Materials Chemistry Commons^™

Highly Flame Retardant And Bio-Based Rigid Polyurethane Foams Derived From Orange Peel Oil, Chunyang Zhang

Electronic Theses & Dissertations

Polyurethane is an important class of polymer which is being used for various industrial applications in the form of rigid foams, flexible foams, thermoplastic, elastomer, coating, and adhesive. Especially there is a huge market for rigid polyurethane foams for their applications as thermal insulating material in building and housing. In general, polyurethanes are prepared using polyols and diisocyanates. Most of the polyols used by industries are petrochemical based. In this project, a novel polyol from an orange peel oil-based derivative, limonene dimercaptan, was synthesized using one step photochemical thiol-ene reaction. The synthesized polyol was used to prepare flame retardant polyurethane …

Higher Energy Gap Control Of Fluorescence In Conjugated Polymers, Chien-Hung Chiang

LSU Doctoral Dissertations

Chemo- and biosensors based on fluorescent conjugated polymer benefit from greater detection sensitivity due to amplification of the electronic perturbations produced by analyte binding. This amplification stems from the exciton-transporting properties of conjugated polymers. A conventional design paradigm relies on the analyte binding events which generate sites of lower energy relative to the polymer energy: either fluorescence quenching sites (turn-off sensors) or bathochromically shifted fluorophores (turn-on sensors). In both type sensors, the excitons migrate to the lower-energy site created by analyte binding.

This dissertation primarily focused the investigation of an alternative paradigm when analyte binding creates higher energy gap sites …

Systematic Size Control In The Synthesis Of Zero-Valent Iron Nanoparticles, Grant C. Bleier

Chemistry and Chemical Biology ETDs

A novel synthetic method for the production of highly magnetic, low size-dispersity nanoparticles through reversible magnetic agglomeration is introduced and studied in detail. Initially, a weakly coordinating surfactant (3-octadecyl-2,4-pentanedione) is employed to produce a wide range of nanoparticle sizes ranging from 8 to 20 nm in diameter. The kinetics faced in these reactions by cheap and widely available iron complex precursors can be avoided in this method with the introduction of thermodynamic control, which occurs in the form of a magnetic precipitation event that essentially halts nanoparticle growth. Utilizing this synthetic method, the length of the alkyl chain on the …

Lignin Depolymerization: Mechanistic Analysis, Optimization And Application, Eric Michael Nagel

Electronic Theses and Dissertations

Lignin is the most abundant aromatic biopolymer and is a potential source for phenolic chemical feedstocks. Lignin is composed of phenolic units connected by more than eight different linkages, the most common being β-O-4 which constitutes 50-60%. The hydrothermal decomposition of a guaiacol based β-O-4 lignin dimer was studied under neutral and basic conditions to elucidate the mechanism of β-O-4 bond cleavage and the formation of downstream products. Phenol-carbonyl condensation and vinyl-ether formation were shown to be the primary causes for low monomer yields under the tested conditions. Three Ni catalyst systems, Ni/C + H₂, Ni/C-Zn, and Ni/Zn, …

Cascade Annulation And Ring-Opening Reactions Of Castagnoli-Cushman-Derived Allylic And Benzylic Thiomorpholinonates, Abdikani Omar Farah

All Master's Theses

Sulfur-containing compounds are prevalent in antibiotics, essential amino acids, bacterial RNA, food flavors, and enzymes. The divalent sulfur atom introduces a metabolic liability from a drug discovery standpoint. Indeed, it is quite telling that all the top ten best-selling drugs in 2012 contained sulfur. In this context, there is a growing need for the synthesis of sulfur-containing compounds in ways that are practical and cost-effective. One approach taken to achieve this goal is to employ diversity-oriented synthesis (DOS), which produces diverse complex molecules with similar core structures from a common precursor. When a DOS features a cascade or domino reaction …

Study Of The Effect Of Steric Bulk Of Side Chains On The Properties Of Conjugated Polymers, Bei Zhang

Theses and Dissertations--Chemistry

Donor-acceptor conjugated polymers opened a new era for conjugated polymer research due to the abundant selection and combination of different conjugated units. This class of polymers function as semiconductor materials with potential application in plastic consumer electronics. The frontier molecular orbital energies of the polymers are generally determined by the selection of donor and acceptor units in the backbone structure, and their substituents. The side chains attached to the backbone not only affect the solubility of the materials, but also their self-assembly and morphological characteristics, which indirectly govern optoelectronic properties. It is important therefore to consider backbone architectures and the …

