Inorganic Chemistry Commons^™

Synthesis And Characterization Of Organic-Inorganic Hybrid Materials For Thermoelectric Devices, Paige M. Huzyak

Masters Theses & Specialist Projects

The development of organic-inorganic hybrid materials is of great interest in thermoelectrics for its potential to combine the desirable characteristics of both classes of materials. Thermoelectric materials must combine low thermal conductivity with high electrical conductivity, but in most materials, thermal and electrical conductivity are closely related and positively correlated. By combining the low thermal conductivity, flexibility, facile processing, and low cost of organic components with the high electrical conductivity and stability of inorganic components, materials with beneficial thermoelectric properties may be realized.

Here, we describe the synthesis and characterization of anthracene-containing organic-inorganic hybrid materials for thermoelectric purposes. Specifically, POSS-ANT …

Ultrafast Spectroscopy And Energy Transfer In An Organic/Inorganic Composite Of Zinc Oxide And Graphite Oxide, Jeff A. Secor

Dissertations, Theses, and Capstone Projects

The energy transfers and nature of defect levels of an organic/inorganic composite of Zinc Oxide and Graphite are studied with multidimensional spectroscopy. The edge and surface states of each composite are uncovered using excitation emission experiments showing which defect states are mediating the energy transfer from the metal oxide to the graphite oxide. Multidimensional time resolved spectroscopy further describes the effect of the carbon phase on the energy transfer pathways in the material.

The Dawn Of New Quantum Dots: Synthesis And Characterization Of Ge1-Xsnx Nanocrystals For Tunable Bandgaps., Richard J. Esteves

Theses and Dissertations

Ge_1-xSn_x alloys are among a small class of benign semiconductors with composition tunable bandgaps in the near-infrared spectrum. As the amount of Sn is increased the band energy decreases and a transition from indirect to direct band structure occurs. Hence, they are prime candidates for fabrication of Si-compatible electronic and photonic devices, field effect transistors, and novel charge storage device applications. Success has been achieved with the growth of Ge_1-xSn_x thin film alloys with Sn compositions up to 34%. However, the synthesis of nanocrystalline alloys has proven difficult due to larger discrepancies (~14%) in …

Non-Conventional Approaches To Syntheses Of Ferromagnetic Nanomaterials, Dustin M. Clifford

Theses and Dissertations

The work of this dissertation is centered on two non-conventional synthetic approaches to ferromagnetic nanomaterials: high-throughput experimentation (HTE) (polyol process) and continuous flow (CF) synthesis (aqueous reduction and the polyol process). HTE was performed to investigate phase control between Fe_xCo_1-x and Co_3-xFe_xO_y. Exploration of synthesis limitations based on magnetic properties was achieved by reproducing M_s=210 emu/g. Morphological control of Fe_xCo_1-x alloy was achieved by formation of linear chains using an H_ext. The final study of the Fe_xCo_1-x chains used DoE to …

Sol-Gel Assembly Of Metal Nanostructures Into Metallic Gel Frameworks And Their Applications, Xiaonan Gao

Theses and Dissertations

The advent of nanoscience and nanotechnology has sparked many research forefronts in the creation of materials with control over size, shape, composition, and surface properties.^1,2 However, for most of the applications, nanoscale materials need to be assembled into functional nanostructures that exhibit useful and controllable physical properties. Therefore, numerous efforts on the assembly of nanoparticles (NPs) using organic ligands, polymers and polyelectrolytes have been reported.^3,4 However, the interactions between NPs are mediated by intervening ligands, which are detrimental to charge transport and limit the thermal stability. Hence, developing a new method to produce solid …

The Optimization Of The Synthesis And Characterization Of Vapor-Liquid-Solid Grown Zno Nanowires, Silas R. Fiefhaus

Theses and Dissertations--Chemistry

ZnO nanowires are a promising material with great semiconductor properties. ZnO nanowires were prepared by carbothermal reduction and vapor-liquid-solid growth mechanism. Altering a variety of parameters ranging from mole to mole ratio of ZnO to C all the way to gas flow rate was examined. The nanowires were then characterized and their morphology examined under a SEM to observe what effect the parameter had on the morphology of the nanowires. From the experiments and the parameters tested it was observed that in order to produce the highest quality straight nanowires one should use a mole to mole ratio of ZnO …

