Materials Chemistry Commons^™

Synthesis And Characterization Of Carbon Quantum Dots And Gold Nanoparticles For Norovirus Biosensing Applications In Water Systems, Breanne Evans

Master's Theses

Rapid, reliable detection of viral pathogens remains a significant challenge across water-treatment and environmental monitoring systems, including drinking-water, wastewater, water reuse, and environmental surveillance applications. Waterborne viral contamination can pose substantial public-health risks, making early detection essential for protecting water quality and responding quickly to treatment failures or contamination events. Direct potable reuse (DPR) is one particularly demanding example because it requires continuous verification of treatment performance and the broader need for rapid virus monitoring extends across many water-treatment and environmental surveillance applications. Norovirus is a priority target because of its widespread occurrence in wastewater, environmental persistence, and exceptionally low …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …

Synthesis And Characterization Of Eco-Engineered Hollow Fe2o3/Carbon Nanocomposite Spheres: Evaluating Structural, Optical, Antibacterial, And Lead Adsorption Properties, Islam Gomaa

Nanotechnology Research Centre

This work presents a facile mechano-thermal route for the synthesis of carbon-decorated, hollow, mesoporous α-Fe2O3 microspheres. Comprehensive characterization (XRD, XPS, FT-IR, SEM/EDX, TGA, zeta-potential) confirmed the formation of phase-pure hematite with nanoscale crystallites (~19 nm), substantial residual surface carbon (~40 wt%) consistent with Fe–O–C linkages, and a positive surface charge (+15.9 mV). The hierarchical hollow/mesoporous architecture enables fast ion transport and provides extensive interior binding sites, resulting in rapid Pb(II) uptake that reaches 92% removal in ≈15 min at pH 5.0. The adsorption follows a Langmuir isotherm (qmax ≈ 70.6 mg/g) and pseudo-second-order kinetics, indicative of chemisorption coupled to efficient …

Synthesis And Characterization Of A Biobased Polymer From Tung Oil And Pine Rosin & Characterization Of Polyhydroxybutyrate., Arijanet P. Osumah

College of Graduate Studies: Theses & Dissertations

This thesis presents two independents but thematically aligned research projects focused on the development and evaluation of sustainable polymers. The first involves the synthesis and characterization of a biobased polymer derived from tung oil and pine rosin. Tung oil, which is a triglyceride was chemically modified to produce tung oil diglyceride (TDG), which subsequently reacted with abietic acid-rich pine rosin to yield tung oil abietate (TOA), a biobased monomer. The TOA monomer was polymerized with butyl methacrylate (BMA) and divinylbenzene (DVB) using di-tert-butyl peroxide (DTBP) as a thermal initiator. The resulting polymer was thoroughly characterized using Fourier transform infrared spectroscopy …

Developing A Method To Identify Tyre Particles By Detecting Benzothiazole Via Gc-Ms, Emma Paull

The Plymouth Student Scientist

Tyre particles are a dominant source of microplastic pollution in our environment. However, their chemical and physical properties are poorly understood and no standardised methods for identifying and quantifying them exist. This study looked to develop a method to identify tyre particles using two tyre samples of differing particle sizes, fine (62 - 125 µm) and coarse (250 – 500 µm). Both samples underwent ultrasound-assisted extraction before being analysed via gas chromatography-mass spectrometry (GC-MS) in both full scan and SIM mode, using benzothiazole as a marker. Both samples were also analysed via particle size analysis, scanning electron microscopy (SEM) and …

Conversion Of Microcrystalline Cellulose To Hexane Using Hydrogenated Metal Oxides At Low Temperature And Pressure, Mubarak Osman

Electronic Theses and Dissertations

Increasing global energy demand and environmental concerns have fueled the exploration of sustainable and efficient methods for renewable fuel production. The conversion of cellulosic waste to hydrocarbon fuels using hydrogenated metal oxides presents a novel and eco-friendly approach to sustainably address energy demand. In this study, hydrogenated metal oxides were used as catalysts in a relatively low-temperature and atmospheric-pressure environment to facilitate the conversion of cellulosic waste into hydrocarbon fuels. Hydrogenated metal oxides have been introduced as potential hydrogen transfer catalysts. The expected result is the selective conversion of cellulose to hexane at relatively low temperatures, which significantly reduces energy …

Thin-Film Nanocomposite Membranes With Alumina Nanoparticles For Textile Wastewater Treatment Applications, Amr Mohamed Tayel

Theses and Dissertations

Thin-film nanocomposite (TFN) membranes are gaining great interest in industrial wastewater treatment due to their superior performance, especially for higher water flux and pollutants’ rejection, as well as improved chemical, thermal and mechanical stabilities, compared to other types of membranes. The performance of TFN membranes can be enhanced using different types of nanofillers, among which ceramic nanomaterials, such as Al2O3, offer a promising potential for applications involving treatment of industrial wastewater such as textile effluents, and this is due to their stability, hydrophilicity, and relative low cost. The study of the TFN membrane properties and structure allows the optimization and …

The Surface Chemistry And Binding Interactions Of Lignin With Polymer-Encapsulated Gold Nanoparticles Acting As Model Microplastics, Oluwaseun Ayodeji Akinsola

All Master's Theses

This study investigates the surface chemistry and molecular-level interactions between lignin, a special type of natural organic matter, and polymer-capped gold nanoparticles, shedding light on the strength of adsorption between lignin and nanoscale polymer surfaces. Specifically, the study presents a variety of nanoscale polymer surfaces displaying different charged functional groups, using layer-by-layer assembly of three polyelectrolytes (polyallylamine hydrochloride (PAH)), polyacrylic acid (PAA), and poly(diallyldimethylammonium chloride (PDADMAC)) on 90 nm citrate-stabilized gold nanoparticles (AuNPs). This approach provides a library of polymer-encapsulated AuNPs for investigating the binding interactions of lignin to nanoscale polymers via spectroscopic techniques. ζ-potential, dynamic light scattering (DLS), …

Mechanisms Of Dendritic Shorting In Lithium Metal Batteries With Li7la3zr2o12 Solid Electrolytes, Lukas Karapin-Springorum

Pomona Senior Theses

Energy storage will play a crucial role in efforts to mitigate the effects of climate change caused by greenhouse gas emissions from human activity. Lithium metal batteries using solid electrolytes like Li₇La₃Zr₂O₁₂ have higher energy density than lithium-ion batteries, which may enable a more rapid and complete electrification of transportation. However, lithium metal batteries suffer from undesirable short-circuiting when metallic lithium deposits connect the two electrodes. It has been debated whether these lithium dendrites generally grow directionally from the anode or are generated by the reduction of lithium ions inside the solid electrolyte, …

Synthesis, Functionalization, And Application Of Polymeric Membrane Blends Of Polysulfone, Poly-Ether Ether-Ketone, And Natural Fiber Additive Biochar For Optimal Water Treatment., Abelline Katusiime Fionah

Theses and Dissertations--Chemistry

According to the Center for disease control (CDC), an estimated 1.7 to 2.2 million persons die from waterborne diseases annually. The majority of individuals dying from diseases resulting from unsafe drinking water, such as diarrhea and gastroenteritis, are children. This has in turn created a global water crisis. Different methods have been developed to treat contaminated water in response to the global water crisis such as adsorption, filtration, ozonolysis, catalysis, etc. Of the methods available, filtration via polymeric membranes has been one of the most successfully applied. A membrane is a thin semi-permeable barrier (often made of a polymer) used …

Optimization Of Transition-Metal Inclusive Carbon Aerogels For Electrochemical Energy Applications, Allen Dalton Davis

Electronic Theses & Dissertations

The ever-growing need for energy alongside rising concerns for climate change demands the development of renewable energy technologies. Hydrogen fuel cells are a promising technology that can serve to either supplement energy generation or act as a lone power source. Yet for these devices to be truly green, the hydrogen that serves as fuel must be procured from a renewable resource. Electrolytic water splitting is a process that allows for the dissociation of water into H₂ and O₂. For this process to be practical, the electrolyzer needs to demonstrate high efficiency and stability, as well as a …

Integrating Sensor Development, Risk Assessment, And Community Engagement To Support Environmental Justice In The Rural Community Of El Tiple, Colombia, David Bahamon Pinzon

All Dissertations

In Colombia, ethnic communities have traditionally been responsible stewards of natural resources. They recognize the importance of these resources for their livelihood, as well as their ancestral and cultural heritage. El Tiple, a rural Afro-Colombian community, has been affected by the incursion of private corporations that promoted the expansion of sugarcane monocrops in their territory. Since the introduction of the monoculture industry, local freshwater sources have been depleted due to intensive water use for irrigation of the sugarcane crops. Additionally, the intensive usage of agrochemicals has been linked with loss of native flora, damages to family farms, and pollution of …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

Detection Of Nitrogen Dioxide Via Graphene-Enhanced Raman Scattering, Spencer Hazeslip

Chemistry & Biochemistry Undergraduate Honors Theses

This paper presents the development of a nitrogen dioxide (NO₂) sensor that utilizes the phenomenon of graphene-enhanced Raman scattering (GERS). The sensor consists of monolayer graphene on a silicon wafer, functionalized noncovalently with Copper(II) 2,9,16,23-tetra-tert-butyl-29H,31H-phthalocyanine (CuTTPc) via the solution soaking method. A custom sensing chamber was constructed to enable Raman spectra to be collected during NO₂ exposure. The response of the sensor was found to be linear between 10 and 100 ppm NO₂, indicating that it could be used for both detection and quantification. Furthermore, the sensor was shown to be reusable after …

Silicon In Renewable Power Generation And Storage: Decarbonizing The Grid And Automobile Transport, Kurt W. Kolasinski

Sustainability Research & Practice Seminar Presentations

Professor Kurt Kolasinski, Chemistry - Silicon in renewable power generation and storage: Decarbonizing the grid and automobile transport.

Dual Ionic Liquid-Functionalized Cellulosic Materials: Thermal, Mechanical And Conductive Properties, Elizabeth Mcgrew, Kevin M. Miller Phd

Posters-at-the-Capitol

Cellulose, an inexpensive and renewable biomacromolecule, represents an intriguing synthetic foundation for new materials with task-specific properties. Here, we wish to report a synthetic route for functionalizing cellulose with a side chain containing two ionic liquid functional groups using azide-alkyne ‘click’ cyclization strategy, followed by quaternization of the two resulting heterocycles (1,2,3-triazole and imidazole). Through this functionalization strategy, the resulting cellulosic materials exhibited significant softening, with several glass transition (T_g) values observed below room temperature, indicating the amorphous nature of the materials, with the T_g dependent on both the length of the side chain and the …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Feasibility Studies For Use Of Copper Slag In Clinker Manufacture, Suresh Vanguri, Suresh Palla, Gonthi Prasad, Sanjeev Kumar Chaturvedi, Bibekananda Mohapatra

Makara Journal of Science

This study investigated the feasibility of using copper slag (CS-C) as a raw material in the production of Portland cement (PC). The effect of addition of 0%-3.5% CS-C on the clinkerization process, mineralogy, microstructure, and compressive strength development was studied. The Presence of CS-C in the raw mix resulted in the reduced temperature of clinkerization by about 50 °C. The quality of clinker prepared from the raw mix containing 3% CS-C and burned at 1400 °C was comparable to that of clinker prepared from the raw mix containing no CS-C and burned at 1450 °C. Gradual polymorphic modification of alite …

Structural, Charge Transport, Gas Sensing, Magnetic, Pseudocapacitive, And Electrocatalytic Properties Of Perovskite Oxides., Surendra Bahadur Karki

Electronic Theses and Dissertations

Perovskites are functional materials with the general formula ABO₃ (A = alkali, alkaline earth or lanthanoid cations and B = transition metal or main group cations). These materials are marked by a variety of crystal structures and interesting properties such as colossal magnetoresistance, ferroelectricity, multiferroicity, superconductivity, pseudocapacitance, gas sensing, charge transport, and electrocatalytic properties. The formula of perovskite can be written as AA’BB’O₆, when there is ordering between two cations over A and B-sites. Such compounds are called double perovskite oxides. Some amount of oxygen could be lost from crystal structure without decomposition of the phase. Such …

Atomistic Simulation Of Na+ And Cl- Ions Binding Mechanisms To Tobermorite 14Å As A Model For Alkali Activated Cements, Ahmed Abdelkawy

Theses and Dissertations

The production of ordinary Portland cement (OPC) is responsible for ~8% of all man-made CO2 emissions. Unfortunately, due to the continuous increase in the number of construction projects, and since virtually all projects depend on hardened cement from the hydration of OPC as the main binding material, the production of OPC is not expected to decrease. Alkali-activated cement produced from the alkaline activation of byproducts of industries, such as iron and coal industries, or processed clays represents a potential substitute for OPC. However, the interaction of the reaction products of AAC with corrosive ions from the environment, such as Cl-, …

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem

Theses and Dissertations

Designing highly active, durable, and nonprecious electrodes for overall water splitting is of urgent scientific importance to realize sustainable hydrogen production. Accordingly, the need to search efficient energy production systems is of crucial necessity. In this thesis, two various systems for sustainable hydrogen production have been reported using electrochemical and photoelectrochemical pathways. In the first part of the thesis, electrochemical water splitting involving both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been established. To this end, an innovative approach is demonstrated to synthesize flower-like 3D homogenous trimetallic Mn, Ni, Co phosphide catalysts directly on nickel foam via …

Modeling Vitexin And Isovitexin Flavones As Corrosion Inhibitors For Aluminium Metal, Abdullahi Muhammad Ayuba, Umaru Umar

Karbala International Journal of Modern Science

Theoretically, the aluminium corrosion inhibitive performance of vitexin (VTX) and isovitexin (SVT) were evaluated with a view of establishing the mechanism of the inhibition process. Calculations which include the consideration of several global descriptors were studied to describe and correlate the reactivity of the molecules with the computed descriptors. First and second-order condensed Fukui functions were employed to analyze local reactivity parameters, while simulations involving the adsorbed molecules on Al (1 1 0) surface were conducted through quench dynamic simulations and the mechanism of physical adsorption was established with SVT relatively been a better inhibitor on Al surface than VTX.

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Fullerene And Tungsten Oxide Nanostructures-Based Electrocatalysts For All-Vanadium Redox Flow Batteries, Farah Ahmed El Diwany

Theses and Dissertations

The vanadium redox flow battery (VRFB) is one of the most promising long-term energy storage solutions mainly due to its long service life and the independence of its energy capacity on power rating and vice versa. However, its relatively high capital cost limits its widespread deployment. Economic analysis reveals that a high-power density VRFB with decreased cell stack size can dramatically reduce the cost. The energy efficiency of a VRFB primarily depends on the kinetics of vanadium redox reactions that take place in the stack. Therefore, studying the effect of surface chemistry of electrodes on the kinetics of each …

Comparative Analysis Of Azo Dye Restriction In The International Textile Industry, Kayla Demark

Apparel Merchandising and Product Development Undergraduate Honors Theses

Azo dyes are the most used type of dye in the textile industry. Some of these dyes have the potential to be extremely toxic to both human health and the environment. While regulations of these dyes vary across the world, it is suggested that not enough is being done to protect consumers and the environment from potentially harmful azo dyes (Rawat et al., 2016). It is the responsibility of apparel companies to ensure that their products that contain azo dyes are safe for consumers.

The purpose of this study was to understand how azo dyes and their by-products are restricted …

006— Pretreatment And Fiber Content Analysis Of Cannabis Sativa, Dina Bu, Jessica Roggie, Sarah Schmidlin, Barnabas Gikonyo

GREAT Day Posters

Cannabis sativa commonly known as hemp is one of the fastest-growing plants whose refined products have immense commercial value. Various products include refined hemp such as: biofuels, biodegradable plastics, textiles, dietary supplements, paper, clothing, and much more. Hemp fibers are also used in construction and manufacturing applications by strengthening their composite products. Hemp is a high yielding, sustainable, and environmentally friendly crop due to its various qualities, and has the potential to yield valuable raw materials for a great number of applications. Our research evaluates the pretreatment of hemp as well as the comparative analysis of the fiber content thereof. …

041— Fiber Decomposition And Pretreatment Analysis Of Cannabis Sativa L.: Hemp, Dina Bu, Jessica Roggie, Sarah Schmidlin, Barnabas Gikonyo

GREAT Day Posters

Hemp is a subspecies of Cannabis sativa L. along with marijuana, yet the two differ in chemical constituent levels of delta-9-tetrahydrocannabinol (THC) and cannabidiol (CBD). Hemp contains 0.3% THC, compared to marijuana 17.1%, allowing it to be a safe and compelling biomass for investigation. The refined products of hemp are vast due to its fast-growing properties; therefore various commercial industries have included refined hemp in biofuels, biodegradable plastics, textiles, dietary supplements, paper, clothing, and much more. Construction and manufacturing applications have also been seen to include hemp to strengthen their composite products. The high-yielding, sustainable, and environmentally friendly qualities …