Materials Chemistry Commons^™

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Functionalized Gold Nanoparticles For Sensing Of Pesticides: A Review, Wei-Bin Tseng, Ming-Mu Hsieh, Che-Hsie Chen, Tai-Chia Chiu, Wei-Lung Tseng

Journal of Food and Drug Analysis

Pesticides are a family of non-biodegradable chemical compounds which widely used in agriculture to control pests and increase yield production. However, overuse or abuse of pesticides and their metabolites may cause potential toxicity for the environment as well as human health and all other living organisms, even at deficient concentrations. Consequently, the development of sensors for monitoring these compounds is significant. Recently, nanoparticles-based sensors have been extensively employed as a potential alternative or complementary analytical tool to conventional detection methods for pesticides. Among them, gold nanoparticles (AuNPs) owing to their unique optical properties have been developed as smart sensors with …

Synthesis Of Polyaniline Modified With Palm Oil Based Alkyd As Counter Electrode In Solar Cell Application, Ramli Mariam Fadzlina

Student Works (2020-2029)

Presently, shortage of sustainable and environmental friendly energy resources has become an important global concern. Dye-sensitized solar cell (DSSC) has widely been used as a clean energy conversion device that can solve this problem. Platinum (Pt) has commonly been used as counter electrode (CE) in DSSC due to its good redox property. However, Pt is expensive and could be easily corroded in tri-iodide solution. Recently, polyaniline (PAni) has shown promising performance in DSSC, but PAni exhibit poor adhesion on fluorine-doped tin oxide (FTO) substrate. In this study, an environmental friendly CE was developed by modifying PAni using titanium dioxide (TiO2) …

Synthesis Of Polyurethane Incorporated By Calcium Oxide And Magnesium Oxide For Heavy Metal Removal From Water, Fard Mohsen Vafaei

Student Works (2020-2029)

Water contaminated by heavy metals such as copper, lead, nickel, and cadmium has significant adverse impacts on receiving water. In recent years, various methods, such as adsorption, chemical precipitation, and ion exchange, have been extensively studied for the elimination of heavy metals. Adsorption is one of the numerously and diversely reported mechanisms of removing heavy metals due to its simplicity and costeffectiveness. In this study, highly permeable rigid polyurethanes (PU) incorporating calcium oxide (CaO) (PU/CaO) composite materials were prepared via a facile and economic one-pot synthesis method and characterized for remediation of heavy metal from water. To investigate the effect …

Effect Of Post-Consumer Content And Bioplastic Incorporation On Polymeric Resin In Consumer Applications, Shelby Bicknell

Electronic Theses & Dissertations

Controversy surrounds the use of plastic products, primarily due to their potentially negative impact on the environment at the end of their lifecycle. The most widely used plastics are manufactured from petrochemicals such as petroleum, coal or natural gas. Petrochemical plastics are not able to readily breakdown in the environment, which aggravates the existing pollution problems. Fortunately, there are eco-friendly alternatives to petrochemical-based plastics. Bioplastics may be derived from renewable sources, biodegradable, or both. Bio-based plastics are plastics that may be derived from renewable biomass sources including, but not limited to, vegetable oils, cornstarch, straw, woodchips, and food waste. They …

Interfaces In Lead-Free Tin Perovskite Photovoltaics: An Investigation Of Energetics, Ion Mobility, Surface Modification, And Performance, Alex Boehm

Theses and Dissertations--Chemistry

Halide perovskites have generated tremendous interest as low-cost semiconductors for optoelectronics, such as photovoltaics, lasers, and light emitting diodes due to their extraordinary optical and transport properties. Perovskite photovoltaics in particular have demonstrated a meteoric rise in power conversion efficiencies and drawn considerable interest as a next-generation solar energy technology. The rapid development has centered around lead-based derivatives, and concerns regarding the toxicity of lead has sparked interest in low toxicity and more environmentally friendly perovskite derivatives. In this regime tin (Sn) is regarded as a prominent alternative owing to the ideal bandgap and reduced toxicity exhibited by Sn-halide perovskites. …

An In-Situ Study Of The Aqueous Speciation Of Uranium (Vi) Under Hydrothermal Conditions, Diwash Dhakal

Graduate Theses/Dissertations

Rigorous study of the speciation distribution of uranyl-chloride bearing solutions under hydrothermal conditions is important to understand the transport mechanism of uranium underground, which is of uttermost interest to parties studying the geological uranium deposits and those studying the possibilities of geological repositories for spent nuclear waste. I report an in-situ Raman spectroscopic study of the speciation distribution of aqueous uranyl-chloride complexes upto 500°C conducted using a HDAC as the high PT spectroscopic cell. The samples studied contained the species UO₂²⁺, UO₂Cl⁺, UO₂Cl₂⁰ and UO₂Cl₃^{- …}

