Inorganic Chemistry Commons^™

Synthesis And Characterization Of Some Disubstituted Cyclopentadienyl Rhenium Complexes As Potential Candidates In Semiconductive Materials, Chloe Vernon

Senior Honors Theses

Since 2000, when the Nobel Prize in Chemistry as awarded for conductive polymer research few studies have been performed concerning the conductive capabilities of discrete organometallic compounds. For this project, organometallic compounds were formed specifically with a transition metal included in the structure. Through oxidation and reduction reactions, the variation in the electrical conductivity could allow for an analysis of whether this unique structure would allow for tunability. The goal of this research was to begin with aromatic substituted fulvenes and perform various multistep synthesis processes, utilizing thallium salt intermediates, to produce several disubstituted cyclopentadienyl rhenium complexes. In this project, …

Synthesis, Characterization, Dna Binding, Topoisomerase Inhibition, And Apoptosis Induction Studies Of A Novel Cobalt(Iii) Complex With A Thiosemicarbazone Ligand, Stephen J. Beebe, Michael J. Celestine, Jimmie L. Bullock, Shayna Sandhaus, Jessa Faye Arca, Donald M. Cropek, Tekettay A. Ludvig, Sydney R. Foster, Jasmine S. Clark, Floyd A. Beckford, Criszcele M. Tano, Elizabeth A. Tonsel-White, Raj K. Gurung, Courtney E. Stankavich, Yuk-Ching Tse-Dinh, William L. Jarrett, Alvin A. Holder

Bioelectrics Publications

In this study, 9-anthraldehyde-N(4)-methylthiosemicarbazone (MeATSC) 1 and [Co(phen)₂(O₂CO)]Cl·6H₂O 2 (where phen = 1,10-phenanthroline) were synthesized. [Co(phen)₂(O₂CO)]Cl·6H₂O 2 was used to produce anhydrous [Co(phen)₂(H₂O)₂(NO₃)₃ 3. Subsequently, anhydrous [Co(phen)₂(H₂O)₂] (NO₃)₃ 3 was reacted with MeATSC 1 to produce [Co(phen)₂(MeATSC)](NO₃)₃·1.5H₂O·C₂ H₅OH 4. The ligand, MeATSC 1 and all complexes were characterized by elemental analysis, FT IR, UV–visible, and multinuclear NMR …

Leaving Ligand Effects On Reactivity And Solubility Of Monofunctional Platinum(Ii) Anticancer Complexes, Heidi Linn Hruska Millay

Masters Theses & Specialist Projects

Monofunctional platinum(II) complexes, such as phenanthriplatin and pyriplatin, have notably different characteristics from the bifunctional anticancer complexes, such as cisplatin and oxaliplatin, which have detrimental toxicities and resistance associated with them. The unique properties of the monofunctional complexes may be exploited to target cancer cells without producing the toxic side effects associated with the current FDA-approved platinum-based anticancer drugs. To advance the understanding of these monofunctional platinum(II) complexes, this study replaced the chloride leaving ligand with an acetate group, which should increase solubility and alter the rate of reactivity with key amino acid and nucleotide targets. Phenanthriplatin and pyriplatin compounds …

Interaction Of A Platinum Triamine Complex Having A Seven-Membered Chelate Ring With N-Acetyl-Lmethionine And Guanosine 5'-Monophosphate, Jae Ko

Masters Theses & Specialist Projects

In the 1960s, Rosenberg and his colleagues confirmed the anti-cancer activity of cisplatin. Although cisplatin was capable of killing testicular cancer cells there were also serious side effects. It was necessary to find alternate ways of overcoming side effects, and soon many researchers have discovered novel platinum compounds that show similar reactivity. Recently, replacing one chloride group to a heterocyclic amine group showed significant cytotoxicity with a different binding activity than cisplatin. Previously in our lab, [Pt(Me5dien)(NO3)]+ and [Pt(Et2dien)Cl]+ have been synthesized and reacted with NAcetyl- L-methionine (N-AcMet) and Guanosine 5’-monophosphate (5’-GMP) showed unusual reactivity. Unlike most previously studied platinum …

Photochemical Investigation Of High-Valent Metal-Oxo Intermediates Containing Corrole And Light-Harvesting Porphyrin Ligands, Jonathan Malone

Masters Theses & Specialist Projects

In enzymatic and synthetic catalytic oxidations, high-valent iron-oxo intermediates play a vital role as the active oxidant. In this regard, many synthetic metal catalysts are designed as biomimetic models to resemble the active site of Cytochrome P450 enzymes (P450) which are the predominant oxidation catalysts in nature. Vitamin B12 cofactors, with a corrole-like structure corrin, are also utilized in some of the more difficult reactions in nature such as rearrangement and reductase reactions.

