Inorganic Chemistry Commons^™

Developing Strategies For The Integration Of Metal–Organic Frameworks (Mofs) Into E-Textiles For Chemical Sensing, Filtration, And Detoxification, Aileen Mary Eagleton

Dartmouth College Ph.D Dissertations

Metal-organic frameworks (MOFs) are crystalline porous materials that offer modularity through diverse combinations of metal nodes and linkers, as well as tailorable surface chemistry and structure, along with tunable conductivity. The integration of these framework materials onto fibers can result in robust and flexible MOF-based textiles with enhanced functionality and applicability. This thesis illustrates the versatility of multifunctional MOF-integrated textile systems, showcasing their unique properties and the advantages of installing MOFs at the fiber level.

Leveraging Non-Covalent Interactions Between Small Organic Molecules And Inorganic Scaffolds In The Design Of Advanced Materials, Jonathan Lefton

Chemistry Theses and Dissertations

Powder diffraction is a powerful tool for studying crystal structures, especially as it relates to interactions of small organic molecules with inorganic compounds. The first part of this dissertation involves small organic ligands interacting with metal-organic framework, MOF-74. The first and simplest iteration involves the crystal structure solution of a neat, liquid loading of n-propylmercaptan to the open metal sites within the MOF-74 pores. Later studies investigate the leveraging of a similarly sized bitopic ligand in the solution loading of 1,2-ethanedithiol, which results in the amorphization of MOF-74. Having no crystallinity, amorphous or severely defected materials can be a …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

N–((2–Acetylphenyl)Carbamothioyl)Benzamide: Synthesis, Crystal Structure Analysis, And Theoretical Studies, Akin Oztaslar, Hakan Arslan

Karbala International Journal of Modern Science

N–((2–Acetylphenyl)carbamothioyl)benzamide has been synthesized and characterized. The molecular conformation of the investigated compound is stabilized by C16–H16B⋅⋅⋅O2ⁱ (i: 1+x, y, z) intermolecular and C14–H14⋅⋅⋅S1, N2–H2⋅⋅⋅O2, and N2–H2⋅⋅⋅O1 intramolecular H–bonds. All DFT calculations have been implemented at the B3LYP level with the 6–311G(d,p) basis set. The optimized molecular structure parameters have been compared with the experimental one in the solid phase. The energy gap, global chemical reactivity descriptor parameters, MEP, Fukui functions, DoS, NLO, and NBO analysis were also computed and investigated. The intermolecular interactions and their energies are evaluated using Hirshfeld surface and energy framework analyses. To determine …

Methods Of Magneto-Optical Spectroscopy And Analysis For Porphyrins And Polymer Thin-Films, Emigdio E. Turner

Chemistry and Chemical Biology ETDs

This dissertation describes the construction of two high precision magneto-polarimeters for performing Faraday rotation and Magnetic Circular Dichroism (MCD) measurements of polymer thin-films. There is a focus in materials science on the development of thin-film magneto-optically active materials. These materials could allow for the construction of a thin-film optical diode, an important device for next-generation photonic technology. Upon completion of the Faraday rotation spectrometer, two publications were generated from Faraday rotation measurements of novel polymer thin-film materials.

With growing interest by materials scientists in magneto-optically active transition-metal containing materials, an MCD spectrometer was constructed to study these materials. This spectrometer …

Tio2 Crystallization At Room Temperature And Preparation Of Transparent Carbon Counter Electrode For Low-Cost Dye-Sensitized Solar Cells, Muhammad Iqbal Syauqi, Afiten Rahmin Sanjaya, Mohammad Jihad Madiabu, Munawar Khalil, Jarnuzi Gunlazuardi

Makara Journal of Science

We developed a low-cost dye-sensitized solar cell (DSSC) using TiO₂ fabricated via rapid breakdown anodization (RBA) and ultrafast room-temperature crystallization (URTC). The prepared TiO₂ was deposited on a self-made fluorine-doped tin oxide (FTO) conductive glass, and the FTO/TiO₂ system was sensitized using curcumin dye. The DSSC was constructed by sandwiching the FTO/TiO₂/curcumin electrode with an I⁻/I₂ electrolyte and a transparent carbon counter electrode prepared using a liquid–liquid interface system. The characterization results showed that the TiO₂ freshly prepared via URTC was transformed into an anatase crystalline phase, which exhibited a 3.10 …

Sers For The Detection Of Trace Materials, Omari Kirkland

Dissertations, Theses, and Capstone Projects

In this dissertation are presented three projects that contribute to the body of research on SERS in the forensic, heritage, and semiconductor fields. The first project, Charge-Transfer mapping on GaN/Ag, a silver-decorated nanopillar semiconductor substrate fabricated from the GaN is used with the Raman probe Rhodamine 6 G (R6G) to map the effect of the nanofeatures on the CT resonance. The second project, in collaboration with Marco Leona from the Metropolitan Museum of Art, explores the use of AgNIFs to identify colorants used on textile fiber samples from four 19th century works of Japanese art. The final project analyzes the …

Photophysical And Photochemical Processes In Small Molecules And Materials For Solar Energy Conversion, Ethan Lambert

Honors Theses

The work covered in this thesis all falls under the theme of photophysical processes after light and matter interact. Those of primary interest are Raman scattering induced vibrations and excited state dynamics probed by transient absorption spectroscopy. Small molecules are studied with Raman spectroscopy and computational chemistry. These studies unearth the shifts in vibrational frequency as a function of charge transfer or receipt and how a quantitative assay of natural orbital populations and delocalization can offer both the nature and magnitude of this charge transfer. Further, a method is presented that builds upon previous work within the academic family tree; …

Halide Substitution Of Ternary Bismuth Chalcogenides For Photovoltaic Applications, Thomas Boggess

Theses and Dissertations

Semiconductors play an integral part in modern society. From computing to LEDs their use is ubiquitous, and no field is more reliant on them than that of power generation. Current political movements have seen a push to decrease reliance on traditional forms of power generation, which relies on fossil fuels, to renewable sources such as solar power. However, current commercial solar panels, based on silicon, are lacking in efficiency, only reaching between 18% and 22% efficiency.¹ In recent years, materials called perovskites have been garnering significant attention as possible replacements for silicon cells due to their favorable optoelectronic properties. …

Halide Exchange And Transport In Halide Perovskite Lattices, Temban Acha Billy

Department of Chemistry: Dissertations, Theses, and Student Research

In recent years, metal-halide perovskites (MHPs) have risen quickly to prominence as promising materials across a variety of fields, from photovoltaics to optoelectronics in general. We show here a facile solution growth for creating a variety of mixed halide MAPbBr_3-xI_x crystals, which we will use to study halide exchange and transport in halide perovskites. We generated a calibration curve between the optical response and chemical composition in mixed Br/I MHPs at room temperature. All mixed Br/I MHP crystals were subjected to measurements of photoluminescence (PL) and Raman spectroscopy. A subset of mixed-halide MHP crystals exhibited multiple emission …

Biosynthesis Of Copper Nanoparticles Using Hylocereus Costaricensis Peel Extract And Their Photocatalytic Properties, Suriati Eka Putri, Netti Herawati, Ahmad Fudhail, Diana Eka Pratiwi, Sumiati Side, Abd Rahman, Susilo Sudarman Desa, Nur Ahmad, Subaer Junaedi, A. Surleva

Karbala International Journal of Modern Science

A green chemistry method was used for the first time to synthesize copper nanoparticles (Cu-NPs) using CuSO4 as a precursor and red dragon fruit (Hylocereus costaricensis) peel wasted extract as a bio-reductor. Cu-NPs produced were then used as a photocatalysts for acid orange 7 (AO7) dyes degradation. The results showed that the smallest average crystallite size of the products ranged from 8.84 - 8.86 nm, and the FCC crystal structure had a surface area of 244.38-278.85 m2g-1. Furthermore, the optimum degradation of AO7 dye occurred at a ratio of 1:3 with a percentage of 81.07% for four cycles. These findings …

Hollow Mn3o4 Nanoparticles For Catalytic Oxidation Of Alkenes In Air, Nathan R. Loutsch

