Open Access. Powered by Scholars. Published by Universities.®

Organic Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 121 - 150 of 230

Full-Text Articles in Organic Chemistry

Examining The Effects Of Amino And Thiolate Ligands On The Reactivity And Selectivity Of Palladium On Carbon In Hydrogenation Reactions, Eric Liu, Christina Li Aug 2018

Examining The Effects Of Amino And Thiolate Ligands On The Reactivity And Selectivity Of Palladium On Carbon In Hydrogenation Reactions, Eric Liu, Christina Li

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heterogeneous catalysts are used widely by chemical and energy industries because they show high reactivity but often suffer from lack of selectivity. On the other hand, ligands are commonly used in homogeneous catalysts to control the reactivity and selectivity; however, the effects of the ligands on the steric and electronic properties of heterogeneous catalysts are less understood. We examine the effects of four different ligands: 1-adamantanethiol, 1-adamantylamine, 1-dodecanethiol, and 1-dodecylamine, for the commercial hydrogenation catalyst palladium on carbon. Hydrogenation reactions are used as a screening tool to see the behavior that the different catalysts exhibit in the presence of unsaturated …


Synthesis And Characterization Of Block Copolymers For Shear Force Responsive Materials And Sugar Conjugated Fluorescent Probes, Jacob Ryan Blankenship Aug 2018

Synthesis And Characterization Of Block Copolymers For Shear Force Responsive Materials And Sugar Conjugated Fluorescent Probes, Jacob Ryan Blankenship

Graduate Theses/Dissertations

Herein, I present my work towards two goals: shear force-responsive materials and sugarconjugated fluorescent probes for bacterial identification applications. The first work is on the development of stimuli-responsive polymers that allow for precise control over the release of encapsulated material. Stimuli-responsive polymers are becoming increasingly important in drug delivery and other applications. However there have been few reports on shear force-responsive micellar systems. I show the synthesis, and characterization by 1H and 13C NMR of four macro-chain transfer agents (macro-CTAs), one of which has not been previously reported. The resulting macro-CTAs were used in polymerization of vinyl acetate …


Thermosetting Polymers Via Azide Alkyne Cycloaddition, Richard H. Cooke Iii Jul 2018

Thermosetting Polymers Via Azide Alkyne Cycloaddition, Richard H. Cooke Iii

Dissertations

This dissertation exploits properties inherent to azide-alkyne cycloaddition and applies practical solutions to difficult problems. Chapter II addresses structure-property relationships in glassy azido-alkyne matrices by varying the identity of the central linkage within tetrapropargyl bis-aniline-type crosslinkers, and by the addition or omission of Cu(I) catalyst. This systematic study showed that an ether or methylene linkage yielded lower melting tetrapropargyl crosslinkers that were soluble in, and produced homogeneous, networks when cured with, a standard azido resin, di(3-azido-2-hydroxypropyl) ether of bisphenol-A; in contrast, a sulfone linkage yielded a relatively insoluble crosslinker and poorly dispersed, heterogeneous networks when reacted with the same …


Tumor-Targeting Fluorinated Phthalocyanines For Theranostic Applications, Erik Nathaniel Carrión May 2018

Tumor-Targeting Fluorinated Phthalocyanines For Theranostic Applications, Erik Nathaniel Carrión

Seton Hall University Dissertations and Theses (ETDs)

Hydrocarbon-based therapeutics and imaging agents are prone to chemical oxidation and degradation resulting in loss of activity and limited functional utility. Thus, more material is required to achieve long-lasting therapeutic effects. Phthalocyanines (Pcs) and their metal complexes (PcMs) can be utilized as prodrugs requiring only renewable energy resources namely, air and light, for cancer therapy and diagnostic (theranostic) applications related to photodynamic therapy (PDT). Replacement of labile C-H bonds in the Pc scaffold with a combination of fluoro and perfluoroisopropyl groups has resulted in a stable yet reactive oxidation catalyst of biological significance and importance. For example, F64PcZn, …


