Inorganic Chemistry Commons^™

Increasing Photocatalytic Activity Of Tio₂ Nanocrystals With Cobalt Dopants And Nio Heterojunctions, Lara A. Haack

Honors Thesis

Carbon emissions and fossil fuel usage has increased dramatically in recent decades, and the need for renewable energy has grown with it. Photocatalytic processes on titanium dioxide (TiO₂) nanocrystals may be used for solar energy driven production of fuel/oxidizer pairs. Many different methods have been developed to increase the effectiveness of TiO₂ in photocatalysis, including dye sensitization, quantum dot sensitization, doping with metals and non-metals, and the surface attachment of cocatalyst materials. Impurity dopants are not susceptible to photo-bleaching or degradation and judicious selection of cocatalyst materials can lead to robust all-inorganic heteronanocrystal photocatalysts: whereas, the use of molecular dye …

Comparative Development Of Mof‑Based And Mof‑Free Agnp Functionalized Zno Nanorod–Cotton Fabric Composites For Photocatalytic Applications, Md Al Mamun

Master's Theses

Photocatalysis offers a cost‑effective and environmentally friendly strategy for degrading organic pollutants and addressing energy and environmental challenges. This study initially explored MOF‑based cotton‑fabric‑supported ZnO nanorod composites but found that the MOF component primarily acted as an adsorbent rather than an effective photocatalyst. Consequently, MOF‑free composites were developed by directly growing ZnO nanorods on cotton fabric and functionalizing them with silver nanoparticles. Photocatalytic testing revealed that AgNP‑modified ZnO nanorods, particularly at 10 mM AgNP, exhibited superior dye degradation efficiency, thereby demonstrating a scalable and effective photocatalytic platform.

Synthesis Of Phenyl-Substituted Zinc Dipyrrin Photosensitizer For Carbon Dioxide Reduction, Stephen Ankomah

Electronic Theses and Dissertations

The release of CO₂ from fossil fuel combustion drives the need for its conversion into more sustainable options like CO and CH₄ via photocatalytic reduction. This process requires a catalyst, sensitizer, and electron donor. Zinc dipyrrin-based complexes are promising photosensitizers, offering an alternative to expensive, rare-metal-based systems. Most first-row transition metal dipyrrin compounds have short excited-state lifetimes due to rapid nonradiative decay, but Zn(II) dipyrrin complexes stand out. With a d¹⁰ configuration, they lack deactivating ligand field states and can access long-lived triplet states through a charge-separated intermediate. A phenyl-substituted Zn(II) dipyrrin complex was synthesized and studied using NMR to …

Synthesis And Characterization Of Indole-Based Zinc Dipyrrin Photosensitizers, Jean-Pierre Sanza

Electronic Theses and Dissertations

Metal complexes of dipyrromethene (dipyrrins) used as sensitizers in photocatalysis offer a way to harness solar energy in chemical bonds to create new fuels. This offers the dual role of reducing fossil fuel dependence and atmospheric CO₂ levels. Traditionally, metal dipyrrin complexes are synthesized using substituted pyrroles, aldehydes, and transition metals. Indoles have a more expanded pi-electron system and their dipyrrin-type complex may exhibit visible light absorption, suggesting that they can act as photosensitizers for CO₂ reduction processes. A novel indoledipyrromethene was synthesized using unsubstituted indole and mesitaldehyde. The complex exhibits visible light absorption at 422 nm. Its …

Tellurorhodamine Photocatalysts In Aerobic Oxidation Reactions: Development Of Synthetic Methods And Reaction Mechanisms, Irving D. Rettig

Dissertations and Theses

Aerobic oxidation photocatalysis involves the use of oxygen as an oxidant species, coupled to a light driven catalyst to achieve useful chemical transformations. Catalytic aerobic oxidation reactions can be defined as either oxidase-like, in which O₂ acts as an electron donor/acceptor but is not incorporated into the reaction products, or oxygenase-like where O₂ acts as an electron donor/acceptor and is incorporated into the reaction products. A multitude of inorganic catalysts have been developed that can achieve a wide scope of oxidase-like or oxygenase-like reactivity, however, it is rare for a catalyst to be capable of both. We report …

Interactions Of Organic Fluorophores With Plasmonic Surface Lattice Resonances, Robert J. Collison

Dissertations, Theses, and Capstone Projects

It is common knowledge that metals, alloys and pure elements alike, are lustrous and reflective, the more so when a metal surface is flat, polished, and free from oxidation and surface fouling. However, some metals reflect visible light, in the 380 nm to 740 nm range of wavelengths, much more strongly than others. In particular, some metals reflect wavelengths in certain portions of the ultraviolet (UV), visible, and near-infrared (NIR) regime, let us say 200 nm to 2000 nm, while absorbing light strongly in other segments of this range. There are several factors that account for this difference between various …

Gas Chromatography Analysis Of Co2 Reduction Photocatalysis With Zinc Dipyrrin Complexes, Alex Day

Undergraduate Honors Theses

Bis(1,3,7,9-tetramethyl-5-mesityldipyrrinato)zinc(II) (ZnDPY) was synthesized in the lab by the McCusker group and a procedure was created to analyze its ability as a photosensitizer, a molecule that provides the energy for the reaction to occur by capturing light energy and turning it into a form that can be used by the photocatalyst. While more work is needed, preliminary steps have been made to create a process that can analyze the amount of carbon monoxide produced by a photocatalytic CO₂ reduction reaction with ZnDPY as the photosensitizer. Progress has been made via the setup of a reaction apparatus, targeted gas chromatography …

Metallic Systems At The Nano And Micro Scale: Bimetallic Nanoparticles As Catalysts And Mcraly Bond Coats In Thermal Barrier Coatings, Kenneth Kane

Theses and Dissertations

The dissertation is split into two parts. The first part will be focused on changes in material properties found at the nanoscale, as miscibility and electronic structure can change significantly with size. The formation of classically-immiscible bimetallic nanoparticles (BNPs) becomes favorable at the nanoscale and novel catalytic properties can emerge from the bimetallic alloying. The formation of alloyed and non-alloyed BNPs is achieved through pulse laser ablation (PLA) and a significant increase in catalytic activity is observed for both. Recently discovered, the increased activity in the non-alloyed BNPs, deemed multicomponent photocatalysis, is examined and the proposed mechanism discussed. The second …

Imidazolium Ionic Liquids As Multifunctional Solvents, Ligands, And Reducing Agents For Noble Metal Deposition Onto Well-Defined Heterostructures And The Effect Of Synthetic History On Catalytic Performance, Michael Drake Ballentine

Masters Theses & Specialist Projects

1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM]Tf2N) was investigated as a multifunctional solvent, ligand, and reducing agent for platinum deposition onto well-defined CdSe@CdS nanorods. Platinum deposition was carried out thermally and photochemically using Pt(acac)2 as the metal precursor. Thermal deposition was investigated in [BMIM]Tf2N with and without addition of a sacrificial reducing agent, and product topology was compared with the products obtained from polyol reduction using 1,2-hexadecanediol, oleic acid, and oleylamine in diphenyl ether. Photochemically induced platinum deposition was carried out at room temperature in [BMIM]Tf2N, and product topology was compared with the photodeposition products obtained from a toluene dispersion. Thermal deposition of platinum …

Real Time Monitoring Of Photocatalysis: An Application And Expansion Of The Quartz Crystal Microbalance, Perrin Godbold

Senior Honors Projects, 2010-2019

There are many applications of photocatalytic chemistry, with hundreds of researchers investigating photocatalytic materials. Another method of investigation could aid these researchers and contribute significantly to this field. This study attempts to develop a new method of analysis by expanding the capabilities of the Quartz Crystal Microbalance (QCM) into the realm of photocatalysis. We coated QCM crystals with the stable and well-known photocatalyst, titanium dioxide, and utilized these coated crystals to begin to develop an analysis procedure for our modified instrument. Some indication of the QCM’s sensitivity was seen, but the UV irradiation elicited a frequency change independent of the …

Design Of 3d Macroporous Inverse Opal Tio2 Binary And Ternary Composites Sensitized With Gold Nanoparticles And Cds Quantum Dots For Photocatalysis, Daniel A. Corella

Master of Science in Chemical Sciences Theses

Materials composed of titanium (IV) oxide (TiO₂) have received enormous scientific interest due to titania’s abundance, non-toxicity, and photocatalytic proficiency, however its large band gap limits its applicability under ambient conditions. Various attempts have been made to incorporate titania into composite systems to sensitize it for activity under a broader range of wavelengths. One such method includes utilizing narrow band gap semiconductors to form an electron transfer process analogous to photosynthesis referred to as a Z-scheme. Z-scheme systems can catalyze the decomposition of aqueous pollutants via generation of reactive oxygen species after input of sunlight. This work reports …

Synthesis And Catalytic Applications Of Non-Metal Doped Mesoporous Titania, Syed Z. Islam, Suraj R. Nagpure, Doo Young Kim, Stephen E. Rankin

Chemical and Materials Engineering Faculty Publications

Mesoporous titania (mp-TiO₂) has drawn tremendous attention for a diverse set of applications due to its high surface area, interfacial structure, and tunable combination of pore size, pore orientation, wall thickness, and pore connectivity. Its pore structure facilitates rapid diffusion of reactants and charge carriers to the photocatalytically active interface of TiO₂. However, because the large band gap of TiO₂ limits its ability to utilize visible light, non-metal doping has been extensively studied to tune the energy levels of TiO₂. While first-principles calculations support the efficacy of this approach, it is challenging to …

Design And Synthesis Of Novel Octacarboxy Porphyrinic Metal–Organic Frameworks, Jacob A. Johnson

Department of Chemistry: Dissertations, Theses, and Student Research

Metal-Organic Frameworks (MOFs) are a class of nanoporous crystalline materials constructed via the interconnection between metal-ions/inorganic clusters and organic ligands. Since the surface area, pore size and distribution, and chemical functionalities of MOFs are highly tunable via the judicious combinations of inorganic clusters and organic ligands, MOFs have attracted intensive interests for a variety of applications including gas adsorption and separation, catalysis, chemical sensing, and drug delivery among others. Porphyrin based ligands are of particular interest for building functional MOFs due to their unique photo-, electro-, and catalytic properties. In addition, the four-fold symmetry of porphyrin ligands offers an effective …

A Highly Efficient Tio2-Xcx Nano-Heterojunction Photocatalyst For Visible-Light Induced Antibacterial Applications, Vinodkumar Etacheri, Michael Seery, Stephen Hinder, Georg Michlits, Suresh Pillai

Articles

Visible-light-induced antibacterial activity of carbon-doped anatase-brookite titania nano-heterojunction photocatalysts are reported for the first time. These heterostructures were prepared using a novel low temperature (100 °C) non-hydrothermal low power microwave (300 W) assisted method. Formation of interband C 2p states was found to be responsible for the band gap narrowing of the carbon doped heterojunctions. The most active photocatalyst obtained after 60 minutes of microwave irradiation exhibits a 2-fold higher visible-light induced photocatalytic activity in contrast to the standard commercial photocatalyst Evonik-Degussa P-25. Staphylococcus aureus inactivation rate constant for carbon-doped nano-heterojunctions and the standard photocatalyst was 0.0023 and -0.0081 min …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

Nitrogen And Copper Doped Solar Light Active Tio2 Photocatalysts For Water Decontamination, Mike Fisher, Donal Keane, Pilar Fernandez-Ibanez, John Colreavy, Stephen Hinder, Kevin Mcguigan, Suresh Pillai

Articles

A novel class of photocatalytic coating capable of degrading bacterial and chemical contaminants in the presence of visible sunlight wavelengths was produced by depositing a stable photocatalytic TiO

2 film on the internal lumen of glass bottles via a sol–gel method. This coating was prepared in either undoped form or doped with nitrogen and/or copper to produce visible light-active TiO2 films which were annealed at 600 ◦C and were characterized by Raman and X-ray photoelectron spectroscopy. The presence of doped and undoped TiO2 films was found to accelerate the degradation of methylene blue in the presence of natural sunlight, while …