In this work, application of the promising photochemical method to corrolecontaining ligands systems showed much success in the generation of manganese(V)-oxo corrole intermediates using two electron-deficient corrole …

Organometallic Rhenium Dyes For Nitric Oxide Detection And Imaging, Lissette I. Lozano-Lewis

FIU Electronic Theses and Dissertations

The importance of sensing Nitric Oxide (NO) in physiology and medicine has led us to explore the reactivity of NO with organometallic Re dyes. Rhenium complexes were synthesized with the ability to react with NO and sense it under physiological conditions. Fluorescent 1,10-phenantroline complexes (phen)Re(PPh₃)(CO)₂OSO₂CF₃ (1) and (phen)Re(CH₃CN)(CO)₂OSO₂CF₃ (3) can sense NO in the range of 10 - 150 mM showing a decrease in fluorescence response at 514 nm and 532 nm respectively, upon NO-donor addition (l_exc = 360 nm). (phen)Re(THF)(CO)₂OSO₂CF …

Synthesis And Flammability Testing Of Epoxy Functionalized Phosphorous-Based Flame Retardants, Vladimir Benin, Xuemei Cui, Alexander Morgan, Karl Seiwert

Chemistry Faculty Publications

Several potential new phosphorus-containing flame retardant molecules were evaluated for heat release reduction potential by incorporation of the molecules into a polyurethane, generated from methylene diphenyl diisocyanate and 1,3-propane diol. The heat release reduction potential of these substances was evaluated using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods to qualitatively evaluate their potential reactivity into the polyurethane prior to heat release testing. The functionality of the flame retardants was epoxide based that would potentially react with the diol during polyurethane synthesis. Flammability testing …

Heat Release Of Polyurethanes Containing Potential Flame Retardants Based On Boron And Phosphorus Chemistries, Vladimir Benin, Bastien Gardelle, Alexander Morgan

Chemistry Faculty Publications

Using a polyurethane of methylene diphenyl isocyanate and 1,3-propane diol, several new non-halogenated aromatic boron and phosphorus flame retardants were evaluated for heat release reduction potential using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods, and were then analyzed via spectroscopic methods to determine if the flame retardant was still present in the final product. PCFC testing on the resulting products showed that the flame retardant molecule can have different effects on heat release depending upon how it is mixed into the polyurethane. Some …

Determination Of Corrosion Inhibitor Lubricity Improver In Jet Fuel By Liquid Chromatography-Electrospray Ionization Mass Spectrometry, David W. Johnson, Milissa Flake, Ryan Adams

Chemistry Faculty Publications

Military jet fuel (JP-8) is very similar to commercial jet fuel (Jet A) except for the presence of three additives, fuel system icing inhibitor, corrosion inhibitor–lubricity improver (CI-LI), and antistatic additive, which are added to improve characteristics of JP-8. Of particular interest is the CI-LI additive; the most common active ingredient is a dimer of linoleic acid. This article focuses on quantification of the active ingredient in the CI-LI additive by liquid chromatography–mass spectrometry (LC–MS). This method will allow the determination of CI-LI content in military jet fuel samples.

Science Classics, Mark Masthay

Chemistry Faculty Publications

An essay on the impact of the works in the Imprints and Impressions: Milestones in Human Progress, an exhibition of rare books from the collection of Stuart Rose. Exhibition was held Sept. 29-Nov. 9, 2014, at the University of Dayton.

Phosphate Esters, Thiophosphate Esters And Metal Thiophosphates As Lubricant Additives, David W. Johnson, John E. Hils

Chemistry Faculty Publications

Phosphate esters, thiophosphate esters and metal thiophosphates have been used as lubricant additives for over 50 years. While their use has been extensive, a detailed knowledge of how they work has been a much more recent development. In this paper, the use of phosphate esters and thiophosphate esters as anti-wear or extreme pressure additives is reviewed with an emphasis on their mechanism of action. The review includes the use of alkyl phosphates, triaryl phosphates and metal containing thiophosphate esters. The mechanisms of these materials interacting with a range of iron and steel based bearing material are examined.

Structure, Theoretical Studies And Coupling Reactions Of Some New Cyclic Boronic Esters, Andrew Kuttler, Sravanthi Durganala, Albert Fratini, Alexander Morgan, Vladimir Benin

Chemistry Faculty Publications

The present report describes the X-ray structural and theoretical studies of some new pinacolboronate esters, and it also outlines the use of the target structures in Suzuki coupling reactions to produce new aromatic or heteroaromatic esters and amides. X-ray structural analysis of the studied compounds revealed that the pinacolborane ring's position with respect to the benzene ring varies, depending on the particular environment. An ortho-positioned carboxylic ester (methyl ester) causes a nearly perpendicular orientation of the pinacolborane unit with respect to the benzene ring, whereas an ortho-positioned amide (N,N-dimethylamide) causes the pinacolborane unit to orient itself nearly coplanar. A plausible …

Ionic Conductivity In Non-Ionic Compounds, Usha Kranthi Avala

Masters Theses & Specialist Projects

The main objective of this work is to investigate the ionic conductivity of the drugs under certain conditions and also to compare the ionic conductivities of drugs determined by single surface sensors and parallel plate sensors. The ionic conductivity of various materials at their pre-melt and melt states are studied in order to further study a recently discovered phenomenon. Polar solids like Lidocaine, Ketoconazole, Procainamide and Nifedipine were examined in this study. Experimental studies show an increase in ionic conductivity in both pre-melt (20 -30 °C below melting temperature) and melt transition regions. Results of ionic conductivity of both parallel …

Characterization By Nmr Of Reactants And Products Of Hydrofluoroether Isomers, Cf3(Cf2)3och3 And (Cf3)2c(F)Cf2och3, Reacting With Isopropyl Alcohol, Howard Knachel, Vladimir Benin, William E. Moddeman, Janine C. Birkbeck, Thomas A. Kestner, Tayna L. Young

Chemistry Faculty Publications

The 3M Company product Novec™ 71IPA DL, a mixture of methoxyperfluorobutane, methoxyperfluoroisobutane and 4.5 wt.% isopropyl alcohol, has been found to be very stable at ambient temperature, producing fluoride at the rate of ~1 ppm/year. Our earlier kinetic and theoretical studies have identified the reaction mechanism. This paper identifies the ¹H and ¹⁹F NMR chemical shifts, multiplicities, and coupling constants of reactants and the major products that result from aging the mixture in sealed Pyrex NMR tubes for periods up to 1.8 years at temperatures from 26 °C to 102 °C. Chemical shifts and coupling constants of fluorine …

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils

Chemistry Faculty Publications

One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two different stainless steels at varying temperatures ranging from 300 °C to 350 °C in vacuum. Significant decomposition of the lubricant base-stocks and the phosphate ester additive did occur in most of the trials resulting in the formation of carboxylic acids and phenols. …

Preparation Of Phosphonoterephthalic Acids Via Palladium-Catalyzed Coupling Of Aromatic Iodoesters, Nathaniel Ivan, Vladimir Benin, Alexander Morgan

Chemistry Faculty Publications

The current article reports in detail the preparation of two phosphonoterephthalic acids: 2-phosphonoterephthalic acid (1) and 2,5-diphosphonoterephthalic acid (2). Efficient, scalable syntheses have been developed for both compounds based on Pd-catalyzed coupling reactions of iodinated terephthalate esters. Phosphonoterephthalic acids are potentially useful as flame-retardant additives or as monomers for the construction of acid-pendant polymer chains.

Reaction Between Polyol-Esters And Phosphate Esters In The Presence Of Metal Carbides, David W. Johnson, Carolyn Iacullo, John E. Hils

Chemistry Faculty Publications

The reaction of metal carbides with polyol esters found in aerospace lubricants and phosphate esters commonly used as additives was investigated. Carbides were of particular interest since modern materials under consideration at high temperature bearings have surfaces that are primarily metal carbides. Vanadium and chromium carbide were found to react with the ester and phosphate ester by a transesterification reaction, producing an alkyl phosphate which is less stable than the aromatic phosphate esters. In the process, the metal carbide is converted to the metal phosphate and metal polyphosphate, evidenced by the infrared and Raman spectra of the solid residue and …

Reactions Of Methyl Perfluoroalkyl Ethers With Isopropyl Alcohol: Experimental And Theoretical Studies, Howard Knachel, Vladimir Benin, Chadwick Barklay, Janine C. Birkbeck, Billy D. Faubion, William E. Moddeman

Chemistry Faculty Publications

The reaction of an isomeric mixture of the methyl perfluoroalkyl ether, C4F9OCH3 (Novec-7100), in the presence of isopropyl alcohol (IPA) and/or water has been studied by measuring the rate of product formation using an ion-selective electrode (ISE) for fluoride ion, Karl Fisher coulometric titrations for water, and 1H and 19F NMR spectroscopy for product identification and rate studies. The results showed the methyl perfluoroalkyl ether to be very stable with products forming at the rate of ∼1 ppm per year at a laboratory temperature of 20 °C. Measurements over the temperature range of 6° to 100 °C were made on …

