that the Pt nanoparticles were uniformly dispersed on Mo₂C/GC with an average particle size of 3 nm. The cyclic voltammetric and chronopotentiometric experiments indicated that Pt-Mo₂C/GC catalyst exhibited a better performance for methanol oxidation than that of Pt/C in acid solution. A negative shift over 90 mV of the …

Preparation Of Phosphonoterephthalic Acids Via Palladium-Catalyzed Coupling Of Aromatic Iodoesters, Nathaniel Ivan, Vladimir Benin, Alexander Morgan

Chemistry Faculty Publications

The current article reports in detail the preparation of two phosphonoterephthalic acids: 2-phosphonoterephthalic acid (1) and 2,5-diphosphonoterephthalic acid (2). Efficient, scalable syntheses have been developed for both compounds based on Pd-catalyzed coupling reactions of iodinated terephthalate esters. Phosphonoterephthalic acids are potentially useful as flame-retardant additives or as monomers for the construction of acid-pendant polymer chains.