Materials Chemistry Commons^™

Influence Of Shelling Temperature And Time On The Optical And Structural Properties Of Cuins2/Zns Quantum Dots, Colette Robinson

Graduate Theses and Dissertations

CIS/ZnS core/shell QDs are an important class of nanomaterials for optoelectronic, photovoltaic and photoluminescence applications. They consist of lower toxicity materials than the prototypical II-VI Cd-based QDs and show long fluorescence lifetimes, which generates prospective in biological imaging applications. It is vital to develop reproducible synthetic methods for this new class of nanomaterials in order to maintain small sizes with high QYs. CIS core QDs have been shelled with ZnS at various temperatures from 90-210°C for reaction times ranging from 20-140 minutes to examine the role of thermodynamics and kinetics on the shell growth. Using HR-TEM and ICP-MS, it was …

Fluorinated Metallo Phthalocyanines For Chemical And Biological Catalysis, Hemantbhai H. Patel

Seton Hall University Dissertations and Theses (ETDs)

The rational design of robust oxidation catalysts based on organic molecules is hindered by the presence of labile C-H bonds. We have shown recently that replacing all C-H bonds by a combination of fluoro- and perfluoro-groups in a bioinspired Cytochrome P450 model based on a phthalocyanine, Pc, scaffold results in a stable yet reactive oxidation catalyst. The Pc cobalt complex catalyzes, for example, the aerobic oxidation of thiols to disulfides, a reaction of both biological significance and industrial importance.

The presence of robust C-F bonds, however, renders the catalyst unsuitable for attachment to solid-state supports, except via van der Waals …

Analysis Of The Fabrication Conditions In Organic Field-Effect Transistors, Rachel M. Rahn, Yan Zhao, Jianguo Mei

The Summer Undergraduate Research Fellowship (SURF) Symposium

Polymer-based organic field-effect transistors have raised substantial awareness because they enable low-cost, solution processing techniques, and have the potential to be implemented in flexible, disposable organic electronic devices. The performance of these devices is highly dependent on the processing conditions, as well as the intrinsic properties of the polymer. Processing conditions play an important role in semiconductor film formation and device performance. These factors may provide an important link between structure and performance. In this study, an empirical analysis tool, Process Scout, was applied to assess processing factors such as polymer concentration and silicon modification. This sanctioned the creation of …

Synthesis And Flammability Testing Of Epoxy Functionalized Phosphorous-Based Flame Retardants, Vladimir Benin, Xuemei Cui, Alexander Morgan, Karl Seiwert

Chemistry Faculty Publications

Several potential new phosphorus-containing flame retardant molecules were evaluated for heat release reduction potential by incorporation of the molecules into a polyurethane, generated from methylene diphenyl diisocyanate and 1,3-propane diol. The heat release reduction potential of these substances was evaluated using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods to qualitatively evaluate their potential reactivity into the polyurethane prior to heat release testing. The functionality of the flame retardants was epoxide based that would potentially react with the diol during polyurethane synthesis. Flammability testing …

Tempo-Containing Romp Polymers As A Component For Treatment Of Traumatic Brain Injuries, Cameron H. Feriante

Honors College Theses

During a traumatic brain injury (TBI) sustained in combination with hemorrhagic shock the brain undergoes anoxic conditions resulting from swelling and blood loss. Traditional intravenous solutions are used to replace blood volume, but are unable to replace the blood’s oxygen carrying capacity. A proposed treatment based on isotonic solutions containing hemoglobin-based oxygen carriers (HBOC’s) which were intended to provide readily available oxygen was developed. However, cell-free hemoglobin was shown to have excessive oxidative potential. Polynitroxylated Pegylated Hemoglobin (PNPH) was developed to address this shortcoming. During PNPH synthesis a combination of polyethylene glycol (PEG) and (2,2,6,6-tetramethylpiperidin-1-yl)oxidanyl (TEMPO), is bound to the …

Green Chemistry As A Tool For Understanding The Toxic Substances Control Act: A Lecture Module For Undergraduate Students, Molly R. Blessing