Quantitative Analysis Of Some Important Metals And Metalloids In Tobacco Products By Inductively Coupled Plasma-Mass Spectrometry (Icp-Ms), Syed Ghulam Musharraf, Muhammad Shoaib, Amna Jabbar Siddiqui, Muhammad Najam-Ul-Haq, Aftab Ahmed

Pharmacy Faculty Articles and Research

Background: Large scale usage of tobacco causes a lot of health troubles in human. Various formulations of tobacco are extensively used by the people particularly in developing world. Besides several toxic tobacco constituents some metals and metalloids are also believed to pose health risks. This paper describes inductively coupled plasma-mass spectrometric (ICP-MS) quantification of some important metals and metalloids in various brands of smoked, sniffed, dipped and chewed tobacco products.

Results: A microwave-assisted digestion method was used for sample preparation. The method was validated by analyzing a certified reference material. Percentage relative standard deviation (% R.S.D.) between recovered …

Synthesis And Flame Retardant Testing Of New Boronated And Phosphonated Aromatic Compounds, Vladimir Benin, Sravanthi Durganala, Alexander Morgan

Chemistry Faculty Publications

The present report describes the preparation and use of some dimethyl terephthalate derivatives in transition metal-catalyzed coupling reactions to produce new reactive flame retardants. Dimethyl iodoterephthalate and dimethyl 2,5-diiodoterephthalate were successfully employed in the preparation of phosphonic and boronic esters and acids. The latter were tested for heat release with a microcombustion calorimeter (ASTM D7309) to determine the potential for heat release reduction of these flame retardant molecules. The results showed that the addition of boronic or phosphonic acids greatly lowered the heat release, due to a condensed phase (char formation) mechanism. Adding ester groups to the boronic acids or …

The Tetrafluoroborate Salt Of 4-Methoxybenzyl N-2-(Dimethylamino)Ethyl-N-Nitrosocarbamate: Synthesis, Crystal Structure And Dft Calculations, Helene Hedian, Vladimir Benin

Chemistry Faculty Publications

The tetrafluoroborate salt of 4-methoxybenzyl N-2-(dimethylamino)ethyl-N-nitrosocarbamate was prepared in two steps, via the corresponding carbamate. Its crystal structure is monoclinic, space group P21/c. The unit cell dimensions are: a = 19.499(8) Å, b = 5.877(3) Å, c = 15.757(7) Å, α = 90°, β = 110.019(7)°, γ = 90°, V = 1696.5(12) Å3, Z = 4. The structure exhibits an unexpected, pseudo-gauche conformation with respect to the C2–C3 bond, due to a stabilizing hydrogen bond between the carbonyl oxygen (O1) and the hydrogen atom at the trialkylammonium center (H3n), with a distance between them of …

Application Of Raman Spectroscopy To Lubricants, Lubricated Surfaces And Lubrication Phenomena, David W. Johnson

Chemistry Faculty Publications

Recent advances in lasers and detector technologies and the development of low-cost instruments and fiber-optic probes have brought about an explosion in the lubrication systems being studied by Raman spectroscopy. This article provides examples of the use of Raman spectroscopy in the study of lubrication phenomena, including the characterization of liquid lubricants, lubricant additives, and solid lubricants; the study of vapor-phase lubrication; and the use of coated nanoparticles as lubricants.

A Sodium Salt Of The Dimer Of Boronoterephthalic Acid Anhydride, Scott Simmons, Albert Fratini, Vladimir Benin

Chemistry Faculty Publications

The title compound, sodium bis­(6-carb­oxy-1-hy­droxy-3-oxo-1,3-dihydro-2,1-benzoxaborol-1-yl)oxidanium, Na+·C16H15B2O13-, was prepared in two steps from 2-bromo-p-xylene. Its crystal structure was determined at 140 K and has triclinic (P) symmetry. The compound presents a unique structural motif, including two units of the cyclic anhydride of boronoterephthalic acid, joined by a protonated, and thereby trivalent, oxonium center. Association in the crystal is realized by complementary hydrogen bonding of the carboxyl groups, as well as by coordination of the sodium cations to the oxygen centers on the five-membered rings.