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Photocatalytic Activity: Experimental Features To Report In Heterogeneous Photocatalysis, Md. Ariful Hoque, Marcelo I. Guzman

Chemistry Faculty Publications

Heterogeneous photocatalysis is a prominent area of research with major applications in solar energy conversion, air pollution mitigation, and removal of contaminants from water. A large number of scientific papers related to the photocatalysis field and its environmental applications are published in different journals specializing in materials and nanomaterials. However, many problems exist in the conception of papers by authors unfamiliar with standard characterization methods of photocatalysts as well as with the procedures needed to determine photocatalytic activities based on the determination of “apparent quantum efficiencies” within a wavelength interval or “apparent quantum yields” in the case of using monochromatic …

Nmr Characterizations Of Candidate Battery Electrolytes, Stephen A. Munoz

Dissertations, Theses, and Capstone Projects

Enormous strides have been made in next-generation power sources to build a more sustainable society. Energy storage has become a limiting factor in our progress, and there are huge environmental and financial incentives to find the next step forward in battery technology. This work discusses NMR methods for characterizing materials for use in battery application, with a special focus on relaxometry and diffusometry. Examples are provided of various recent investigations involving novel candidate electrolyte materials with different collaborators. Works discussed in this thesis include: the characterization of a new disruptive solid polymer electrolyte technology, investigations of the dynamics of super …

Lithium And The Foreseeable Future, Paolo Vargas

Mechanical Engineering Undergraduate Honors Theses

This paper aims to clarify the uncertainties regarding worldwide lithium resource availability in the years to come. Previous studies made on the subject are presented with some ambiguity and this work intends to fill the gaps. The information and data presented throughout this script with respect to global lithium resources and reserves are mostly based on data released by the United States Geological Survey (USGS). Lithium resource availability in the future is a point of paramount significance primarily for the automotive, portable electronics, and the power generation industry. Since, a change of supply would ultimately affect the price of lithium, …

Photoelectrochemical Studies On Non-Noble Metal Based Catalysts Towards Tandem Solar Water Splitting, Arun Siddarth Sridhar

Dissertations

Photoelectrochemical (PEC) water splitting makes direct use of solar energy incident on semiconductor photoelectrodes, and it is a convenient, economic option to produce high purity hydrogen at low temperatures. The use of multiple light absorbers can increase overall solar energy utilization and provide a solution to the trade-off between overall band gap and band edge positioning of photoelectrodes specific to solar water oxidation and water reduction. The study of non-noble metal based catalysts for hydrogen evolution reaction (HER) and oxygen evolution reactions (OER) are essential for economic practical commercialization of photo-electrolyzers. This dissertation focuses on the use of a variety …

Surfactant Driven Assembly Of Freeze-Casted, Polymer-Derived Ceramic Nanoparticles On Grapehene Oxide Sheets For Lithium-Ion Battery Anodes, Ali Zein Khater

Honors Undergraduate Theses

Traditional Lithium-Ion Batteries (LIBs) are a reliable and cost-efficient choice for energy storage. LIBs offer high energy density and low self-discharge. Recent developments in electric-based technologies push for replacing historically used Lead-Acid batteries with LIBs. However, LIBs do not yet meet the demands of modern technology. Silicon and graphene oxide (GO) have been identified as promising replacements to improve anode materials. Graphene oxide has a unique sheet-like structure that provides a mechanically stable, light weight material for LIB anodes. Due to its structure, reduced graphene oxide (rGO) is efficiently conductive and resistive to environmental changes. On the other hand, silicon-based …

Development Of Photocatalysts Supported On Graphitic Carbon Nitride For The Degradation Of Organic Water Pollutants, Atanu Giri

Theses and Dissertations

Graphitic carbon nitride (g-C₃N₄) heterojunction composites with the semiconducting metal oxides, CeO₂, ZnO and TiO₂ are prepared in situ by co-calcination of the precursor materials or by a solvothermal method. The structural, morphological and the optical properties of the prepared materials are studied using various microscopy and spectroscopy techniques. The synthesized composite materials, CeO₂/g-C₃N₄, ZnO/g-C₃N₄ and TiO₂/g-C₃N₄ are more efficient in the photocatalytic degradation of the water pollutants indigo carmine (IC) and atrazine than the pure metal oxide, g-C …

Design Of 3d Macroporous Inverse Opal Tio2 Binary And Ternary Composites Sensitized With Gold Nanoparticles And Cds Quantum Dots For Photocatalysis, Daniel A. Corella