Design And Synthesis Of Functional Organic Materials, Anthony Joseph Petty Ii

Theses and Dissertations--Chemistry

Control of solid state ordering in conjugated small molecules is paramount to the continued development and implementation of organic materials in electronic devices. However, there exists no reliable method on which to predicatively determine how a change to the molecular structure will impact the solid-state packing. As such, the molecule must be synthesized before its solid-state packing can be definitively evaluated. However, once the packing structure of a material is known there exist both qualitative structure- function relationships derived from the literature, as well as quantitative computational methods that can be employed to suggest if a material will perform well …

The Effect Of Oxidation, Thionation, And Dimerization On The Self-Assembly And Photophysical Properties Of Novel Discotic Materials, Katie M. Psutka

Theses and Dissertations (Comprehensive)

This thesis aims to increase understanding of the relationship between molecular structure and liquid crystalline temperature range by exploring the effects of oxidation, thionation, and dimerization on the self-assembly and properties of novel discotic materials. First, two alkoxy-substituted dibenzanthracenequinones were prepared by oxidation of the corresponding dibenzanthracenes. The quinone induced a liquid crystalline phase in the hexaalkoxy dibenzanthracene derivative, but not in the tetralkoxy derivative. However, both of the resulting materials were un-reactive to any further synthetic modifications that could be used to improve their properties. In comparison, two heteroaromatic dithienoanthracenedicarboximides were successfully prepared, although the addition of the thiophene …

Synthesis Of Healable Organic Semiconductor Through Dioxaborolane Bond, Junchen Liu, William W. Mcnutt, Jianguo Mei

The Summer Undergraduate Research Fellowship (SURF) Symposium

The field of organic semiconductors have gained enormous attention the past few decades. Organic materials offer numerous advantages over their inorganic counterparts. Recently a number of works have demonstrated organic semiconductors with healable properties. We aim to investigate the healable ability of an organic semiconductor by mimicking a vitrimer system through the reversible dioxaborolane bond. Vitrimers are polymers with reversible crosslink system. It has been reported that the use of the borane-oxygen bond as the crosslink showed good mechanical performance. The electrical properties will be inspected for the vitrimer-like polymer. In this report we describe a Diketopyrrolopyrrole base polymer incorporating …

Enediyne Derived Conjugated Polymers, Keda Hu

Chemistry and Chemical Biology ETDs

The advance of conjugated polymers (CPs) is largely relied on the development of new polymerization methods, the discovery of novel polymers that possess unique chemical and physical properties, and understanding of their structure-property relationship. We have employed a set of trans-enediynes (trans-EDYs) for the preparation of four series of CPs, polydiacetylenes (PDAs), platinum-segmented PDAs, polytriacetylenes (PTAs) and boron doped polyacetylenes (BPAs). The resulting polymers displayed interesting optical and electrochemical properties which could be fine-tuned by the attachment of various side chains on the EDY moieties. We have applied acyclic EDY metathesis for the synthesis of PDAs, a class of CPs …

Synthesis Of Multifunctional Polyacrylates And A Binding Group To Hemoglobin For The Treatment Of Traumatic Brain Injuries, Marina Michaud

Honors College Theses

Hemoglobin based oxygen carriers (HBOCs) hold promise as an effective emergency treatment of severe traumatic brain injuries (TBI). In the latest generation of HBOCs, polynitroxyl-pegylated hemoglobin (PNPH), cell-free hemoglobin is modified with TEMPO and PEG which reduce the toxicities associated with earlier generations of HBOCs. In our efforts to optimize the economic and therapeutic impacts of PNPH’s we have synthesized polydimethylaminoethyl methacrylate (poly-DMAEMA) under controlled living conditions via reverse addition-fragmentation chain transfer (RAFT) polymerization. The poly-DMAEMA was then successfully functionalized via quaternization of its NMe₂ groups using chloroacetate derivatives of the TEMPO and PEG. This process was quantitative and …

Heterogeneous Base Metal Catalyzed Oxidative Depolymerization Of Lignin And Lignin Model Compounds, John Adam Jennings

Theses and Dissertations--Chemistry

With the dwindling availability of petroleum, focus has shifted to renewable energy sources such as lignocellulosic biomass. Lignocellulosic biomass is composed of three main constituents, lignin, cellulose and hemicellulose. Due to the low value of cellulosic ethanol, utilization of the lignin component is necessary for the realization of an economically sustainable biorefinery model. Once depolymerized, lignin has the potential to replace petroleum-derived molecules used as bulk and specialty aromatic chemicals. Numerous lignin depolymerization strategies focus on cleavage of β-aryl ether linkages, usually at high temperatures and under reductive conditions.

Alternatively, selective benzylic oxidation strategies have recently been explored for …

Acenes, Heteroacenes And Analogous Molecules For Organic Photovoltaic And Field Effect Transistor Applications, Devin B. Granger

Theses and Dissertations--Chemistry

Polycyclic aromatic hydrocarbons composed of benzenoid rings fused in a linear fashion comprise the class of compounds known as acenes. The structures containing three to six ring fusions are brightly colored and possess band gaps and charge transport efficiencies sufficient for semiconductor applications. These molecules have been investigated throughout the past several decades to assess their optoelectronic properties. The absorption, emission and charge transport properties of this series of molecules has been studied extensively to elucidate structure-property relationships. A wide variety of analogous molecules, incorporating heterocycles in place of benzenoid rings, demonstrate similar properties to the parent compounds and have …

Thermal Conductivities Of Organic Semiconductors, Yulong Yao

Theses and Dissertations--Physics and Astronomy

Organic semiconductors have gained a lot of interest due to their ease of processing, low-cost and inherent mechanical flexibility. Although most of the research has been on their electronic and optical properties, knowledge of the thermal properties is important in the design of electronic devices as well. Our group has used ac-calorimetric techniques to measure both in-plane and transverse thermal conductivities of a variety of organic semiconductors including small-molecule crystals and polymer blends. For layered crystals composed of molecules with planar backbones and silylethynyl (or germylethynyl) sidegroups projecting between the layers, very high interplanar thermal conductivities have been observed, presumably …

Preparation And Evaluation Techniques Of Porous Materials And Mixed Matrix Membranes For Targeted Co2 Separation Applications, Tsemre Tessema

Theses and Dissertations

The use of porous sorbents for physisorptive capture of CO₂ from gas mixtures has been deemed attractive due to the low energy penalty associated with recycling of such materials. Porous organic polymers (POPs) have emerged as promising candidates with potential in the treatment of pre- and post- fuel combustion processes to separate CO₂ from gas mixtures. Concurrently, significant advances have been made in establishing calculation methods that evaluate the practicality of porous sorbents for targeted gas separation applications. However, these methods rely on single gas adsorption isotherms without accounting for the dynamic gas mixtures encountered in real-life applications. …

Design And Synthesis Of Novel Octacarboxy Porphyrinic Metal–Organic Frameworks, Jacob A. Johnson

Department of Chemistry: Dissertations, Theses, and Student Research

Metal-Organic Frameworks (MOFs) are a class of nanoporous crystalline materials constructed via the interconnection between metal-ions/inorganic clusters and organic ligands. Since the surface area, pore size and distribution, and chemical functionalities of MOFs are highly tunable via the judicious combinations of inorganic clusters and organic ligands, MOFs have attracted intensive interests for a variety of applications including gas adsorption and separation, catalysis, chemical sensing, and drug delivery among others. Porphyrin based ligands are of particular interest for building functional MOFs due to their unique photo-, electro-, and catalytic properties. In addition, the four-fold symmetry of porphyrin ligands offers an effective …

Design And Synthesis Of Dynamic Covalent Polymer Scaffolds With Controlled Architectures, Emily Annette Hoff

Dissertations

The design and synthesis of functional, controlled polymer architectures is essential to the development of new materials with precise and tailorable properties or applications. The work described in this dissertation focuses on the development of controlled polymer architectures with dynamic linkages for the design of multifunctional materials and surfaces via robust, efficient, and stimuli-responsive strategies.

In Chapter III, a post-polymerization modification strategy based on ambient temperature nucleophilic chemical deblocking of polymer scaffolds bearing N-heterocycle blocked isocyanate moieties is reported. Room temperature RAFT polymerization of three azole-N-carboxamide methacrylates, including 3,5-dimethyl pyrazole, imidazole, and 1,2,4-triazole derivatives, afforded reactive polymer scaffolds …

Photodynamic Killing Of Human Cancer Cells With Smart Photosensitizer Materials And An Endoscopic Implement For Singlet Oxygen Delivery, Mihaela N. Minnis

Dissertations, Theses, and Capstone Projects

The thesis describes progress on probe tips for a microoptic device for the precise delivery of the components necessary for photodynamic therapy (PDT) in a highly localized and controllable fashion. The thesis also summarizes results of a photosensitized oxidation study. The work focused on i) developing a photoactive fluoropolymer surface that will release sensitizer drug molecule for use in PDT, ii) designing new probe tips surfaces for use as sensitizer support for a microoptic PDT device, iii) exploring strategies for covalent attachment of sensitizers and model compounds to Teflon/PVA surfaces with the aim of being coupled with our microoptic device, …