Highly Flame Retardant And Bio-Based Rigid Polyurethane Foams Derived From Orange Peel Oil, Chunyang Zhang May 2018

Highly Flame Retardant And Bio-Based Rigid Polyurethane Foams Derived From Orange Peel Oil, Chunyang Zhang

Electronic Theses & Dissertations

Polyurethane is an important class of polymer which is being used for various industrial applications in the form of rigid foams, flexible foams, thermoplastic, elastomer, coating, and adhesive. Especially there is a huge market for rigid polyurethane foams for their applications as thermal insulating material in building and housing. In general, polyurethanes are prepared using polyols and diisocyanates. Most of the polyols used by industries are petrochemical based. In this project, a novel polyol from an orange peel oil-based derivative, limonene dimercaptan, was synthesized using one step photochemical thiol-ene reaction. The synthesized polyol was used to prepare flame retardant polyurethane …


Long-Range Electrostatic Interactions In Gold Catalysis And Fluorinating Reagent Development., Zhichao Lu May 2018

Long-Range Electrostatic Interactions In Gold Catalysis And Fluorinating Reagent Development., Zhichao Lu

Electronic Theses and Dissertations

Our research focus is on applying two long range electrostatic interactions--coulombic interaction between ion pairs and hydrogen bonding—to two tasks: exploring counterion effects in gold catalysis and utilizing hydrogen bonding for fluorinating reagent development. Cationic gold catalysis is considered one of the most important breakthroughs in organic synthesis over the past two decades. A wealth of empirical information on counterion effects is now available regarding homogeneous gold catalysis. However, the rational understanding of the counterion effect on reactivity is still elusive. We proposed a widely applicable model to rationalize the kinetic effect in gold catalyzed reaction. We first solved the …


Higher Energy Gap Control Of Fluorescence In Conjugated Polymers, Chien-Hung Chiang Mar 2018

Higher Energy Gap Control Of Fluorescence In Conjugated Polymers, Chien-Hung Chiang

LSU Doctoral Dissertations

Chemo- and biosensors based on fluorescent conjugated polymer benefit from greater detection sensitivity due to amplification of the electronic perturbations produced by analyte binding. This amplification stems from the exciton-transporting properties of conjugated polymers. A conventional design paradigm relies on the analyte binding events which generate sites of lower energy relative to the polymer energy: either fluorescence quenching sites (turn-off sensors) or bathochromically shifted fluorophores (turn-on sensors). In both type sensors, the excitons migrate to the lower-energy site created by analyte binding.

This dissertation primarily focused the investigation of an alternative paradigm when analyte binding creates higher energy gap sites …


Systematic Size Control In The Synthesis Of Zero-Valent Iron Nanoparticles, Grant C. Bleier Feb 2018

Systematic Size Control In The Synthesis Of Zero-Valent Iron Nanoparticles, Grant C. Bleier

Chemistry and Chemical Biology ETDs

A novel synthetic method for the production of highly magnetic, low size-dispersity nanoparticles through reversible magnetic agglomeration is introduced and studied in detail. Initially, a weakly coordinating surfactant (3-octadecyl-2,4-pentanedione) is employed to produce a wide range of nanoparticle sizes ranging from 8 to 20 nm in diameter. The kinetics faced in these reactions by cheap and widely available iron complex precursors can be avoided in this method with the introduction of thermodynamic control, which occurs in the form of a magnetic precipitation event that essentially halts nanoparticle growth. Utilizing this synthetic method, the length of the alkyl chain on the …


Lignin Depolymerization: Mechanistic Analysis, Optimization And Application, Eric Michael Nagel Jan 2018

Lignin Depolymerization: Mechanistic Analysis, Optimization And Application, Eric Michael Nagel

Electronic Theses and Dissertations

Lignin is the most abundant aromatic biopolymer and is a potential source for phenolic chemical feedstocks. Lignin is composed of phenolic units connected by more than eight different linkages, the most common being β-O-4 which constitutes 50-60%. The hydrothermal decomposition of a guaiacol based β-O-4 lignin dimer was studied under neutral and basic conditions to elucidate the mechanism of β-O-4 bond cleavage and the formation of downstream products. Phenol-carbonyl condensation and vinyl-ether formation were shown to be the primary causes for low monomer yields under the tested conditions. Three Ni catalyst systems, Ni/C + H2, Ni/C-Zn, and Ni/Zn, …


Cascade Annulation And Ring-Opening Reactions Of Castagnoli-Cushman-Derived Allylic And Benzylic Thiomorpholinonates, Abdikani Omar Farah Jan 2018

Cascade Annulation And Ring-Opening Reactions Of Castagnoli-Cushman-Derived Allylic And Benzylic Thiomorpholinonates, Abdikani Omar Farah

All Master's Theses

Sulfur-containing compounds are prevalent in antibiotics, essential amino acids, bacterial RNA, food flavors, and enzymes. The divalent sulfur atom introduces a metabolic liability from a drug discovery standpoint. Indeed, it is quite telling that all the top ten best-selling drugs in 2012 contained sulfur. In this context, there is a growing need for the synthesis of sulfur-containing compounds in ways that are practical and cost-effective. One approach taken to achieve this goal is to employ diversity-oriented synthesis (DOS), which produces diverse complex molecules with similar core structures from a common precursor. When a DOS features a cascade or domino reaction …


Study Of The Effect Of Steric Bulk Of Side Chains On The Properties Of Conjugated Polymers, Bei Zhang Jan 2018

Study Of The Effect Of Steric Bulk Of Side Chains On The Properties Of Conjugated Polymers, Bei Zhang

Theses and Dissertations--Chemistry

Donor-acceptor conjugated polymers opened a new era for conjugated polymer research due to the abundant selection and combination of different conjugated units. This class of polymers function as semiconductor materials with potential application in plastic consumer electronics. The frontier molecular orbital energies of the polymers are generally determined by the selection of donor and acceptor units in the backbone structure, and their substituents. The side chains attached to the backbone not only affect the solubility of the materials, but also their self-assembly and morphological characteristics, which indirectly govern optoelectronic properties. It is important therefore to consider backbone architectures and the …


Design And Synthesis Of Functional Organic Materials, Anthony Joseph Petty Ii Jan 2018

Design And Synthesis Of Functional Organic Materials, Anthony Joseph Petty Ii

Theses and Dissertations--Chemistry

Control of solid state ordering in conjugated small molecules is paramount to the continued development and implementation of organic materials in electronic devices. However, there exists no reliable method on which to predicatively determine how a change to the molecular structure will impact the solid-state packing. As such, the molecule must be synthesized before its solid-state packing can be definitively evaluated. However, once the packing structure of a material is known there exist both qualitative structure- function relationships derived from the literature, as well as quantitative computational methods that can be employed to suggest if a material will perform well …


The Effect Of Oxidation, Thionation, And Dimerization On The Self-Assembly And Photophysical Properties Of Novel Discotic Materials, Katie M. Psutka Jan 2018

The Effect Of Oxidation, Thionation, And Dimerization On The Self-Assembly And Photophysical Properties Of Novel Discotic Materials, Katie M. Psutka

Theses and Dissertations (Comprehensive)

This thesis aims to increase understanding of the relationship between molecular structure and liquid crystalline temperature range by exploring the effects of oxidation, thionation, and dimerization on the self-assembly and properties of novel discotic materials. First, two alkoxy-substituted dibenzanthracenequinones were prepared by oxidation of the corresponding dibenzanthracenes. The quinone induced a liquid crystalline phase in the hexaalkoxy dibenzanthracene derivative, but not in the tetralkoxy derivative. However, both of the resulting materials were un-reactive to any further synthetic modifications that could be used to improve their properties. In comparison, two heteroaromatic dithienoanthracenedicarboximides were successfully prepared, although the addition of the thiophene …