Honors Scholar Theses

The Toxic Substances Control Act (TSCA) is the central form of chemical regulation existent in the United States today, yet scientists are often unaware or uncertain of its provisions. Violations of TSCA by unknowing chemists set industry and government unnecessarily at odds. A lecture on TSCA was developed for undergraduate students that uses the concept of green chemistry to promote interest and incentivize learning. Green chemistry methods are cleaner and less wasteful than traditional chemical ones, and many companies using them are at the forefront of technological innovation. The lecture explains both green chemistry and TSCA, includes company case studies, …

Inhalable Nanocomposites And Anticancer Agents For Cancer Therapy, Nathanael A. Stocke

Theses and Dissertations--Chemical and Materials Engineering

Cancer is designated as the leading cause of mortality worldwide and lung cancer is responsible for nearly 30% of all cancer related deaths. Over the last few decades mortality rates have only marginally increased and rates of recurrence remain high. These factors, among others, suggest the need for more innovative treatment modalities in lung cancer therapy. Targeted pulmonary delivery is well established for treating pulmonary diseases such as asthma and provides a promising platform for lung cancer therapy. Increasing local deposition of anticancer agents (ACAs) and reducing systemic exposure of these toxic moieties could lead to better therapeutic outcomes and …

Unhindered Triangulene Salt Pairs: Substitution-Dependent Contact Ion Pairing And Complex Solvent-Separated Discotic Ions In Solution, Subrahmanyam Modekrutti

Theses and Dissertations--Chemistry

This work sought to enforce aromatic interactions between compatible π-molecular orbital systems with ionic bonding. In this case the interacting partners are oppositely charged discotic triangulene derivatives. The observed properties of the heterodimeric ion-pairs likely arise due to a hypothetical synergy between electrostatics and π-interactions. The work presented here describes investigation of putative covalency arising from this hypothetical synergy in the electrostatics driven π-stacking. In order to probe this, various hypotheses were made and experiments were designed to test their validity. The results from the experiments show existence of contact ion-pairs and complex solvent-separated discotic ions in solution. The formation …

Diazaborole Linked Porous Polymers: Design, Synthesis, And Application To Gas Storage And Separation, Zafer Kahveci

Theses and Dissertations

The synthesis of highly porous organic polymers with predefined porosity has attracted considerable attention due to their potential in a wide range of applications. Porous organic polymers (POPs) offer novel properties such as permanent porosity, adjustable chemical nature, and noteworthy thermal and chemical stability. These remarkable properties of the POPs make them promising candidates for use in gas separation and storage. The emission of carbon dioxide (CO₂) from fossil fuel combustion is a major cause of global warming. Finding an efficient separation and/or storage material is essential for creating a cleaner environment. Therefore, the importance of the POPs …

Heat Release Of Polyurethanes Containing Potential Flame Retardants Based On Boron And Phosphorus Chemistries, Vladimir Benin, Bastien Gardelle, Alexander Morgan

Chemistry Faculty Publications

Using a polyurethane of methylene diphenyl isocyanate and 1,3-propane diol, several new non-halogenated aromatic boron and phosphorus flame retardants were evaluated for heat release reduction potential using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods, and were then analyzed via spectroscopic methods to determine if the flame retardant was still present in the final product. PCFC testing on the resulting products showed that the flame retardant molecule can have different effects on heat release depending upon how it is mixed into the polyurethane. Some …

Determination Of Corrosion Inhibitor Lubricity Improver In Jet Fuel By Liquid Chromatography-Electrospray Ionization Mass Spectrometry, David W. Johnson, Milissa Flake, Ryan Adams

Chemistry Faculty Publications

Military jet fuel (JP-8) is very similar to commercial jet fuel (Jet A) except for the presence of three additives, fuel system icing inhibitor, corrosion inhibitor–lubricity improver (CI-LI), and antistatic additive, which are added to improve characteristics of JP-8. Of particular interest is the CI-LI additive; the most common active ingredient is a dimer of linoleic acid. This article focuses on quantification of the active ingredient in the CI-LI additive by liquid chromatography–mass spectrometry (LC–MS). This method will allow the determination of CI-LI content in military jet fuel samples.

Enhancing The Photovoltaic Performance Of P3ht/Pdib Silsesquioxane Donor-Acceptor System Using Spray Deposition Fabrication Technique, Venkata Ramana Manda

Masters Theses & Specialist Projects

In the past few years, the solution-processed organic based solar cells gained more importance by meeting the demands for cost effective photovoltaic devices. To date, the focus of the organic photovoltaic devices has been on the optimization of the processing the materials to improve photo conversion efficiency and also by modifying the active components of the organic materials. Recently, it has been recognized that the deposition techniques also plays a major role in enhancing the power conversion efficiencies. Currently, though the most common deposition technique for organic solar cells is spin coating, which does not allow scaling up of the …

Porphyrin Cross-Linkers For Generating Soluble Molecularly Imprinted Polymers From Polyethyleneimine, Mohammed R. Elshaer

Seton Hall University Dissertations and Theses (ETDs)

Molecular recognition is vital to many biochemical processes and is at the heart of promising bio-medically related technologies. Molecular imprinting has a long-standing history as a successful method for mimicking the molecular recognition phenomena exhibited by nature, whereby artificial receptors are prepared for a given target molecule based on synthetic polymers. The molecularly imprinted polymer (MIP) contains a three dimensional network with a memorized cavity specific to the shape and functionality of the templated target molecule. The utility of traditional MIPs has been limited due to an inherent lack of solubility. We have worked toward developing a system that allows …

Synthesis And Characterization Of Sugar Based Low Molecular Weight Gelators And The Preparation Of Chiral Sulfinamides, Hari Prasad Reddy Mangunuru

Chemistry & Biochemistry Theses & Dissertations

Low molecular weight gelators (LMWGs) have received considerable attention in the field of chemistry from last few decades. These compounds form self-assembled fibrous networks like micelles, cylindrical, sheets, fibers, layers and so on. The fibrous network entraps the solvent and forms gel, because of the self-assembly phenomenon and their demonstrated potential uses in a variety of areas, ranging from environmental to medicinal applications.

Sugars are good starting materials to synthesize the new class of LMWG's, because these are different from some expensive materials, these are natural products. We have synthesized and characterized the LMGS's based on D-glucose and D …

Science Classics, Mark Masthay

Chemistry Faculty Publications

An essay on the impact of the works in the Imprints and Impressions: Milestones in Human Progress, an exhibition of rare books from the collection of Stuart Rose. Exhibition was held Sept. 29-Nov. 9, 2014, at the University of Dayton.

Electrode And Electrolyte Additives For Lifetime Extension In Lithium-Ion Batteries, Kishore Anand Narayana

Theses and Dissertations--Chemistry

Lithium-ion batteries (LIBs) are the most commonly used type of rechargeable batteries with a global market estimated at $11 billion, which is predicted to grow to $60 billion by 2020. The global commercialization of Li-ion batteries is impeded by issues such as poor cycle life (5000 cycles achieved in some LIBs) in high energy and power density applications because of the rising internal resistance due to aging and safety concerns such as overcharge which ultimately leads to thermal runaway and explosions. A battery’s performance mainly depends on external factors such as electrode thickness and degree of compacting, and the type …

Phosphate Esters, Thiophosphate Esters And Metal Thiophosphates As Lubricant Additives, David W. Johnson, John E. Hils

Chemistry Faculty Publications

Phosphate esters, thiophosphate esters and metal thiophosphates have been used as lubricant additives for over 50 years. While their use has been extensive, a detailed knowledge of how they work has been a much more recent development. In this paper, the use of phosphate esters and thiophosphate esters as anti-wear or extreme pressure additives is reviewed with an emphasis on their mechanism of action. The review includes the use of alkyl phosphates, triaryl phosphates and metal containing thiophosphate esters. The mechanisms of these materials interacting with a range of iron and steel based bearing material are examined.

Structure, Theoretical Studies And Coupling Reactions Of Some New Cyclic Boronic Esters, Andrew Kuttler, Sravanthi Durganala, Albert Fratini, Alexander Morgan, Vladimir Benin

Chemistry Faculty Publications

The present report describes the X-ray structural and theoretical studies of some new pinacolboronate esters, and it also outlines the use of the target structures in Suzuki coupling reactions to produce new aromatic or heteroaromatic esters and amides. X-ray structural analysis of the studied compounds revealed that the pinacolborane ring's position with respect to the benzene ring varies, depending on the particular environment. An ortho-positioned carboxylic ester (methyl ester) causes a nearly perpendicular orientation of the pinacolborane unit with respect to the benzene ring, whereas an ortho-positioned amide (N,N-dimethylamide) causes the pinacolborane unit to orient itself nearly coplanar. A plausible …

Characterization By Nmr Of Reactants And Products Of Hydrofluoroether Isomers, Cf3(Cf2)3och3 And (Cf3)2c(F)Cf2och3, Reacting With Isopropyl Alcohol, Howard Knachel, Vladimir Benin, William E. Moddeman, Janine C. Birkbeck, Thomas A. Kestner, Tayna L. Young

Chemistry Faculty Publications

The 3M Company product Novec™ 71IPA DL, a mixture of methoxyperfluorobutane, methoxyperfluoroisobutane and 4.5 wt.% isopropyl alcohol, has been found to be very stable at ambient temperature, producing fluoride at the rate of ~1 ppm/year. Our earlier kinetic and theoretical studies have identified the reaction mechanism. This paper identifies the ¹H and ¹⁹F NMR chemical shifts, multiplicities, and coupling constants of reactants and the major products that result from aging the mixture in sealed Pyrex NMR tubes for periods up to 1.8 years at temperatures from 26 °C to 102 °C. Chemical shifts and coupling constants of fluorine …

Latent Cysteine Residues From Polymers Prepared Via Free And Controlled Radical Polymerizations, Douglas Vincent Amato

Master's Theses

One less commonly used “click” reaction is thiazolidine chemistry. Thiazolidine chemistry is a commonly used reaction used in biological systems because the reaction requires the presence of both cysteine (a common amino acid) and an aldehyde or ketone. If cysteine residues could be incorporated into a polymer then a variety of applications could be developed. Polymers containing free thiols (aka thiomers) have developed in the last decade to become great mucoadhesives. If there was a facile route to control the amount of free thiols along the polymer then more fine-tuned and potentially stronger adhesives could be made. For these reasons …

Re-Healable Coating Based Upon Thermally Responsive Linkages, Dahlia Ningrum Amato

Master's Theses

The goal of this thesis was to design thermally responsive polyol resins that would be compatible with isocyanates. Two approaches were made to reach this goal, the first involved functionalizing soybean oil and the second involved post-polymerization modification of a methacrylate based resin.

A soybean based coating with thermally responsive Diels-Alder linkages has been prepared following an automotive two-component formulation. The resulting coatings displayed the capability to be healed following physical deformation by a thermal stimulus, and such a material has significant potential for end users. Various curing agents were employed, and resulted in variation of scratch resistance and re-healablity. …

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils

Chemistry Faculty Publications

One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two different stainless steels at varying temperatures ranging from 300 °C to 350 °C in vacuum. Significant decomposition of the lubricant base-stocks and the phosphate ester additive did occur in most of the trials resulting in the formation of carboxylic acids and phenols. …

Diffusion Of Vitamin B12 Across A Mesoporous Metal Organic Framework, Veronica Valencia

Undergraduate Journal of Mathematical Modeling: One + Two

We measure the rate of uptake and the rate of release of a Vitamin B12 solution (dissolved in water) at 2 different temperatures (room temperature and 37°C) by the mesoporous metal organic framework TbMOF-100 at 1-hour intervals using a spectrophotometer. Using the Beer-Lambert law, we calculate the concentration of the stock solution based on the absorbance values obtained with the spectrophotometer. These values allow for the quantification of the initial rate of uptake and the rate of uptake at a random incubation time of the Vitamin B12 by the TbMOF-100. We also calculate the value of the coefficient of diffusion …

Preparation Of Phosphonoterephthalic Acids Via Palladium-Catalyzed Coupling Of Aromatic Iodoesters, Nathaniel Ivan, Vladimir Benin, Alexander Morgan

Chemistry Faculty Publications

The current article reports in detail the preparation of two phosphonoterephthalic acids: 2-phosphonoterephthalic acid (1) and 2,5-diphosphonoterephthalic acid (2). Efficient, scalable syntheses have been developed for both compounds based on Pd-catalyzed coupling reactions of iodinated terephthalate esters. Phosphonoterephthalic acids are potentially useful as flame-retardant additives or as monomers for the construction of acid-pendant polymer chains.

Reaction Between Polyol-Esters And Phosphate Esters In The Presence Of Metal Carbides, David W. Johnson, Carolyn Iacullo, John E. Hils

Chemistry Faculty Publications

The reaction of metal carbides with polyol esters found in aerospace lubricants and phosphate esters commonly used as additives was investigated. Carbides were of particular interest since modern materials under consideration at high temperature bearings have surfaces that are primarily metal carbides. Vanadium and chromium carbide were found to react with the ester and phosphate ester by a transesterification reaction, producing an alkyl phosphate which is less stable than the aromatic phosphate esters. In the process, the metal carbide is converted to the metal phosphate and metal polyphosphate, evidenced by the infrared and Raman spectra of the solid residue and …

Synthesis And Modification Of Octafluoro[2.2]Paracyclophane (Parylene Af4), Craig Hicks, Brendan Duffy, Gráinne Hargaden

Articles

Parylenes are a class of organic compounds which have gained significant attention due to their application as coatings in areas such as medical devices and electronics. This review highlights the development of synthetic pathways to Octafluoro[2.2]Paracyclophane, commonly referred to as parylene AF4. Methods which have been used to functionalise AF4 are also presented.

Optimization Of The Optical And Electrochemical Properties Of Donor-Acceptor Copolymers Through Functional Group And Side Chain Modification, Mark J. Seger

Theses and Dissertations--Chemistry

Donor-acceptor copolymers have received a great deal of attention for application as organic semiconductors, in particular as the active layers in low-cost consumer electronics. The functional groups grafted to the polymer backbones generally dictate the molecular orbital energies of the final materials as well as aid in self-assembly. Additionally, the side chains attached to these functional groups not only dictate the solubility of the final materials, but also their morphological characteristics. The bulk of the research presented in this dissertation focuses on the synthesis and structure-property relationships of polymers containing novel acceptor motifs. Chapter 2 focuses on the synthesis of …

Acenes And Acenequinones For Optics And Organic Electronics, Matthew Bruzek

Theses and Dissertations--Chemistry

Acenes have been explored by a number of research groups in the field of organic electronics with a particular emphasis on transistor materials. This group has been actively studying acene‐based organic semiconductors for more than a decade using a crystal engineering approach and has developed acene derivatives for applications in field‐effect transistors, light‐emitting diodes, and photovoltaics. In addition to organic electronics, crystal engineering has important applications in a number of other fields, quite notably in the design of metal‐organic frameworks. Chapters 2 and 3 of this dissertation focus on applying crystal engineering to the synthesis of acene derivatives for use …

N-Doped Multiwalled Carbon Nanotubes: Functionalization, Characterization And Application In Li Ion Batteries, Aman Preet Kaur

Theses and Dissertations--Chemistry

The focus of this dissertation is to utilize chemical functionalization as a probe to investigate the reactivity of N-doped multiwalled carbon nanotubes (N-MWCNTs). The surface of N-MWCNTs, being a set of potentially reactive graphene edges, provides a large number of reactive sites for chemical modification, so considerable changes in chemical and physical properties can be envisaged. We observed that both reduction (dissolving metal reduction/alkylation) and oxidation (H₂SO₄/HNO₃ and H₂SO₄/KMnO₄ mixtures) of N-MWCNTs lead to formation of interesting spiral channels and spiraled carbon nanoribbons. A variety of techniques, including TGA, SEM, …

Efficient Electrochemical Functionalization Of Carbon Nanotubes And Carbon Nanotube Membranes For Energy, Drug Delivery And Potential Catalysis Applications, Xin Zhan

Theses and Dissertations--Chemistry

Electrochemical diazonium grafting offers versatile functionalization of chemically inert graphite under mild condition, which is particularly suitable for CNT composite modification. Tetrafluorinated carboxylphenyl diazonium grafting provides the most controllable functionalization chemistry allowing near monolayer levels of functionality on carbon nanotubes. The functional density was successfully quantified by anion selective dye-assay and X-ray photoelectron spectroscopy (XPS) of thiol-Au self-assembled monolayers (SAM) as a calibration reference. This technique enables monolayer functionality at the tips of carbon nanotube membranes for biomimetic pumps and valves as well as thin conductive layers for CNT-based high area electrochemical support electrodes.

Double-walled carbon nanotube (DWCNT) membranes were …