Honors Thesis

Oxidized hydrocarbons (epoxides, alcohols, carboxylic acids, ketones, and aldehydes) have many uses including fuel production, pollution treatment, and chemical synthesis. These compounds can be formed by oxidizing alkenes and alkanes with the assistance of a catalyst. Heterogeneous catalysts have greater recyclability, but traditionally have lower activity and selectivity. Due to the increased relative surface area, nanomaterials can overcome some of the physical limitations. The Hoefelmeyer lab developed a new nanomaterial: hollow Mn3O4 nanoparticles. Sensitive synthetic conditions have been optimized. Due to the increased relative number of edge and corner atoms, the reactive properties of most small nanomaterials increase. Because of …

Excitation Power Dependence Of Blinking In Copper-Indium-Sulfide Quantum Dots, Nicholas Chambers

Physics Undergraduate Honors Theses

Under continuous excitation, quantum dots exhibit random transitions between fluorescent ON states and non-fluorescent OFF states --- a phenomenon known as blinking. A physical description of the mechanism responsible for blinking that applies broadly to many types of quantum dots remains under debate. We study the blinking behavior of the non-toxic CuInS2 quantum dot, a system that has seen little investigation at the single-particle level. In particular, the optical properties of CuInS2 quantum are often improved by adding ZnS to the nanoparticles, but this addition leads to complex structural-optical property relationships that are even less understood. To probe the relationship …

Carbon Dioxide Reduction On Large Area Liquid Metal Gallium-Indium Electrocatalysts, Thomas Hollis

Chemistry & Biochemistry Undergraduate Honors Theses

Carbon dioxide (CO₂) is widely known as a greenhouse gas that contributes to global warming due to the burning of fossil fuels. The carbon dioxide reduction reaction (CO₂RR) is widely studied to reutilize CO₂ to useful products, including methane, ethane, and carbon monoxide. This project studies the use of liquid metal gallium-indium as an electrocatalyst to perform CO₂ reduction to carbon monoxide (CO) or possibly solid carbon in various solutions. Gallium-indium is characterized and studied through its “wetting” properties and adhesion to substrate foil through the measurement of contact angles inside solution. These liquid …

Designing Noncentrosymmetric Multifunctional Materials, Ebube Oyeka

All Dissertations

Noncentrosymmetric (NCS) materials with crystal lattices lacking spatial inversion symmetry display a wide range of exciting functionalities. This dissertation covers two classes of functional NCS materials: magnetic skyrmion-host compounds and multifunctional materials. Magnetic skyrmion and multifunctional materials combining optical and magnetic responses are providing avenues for developing and optimizing the performance of electronic devices that can have uses in memory storage, laser technology, medicine, sensors, etc. The formation of skyrmions is driven by asymmetric Dzyaloshinskii–Moriya (DM) interaction facilitated by broken spatial inversion symmetry and large spin-orbit coupling (SOC), while multiple functionalities arise when spin carriers and optical chromophores are optimally …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Structural, Magnetic, Electrical, Pseudocapacitive, And Electrocatalytic Properties Of Bilayered Ruddlesden-Popper Oxides., Chandana Kananke-Gamage

Electronic Theses and Dissertations

Ruddlesden Popper (RP) oxides are perovskite-derived functional materials with the general formula An-1Aʹ2BnO3n+1, where A/Aʹ is often a lanthanide or alkaline earth metal, and B is usually a transition metal. These materials contain perovskite-like connectivity, where BO6 units share apexes to form layers that are stacked above each other. The number of layers in each stack is represented by n in the above formula. The spaces between stacks are often occupied by lanthanide or alkaline-earth metals (Aʹ-site metals), which also reside in intra-stack spaces (A-site) between the octahedra. Oxide materials derived from perovskites have been studied for a wide range …

Chemically Responsive Hydrogels, Properties, Pharmaceuticals, And Agricultural Applications: A Review, Mohammad Alrbaihat, Qusay Abu-Afifeh, Firas Al-Zeidaneen

Al-Bahir

A review of the literature on chemically responsive hydrogels about the selection of selectivity based on classification, properties, and application is presented in this article. Chemically responsive hydrogels are a type of hydrogel that undergo changes in their properties in response to specific stimuli. These hydrogels have attracted significant attention due to their potential applications in various fields, including pharmaceuticals and agriculture. Chemically crosslinked hydrogels are synthesized by covalent crosslinking of end-functionalized macromeres. Currently, a great deal of research is being conducted on hydrogel networks, also known as smart networks or hungry networks. This is owing to their potential use …

Influence Of Synthesis Conditions On The Physicochemical And Electrocatalytic Properties Of Non-Stoichiometric Ba2sr2la2ti4o12 Perovskites, Ofeliya Kostadinova, Iliyan Popov, Simeon M. Stankov, Hristo Kolev, Tamara Petkov

Karbala International Journal of Modern Science

Present work studies the influence of the pretreatment milling media (deionized water (BLTOS-H) and isopropanol (BLTOS-i)) on the surface characteristics, structure, chemical composition and catalytic activity of non-stoichiometric Ba2Sr2La2Ti4O12 perovskites. The IR spectroscopy and XRD analyses shows a difference in the structure and phase composition of the two materials. X-ray photoelectron spectroscopy detects a Ba2+- and La3+-enriched and Sr2+-depleted surface. The BLTOS-i sample appears to exhibit higher specific surface area (SSA) and pore volume in comparison to BLTOS-H. The electrochemical tests showed that BLTOS-H sample have similar behavior to platinum at current densi-ties up to 10 mA cm-2, while BLTOS-i …

Synthesis Of A Novel Terbium(Iii) Complex For Application In Metal Nanoparticle Surface Modification, Lauralee E. Hurst, Davon Ferrara, Justin Stace

Science University Research Symposium (SURS)

Lanthanide ions, such as terbium(III), exhibit bright luminescence when bound to organic ligands which strongly absorb light. This property has been used in creating chemical sensors or luminescent tags for microscopy. Complexes centered with terbium(III) exhibit a yellow-green luminescence upon excitation by shortwave ultraviolet light. In this work, a bifunctional ligand, 4-mercaptobenzoic acid (4mba), was chosen to selectively coordinate terbium(III) to the oxygens of the acid functional group, leaving the thiol group available for another compound. Thiol groups are effectively used in surface coordination to noble metal nanoparticles (NP). In efforts to create a novel 4mba-terbium(III)-NP system, a one pot …

Exploration And Synthesis Of Half-Heusler And Disordered Ternary Intermetallic Single Crystals, Md Fahel Bin Noor

Graduate Theses/Dissertations

Due to their distinct physical and chemical characteristics, half-Heusler compounds are intermetallic materials that have undergone substantial research. The general formula for these compounds is XYZ, where X and Y are transition metals and Z is a p-block element. Thermoelectricity is among the half-Heusler compounds' most exciting potential uses, but additional possible applications include spintronics, magnetic refrigeration, and superconductivity, among others. Recently, half-Heuslers (and Heuslers) have emerged as candidates for catalysts for hydrogenation. The CoNbSn half-Heusler compound, as well as another unique intermetallic ternary compound, the disordered Mn_4-xCr_xAl₁₁, were successfully grown as single crystals …

Computational Investigation Of The Ionization Potential Of Lead Sulfide Quantum Dots, Jessica Beyer

Scripps Senior Theses

The purpose of this work was to determine the impact of quantum dot size on ionization potential and to determine how the presence of carbonyl-based ligands affect the ionization potential of lead sulfide quantum dot systems. Ionization potential (IP) is defined as the energy required to remove an electron from an atom, molecule, or material. IP helps scientists determine how reactive the material of interest is, which is crucial information when manufacturing nanomaterials. Accurate quantum chemical calculations of ionization potential are challenging due to the computational cost associated with the numerical solution of the Dyson equation. In this work, the …

Functionalizing Metal-Organic Super-Containers (Moscs) For Selective Anion Recognition, Hanying Li

Dissertations and Theses

Anions are ubiquitous in Nature and play critical roles in both chemistry and biology. Biologically important molecules like enzymes, DNA, and ATP (adenosine triphosphate) are either anionic or contain negatively charged regions. Inorganic anions such as Cl- and HCO3- play essential roles in various physiological, environmental, and technological processes. Compared to cations, anions have larger ionic radii and more diffuse charge distribution, resulting in weaker electrostatic interactions. Developing synthetic receptors for controlled anion recognition is vital but poses significant challenges. Recent decades have shown remarkable progress in anion recognition, yielding diverse synthetic receptors with promising binding abilities. However, traditional approaches …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Water-Soluble Palladium, Copper, And Nickel Catalysts And Their Formation In Ligand-Free Suzuki-Miyaura Cross-Coupling Reactions, Priya Karna