Synthesis Of Healable Organic Semiconductor Through Dioxaborolane Bond, Junchen Liu, William W. Mcnutt, Jianguo Mei Aug 2017

Synthesis Of Healable Organic Semiconductor Through Dioxaborolane Bond, Junchen Liu, William W. Mcnutt, Jianguo Mei

The Summer Undergraduate Research Fellowship (SURF) Symposium

The field of organic semiconductors have gained enormous attention the past few decades. Organic materials offer numerous advantages over their inorganic counterparts. Recently a number of works have demonstrated organic semiconductors with healable properties. We aim to investigate the healable ability of an organic semiconductor by mimicking a vitrimer system through the reversible dioxaborolane bond. Vitrimers are polymers with reversible crosslink system. It has been reported that the use of the borane-oxygen bond as the crosslink showed good mechanical performance. The electrical properties will be inspected for the vitrimer-like polymer. In this report we describe a Diketopyrrolopyrrole base polymer incorporating …


Enediyne Derived Conjugated Polymers, Keda Hu Apr 2017

Enediyne Derived Conjugated Polymers, Keda Hu

Chemistry and Chemical Biology ETDs

The advance of conjugated polymers (CPs) is largely relied on the development of new polymerization methods, the discovery of novel polymers that possess unique chemical and physical properties, and understanding of their structure-property relationship. We have employed a set of trans-enediynes (trans-EDYs) for the preparation of four series of CPs, polydiacetylenes (PDAs), platinum-segmented PDAs, polytriacetylenes (PTAs) and boron doped polyacetylenes (BPAs). The resulting polymers displayed interesting optical and electrochemical properties which could be fine-tuned by the attachment of various side chains on the EDY moieties. We have applied acyclic EDY metathesis for the synthesis of PDAs, a class of CPs …


Preparation And Evaluation Techniques Of Porous Materials And Mixed Matrix Membranes For Targeted Co2 Separation Applications, Tsemre Tessema Jan 2017

Preparation And Evaluation Techniques Of Porous Materials And Mixed Matrix Membranes For Targeted Co2 Separation Applications, Tsemre Tessema

Theses and Dissertations

The use of porous sorbents for physisorptive capture of CO2 from gas mixtures has been deemed attractive due to the low energy penalty associated with recycling of such materials. Porous organic polymers (POPs) have emerged as promising candidates with potential in the treatment of pre- and post- fuel combustion processes to separate CO2 from gas mixtures. Concurrently, significant advances have been made in establishing calculation methods that evaluate the practicality of porous sorbents for targeted gas separation applications. However, these methods rely on single gas adsorption isotherms without accounting for the dynamic gas mixtures encountered in real-life applications. …


Heterogeneous Base Metal Catalyzed Oxidative Depolymerization Of Lignin And Lignin Model Compounds, John Adam Jennings Jan 2017

Heterogeneous Base Metal Catalyzed Oxidative Depolymerization Of Lignin And Lignin Model Compounds, John Adam Jennings

Theses and Dissertations--Chemistry

With the dwindling availability of petroleum, focus has shifted to renewable energy sources such as lignocellulosic biomass. Lignocellulosic biomass is composed of three main constituents, lignin, cellulose and hemicellulose. Due to the low value of cellulosic ethanol, utilization of the lignin component is necessary for the realization of an economically sustainable biorefinery model. Once depolymerized, lignin has the potential to replace petroleum-derived molecules used as bulk and specialty aromatic chemicals. Numerous lignin depolymerization strategies focus on cleavage of β-aryl ether linkages, usually at high temperatures and under reductive conditions.

Alternatively, selective benzylic oxidation strategies have recently been explored for …


Acenes, Heteroacenes And Analogous Molecules For Organic Photovoltaic And Field Effect Transistor Applications, Devin B. Granger Jan 2017

Acenes, Heteroacenes And Analogous Molecules For Organic Photovoltaic And Field Effect Transistor Applications, Devin B. Granger

Theses and Dissertations--Chemistry

Polycyclic aromatic hydrocarbons composed of benzenoid rings fused in a linear fashion comprise the class of compounds known as acenes. The structures containing three to six ring fusions are brightly colored and possess band gaps and charge transport efficiencies sufficient for semiconductor applications. These molecules have been investigated throughout the past several decades to assess their optoelectronic properties. The absorption, emission and charge transport properties of this series of molecules has been studied extensively to elucidate structure-property relationships. A wide variety of analogous molecules, incorporating heterocycles in place of benzenoid rings, demonstrate similar properties to the parent compounds and have …


Thermal Conductivities Of Organic Semiconductors, Yulong Yao Jan 2017

Thermal Conductivities Of Organic Semiconductors, Yulong Yao

Theses and Dissertations--Physics and Astronomy

Organic semiconductors have gained a lot of interest due to their ease of processing, low-cost and inherent mechanical flexibility. Although most of the research has been on their electronic and optical properties, knowledge of the thermal properties is important in the design of electronic devices as well. Our group has used ac-calorimetric techniques to measure both in-plane and transverse thermal conductivities of a variety of organic semiconductors including small-molecule crystals and polymer blends. For layered crystals composed of molecules with planar backbones and silylethynyl (or germylethynyl) sidegroups projecting between the layers, very high interplanar thermal conductivities have been observed, presumably …


Synthesis Of Multifunctional Polyacrylates And A Binding Group To Hemoglobin For The Treatment Of Traumatic Brain Injuries, Marina Michaud Jan 2017

Synthesis Of Multifunctional Polyacrylates And A Binding Group To Hemoglobin For The Treatment Of Traumatic Brain Injuries, Marina Michaud

Honors College Theses

Hemoglobin based oxygen carriers (HBOCs) hold promise as an effective emergency treatment of severe traumatic brain injuries (TBI). In the latest generation of HBOCs, polynitroxyl-pegylated hemoglobin (PNPH), cell-free hemoglobin is modified with TEMPO and PEG which reduce the toxicities associated with earlier generations of HBOCs. In our efforts to optimize the economic and therapeutic impacts of PNPH’s we have synthesized polydimethylaminoethyl methacrylate (poly-DMAEMA) under controlled living conditions via reverse addition-fragmentation chain transfer (RAFT) polymerization. The poly-DMAEMA was then successfully functionalized via quaternization of its NMe2 groups using chloroacetate derivatives of the TEMPO and PEG. This process was quantitative and …


Design And Synthesis Of Novel Octacarboxy Porphyrinic Metal–Organic Frameworks, Jacob A. Johnson Dec 2016

Design And Synthesis Of Novel Octacarboxy Porphyrinic Metal–Organic Frameworks, Jacob A. Johnson

Department of Chemistry: Dissertations, Theses, and Student Research

Metal-Organic Frameworks (MOFs) are a class of nanoporous crystalline materials constructed via the interconnection between metal-ions/inorganic clusters and organic ligands. Since the surface area, pore size and distribution, and chemical functionalities of MOFs are highly tunable via the judicious combinations of inorganic clusters and organic ligands, MOFs have attracted intensive interests for a variety of applications including gas adsorption and separation, catalysis, chemical sensing, and drug delivery among others. Porphyrin based ligands are of particular interest for building functional MOFs due to their unique photo-, electro-, and catalytic properties. In addition, the four-fold symmetry of porphyrin ligands offers an effective …


Design And Synthesis Of Dynamic Covalent Polymer Scaffolds With Controlled Architectures, Emily Annette Hoff Dec 2016

Design And Synthesis Of Dynamic Covalent Polymer Scaffolds With Controlled Architectures, Emily Annette Hoff

Dissertations

The design and synthesis of functional, controlled polymer architectures is essential to the development of new materials with precise and tailorable properties or applications. The work described in this dissertation focuses on the development of controlled polymer architectures with dynamic linkages for the design of multifunctional materials and surfaces via robust, efficient, and stimuli-responsive strategies.

In Chapter III, a post-polymerization modification strategy based on ambient temperature nucleophilic chemical deblocking of polymer scaffolds bearing N-heterocycle blocked isocyanate moieties is reported. Room temperature RAFT polymerization of three azole-N-carboxamide methacrylates, including 3,5-dimethyl pyrazole, imidazole, and 1,2,4-triazole derivatives, afforded reactive polymer scaffolds …


Photodynamic Killing Of Human Cancer Cells With Smart Photosensitizer Materials And An Endoscopic Implement For Singlet Oxygen Delivery, Mihaela N. Minnis Sep 2016

Photodynamic Killing Of Human Cancer Cells With Smart Photosensitizer Materials And An Endoscopic Implement For Singlet Oxygen Delivery, Mihaela N. Minnis

Dissertations, Theses, and Capstone Projects

The thesis describes progress on probe tips for a microoptic device for the precise delivery of the components necessary for photodynamic therapy (PDT) in a highly localized and controllable fashion. The thesis also summarizes results of a photosensitized oxidation study. The work focused on i) developing a photoactive fluoropolymer surface that will release sensitizer drug molecule for use in PDT, ii) designing new probe tips surfaces for use as sensitizer support for a microoptic PDT device, iii) exploring strategies for covalent attachment of sensitizers and model compounds to Teflon/PVA surfaces with the aim of being coupled with our microoptic device, …


A Comparison Of Solvent And Water-Borne Alkyd Coatings And The History Of Voc Regulations In The United States, Molly Elise Burns Sep 2016

A Comparison Of Solvent And Water-Borne Alkyd Coatings And The History Of Voc Regulations In The United States, Molly Elise Burns

Master's Theses

A Comparison of Solvent and Water-Borne Alkyd Coatings Abstract

Conventional solvent based alkyd coatings have gone out of favor due to concerns over volatile organic compound (VOC) content. However, due to recent focus on renewable raw materials, alkyds are making a comeback in waterborne form. Water based alkyd coatings are known to have poor shelf stability and corrosion resistance, as well as other problems during the formulation process. This project focused on comparing solvent borne to two types of water-borne alkyds, water reducible alkyds and alkyds emulsions. The purpose was to understand the differences between the three types of alkyds …


Discrimination Of Chiral Copper(Ii) Complexes Upon Binding Of Galactonoamidine Ligands, Susanne Striegler, Jessica Pickens Aug 2016

Discrimination Of Chiral Copper(Ii) Complexes Upon Binding Of Galactonoamidine Ligands, Susanne Striegler, Jessica Pickens

Chemistry & Biochemistry Faculty Publications and Presentations

The coordination between N-p-methylbenzyl-D-galactonoamidine, a putative transition state analogue of the hydrolyis of glycosidic bonds, and symmetric and chiral binuclear copper(II) complexes was characterized by spectroscopic titration, isothermal titration calorimetry, circular dichroism spectroscopy, and DFT calculations to elucidate the binding sites in the carbohydrate upon coordination to selected metal complexes. For the formation of metal complex-glyconoamidine assemblies, contributions of the amidine site and of the hydroxyl group at C-2 in the glycon of the amidine are noted. The chiral complexes S- and R-Cu2bpdbo are discriminated by a third binding site in the carbohydrate that leads to higher stability of complexes …


Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou Aug 2016

Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou

STAR Program Research Presentations

Metal organic frameworks are synthetic porous materials with great capacity for adsorption of carbon dioxide and methane. They chemically appear as a chain-link fence with nodes of metal connected by organic linkers. The pores between the nodes define the characteristics of the material, allowing gas particles of specific size to pass through while blocking larger particulates. While there has been success in synthesizing small amounts of metal organic frameworks, the mechanistic details behind their assembly remain unknown. Understanding the synthesis mechanism is necessary to understand the kinetics involved and be able to produce this useful material on an industrial scale. …


Correlation Of Polymer Performance And Hansen Solubility Parameters, Daniel Jobse Mania Aug 2016

Correlation Of Polymer Performance And Hansen Solubility Parameters, Daniel Jobse Mania

Master's Theses

Ready-to-use (RTU) grout is becoming more important to the finish and remodeling construction industry. Market research shows it is a fast-growing product that not only is creating its own space, but is beginning to supplant existing technology.

The original intent of this research was to investigate formulation parameters and how they affect grout performance. It was learned that particle size and oil absorption (OA) value are important filler properties that affect performance as much as adequate packing density and optimal pigment volume concentration (PVC) without going beyond critical PVC (CPVC).

Polymer architecture was also determined to be extremely important, but …


Mida Boronates Are Hydrolysed Fast And Slow By Two Different Mechanisms, Jorge A. Gonzalez, O. Maduka Ogba, Gregory F. Morehouse, Nicholas Rosson, Kendall N. Houk, Andrew G. Leach, Paul H.-Y. Cheong, Martin D. Burke, Guy C. Lloyd-Jones Jul 2016

Mida Boronates Are Hydrolysed Fast And Slow By Two Different Mechanisms, Jorge A. Gonzalez, O. Maduka Ogba, Gregory F. Morehouse, Nicholas Rosson, Kendall N. Houk, Andrew G. Leach, Paul H.-Y. Cheong, Martin D. Burke, Guy C. Lloyd-Jones

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

MIDA boronates (N-methylimidodiacetic boronic acid esters) serve as an increasingly general platform for building-block-based small molecule construction, largely due to the dramatic and general rate differences with which they are hydrolysed under various basic conditions. Yet the mechanistic underpinnings of these rate differences have remained unclear, hindering efforts to address current limitations of this chemistry. Here we show that there are two distinct mechanisms for this hydrolysis: one is base-mediated and the other neutral. The former can proceed more than three orders of magnitude faster, and involves rate-limiting attack at a MIDA carbonyl carbon by hydroxide. The alternative ‘neutral’ hydrolysis …


Synthesis And Characterization Of "Click Inspired" Thiol-Ene-Fullerene Nanocomposites, Amber Danielle Windham May 2016

Synthesis And Characterization Of "Click Inspired" Thiol-Ene-Fullerene Nanocomposites, Amber Danielle Windham

Dissertations

This work explores the covalent incorporation of C60 and Sc3N@C80 fullerenes into thiol-ene networks by a facile, one-pot photochemical reaction with multifunctional thiol and alkene monomers. Synthesis of disulfide bonds within the tri-functional thiol monomer served to photochemically initiate the reaction when cleaved. This was followed by thermal curing of the pre-polymer for preparation of fullerene-containing thiol-ene films. Films were characterized by standard techniques including infrared spectroscopy, gel percent, and thermogravimetric analysis. The role of C60 and Sc3N@C80 as suitable alkenes for free-radical reaction with multifunctional thiols was investigated by preparing a …


Curing Of Polymer Thermosets Via Click Reactions, Mark Richard Brei May 2016

Curing Of Polymer Thermosets Via Click Reactions, Mark Richard Brei

Dissertations

In the first project, an azide functional resin and tetra propargyl aromatic diamines were fabricated for use as a composite matrix. These systems take already established epoxy/amine matrices and functionalize them with click moieties. This allows lower temperatures to be used in the production of a thermoset part. These new systems yield many better mechanical properties than their epoxy/amine derivatives, but their Tgs are low in comparison.

The second project investigates the characterization of a linear system based off of the above azide functional resin and a difunctional alkyne. Through selectively choosing catalyst the linear system can show …