Organometallic Materials: Ferroceno[C]Thiophenes And 1,2-Bisthienylmetallocenes, Surya R. Banks

Theses and Dissertations--Chemistry

Development of synthetic routes toward two general organometallic frameworks was undertaken. The first project involved synthetic attempts of substituted and unsubstituted ferroceno[c]thiophene while the second one was the synthesis of 1,2-dithienylmetallocenes. The long-term goal of this work is to lay the foundations for study of electronic, electrochromic, redox, and optical properties of thiophene-based materials integrated with organometallic systems such as ferrocene, ruthenocene and cymantrene. The synthetic pathway for the target molecule in the first project involved converting 1,2-bis(hydroxymethyl)ferrocene to 1,2-bis(thiouroniummethyl)ferrocene with thiourea under acidic conditions. Refluxing the salt in base followed by acidification resulted in 1,2-bis(mercaptomethyl)ferrocene, which is …

Using Conventional And In Situ Transmission Electron Microscopy Techniques To Understand Nanoscale Crystallography, Bethany M. Hudak

Theses and Dissertations--Chemistry

Transmission electron microscopy (TEM) is a powerful tool for studying solidstate crystalline systems. With the advances in aberration correction, monochromation, and in situ capabilities, these microscopes are now more useful for addressing fundamental materials chemistry problems than ever before. This dissertation will illustrate the ways in which I have been using high-resolution imaging and in situ heating in the TEM during my Ph.D. research to investigate unique solid state chemistry questions.

This dissertation will focus on four unique crystal systems: thermoelectric skutterudite crystals, vapor-liquid-solid (VLS) grown nanowires, and hafnium dioxide nanorods. Although these systems are very different from one another, …

Fabrication Of Multifunctional Nanostructured Porous Materials, Ahmed A. Farghaly

Theses and Dissertations

Nanostructured porous materials generally, and nanoporous noble metals specifically, have received considerable attention due to their superior chemical and physical properties over nanoparticles and bulk counterparts. This dissertation work aims to develop well-established strategies for the preparation of multifunctional nanostructured porous materials based on the combination of inorganic-chemistry, organic-chemistry and electrochemistry. The preparation strategies involved one or more of the following processes: sol-gel synthesis, co-electrodeposition, metal ions reduction, electropolymerization and dealloying or chemical etching. The study did not stop at the preparation limits but extended to investigate the reaction mechanism behind the formation of these multifunctional nanoporous structures in order …

Hybrid Sol–Gel Glasses With Glass-Transition Temperatures Below Room Temperature, Andrei Jitianu, Guadalupe Gonzalez, Lisa C. Klein

Publications and Research

Melting gels are hybrid gels that have the ability to soften and flow at around 100 ° C for some combinations of mono- and di-substituted alkoxysiloxanes, where substitutions are either all aromatic or all aliphatic. In this study, melting gels were prepared using phenyltriethoxysilane (PhTES) and dimethyldiethoxysilane (DMDES), meaning both an aromatic and aliphatic substitution. Differential scanning calorimetry was performed to identify glass-transition temperatures, and thermal gravimetric analysis coupled with differential thermal analysis (TGA-DTA) was performed to measure weight loss. The glass-transition temperatures ( T g ) ranged from – 61 ° C to + 5.6 ° C, which are …

Fluorinated Metallo Phthalocyanines For Chemical And Biological Catalysis, Hemantbhai H. Patel

Seton Hall University Dissertations and Theses (ETDs)

The rational design of robust oxidation catalysts based on organic molecules is hindered by the presence of labile C-H bonds. We have shown recently that replacing all C-H bonds by a combination of fluoro- and perfluoro-groups in a bioinspired Cytochrome P450 model based on a phthalocyanine, Pc, scaffold results in a stable yet reactive oxidation catalyst. The Pc cobalt complex catalyzes, for example, the aerobic oxidation of thiols to disulfides, a reaction of both biological significance and industrial importance.

The presence of robust C-F bonds, however, renders the catalyst unsuitable for attachment to solid-state supports, except via van der Waals …

Hexaniobate Nanopeapods: In Situ Deposition Of Magnetic-Noble Metal Nanoparticles Inside Preformed Nanoscrolls, Sarah P. Gauthier

LSU New Orleans Theses and Dissertations

An in situ deposition procedure was developed for the nanopeapod (NPP) formation of NiAu nanoparticles inside preformed acid-exchanged hexaniobate nanoscrolls (HNB). Metal salt precursors of Ni(acac)₂ and HAuCl₄∙3H₂O were reduced in solution under mild synthetic conditions in the presence of the preformed acid-exchanged hexaniobate nanoscrolls. Two of the surfactants used for the formation of the nanoparticles were oleylamine and triphenylphosphine oxide (TTPO). Reaction conditions were studied and modified to produce well-defined NiAu@HNB NPP systems, with monodispersed particles evenly filling and orienting within the nanoscrolls. The synthetic parameters studied were both time and temperature, with the …

Synthesis And Flammability Testing Of Epoxy Functionalized Phosphorous-Based Flame Retardants, Vladimir Benin, Xuemei Cui, Alexander Morgan, Karl Seiwert

Chemistry Faculty Publications

Several potential new phosphorus-containing flame retardant molecules were evaluated for heat release reduction potential by incorporation of the molecules into a polyurethane, generated from methylene diphenyl diisocyanate and 1,3-propane diol. The heat release reduction potential of these substances was evaluated using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods to qualitatively evaluate their potential reactivity into the polyurethane prior to heat release testing. The functionality of the flame retardants was epoxide based that would potentially react with the diol during polyurethane synthesis. Flammability testing …

Dft Analysis Into The Intermediates Of Nickel Pyridenthiolate Catalysed Proton Reduction, Carolyn N. Virca, Theresa M. Mccormick

Chemistry Faculty Publications and Presentations

Nickel pyridine 2-thiolate (Ni(PyS)₃ −) has shown good stability and activity as a H₂ generation catalyst for use in solar energy storage. The experimentally proposed catalytic pathway is explored using DFT calculations. Free energy changes along the reaction coordinate, spin states, localization of charge and geometry of the intermediates were explored. Calculations were performed using Gaussian 09 with a B3P86/ 6-31+G(d) basis set and a CPCM water solvation model. Of particular interest were our findings that the first reduction occurs at the nickel rather than through non-innocent ligands and that water coordination is not favourable although protonation of …

The Quantum Efficiency Of Cdse Semiconducting Nanocrystals, Charles Bledsoe

Undergraduate Theses

CdSe molecules are semiconducting nanocrystals that absorb visible light and emit broad wavelengths of light in response. They utilize electromagnetic radiation not only for emitting broad wavelengths of visible light, but for fluorescence, conducting electricity, and vibrational relaxation. The Thermal Lensing technique (TL) can be used to study the lifetimes of the excited state transitions and the various nonradiative processes molecules can undergo in order to better understand the excited state dynamics of semiconducting nanocrystals, and in turn, better understand how these molecules may be applied in solar cells, lasers, and fluorescence labeling. Using known methods, four samples of CdSe …

Corrosion Protection Of 304 Stainless Steel With Melting Gels Coatings, Mario Aparicio, Andrei Jitianu, Gabriela Rodriguez, Ahmad Dengah, Kutaiba Marzoki, Jadra Mosa, Lisa C. Klein

Publications and Research

Methyl-substituted melting gels were used to coat AISI 304 stainless steel substrates. Crack-free coatings up to 1 mm in thickness were obtained. SEM micrographs of cross-sections con fi rm good adhesion to the surface. Samples were subjected to structural characterization using FT-IR, and Raman spectroscopy. Mechanical properties were investigated by micro-scratch tests. Electrochemical analyses (anodic polarization and electrochemical impedance spectroscopy) were performed in 3.5% NaCl solutions. Electrochemical tests show excellent performance of the coatings against corrosion with no sign of degradation after several months of immersion.