Master of Science in Chemical Sciences Theses

Materials composed of titanium (IV) oxide (TiO₂) have received enormous scientific interest due to titania’s abundance, non-toxicity, and photocatalytic proficiency, however its large band gap limits its applicability under ambient conditions. Various attempts have been made to incorporate titania into composite systems to sensitize it for activity under a broader range of wavelengths. One such method includes utilizing narrow band gap semiconductors to form an electron transfer process analogous to photosynthesis referred to as a Z-scheme. Z-scheme systems can catalyze the decomposition of aqueous pollutants via generation of reactive oxygen species after input of sunlight. This work reports …

Heterogeneous Base Metal Catalyzed Oxidative Depolymerization Of Lignin And Lignin Model Compounds, John Adam Jennings

Theses and Dissertations--Chemistry

With the dwindling availability of petroleum, focus has shifted to renewable energy sources such as lignocellulosic biomass. Lignocellulosic biomass is composed of three main constituents, lignin, cellulose and hemicellulose. Due to the low value of cellulosic ethanol, utilization of the lignin component is necessary for the realization of an economically sustainable biorefinery model. Once depolymerized, lignin has the potential to replace petroleum-derived molecules used as bulk and specialty aromatic chemicals. Numerous lignin depolymerization strategies focus on cleavage of β-aryl ether linkages, usually at high temperatures and under reductive conditions.

Alternatively, selective benzylic oxidation strategies have recently been explored for …

Ultrafast Spectroscopy And Energy Transfer In An Organic/Inorganic Composite Of Zinc Oxide And Graphite Oxide, Jeff A. Secor

Dissertations, Theses, and Capstone Projects

The energy transfers and nature of defect levels of an organic/inorganic composite of Zinc Oxide and Graphite are studied with multidimensional spectroscopy. The edge and surface states of each composite are uncovered using excitation emission experiments showing which defect states are mediating the energy transfer from the metal oxide to the graphite oxide. Multidimensional time resolved spectroscopy further describes the effect of the carbon phase on the energy transfer pathways in the material.

Systematic Postsynthetic Modification Of Nanoporous Organic Frameworks And Their Performance Evaluation For Selective Co2 Capture, Timur Islamoglu

Theses and Dissertations

Porous organic polymers (POPs) with high physicochemical stability have attracted significant attention from the scientific community as promising platforms for small gas separation adsorbents. Although POPs have amorphous morphology in general, with the help of organic chemistry toolbox, ultrahigh surface area materials can be synthesized. In particular, nitrogen-rich POPs have been studied intensively due to their enhanced framework-CO₂ interactions. Postsynthetic modification (PSM) of POPs has been instrumental for incorporating different functional groups into the pores of POPs which would increase the CO₂ capture properties. We have shown that functionalizing the surface of POPs with nitro and amine groups …

Addressing Public Health Risks Of Persistent Pollutants Through Nutritional Modulation And Biomimetic Nanocomposite Remediation Platforms, Bradley J. Newsome

Theses and Dissertations--Chemistry

Due to their relative chemical stability and ubiquity in the environment, chlorinated organic contaminants such as polychlorinated biphenyls (PCBs) pose significant health risks and enduring remediation challenges. Engineered nanoparticles (NPs) provide a novel platform for sensing/remediation of these toxicants, in addition to the growing use of NPs in many industrial and biomedical applications, but there remains concern for their potential long-term health effects. Research highlighted herein also represents a transdisciplinary approach to address human health challenges associated with exposure to PCBs and NPs. The objectives of this dissertation research are two-fold, 1) to develop effective methods for capture/sensing and remediation …

A Review On The Visible Light Active Titanium Dioxide Photocatalysts For Environmental Applications, Miguel Pelaez, Nicholas Nolan, Suresh Pillai, Michael Seery, Polycarpos Falaras, Athanassios G. Kontos, Patrick S.M. Dunlop, Jeremy W.J. Hamiltone, J. Anthony Byrne, Kevin O’Shea, Mohammad H. Entezari, Dionysios D. Dionysiou

Articles

Development of visible light active (VLA) titania photocatalysts

Fujishima and Honda (1972) demonstrated the potential of titanium dioxide (TiO 2) semiconductor mate-rials to split water into hydrogen and oxygen in a photo-electrochemical cell. Their work triggered the development of semiconductor photocatalysis for a wide range of environmental and energy applica-tions. One of the most significant scientific and commercial advances to date has been the development of visible light active (VLA) TiO2 photocatalytic materials. In this review, a background on TiO2 struc-ture, properties and electronic properties in photocatalysis is presented. The development of different strategies to modify TiO2 for the utilization …

Synthesis Of An Antimicrobial Textile Coating, William M. Morris

Chemistry and Biochemistry

A titania nanosol was synthesized and coated onto nylon/cotton blended textile substrates. The substrates were characterized via SEM for adhesion and nanoparticle formation, then subjected to antimicrobial efficacy tests. The titania nanosol was successfully coated on to textiles samples. Particles were observed to be around 2 by 3 micrometers and formed between the interstitial space of textile fibers. Although larger than typical nanoparticles, the coatings exhibited what seemed to be antimicrobial activity. Titania nanosol coated textile samples were subjected to Kirby Bauer Assay in the presence of S. aureus. The coated textile sample exhibited an inhibition of growth around its …

Computational Study Of Passive Neutron Albedo Reactivity (Pnar) Measurement With Fission Chambers, Sandra De La Cruz

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Passive Neutron Albedo Reactivity technique (PNAR) was used to assay used nuclear fuel as a potential method for the measurement of fissionable material in fuel assemblies. A Monte Carlo transport code (MCNPX 2.6) was used to develop simulation models to evaluate the PNAR technique. The MCNPX simulated models consisted of two 17x17 Pressurized Water Reactor (PWR) used fuel assemblies; one with an initial 3 wt% uranium-235*, cooled for 20 years and second with an initial 4 wt% uranium-235*, cooled for 5 years. Each used fuel assembly was simulated at four different burn up rates of 15, 30, 45, and …

A Practical Photoelectrochemical Cell Using Nonprecious Metal Electrodes, Patrick Enright, Tony Betts, John Cassidy

Articles

Abstract: Photoelectrochemical cells (PECs) can be used to harvest light from the oxidation of dissolved organic matter. Similar to fuel cells but requiring light to operate, PECs contain a light assisted electrode that oxidises electron rich materials (anode); these electrons then flow to a typically Pt cathode where O₂ is normally the electron acceptor. In this work a PEC cell containing inexpensive materials was shown to (a) mineralise typical organic compounds present in waste water and (b) produce electricity from their decomposition. The PEC cell consisted of a TiO₂ coated conducting ink anode exposed to a light source, …

Working Report On The Status Quo Of Nanomaterials Impact On Health And Environment, Harald Krug, Margarita Apostolova, Marite Arija Bake, Gordon Chambers, Horia Chiriac, Eva Herzog, Victoria Hand, Jürgen Höck, Peter Hoet, Nicoleta Lupu, Declan Mccormack, Maja Remskar, George Robillard, Jamila Smisterova, Jan Stetkiewicz, Speranta Tanasescu, Aris Tsatsakis, David Vaughn, Peter Wick, Jörg Wörle-Knirsch

Articles

Nanotechnology is regarded as one of the key technologies of the future and associated with high expectations by politics, science and economy. Artificially produced nanosized particles and nanoscale system components have new properties which are of importance for the development of new products and applications. Such new properties of materials and substances result from the special properties of surfaces and interfaces and in part, from the geometric shape of the material. In theory nanoparticles (NPs) can be produced from nearly any chemical; however, most NPs that are currently in use today have been made from transition metals, silicon, carbon (single-walled …

Ua66/1/5 Icset - Institute For Combustion Science & Environmental Technology, Wku Ogden College Of Science & Engineering

WKU Administration Documents

History and overview of the work of the WKU Institute for Combustion Science & Environmental Technology through 2008.

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

There is an active international interest in lead-bismuth eutectic and similar liquid lead systems because of the relevance to the transmutation of nuclear waste, fast reactors, and spallation neutron sources.

Materials in these systems must be able to tolerate high neutron fluxes, high temperatures, and chemical corrosion. For lead bismuth eutectic (LBE) systems, there is an additional challenge because the corrosive behaviors of materials in LBE are not well understood. Most of the available information on LBE systems has come from the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. The Russians found …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The primary objective of this task was to evaluate the effects of environmental and mechanical parameters on environment induced degradations of candidate target structural materials for applications in spallation-neutron-target systems. The materials selected for evaluation and characterization were martensitic stainless steels including Alloys HT-9, EP-823, and 422.

Accelerator-driven transmutation systems involve bombarding a target material such as molten lead-bismuth-eutectic (LBE) by a proton beam, thereby producing neutrons. The molten LBE target will be contained in a subsystem structural container made of a suitable material such as Alloys HT-9, EP-823, and 422. During the transmutation process, the target structural material may …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The corrosion of structural materials is a major concern for the use of lead-bismuth eutectic (LBE) systems for nuclear applications such as in transmuter targets or fast reactors. Corrosion in liquid metal systems can occur through various processes, including, for example, dissolution, formation of inter-metallic compounds at the interface, and penetration of liquid metal along grain boundaries. Predicting the rate of these processes depends on numerous system operational factors: temperature, system geometry, thermal gradients, solid and liquid compositions, and velocity of the liquid metal, to name a few. Corrosion, along with mechanical and/or hydraulic factors, often contributes to component failure. …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Trp Final Report 09/01/2003-08/31/2004, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 06/01/2004-08/31/2004, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …