Inorganic Chemistry Commons^™

A Facile Auto-Combustion Pathway For Creating Mn- And Fe-Doped Tio2 Nanostructures And Their Photocatalytic Activity, Gharieb Meselhy

Dentistry

Using a combination of two fuels, an auto-combustion method was used to synthesize pure TiO2 and doped TiO2 with different concentrations of iron(III) (Fe) and manganese(II) (Mn) (1, 3, 5, and 7 mol%). The as-prepared materials were characterized using different techniques, including thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), and high-resolution transmission electron microscopy (HR-TEM). The XRD results showed that both pure TiO2 and all doped TiO2 samples had the anatase phase, indicating the crystalline nature of all the as-prepared nanomaterials. Crystal violet decolorization under UV irradiation was used to …

Mechanisms Of Dendritic Shorting In Lithium Metal Batteries With Li7la3zr2o12 Solid Electrolytes, Lukas Karapin-Springorum

Pomona Senior Theses

Energy storage will play a crucial role in efforts to mitigate the effects of climate change caused by greenhouse gas emissions from human activity. Lithium metal batteries using solid electrolytes like Li₇La₃Zr₂O₁₂ have higher energy density than lithium-ion batteries, which may enable a more rapid and complete electrification of transportation. However, lithium metal batteries suffer from undesirable short-circuiting when metallic lithium deposits connect the two electrodes. It has been debated whether these lithium dendrites generally grow directionally from the anode or are generated by the reduction of lithium ions inside the solid electrolyte, …

A Comparative Study Of Cationic Copper(I) Reagents Supported By Bipodal Tetramethylguanidinyl-Containing Ligands As Nitrene-Transfer Catalysts, Suraj Kumar Sahoo, Brent Harfmann, Himanshu Bhatia, Harish Singh, Srikanth Balijapelly, Amitava Choudhury, Pericles Stavropoulos

Chemistry Faculty Research & Creative Works

The Bipodal Compounds [(TMG2biphenN-R)CuI-NCMe](PF6) (R = Me, Ar (4-CF3Ph-)) And [(TMG2biphenN-Me)CuI-I] Have Been Synthesized With Ligands That Feature A Diarylmethyl- And Triaryl-Amine Framework And Superbasic Tetramethylguanidinyl Residues (TMG). The Cationic Cu(I) Sites Mediate Catalytic Nitrene-Transfer Reactions Between The Imidoiodinane PhI = NTs (Ts = Tosyl) And A Panel Of Styrenes In MeCN, To Afford Aziridines, Demonstrating Comparable Reactivity Profiles. The Copper Reagents Have Been Further Explored To Execute C-H Amination Reactions With A Variety Of Aliphatic And Aromatic Hydrocarbons And Two Distinct Nitrene Sources PhI = NTs And PhI = NTces (Tces = 2,2,2-Trichloroethylsulfamate) In Benzene/HFIP (10:2 V/v). Good Yields …

Introducing Ordered Silicon Vacancies Into Wsi2, Grace M. Atkins

Graduate Theses/Dissertations

Thermoelectric materials are very useful in industry due to their unique ability to convert waste heat into electricity. One such reported thermoelectric material is rhenium silicide (ReSi_1.75▯_0.25), resulting from ordered silicon vacancies in its crystal structure. The purpose of this project is to dope tungsten silicide (WSi₂) with more electron rich elements to find a ternary silicide with a similar crystal structure to ReSi_1.75▯_0.25, in order to synthesize a less expensive thermoelectric material. Two synthesis methods are used in this project to dope WSi₂. Powder x-ray diffraction (XRD) …

Compton Scattering Of Mammographic Soft X-Ray Beams By Alkali And Transition Metal Salt Filters Produce X-Ray Interference Zones That May Have Treatment Potential For Localized Cancer Lesions, Subhendra N. Sarkar, Eric Lobel, Sabina Rakhmatova, Derbie Desir, Somdat Kissoon, Daler Djuraev, Katie Tam

Publications and Research

In breast x-ray imaging scattered radiation adds 50% of harmful radiation dose from anisotropic Compton scattering mechanism. We have been working with double layered inorganic salt materials that can induce Compton scattering to the incident mammographic x ray beams (in 20-30 kVp range) with adequate isotropy (angular control). Typically metal nitrates and alkali halide salt layers are shown here to cause low energy radiation interference zones with high and low photon intensities and local flux heterogeneity in terms of flux covariance. Spatial variation of low energy photon flux creates concentrated and sparse radiation zones that may be used to induce …