A Comparison Of Solvent And Water-Borne Alkyd Coatings And The History Of Voc Regulations In The United States, Molly Elise Burns

Master's Theses

A Comparison of Solvent and Water-Borne Alkyd Coatings Abstract

Conventional solvent based alkyd coatings have gone out of favor due to concerns over volatile organic compound (VOC) content. However, due to recent focus on renewable raw materials, alkyds are making a comeback in waterborne form. Water based alkyd coatings are known to have poor shelf stability and corrosion resistance, as well as other problems during the formulation process. This project focused on comparing solvent borne to two types of water-borne alkyds, water reducible alkyds and alkyds emulsions. The purpose was to understand the differences between the three types of alkyds …

Discrimination Of Chiral Copper(Ii) Complexes Upon Binding Of Galactonoamidine Ligands, Susanne Striegler, Jessica Pickens

Chemistry & Biochemistry Faculty Publications and Presentations

The coordination between N-p-methylbenzyl-D-galactonoamidine, a putative transition state analogue of the hydrolyis of glycosidic bonds, and symmetric and chiral binuclear copper(II) complexes was characterized by spectroscopic titration, isothermal titration calorimetry, circular dichroism spectroscopy, and DFT calculations to elucidate the binding sites in the carbohydrate upon coordination to selected metal complexes. For the formation of metal complex-glyconoamidine assemblies, contributions of the amidine site and of the hydroxyl group at C-2 in the glycon of the amidine are noted. The chiral complexes S- and R-Cu2bpdbo are discriminated by a third binding site in the carbohydrate that leads to higher stability of complexes …

Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou

STAR Program Research Presentations

Metal organic frameworks are synthetic porous materials with great capacity for adsorption of carbon dioxide and methane. They chemically appear as a chain-link fence with nodes of metal connected by organic linkers. The pores between the nodes define the characteristics of the material, allowing gas particles of specific size to pass through while blocking larger particulates. While there has been success in synthesizing small amounts of metal organic frameworks, the mechanistic details behind their assembly remain unknown. Understanding the synthesis mechanism is necessary to understand the kinetics involved and be able to produce this useful material on an industrial scale. …

Correlation Of Polymer Performance And Hansen Solubility Parameters, Daniel Jobse Mania

Master's Theses

Ready-to-use (RTU) grout is becoming more important to the finish and remodeling construction industry. Market research shows it is a fast-growing product that not only is creating its own space, but is beginning to supplant existing technology.

The original intent of this research was to investigate formulation parameters and how they affect grout performance. It was learned that particle size and oil absorption (OA) value are important filler properties that affect performance as much as adequate packing density and optimal pigment volume concentration (PVC) without going beyond critical PVC (CPVC).

Polymer architecture was also determined to be extremely important, but …

Mida Boronates Are Hydrolysed Fast And Slow By Two Different Mechanisms, Jorge A. Gonzalez, O. Maduka Ogba, Gregory F. Morehouse, Nicholas Rosson, Kendall N. Houk, Andrew G. Leach, Paul H.-Y. Cheong, Martin D. Burke, Guy C. Lloyd-Jones

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

MIDA boronates (N-methylimidodiacetic boronic acid esters) serve as an increasingly general platform for building-block-based small molecule construction, largely due to the dramatic and general rate differences with which they are hydrolysed under various basic conditions. Yet the mechanistic underpinnings of these rate differences have remained unclear, hindering efforts to address current limitations of this chemistry. Here we show that there are two distinct mechanisms for this hydrolysis: one is base-mediated and the other neutral. The former can proceed more than three orders of magnitude faster, and involves rate-limiting attack at a MIDA carbonyl carbon by hydroxide. The alternative ‘neutral’ hydrolysis …

Curing Of Polymer Thermosets Via Click Reactions, Mark Richard Brei

Dissertations

In the first project, an azide functional resin and tetra propargyl aromatic diamines were fabricated for use as a composite matrix. These systems take already established epoxy/amine matrices and functionalize them with click moieties. This allows lower temperatures to be used in the production of a thermoset part. These new systems yield many better mechanical properties than their epoxy/amine derivatives, but their T_gs are low in comparison.

The second project investigates the characterization of a linear system based off of the above azide functional resin and a difunctional alkyne. Through selectively choosing catalyst the linear system can show …

Synthesis And Characterization Of "Click Inspired" Thiol-Ene-Fullerene Nanocomposites, Amber Danielle Windham

Dissertations

This work explores the covalent incorporation of C₆₀ and Sc₃N@C₈₀ fullerenes into thiol-ene networks by a facile, one-pot photochemical reaction with multifunctional thiol and alkene monomers. Synthesis of disulfide bonds within the tri-functional thiol monomer served to photochemically initiate the reaction when cleaved. This was followed by thermal curing of the pre-polymer for preparation of fullerene-containing thiol-ene films. Films were characterized by standard techniques including infrared spectroscopy, gel percent, and thermogravimetric analysis. The role of C₆₀ and Sc₃N@C₈₀ as suitable alkenes for free-radical reaction with multifunctional thiols was investigated by preparing a …

To Bend Or Not To Bend – Are Heteroatom Interactions Within Conjugated Molecules Effective In Dictating Conformation And Planarity?, Gary Conboy, Howard J. Spencer, Enrico Angioni, Alexander L. Kanibolotsky, Neil J. Findlay, Simon J. Coles, Claire Wilson, Mateusz B. Pitak, Chad Risko, Veaceslav Coropceanu, Jean-Luc Brédas, Peter J. Skabara

Chemistry Faculty Publications

We consider the roles of heteroatoms (mainly nitrogen, the halogens and the chalcogens) in dictating the conformation of linear conjugated molecules and polymers through non-covalent intramolecular interactions. Whilst hydrogen bonding is a competitive and sometimes more influential interaction, we provide unambiguous evidence that heteroatoms are able to determine the conformation of such materials with reasonable predictability.

Synthesis And Characterization Of Organic-Inorganic Hybrid Materials For Thermoelectric Devices, Paige M. Huzyak

Masters Theses & Specialist Projects

The development of organic-inorganic hybrid materials is of great interest in thermoelectrics for its potential to combine the desirable characteristics of both classes of materials. Thermoelectric materials must combine low thermal conductivity with high electrical conductivity, but in most materials, thermal and electrical conductivity are closely related and positively correlated. By combining the low thermal conductivity, flexibility, facile processing, and low cost of organic components with the high electrical conductivity and stability of inorganic components, materials with beneficial thermoelectric properties may be realized.

Here, we describe the synthesis and characterization of anthracene-containing organic-inorganic hybrid materials for thermoelectric purposes. Specifically, POSS-ANT …

Application Of Electrospray Ionization Mass Spectrometry For Ionic Liquids And Their Biodegradation Products, Sepideh Rahbarirad

Masters Theses

Ionic liquids (ILs) are organic salts with unique physico-chemical properties and are used as green alternatives to volatile organic solvents. ESI-MS is a sensitive technique to detect these stable, permanent ions. My research focused on (1) Identification of biodegradation products of ionic liquids and (2) Multiplexed tandem MS by modulation of ionization efficiency.

Studies, have demonstrated that ILs are toxic to the environment, which makes their biodegradability an important consideration. In this work, metabolites generated during the biodegradation of 1-butyl-3-methylimidazolium chloride (BMIM), a degradation resistant and commonly used ionic liquid, are identified using high performance liquid chromatography-mass spectrometry (LC-MS).

Multiplexed …

Ultrafast Spectroscopy And Energy Transfer In An Organic/Inorganic Composite Of Zinc Oxide And Graphite Oxide, Jeff A. Secor

Dissertations, Theses, and Capstone Projects

The energy transfers and nature of defect levels of an organic/inorganic composite of Zinc Oxide and Graphite are studied with multidimensional spectroscopy. The edge and surface states of each composite are uncovered using excitation emission experiments showing which defect states are mediating the energy transfer from the metal oxide to the graphite oxide. Multidimensional time resolved spectroscopy further describes the effect of the carbon phase on the energy transfer pathways in the material.

Organometallic Materials: Ferroceno[C]Thiophenes And 1,2-Bisthienylmetallocenes, Surya R. Banks

Theses and Dissertations--Chemistry

Development of synthetic routes toward two general organometallic frameworks was undertaken. The first project involved synthetic attempts of substituted and unsubstituted ferroceno[c]thiophene while the second one was the synthesis of 1,2-dithienylmetallocenes. The long-term goal of this work is to lay the foundations for study of electronic, electrochromic, redox, and optical properties of thiophene-based materials integrated with organometallic systems such as ferrocene, ruthenocene and cymantrene. The synthetic pathway for the target molecule in the first project involved converting 1,2-bis(hydroxymethyl)ferrocene to 1,2-bis(thiouroniummethyl)ferrocene with thiourea under acidic conditions. Refluxing the salt in base followed by acidification resulted in 1,2-bis(mercaptomethyl)ferrocene, which is …