Organic Chemistry Commons^™

High Temperature Materials From Bis-Ortho-Diynylarene (Boda)-Derived Resins And Perfluorocyclobutyl (Pfcb) Aryl Ether Polymers, Ernesto Isaac Borrego

Theses and Dissertations

This work expands the current understanding of materials chemistry and engineering capabilities of two synthetic platforms: 1.) bis-ortho-diynylarenes (BODA) and 2.) trifluorovinylaryl ethers (TFVE). Each platform possesses a unique chemistry which paradoxically enables the development of high-performance materials therefrom while simultaneously retaining exceptional melt and solution processability. Leveraging the apparent dichotomy in properties (performance/processability) obtainable from these two synthetics platforms, we have pursued and achieved a practical approach to high-temperature resistant materials with an immense potential for technology transfer and commercialization:

1.) BODA-derived resins (BDR) constitute a versatile platform of melt-processable resins capable of rapidly producing high performance …

Substituent Effects And Mechanistic Insights On The Catalytic Activities Of (Tetraarylcyclopentadienone)Iron Carbonyl Compounds In Transfer Hydrogenations And Dehydrogenations, Bryn K. Werley, Xintong Hou, Evan P. Bertonazzi, Anthony Chianese, Timothy W. Funk

Chemistry Faculty Publications

(Cyclopentadienone)iron carbonyl compounds are catalytically active in carbonyl/imine reductions, alcohol oxidations, and borrowing hydrogen reactions, but the effect of cyclopentadienone electronics on their activity is not well established. A series of (tetraarylcyclopentadienone)iron tricarbonyl compounds with varied electron densities on the cyclopentadienone were prepared, and their activities in transfer hydrogenations and dehydrogenations were explored. Additionally, mechanistic studies, including kinetic isotope effect experiments and modifications to substrate electronics, were undertaken to gain insights into catalyst resting states and turnover-limiting steps of these reactions. As the cyclopentadienone electron density increased, both the transfer hydrogenation and dehydrogenation rates increased. A catalytically relevant, trimethylamine-ligated iron …

Composite And Polymer Formulation Employing Sulfur And Bio-Olefin Feedstocks, Claudia V. Lopez

All Dissertations

Environmental sustainability represents a challenge for society since industrial growth has a direct impact on natural resources and waste production. New technologies that effectively incorporate waste into renewable resources are critical to the development of a sustainable and circular economy. The manufacturing of structural materials like Portland cement (OPC) is responsible for >8% of the global anthropogenic emissions of carbon dioxide, with ~ 1 kg of CO₂ released to the atmosphere for every kilogram of OPC produced. For instance, the development of sustainable structural materials is a key factor to reduce the greenhouse emissions and to attenuate the climate …

N–((2–Acetylphenyl)Carbamothioyl)Benzamide: Synthesis, Crystal Structure Analysis, And Theoretical Studies, Akin Oztaslar, Hakan Arslan

Karbala International Journal of Modern Science

N–((2–Acetylphenyl)carbamothioyl)benzamide has been synthesized and characterized. The molecular conformation of the investigated compound is stabilized by C16–H16B⋅⋅⋅O2ⁱ (i: 1+x, y, z) intermolecular and C14–H14⋅⋅⋅S1, N2–H2⋅⋅⋅O2, and N2–H2⋅⋅⋅O1 intramolecular H–bonds. All DFT calculations have been implemented at the B3LYP level with the 6–311G(d,p) basis set. The optimized molecular structure parameters have been compared with the experimental one in the solid phase. The energy gap, global chemical reactivity descriptor parameters, MEP, Fukui functions, DoS, NLO, and NBO analysis were also computed and investigated. The intermolecular interactions and their energies are evaluated using Hirshfeld surface and energy framework analyses. To determine …

A Synthetic Approach To The Optimization Of Silicon-Rosindolizine Swir Fluorophores, Timothy Lewis

Honors Theses

Fluorophores emitting within the near-infrared (700 – 1000 nm) or shortwave-infrared (1000 – 1700 nm) regions of the electromagnetic spectrum are of particular interest for their potential to supplement or even outright replace commonly used biological imaging techniques, such as magnetic resonance imaging and computed tomography scanning. Various characteristics make these molecules particularly appealing to researchers, such as their ease of synthetic tunability, generally low toxicity, and high solubility in biological media in comparison to other NIR- and SWIR-emissive fluorophores. Different molecular skeletons have been examined for use as the core of these imaging agents, such as squaraine, cyanine, and …

Evaluation Of Promising Eco-Friendly Flame Retardants For Bio-Based Rigid Polyurethane Foams Based On Modified Castor Oil, Prasadi Abeysinghe Arachchilage

Electronic Theses & Dissertations

Fossil fuel derivatives in the polyurethane industry are gradually being replaced with environmentally friendly alternative bio-based resources. Vegetable-oil-based polyols are emerging bio-based resources that can decrease cost competitiveness in polyurethane markets, reduce environmental impacts, and meet the urgent need for green and sustainable development strategies. Among this, interest is the use of castor oil to make polyurethane because of its inedibility and the fact that it contains many functionalizable chemical groups. However, the poor thermal stability and low load-bearing capacity of castor-oil-based rigid polyurethane foam limits its application. Two methods were used to address these limitations: (i) more hydroxyl groups …

Synthesis And Properties Of Bio-Based 3d Printable Resins, Cameron Woods, Seth Taylor, Jeremiah Coughlon, Turner Perdue, Sourav Chatterjee, Jason E. Bara

Scholars Week

A photopolymer resin is a monomer that, when introduced to light of a certain wavelength, starts to polymerize into a solid. This has become a growing part of the 3D printing industry. There have been many advancements in the field of 3D printing, however, a lot of these resins are not environmentally friendly and even harmful if not handled in the correct manner. Plant based resins are becoming more and more popular because of their biodegradability and for the possibility of using renewable resources. Glycerol is a plant-based compound that is produced in excess in industry. Glycerol obtained from bioethanol …

Physiochemical Properties Of Urethane-Containing Ionic Liquids And Ionenes From A Non-Isocyanate Synthetic Approach, George Timmermann

Scholars Week

Ionic polymers that are designed to contain ionic liquids (ILs) in their backbones have been shown to exhibit a high degree of variability through changing the type of ionic character and the location of the ionic region within the molecule. This large amount of variability in both the structure and characteristics of ILs allows researchers to design task-specific ionic polymers and ILs for a variety of applications including gas separation membranes and solid polymer electrolytes. The synthesis of a specific class of ILs and ionenes through the incorporation of urethane groups with imidazolium rings by reacting carbonyl diimidazole with various …

Microscale Chemical Manipulation And Imaging Using Photoactive Molecules And Light, Uroob Haris

Chemistry Theses and Dissertations

Chemical manipulation with light has been an active and growing area of research with important implications in materials science, biotechnology, and environmental science. From early investigations of light sensitive materials for photography in the 19^th century, to printing billions of transistors on a semiconductor chip in present day, scientists have gained a deep understanding of photochemistry and the processes that allow us to harness light for everyday applications. In this work, we explore microscale fabrication and molecular imaging using light and photoactive molecules as foundational tools. We develop a visible-light mediated technique for high resolution microscale chemical lithography comprising …

Pyrrolopyrrole-Based Materials For High-Contrast Electrochromics, Allison Marie Hawks

Master of Science in Chemical Sciences Theses

Understanding structure-property relationships of underutilized p-conjugated chromophores is an important task for the continued discovery of materials that will find utility in organic electronic applications. Dihydropyrrolo[3,2-b]pyrroles (DHPPs) are synthetically simple and highly tailorable chromophores that can be decorated with diverse functionalities that readily manipulate optoelectronic properties useful for a variety of applications. However, a thorough understanding of how these functionalities influence properties of DHPPs that will be useful in applications such as electrochromism is unknown. Motivated to exploit the synthetic simplicity and tailorability of DHPPs, a family of DHPP chromophores was synthesized to probe how functionality and connectivity …

Magnetic Interactions In Open-Shell Conjugated Polymers, Michael Steelman

Dissertations

Most materials are closed shell in which every electron participates in a bond, resulting in unremarkable magnetometry signatures and functionalities. While rare, modern technologies rely on magnetic materials in which unpaired electrons are localized to inorganic atomic centers. In recent decades, a collection of organic open-shell π-conjugated molecules have shown magnetic ordering, albeit at exceedingly low temperatures; a result of weak noncovalent intermolecular interactions limiting long range electronic exchange. Thus, practically applicable sp orbital magnetism that persists at or above room temperature remains a grand challenge for chemistry and physics. Despite the wide variety of chemical structures afforded by organic …

Dual Ionic Liquid-Functionalized Cellulosic Materials: Thermal, Mechanical And Conductive Properties, Elizabeth Mcgrew, Kevin M. Miller Phd