Interface Engineering Of Lithium Metal Anodes Via Atomic And Molecular Layer Deposition, Xiangbo Meng

Mechanical Engineering Faculty Publications and Presentations

Rechargeable batteries are playing an ever-increasing important role in our society. Their performance (such as cell cyclability, safety, and lifespan) is critical for their applications. Among the various factors related to cell performance, interfaces, which ubiquitously exist between an electrode and an electrolyte, have some significant functions. They mostly evolve and degrade with cell cycling. Thus, an ideal interface should be physically and electrochemically stable and able to provide a compatible environment for electrolytes and electrodes in cells. To this end, interface engineering is needed and has become an important area. It has been achieved via different strategies. In the …

Effect Of Π-Conjugated Ligands And A* Site Organic Cations On The Energetic Properties And Photovoltaic Performance Of Metal Halide Perovskites, Harindi R. Atapattu

Theses and Dissertations--Chemistry

Metal halide perovskites have gained interest in optoelectronic applications such as photovoltaics, lasers, LEDs, transistors, and photodetectors due to their excellent semiconducting properties considering their low cost. Metal halide perovskite (HP) photovoltaics have rapidly increased in power conversion efficiency (PCE), which now exceeds 25%. HPs have gained attention in these applications due to their high tolerance towards defects, long charge carrier diffusion lengths, high charge carrier mobility, high optical absorption, and bandgaps that are tunable over a large range. Even though HP photovoltaic PCEs are improved these are still not commercially available due to them showing lower stability and energy …

Synthetic Strategies Toward The Development Of Stable Gold-Based Anticancer Agents And Their Mechanistic Insight, Adedamola Arojojoye

Theses and Dissertations--Chemistry

Despite notable advancements in the design and synthesis of novel chemotherapeutic drugs, cancer continues to be a leading cause of death in the United States. Metallodrugs, especially Au complexes, have played a prominent role in the search for the next generation of chemotherapeutic agents. Herein, I report on the synthetic strategies towards the rational design of stable Au (Au)-based agents, study their reactivity in biological environment, and offer insights into the cytotoxic mechanism of action in cancer. Chemotherapeutic Au compounds exist mainly in +I or +III oxidation states. Repurposing of the Au(I) FDA approved auranofin for the treatment of diseases …

Stability Of Organic Metal Halide Perovskites, S S M Tareq Hossain

Theses and Dissertations--Chemistry

Perovskites have emerged as a promising candidate for low-cost production of solar cells. However, the most critical barrier for commercialization of perovskite solar cells (PSCs) is the inadequate stability of the organic metal halide perovskites (OMHPs). The degradation of OMHPs is induced by light, heat, air, and electrical bias. The known degradation pathways involve the oxidation of I- and Sn2+, dissolution of perovskites by moisture, irreversible reactions with water, ion migration, and ion segregation. To improve the stability of OMHPs various methods are adopted, such as additive engineering, perovskite surface treatment, and composition engineering. Surface ligands are used on top …

Fundamental Studies Of Optical Properties And Electrocatalytic Properties Of Low Dimensional Nanomaterials Carbon Nano Dots And 2d Transition Metal Dichalcogenides, Nadeesha Kothalawala

Theses and Dissertations--Chemistry

Low dimensional nanomaterials are widely used in a variety of applications such as opto-electronics, energy production and storage, and bio-medical applications due to their unique optical, catalytic, electronic, and mechanical properties. Most of the nanomaterials offer a plethora of modifications in their structure, composition, morphology, and dimensionality that can lead to the manipulation of their physiochemical properties. This dissertation presents insight into two types of compelling nanomaterials: carbon nanodots (CND) and transition metal dichalcogenides (TMD), investigating their optical and electrocatalytic properties respectively.

Carbon nanodots (CND) are a promising class of photoluminescent nanomaterials that hold a significant potential in many optoelectronic …

Concentration Effects Of Ytterbium(Iii) Ions On The Physical, Structural, Thermal, And Optical Properties Of Barium Phosphate Glasses, Richard Amesimenu

College of Graduate Studies: Theses & Dissertations

Ytterbium(III)-doped glasses are widely known for their application in near-infrared (NIR) lasers and nowadays attract attention for solar spectral conversion in photovoltaic cells. In this study, the effects of ytterbium(III) concentration on the physical, structural, optical, and thermal characteristics of Yb-doped phosphate glasses were investigated. The glasses were synthesized using the melt-quenching technique with nominal compositions of 50P₂O₅:(50 – xBaO):xYb₂O₃ (x = 0, 0.5, 1.0, 2.0, 3.0 and 4 mol%). The properties were then examined by density and related parameters, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform-infrared …

Recovering Relativistic Effects In Electronic Structure Calculations Of F-Element Single Molecule Magnets, Nathan Roy Loutsch

Dissertations and Theses

There has been a great interest in developing new information technologies. Single molecule magnets (SMMs) are emerging as materials for high density data storage, qubits, and molecular spintronics. SMMs containing lanthanide or actinide centers are of interest due to their potentially high magnetic anisotropy. This would enable the use of SMMs at higher temperatures. Accurately modelling the electronic structure of f-element complexes can be quite challenging. Density Functional Theory (DFT) is a popular choice for optimizing geometry and studying the electronic structure due to its relatively low cost. In certain cases, more accuracy is desired or necessary to predict experimental …

Chemical Reduction Of Curved Molecular Nanographenes: Metal Intercalation And Core Transformation, Yikun Zhu

Electronic Theses & Dissertations (2024 - present)

The promising lithium storage capacity and fast charge transport rate make graphene a great candidate for energy storage applications. However, the harsh synthetic conditions lead to uneven size distribution and poor solubility, posing limitations on further applications and modifications of graphene and its derivatives. Molecular nanographenes, as graphene cutouts, possess outstanding chemical and physical properties stemming from their parent graphene but also demonstrate such unique features as controllable synthetic conditions, defined molecular structures, uniform size, and relatively good solubility. The improved solubility enables the use of solution chemistry methods for design modifications of molecular nanographenes and for systematical investigation of …

Molecular-Level Design Of Heterometallic Precursors For Rechargeable Battery Cathode Materials, Yuxuan Zhang

Electronic Theses & Dissertations (2024 - present)

The synthetic methods for rechargeable battery cathodes are rapidly evolving along with the continuous advancement of the materials themselves. Utilizing precursors for the synthesis of Li- and Na-ion cathode materials are known to ensure a phase-pure product with isotropic element distribution, thereby further enhancing the electrochemical properties of the cathode material. As more cathode materials with complex compositions continue to emerge, the strategies for designing the corresponding precursors are also getting diversified. One of the most promising directions is the employment of single-source precursors (SSPs), defined as molecules that contain all necessary elements in the proper ratio and decomposable under …

Coordination Chemistry Using Strategic Design Of Ligands For Switchable Properties, Delara Joekar

Theses and Dissertations (Comprehensive)

Coordination-driven self-assemblies are multifunctional molecular systems that provide an efficient method for miniaturization towards functional devices with diverse applications. Herein, the synthesis of novel pyrazole-based ligands suitable for construction of coordination assemblies is reported. These were designed using a strategy that incorporates the presence of both cationic and anionic coordination sites, and a third site for further functionalization. This design strategy has been used because there is still a knowledge gap for controlling the directionality of weak molecular forces in the presence of stronger competing forces. The structural characterization of these ligands, their Hirshfeld surface analysis, and select coordination complexes …

Use Of Interlaboratory Studies For The Development Of Consensus-Based Criteria For The Elemental Analysis Of Electrical Tapes, Lacey M. Leatherland

Graduate Theses, Dissertations, and Problem Reports (ETD)

Tape evidence is often used in criminal cases involving violent crimes, kidnappings, improvised explosive devices (IEDs), and drug trafficking. This evidence can reveal potential links between suspects, items, or scenes. The forensic examination of electrical tape can provide investigative leads or offer support to alternative hypotheses evaluated in the courtroom. A conventional analytical scheme includes microscopic examination, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy Energy Dispersive Spectrometry (SEM-EDS), and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS). Elemental analysis of electrical tapes is commonly achieved using SEM-EDS; however, recent scientific literature suggests that this analysis can evolve from using SEM-EDS to …

Additive-Dependent Regioselective Boracarboxylation Of Alkenes Using Low Valent Copper And Co2, Carly H. Gordon Ph.D.

Graduate Theses, Dissertations, and Problem Reports (ETD)

As a major greenhouse gas, carbon dioxide (CO₂) is an abundant and renewable C₁ feedstock, and developing methods for fixing CO₂ into high-value products is a major interest for the movement of greener chemistry. The boracarboxylation of alkenes provides access to difunctionalized products containing pharmaceutically relevant motifs, including carboxylic acids and boron-containing moieties. Significant work has been done to improve the versatility and efficiency of this methodology, with the recent expansion into a wide variety of terminal alkenes. The use of different phosphine and alkene additives have demonstrated positive effects on reaction rates and productivity, indicating …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …