Materials Chemistry Commons^™

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Wear Of High Entropy Alloys: Understanding Effects Of Cryogenic Temperatures And Surface Nitriding On Wear Behavior, Aubrey Yu Tang

Dartmouth College Ph.D Dissertations

Cryogenic tribological applications have become increasingly important with the development and innovation of advanced equipment in aerospace, polar regions, superconductivity, and more. Traditional lubrication methods are not viable under these harsh environments, so metallic materials must be able to maintain excellent mechanical properties and withstand the constant impact and wear alone. High entropy alloys (HEAs) have emerged as potential candidates for these applications because of their wide variety of excellent room temperature properties and apparent improvement of mechanical properties of some HEAs at extremely low temperatures. Despite their promising nature, very limited work has been done on understanding the wear …

Numerical Simulation Of The Pitting Corrosion Behavior Of Stainless Steel Bellows Influenced By Varying Liquid Film Thicknesses, Lu-Jun Ren, Guo-Min Li, Zhen-Xiao Zhu, Hai-Yan Xiong, Bing Li

Journal of Electrochemistry

To advance the understanding of the corrosion behavior of stainless steel bellows in marine atmospheric environments and enhance the precision of service life predictions, this study employs finite element simulations to investigate the pitting corrosion rates and pit morphologies of bellows peaks and troughs under varying electrolyte film thicknesses. The model incorporates localized electrochemical reactions, oxygen concentration, and homogeneous solution reactions. For improved computational accuracy, the fitted polarization curve data were directly applied as nonlinear boundary conditions on the electrode surface via interpolation functions. Simulation results reveal that the peak regions exhibit faster corrosion rates than the trough regions. With …

Research Progress On Thermal Management Of Lithium-Ion Batteries, Hong-Da Li, Qiu-Wan Shen, Zhao-Yang Zhang, Xin-Yue Zhao, Yuan Wei, Shi-An Li

Journal of Electrochemistry

Nowadays, new energy technologies are developing rapidly, energy storage systems are widely used, and lithium-ion batteries occupy a dominant position among them. Therefore, it is also very important to ensure their performance, safety and service life through thermal management technology. In this paper, the causes of thermal runaway of lithium batteries are reviewed firstly, and three commonly used thermal management technologies, namely, air cooling, liquid cooling and phase change material cooling, are compared according to relevant literature in recent years. Air cooling technology has been widely studied because of its simple structure and low cost, but its temperature control effect …

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Ionic Liquid Enhanced Proton Transfer For Neutral Oxygen Evolution Reaction, Ming-Xing Chen, Nian Liu, Zi-He Dua, Jing Qi, Rui Cao

Journal of Electrochemistry

The development of highly active catalyst in pH-neutral media for oxygen evolution reaction (OER) is critical in the field of renewable energy storage and conversion. Nevertheless, the slow kinetics of proton-coupled electron transfer (PCET) hinders the overall OER efficiency. Herein, we report an ionic liquid (IL) modified CoSn(OH)₆ nanocubes (denoted as CoSn(OH)₆-IL), which could be prepared through a facile strategy. The modified IL would not change the structural characteristics of CoSn(OH)₆, but could effectively regulate the local proton activity near the active sites. The CoSn(OH)₆-IL exhibited higher intrinsic OER performances than the pristine …

Investigating The Thixotropy Of Fresh Struvite Cement-Based Composite: Insights On Mechanisms Of The Pastes’ Thixotropic Behavior, Ugochukwu Ewuzie, Abdulkareem O. Yusuf, Damilola Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite (ST) recovered during wastewater treatment has been sparsely applied in cement-based composites. This study systematically evaluated the thixotropic behavior of cement-struvite (CST) pastes, a mix of 5–20 % ST by mass of cement, and proposed the interaction mechanisms leading to the pastes' thixotropy. The hysteresis loop area was used to establish the pastes' thixotropy and investigate its relationship with increased ST content, temperature, and yield stress. In the thixotropic behavior model used, the equilibrium shear stress was employed to examine the CST pastes' irreversible change; the characteristic time of deflocculation was used to study the flocs destruction process; and …

Vacuum Consistent Electrochemistry In Ionic Liquid Combined With Oxide Epitaxy, Yuji Matsumoto

Journal of Electrochemistry

We introduce our state-of-the art of “vacuum consistent electrochemistry” to an investigation of the interfaces between oxides and ionic liquid (IL). Pulsed laser deposition (PLD) has been one of the powerful and sophisticated techniques to realize nanoscale preparation of high-quality epitaxial oxide thin films. On the other hand, electrochemistry is a simple, very sensitive, and non-destructive analysis technique for solid-liquid interfaces. To ensure the reproducibility in experiment of the interfaces of such epitaxial oxide films, as well as bulk oxide single-crystals, with IL, we employ a home-built PLD-electrochemical (EC) system with IL as an electrolyte. The system allows one to …

Pm Irras Studies Of Organized Molecular Films At A Gold Electrode Surface, Zhang-Fei Su, Ai-Cheng Chen, Jacek Lipkowski

Journal of Electrochemistry

This feature article illustrates the potential of polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) to provide molecular-level information about the structure, orientation and conformation of constituents of thin films at electrode surfaces. PM IRRAS relies on the surface selection rules stating that the p-polarized IR beam is enhanced, while the s-polarized beam is attenuated at the metal surface. The difference between p- and s-polarized beams eliminates the background of the solvent and provides IR spectra at a single electrode potential. In contrast, two other popular in situ IR spectroscopic techniques, namely, subtractively normalized interfacial Fourier transform infrared spectroscopy (SNIFTIRS) …

Redox-Active Monolayers On Ito Prepared By Post-Amidation And Direct Esterification And Their Spectroelectrochemical Characterization, Takamasa Sagara, Sae Nakai, Ryusuke Yofu, Shota Kojin

Journal of Electrochemistry

A redox-active monolayer on an optically transparent electrode constitutes a typical platform for spectroelectrochemical sensing. The necessity for its sophistication arises from the availability of multi-dimensional sensing signals. Simultaneous monitoring of the redox current and color change synchronized with the oxidation state change significantly enhances sensitivity and selectivity. This study aimed to elucidate the modification of an indium tin oxide (ITO) electrode with a viologen monolayer with an ordered orientation. Novel methods were developed to immobilize a viologen molecule bearing a carboxyl group to form assembled monolayers through a condensation reaction using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide with N-hydroxy-succinimide (EDC/NHS). In the two methods …

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO₂ capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Colloidal Hot-Injection Synthesis Of Cubse2 Nanocrystals: Tetragonal Chalcogenide Templates For Superionic Lithiation Pathways, Yunhao Xu, Niket Powar, Kelly Zervos, Isabella Campbell, Simran Choudhary, Layan Al-Khaled, Progna Banerjee

Chemistry: Faculty Publications and Other Works

Copper boron selenides represent a previously unexplored class of materials with tetragonal structural symmetries and bonding chemistries potentially relevant to lithium-ion conduction. In this work, the first colloidal synthesis of nanocrystalline copper boron selenides is reported, enabling access to nanocrystals with reaction times shown as the synthetic knob to control composition and morphology. Copper boron selenide nanocrystals are synthetically designed as precursors for lithiation reactions aimed at probing structural evolution and ionic mobility pathways toward superionic conductors applicable as solid electrolytes in lithium-ion batteries. Postsynthetic lithiation studies under ambient conditions reveal a series of phase transformations and morphological changes, which …

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Performance Evaluation Of Aminated Multi-Walled Carbon Nanotubes Incorporated With Green Synthesized Iron Nanoparticles For Toxic Dyes Sequestration From Textile Wastewater, Titus Chinedu Egbosiuba, Cynthia Chukwuemeka, Jonah Chukwudi Umeuzuegbu, Nwanneka Chibuzo Mmonwuba, Ugochukwu Ewuzie, Monday Uchenna Okoronkwo, Valentine Chikaodili Anadebe, Saheed Mustapha, Ambali Saka Abdulkareem, Jimoh Oladejo Tijani, Ashish Patel, Virendra Kumar Yadav

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates the performance of aminated multi-walled carbon nanotubes (AM-MWCNTs) integrated with zerovalent iron nanoparticles (ZVI) synthesized using cashew leaf (Anacardium occidentale) extract (AM-MWCNTs@ZVI) for the removal of Congo Red (CR) and Methylene Blue (MB) dyes from textile industrial wastewater. The nanocomposite was characterized using FTIR, XRD, BET, HRSEM, and HRTEM analyses, confirming its functional groups, crystalline structure, and enhanced surface area of 1050.4 m²/g. The ecological risk degree of the textile pollutants was assessed to determine the percentage concentrations of crystal violet, Congo red, methyl orange, methylene blue and rhodamine B. Batch adsorption experiments identified optimal …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Optimization Of Renewable Energy Systems: Comparative Analysis Of Advanced Algorithms And Photovoltaic-Electrolyzer Performance For Cost Reduction And Efficiency Enhancement, Mohamed-Amine Babay, Mustapha Adar, Ahmed Chebak, Mustapha Mabroukia

Journal of Electrochemistry

The increasing demand for cost-effective and efficient renewable energy solutions presents significant optimization challenges in hybrid energy systems. This paper addresses these challenges by conducting a comparative analysis of three advanced optimization algorithms—Lévy Flight Optimization (LFO), Archimedean Optimization (AO), and Quantum Gorilla Optimization (QGO)—to minimize the Total Net Present Cost (TNPC) and Levelized Cost of Energy (LCOE) in hybrid renewable energy systems. The study integrates critical cost parameters such as Capital Expenditure (CAPEX), Operational Expenditure (OPEX), replacement costs, and salvage values into an advanced optimization framework. Three system configurations are evaluated: Wind Turbines and Fuel Cells (WT/FC), Photovoltaic Systems and …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

First-Principles Studies Of Electrical Polarization Effects In Ferroelectrics, Antiferroelectrics And Defects, Louis Alaerts

Dartmouth College Ph.D Dissertations

Over the last few decades, density functional theory (DFT) has emerged as a formidable tool in the field of computational material science. Not only has it become a complementary method approach to experiments by rationalizing the many complex properties of materials but its formidable predictive power can also be used to identify the most promising candidates for specific applications. Point defects in semiconductors have become an important platform for the development of quantum networks due to their ability to act as spin-photon interfaces. Spectral diffusion, the broadening of the optical emission line, can significantly impact the performance of these defect-based …

Modeling Degradation In Li-Ion Batteries: Analyzing Single-Cell Degradation And Applying It To Customized Pack-Level, Mohannad Y. Alkhalil

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The rapid expansion of lithium-ion (Li-ion) battery applications in areas such as electric vehicles (EVs), renewable energy storage, and portable electronics has drawn attention to the need for improving their performance, safety, and longevity. As Li-ion batteries become essential across technologies, understanding degradation mechanisms is critical for optimizing design and ensuring reliable operation. This work provides a detailed overview of modeling degradation in Li-ion batteries, focusing on single-cell behavior and its implications for pack-level performance.

The PyBaMM (Python Battery Mathematical Modeling) package, an open-source battery simulation tool written in Python, is used for single-cell simulations. Liionpack, another Python-based library, is …

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Comparison And Evaluation Of Overlay And Leveling Binder In Traffic Circle Construction, Pratik Neupane

Graduate Theses and Dissertations (2019 - present)

Traffic circles play a vital role in managing traffic flow and ensuring safety, yet their unique traffic conditions make them prone to early cracking and deformation. This study evaluated the performance of overlay and leveling binder asphalt mixtures for a reconstructed traffic circle at the University of South Alabama, using plant-mixed laboratory-compacted (PMLC) specimens. Volumetric analyses were performed to determine maximum specific gravity (Gmm), bulk specific gravity (Gmb), and air voids content. Laboratory tests were conducted on both the overlay and leveling binder layers using indirect tensile cracking test (IDEAL-CT) and indirect tensile rutting test (IDEAL-RT) to assess cracking tolerance …

The Evolution Of Nanoparticles In Nanoparticle Doped Optical Fibers, Mary Cahoon

All Dissertations

Optical fiber and fiber laser technologies based on silica glass are critical to many technologies today. One method to improve the optical performance of laser fibers is engineer the local environment around the active elements in the glass. To that end, this Dissertation focused on the fabrication and characterization of fibers made with nanoparticles incorporated into the glass to control the local composition. First, the nanoparticle composition and structure was analyzed as it evolved from from the initially-synthesized form to incorporation into the dense aluminum-silicate glass. The aluminum oxide in the glass was found to be important not only to …

Variation Of Membrane Electrode Assembly Catalyst Layer In Unitized Regenerative Fuel Cell, Yollanda Nurcholifah, Dedi Rohendi, Edy Herianto Majlan, Nirwan Syarif, Addy Rachmat, Dwi Hawa Yulianti, Nyimas Febrika S

Journal of Electrochemistry

A unitized regenerative fuel cell (URFC) is a device that may function reversibly as either a fuel cell (FC) or water electrolysis (WE). An important component of this device is the Membrane electrode assembly (MEA). Therefore, this study aimed to compare the performance outcomes of MEA using electrodes with single and three catalyst layers. This study measured Electrochemical Surface Area (ECSA), Electrochemical Impedance Spectroscopy (EIS), X-ray Diffraction analysis (XRD), and X-ray Fluorescence (XRF). Furthermore, the round-trip efficiency (RTE) of the MEA, as well as the performance in FC and WE mode, was measured. In comparison, The ECSA values of Pt-Ru/C …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}