Posters-at-the-Capitol

Cellulose, an inexpensive and renewable biomacromolecule, represents an intriguing synthetic foundation for new materials with task-specific properties. Here, we wish to report a synthetic route for functionalizing cellulose with a side chain containing two ionic liquid functional groups using azide-alkyne ‘click’ cyclization strategy, followed by quaternization of the two resulting heterocycles (1,2,3-triazole and imidazole). Through this functionalization strategy, the resulting cellulosic materials exhibited significant softening, with several glass transition (T_g) values observed below room temperature, indicating the amorphous nature of the materials, with the T_g dependent on both the length of the side chain and the …

Structural And Functional Modulation Of Metal-Organic Supercontainers (Moscs) And Their Applications In Supramolecular Catalysis, Shrijana Dc

Dissertations and Theses

Metal-organic supercontainers (MOSCs), a breakthrough development in our laboratory since 2012, have emerged as promising enzyme mimics, showcasing their prowess in encapsulating guest molecules and catalyzing confined chemical reactions. The intrigue surrounding MOSCs stems from their extraordinary traits, encompassing multiple binding domains, high stability, large surface area, tunable pore size, and structural modularity. Primarily comprising sulfonylcalix[4]arenes, divalent metal ions, and carboxylate linkers, MOSCs' quintessential architecture comprises both endo- and exo- nano-cavities, amenable to guest interaction, with geometry and functionality manipulation achievable through precise precursor selection. Nonetheless, early MOSC models exhibit limited reactivity, often necessitating more potent nucleophiles or electrophiles. This …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Translating Chemistry, Structure, And Processing To The Solid-State Morphology And Function Of Organic Semiconductors Through Computational Modeling And Simulations, Chamikara D. Karunasena

Theses and Dissertations--Chemistry

The immense synthetic design space and material versatility have driven the exploration and development of organic semiconductors (OSC) over several decades. While many OSC designs focus on the chemistries of the molecular or polymer building blocks, a priori, multiscale control over the solid-state morphology is required for effective application of the active layer in a given technology. However, molecular assembly during solid-state formation is a complex function interconnecting the building block chemistry and the processing environment. Insufficient knowledge as to how these aspects engage, especially at the atomistic and molecular scales, has so far limited the ability to predict …

Water-Soluble Palladium, Copper, And Nickel Catalysts And Their Formation In Ligand-Free Suzuki-Miyaura Cross-Coupling Reactions, Priya Karna

Theses and Dissertations--Chemistry

Transition-metal catalyzed Suzuki-Miyaura (SM) cross coupling is a powerful synthetic method for constructing carbon-carbon and carbon-heteroatom bonds in designing organic compounds, agrochemicals, pharmaceuticals, and precursors for materials. However, the nature of catalysis and identity of the transition metal catalysts used in these reactions remain under debate or unknown. This dissertation reports the studies of three metals: Pd, Cu, and Ni. Pd-nanocluster catalysts and their formation in ligand-free SM reactions with Pd(II) nitrate as a precatalyst was investigated. The catalysts are water-soluble neutral Pd tetramer and trimer in their singlet electronic states as identified by UV-Vis absorption spectroscopy and are formed …

Development Of An Effective Au:Pd Bimetallic Heterogeneous Catalyst For Oxidative Lignin Depolymerization To Low Molecular Weight Aromatics, Gayan P. Karunasinghe

Theses and Dissertations--Chemistry

The principal concept behind biorefining involves the transformation of lignocellulosic biomass into valuable products and energy resources. Historically, biorefinery strategies for lignocellulosic biomass have primarily focused on improving the conversion of cellulose into ethanol, often neglecting the underutilized lignin component. Lignin consists of phenolic subunits, from which it follows that value-added products can be obtained from lignin depolymerization. Unfortunately, lignin utilization is particularly challenging due to its high structural irregularity and recalcitrance. The goal of this study was to develop an AuPd/Li-Al layered double hydroxide (LDH) bimetallic catalyst for efficient lignin depolymerization, resulting in the production of high-value aromatic compounds. …

Exploring The Role Of Ring Annulation In Polycyclic Aromatic Hydrocarbons For Organic Electronic Applications, Tanner Smith

Theses and Dissertations--Chemistry

Organic materials offer promising potential for the next generation of electronic devices, as their tunability, processability, and low-temperature manufacturing make them a cheap and versatile alternative to traditional silicon-based electronics. The ability to systematically alter the electronic properties of organic materials is vital for their incorporation into device applications. Polycyclic aromatic hydrocarbons (PAHs) are of significant interest for organic electronic applications, as relevant properties are highly dependent on their size, structure, and functionalities, and thus can be tuned to fit a wide variety of applications. Due to the enormous number of structural isomers available in larger PAHs, the development of …

Investigating The Electrochemical Behavior Of Dihydropyrrolopyroles For Use As Anodically Coloring Electrochromes, Perry Skiouris, Ally Kisiel, Valentino Sorto, Julia Mauro, Graham Collier

Symposium of Student Scholars

Electrochromic materials have found widespread use in consumer electronics, energy saving windows, and military applications. They contain unique electronic properties allowing them to undergo a color change in a redox reaction. One classification of these molecules is known as anodically coloring electrochromes (ACEs). When in solution, these compounds are transmissive in the neutral (ground) state and absorb visible light upon oxidation, by the formation of a radical cation, thus making them colored. The focus of this study is the electronic transitions of this radical cation and how chemical modifications to the structures produce a variable color profile. To design prospective …

Visible Light-Assisted Deconstruction/Refunctionalization Of Strained And Unstrained N-Cycloalkylanilines, Elvis Duah Boateng

Graduate Theses and Dissertations

The exploitation of ring strain as a driving force to facilitate chemical reactions is a well-appreciated principle in organic chemistry. Of the strained carbocycles frequently explored in this respect, cyclopropane ring systems have drawn considerably more interest among synthetic chemists than their homolog, the cyclobutane ring systems, even though the strain energy of cyclobutane (26.7 kcal/mol) is similar to that of cyclopropane (27.5 kcal/mol). We have previously developed a [4+2] annulation reaction for the synthesis of aniline-substituted six-membered carbocycles under photoredox catalysis via the oxidative cleavage of N-cyclobutylanilines. The key reaction involved in this method is a ring-opening process of …

A Study On Interactions Between Metal-Organic Frameworks And Biological Materials, Josh Phipps

Graduate Theses and Dissertations

Metal-organic frameworks or MOFs are an extremely useful tool in many areas of applications. Their popularity in recent years has arisen from their high efficiency in catalytic chemical reactions. This is made possible due to their porous interior and the ability of the MOFs components to be functionalized. These same traits make MOFs excellent for use in protein encapsulation or immobilization and have the potential to become excellent drug carriers. Their development in this utilization has been limited dramatically compared to MOFs chemical applications. This is due in part to the nature of biological processes taking longer to study, but …

Ferrocenium Salt Aided Substitution Reactions And Synthesis Of Glycosylated Curcumin Derivatives, Deva Saroja Talasila

Dissertations

Organic synthesis has been significantly advanced with the employment of transition metal complexes. The discovery of transition metal catalysts provided the synthetic community with powerful tools for accelerating reactions and making them more selective and efficient. Many chemical reactions do not happen without a catalyst.

Iron-based catalysts have several advantages for the chemical industry because it is a non-toxic and ecologically friendly metal. Our group previously found that ferrocenium cations with a 3+ oxidation state of iron-catalyzed propargylic substitution reactions at low temperatures. The sandwich structure of ferrocenes allows substituents to be introduced on the cyclopentadienyl rings, which allows for …

Synthesis Of Carbon Nanohoops And Macrocycles Via Alkyne Metathesis, Xin Zhou

LSU Doctoral Dissertations

Cycloparaphenyleneacetylene (CPPA) and cycloparaphenylene (CPP) are called carbon nanohoops; they are fully conjugated macrocycles with radially oriented aromatic groups. Though many syntheses of CPPA and CPP were reported, in the macrocyclization step, the yields were usually not satisfying, as the reactions were irreversible. Our group utilizes alkyne metathesis to address this problem. Chapter 1 provides backgrounds and an introduction to the carbon nanohoops and alkyne metathesis.

Chapter 2 details the synthesis of the [3]CPP⁴A and [3]CPP⁵A, with good macrocyclization yields via alkyne metathesis. This study showed the error-correction ability of alkyne metathesis, especially with nonsymmetric substrates. …

Converting Hydrazone-Based Photoswitches Into Functional Materials, Sirun Yang

Dartmouth College Ph.D Dissertations

The development of new classes of molecular switches with enhanced performance and brand-new functionalities enables practitioners to push the frontiers of adaptive materials. In the realm of photoswitches, the bistability of hydrazones (i.e., molecules that incorporate the C=N-NH functional group) allows for the kinetic trapping of polymer and supramolecular assemblies resulting in multistate actuation and emergent phenomena that are not tractable with other photoswitches. This property has transformed hydrazone photoswitches into powerful tools that can be used in understanding fundamental molecular interactions and how to apply them in modulating the physicochemical properties of materials.