Theses and Dissertations--Chemistry

Transition-metal catalyzed Suzuki-Miyaura (SM) cross coupling is a powerful synthetic method for constructing carbon-carbon and carbon-heteroatom bonds in designing organic compounds, agrochemicals, pharmaceuticals, and precursors for materials. However, the nature of catalysis and identity of the transition metal catalysts used in these reactions remain under debate or unknown. This dissertation reports the studies of three metals: Pd, Cu, and Ni. Pd-nanocluster catalysts and their formation in ligand-free SM reactions with Pd(II) nitrate as a precatalyst was investigated. The catalysts are water-soluble neutral Pd tetramer and trimer in their singlet electronic states as identified by UV-Vis absorption spectroscopy and are formed …

Development Of An Effective Au:Pd Bimetallic Heterogeneous Catalyst For Oxidative Lignin Depolymerization To Low Molecular Weight Aromatics, Gayan P. Karunasinghe

Theses and Dissertations--Chemistry

The principal concept behind biorefining involves the transformation of lignocellulosic biomass into valuable products and energy resources. Historically, biorefinery strategies for lignocellulosic biomass have primarily focused on improving the conversion of cellulose into ethanol, often neglecting the underutilized lignin component. Lignin consists of phenolic subunits, from which it follows that value-added products can be obtained from lignin depolymerization. Unfortunately, lignin utilization is particularly challenging due to its high structural irregularity and recalcitrance. The goal of this study was to develop an AuPd/Li-Al layered double hydroxide (LDH) bimetallic catalyst for efficient lignin depolymerization, resulting in the production of high-value aromatic compounds. …

Synthesis And Physicochemical Characterization Of Noncentrosymmetric Quaternary Sulfides With Potential Nonlinear Optical Applications, Andrew J. Craig

Electronic Theses and Dissertations

In this work, several new quaternary sulfides were synthesized and investigated for their potential applications in optics. Chapter 1 provides an overview of nonlinear optical (NLO) materials in general, including their applications, ideal characteristics, current deficiencies, and strategies for the discovery of new candidate NLO materials, particularly those for use in the infrared (IR). Two families of compounds are investigated in this work, including Ln₃LiTS₇ (3-1-1-7) compounds and I₄-II-IV₂-VI₇ (4-1-2-7) diamond-like semiconductors (DLSs). All products were synthesized via traditional high-temperature, solid-state synthesis and their structures were solved and refined through single crystal …

Competition Between Halogen And Chalcogen Bonding And Their Role In Probing Organic Transformations, Andrew Peloquin

All Dissertations

Halogen bonding, the attractive interaction of an electrophilic region on a halogen atom with a nucleophilic region on another atom or molecule, provides a highly directional tool in forming solid-state motifs. This interaction, along with the related chalcogen bonding interactions, forms powerful synthons, which, when combined with other typical intermolecular attractions such as hydrogen bonding, allow for the design of supramolecular structures and inputs to crystal engineering. This dissertation research serves two primary purposes: (1) to catalog halogen and chalcogen bonding interactions with various donor molecules and (2) to utilize these interactions to probe interesting organic transformations.

In order to …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.

Light Harvesting And Electrically Conducting Metal-Organic Frameworks, Monica Gordillo Varela

All Dissertations

Composed of metal clusters nodes and organic linkers, metal-organic frameworks (MOFs) have emerged as versatile platforms with unparalleled chemical and structural tunability, synthetic facility, permanent porosity, and size-selective guest encapsulation capability. These features make them potential candidates for a variety of applications such as gas storage,drug delivery, catalysis,and sensing. In recent years, the introduction of redox- and photoactive components have yielded stimuli-responsive electronic and photonic MOFs and expanded their utility in molecular electronics and energy storage devices/technologies.

Chapter one describes the light-harvesting ability of a porphyrin-based MOF. Herein, we have demonstrated spontaneous solvothermal growth of [100]-oriented uniform pillared-porphyrin framework-11 (PPF-11) …