Theoretical Investigation Of A Reported Antibiotic From The 'Miracle Tree' Moringa Oleifera, Michael Horwath, Vladimir Benin

Chemistry Faculty Publications

Moringa oleifera, sometimes called the “Miracle Tree,” has received international attention for its potential to improve health in impoverished tropical areas. In addition to high vitamin content in the leaves and pods, the tree contains compounds with antioxidant and antibacterial properties. This study focused on the theoretical investigation of the suggested structure of one antibacterial compound, “pterygospermin,” whose existence was proposed after some studies of the roots of M. oleifera. The structure of pterygospermin was first proposed by a research group working in the 1950s, but later studies have not found evidence of this compound and have instead …

Preparation And Characterization Of Some Substituted Benzyl N-Nitrosocarbamates Containing An N-2-(Methylthio)Ethyl Or A Bis(2-Aminoethyl)Sulfide Functionality, Satya Venkata, Eric Shamo, Vladimir Benin

Chemistry Faculty Publications

The synthesis and characterization of some substituted benzyl N-nitrosocarbamates with an N-2-(methylthio)ethyl or a bis(2-aminoethyl)sulfide functionality is reported, as a part of a long-term goal to design and prepare novel photolabile structures that could be used as substances for controlled release of alkylating and/or crosslinking agents. The synthesis was accomplished by reaction of benzyl chloroformates with the corresponding amines, resulting in the preparation of carbamates. The latter were subsequently nitrosated, utilizing two different N-nitrosation methods, to yield the target structures.

Preparation Of Halogenated Derivatives Of Thiazolo[5,4-D]Thiazole Via Direct Electrophilic Aromatic Substitution, Vladimir Benin, Alan T. Yeates, Douglas Dudis

Chemistry Faculty Publications

Chlorination and bromination reactions of thiazolo[5,4-d]thiazole led to the generation of its mono- and dihalogenated derivatives. These are the first instances of successful direct electrophilic aromatic substitution in the thiazolo[5,4-d]thiazole ring system. X-ray analysis demonstrates that both 2-bromothiazolo[5,4-d]-thiazole and 2,5-dibromothiazolo[5,4-d]thiazole are planar structures, with strongly manifested π-stacking in the solid state. Theoretical analysis of the pyridine-catalyzed halogenation (MP2/6-31+G(d) and B3LYP/6-31+G(d)calculations) reveals that introduction of one halogen actually leads to a slightly enhanced reactivity towards further halogenation. Several halogenation mechanisms have been investigated: 1) The direct C-halogenation with N-halopyridine as electrophile; …

C–N Bond Rotation And E–Z Isomerism In Some N-Benzyl-N-Methylcarbamoyl Chlorides: A Dft Study, Michael Horwath, Vladimir Benin

Chemistry Faculty Publications

The current report presents the first theoretical study of the restricted CN bond rotation in carbamoyl chlorides. Several N-benzyl-N-methylcarbamoyl chlorides were investigated, with varying pattern of substitution in the aromatic ring. Optimizations and frequency calculations were conducted employing DFT at the B3LYP/6-31+G(d) level of theory. Each of the studied structures exhibits a pair of rotamers (s-Z and s-E), generated upon rotation around the C(O)N bond. The s-E isomer is the global minimum in every case, but the preference for it is usually less than 1 kcal/mol. Two possible transition state structures were identified …

Secondary N-Nitrosocarbamate Anions: Structure And Alkylation Reactions. A Dft Study, Vladimir Benin

Chemistry Faculty Publications

The current article reports theoretical studies (DFT: B3LYP/6-31+G(d)) on the structure and alkylation reactions of the anions of some secondary N-nitrosocarbamates, a class of ambident nucleophiles whose chemistry has been little explored. Several anions (1–4), with an increasing size of the carbamate alkyl (aryl) group were investigated, in an attempt to establish the influence of the size of that group on the thermal stability and regioselectivity of alkylation of the title anions. The conclusion is that thermal stability and the mode of reaction are affected significantly only in the presence of very large and branched carbamate groups. The thermal …

Preparation Of Some Substituted Terephthalic Acids, Susanna Branion, Vladimir Benin

Chemistry Faculty Publications

We report in detail the preparation of two substituted terephthalic acids: 2‐sulfomethylterephthalic acid (1) and 2‐phosphonoterephthalic acid (2). Efficient, short syntheses have been developed for both compounds. They are potentially useful monomers for construction of acid‐pendant polymer chains.

Preparation, Characterization And Dft Studies Of Some New N-Nitrosocarbamates And N-Nitrosoureas, Ragavan Narayanan, Helene Hedian, Eric Shamo, Vladimir Benin

Chemistry Faculty Publications

We are presenting the preparation, characterization and density functional theory (DFT) studies {B3LYP/6-31+G(d)) of several reiated classes of N-nitrosocarbamates and N-nitrosoureas. The iong-range goal is the design and preparation of compounds, which would undergo photochemical or hydrolytic decomposition, to yield stabilized cyclic cations that can serve as alkylating agents at various nucleophilic centers, including DNA bases.