Progressing from disordered to …

Material Analysis And Conservation Treatment Of Louise Nevelson’S Sculpture Dawn’S Image, Night, Kaela Nurmi

Art Conservation Master's Projects

Louise Nevelson’s large-scale, matte black assemblage sculpture Dawn’s Image, Night, 1969, is owned by and currently on display at SUNY Buffalo State College. The paint layers exhibited significant amounts of dust, some damages, vandalism, and unsightly fingerprints. Extensive scientific analysis and archival research were utilized to design an appropriate treatment and long-term preservation plan. Methods of analysis include: Fourier transform infrared spectroscopy, pyrolysis-gas chromatography-mass spectrometry, microchemical testing, and xray fluorescence spectroscopy. The project also addresses the ethical considerations surrounding the prior removal of original components for safety considerations, repainting as a possible treatment, and the overall obstacles of treating a …

Sensitized Photooxidation Of Prenylated Compounds: Mechanisms Of Downstream Dark Effects And Phototoxicity Priming, Shakeela Jabeen

Dissertations, Theses, and Capstone Projects

This thesis consists of four chapters as detailed below.

Chapter 1 discusses a singlet oxygen priming mechanism. Airborne singlet oxygen derived from photosensitization of triplet dioxygen is shown to react with an alkene surfactant (8-methylnon-7-ene-1 sulfonate) leading to ‘ene’ hydroperoxides that in the dark inactivate planktonic E. coli. The ‘ene’ hydroperoxide photoproducts are not toxic on their own, but they become toxic after the bacteria are pretreated with singlet oxygen. The total quenching rate constant (k_T) of singlet oxygen of the alkene surfactant was measured to be 1.1 × 10⁶ M⁻¹ s^{− …}

Visible Light Photocatalysis Of Organic Reactions In H2o, Sankarsan Biswas

Dissertations, Theses, and Capstone Projects

Visible-light photocatalysis in H₂O provides an attractive, green alternative to typical organic synthesis, which often involves toxic solvents, metal catalysts, and large energy demands. Hence, there is a growing need for an efficient photocatalytic methods that use either aqueous media as a solvent or can proceed solvent-free. However, commercially available photocatalysts do not work well for aqueous photocatalysis. Supramolecular systems in particular have been explored recently to address these issues associated with aqueous photocatalysis. Chapter 1 will review recent advances in aqueous supramolecular photocatalysis with examples of different supramolecular systems and how they have addressed some of the …

Designing Dynamic And Degradable Polymeric Materials With Thiol-X Chemistries, Reese Sloan

Dissertations

With plastic production poised to increase in coming years, there arises a need to develop new polymeric materials designed to combat the global pollution crisis. A commonly utilized approach in addressing this challenge is to employ a responsive functional moiety into the polymer architecture. Thiol-X reactions, a commonly utilized class of “click” reactions, have garnered broad implementation in new stimuli-responsive materials. This work specifically focuses on utilizing radical-mediated thiol-ene coupling and base-catalyzed thiol-isocyanate reactions to develop a library of ternary thiol-ene/thiourethane covalent adaptable networks (CANs) and hydrolytically labile poly(thioether ketal) thermoplastics. CANs are a class of network materials capable of …

A Modular Synthesis Of Processable And Thermally Stable Semi-Fluorinated Aryl Ether Polymers Via Step-Growth Polymerization Of Fluoroalkenes, Ketki Eknath Shelar

Theses and Dissertations

Tailored fluoropolymers remain the leading choice for a wide variety of advanced high-performance applications, including electronic/optical and energy conversion, owing to their unique blend of complementary high-performance properties. Amorphous semi-fluorinated polymers exhibit improved solubility and melt processability when compared to traditional perfluoropolymers. A leading class of semi-fluorinated aryl ether polymers includes perfluorocyclobutyl (PFCB), perfluorocycloalkenyl (PFCA), and fluoroarylene vinylene ether (FAVE) polymers. Monomers containing aromatic trifluorovinyl ethers (TFVE) are used to synthesize PFCB polymers via radical-mediated [2+2] cyclodimerization. On the other hand, FAVE and PFCA polymers are polymerized via base-mediated nucleophilic addition/elimination of bisphenols with TFVE monomers and decafluorocyclohexene respectively. The …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.