New Dion-Jacobson And Ruddlesden- Popper Layered Perovskites Prepared By Topochemical Methods, Dariush Montasserasadi

LSU New Orleans Theses and Dissertations

Layered perovskites can be classified in three major groups: Dion-Jacobson AA′_n-1B_nO_3n+1, Ruddlesden-Popper A₂A′_n-1B_nO_3n+1,and Aurivillius phase (Bi₂O₂)A′_n-1B_nO_3n+1. (A: Alkali metal, Alkali-earth metal; A′: Lanthanides and Bi; B: Ti, Nb, Ta; n: thickness of slabs). For more than two decades researchers have shown much interest in this series because of their magnetic and electrical properties. Tuning synthesis parameters such as temperature, time, and host structure can be used to direct such properties. Low temperature synthetic methods (topochemical methods) allow …

Study Of Mechanical Properties Of Pva Fiber-Reinforced Concrete With Raman Spectroscopic Analysis, Ramyasree Annam

Masters Theses & Specialist Projects

The brittleness of concrete has always been a safety and economic issue of great concern. The low tensile strength of concrete is the cause of its intrinsic brittle nature. This is critical considering the amount of concrete used for the construction of highways, buildings, and other facilities. The mechanical properties of concrete must be improved to provide upgraded construction. Crack resistant and durable concrete has always been a major goal for engineers. Many approaches have been tried to make concrete a better construction material. Fiber reinforcement is an approach which has been shown to improve the quality and durability of …

Green Chemistry As A Tool For Understanding The Toxic Substances Control Act: A Lecture Module For Undergraduate Students, Molly R. Blessing

Honors Scholar Theses

The Toxic Substances Control Act (TSCA) is the central form of chemical regulation existent in the United States today, yet scientists are often unaware or uncertain of its provisions. Violations of TSCA by unknowing chemists set industry and government unnecessarily at odds. A lecture on TSCA was developed for undergraduate students that uses the concept of green chemistry to promote interest and incentivize learning. Green chemistry methods are cleaner and less wasteful than traditional chemical ones, and many companies using them are at the forefront of technological innovation. The lecture explains both green chemistry and TSCA, includes company case studies, …

Synthesis, Characterization, And Catalytic Applications Of Porous Transition-Metal Oxide Systems For The Conversion Of Biomass, Anton Gudz

Honors Scholar Theses

The development of innovative strategies and environmentally-friendly resources for the sustainable production of fuels and chemicals from renewable materials has recently received much interest in the scientific world. Among such resources, biomass has enormous potential as a raw material for generation of green fine chemicals to replace the petroleum feedstocks currently in place. Biomass derived carbohydrates can be converted into such valuable platform chemicals as levulinates, 5-hydroxymethyl furfural (HMF), and lactates. In order to catalyze the biomass conversion process, porous transition-metal oxide catalytic systems have been developed in this study. High catalytic activities and potential for reusability of such systems …

Synthesis, Surface Functionalization, And Biological Testing Of Iron Oxide Nanoparticles For Development As A Cancer Therapeutic, Stanley E. Gilliland Iii

Theses and Dissertations

Iron oxide nanoparticles are highly researched for their use in biomedical applications such as drug delivery, diagnosis, and therapy. The inherent biodegradable and biocompatible nanoparticle properties make them highly advantageous in nanomedicine. The magnetic properties of iron oxide nanoparticles make them promising candidates for magnetic fluid hyperthermia applications. Designing an efficient iron oxide nanoparticle for hyperthermia requires synthetic, surface functionalization, stability, and biological investigations. This research focused on the following three areas: optimizing synthesis conditions for maximum radiofrequency induced magnetic hyperthermia, designing a simple and modifiable surface functionalization method for specific or broad biological stability, and in vitro and in …

Ferrocene-Fused Derivatives Of Acenes, Tropones And Thiepins, Bidhya L. Maharjan

Theses and Dissertations--Chemistry

This research project is concentrated on tuning the properties of small organic molecules, namely polyacenes, tropones and thiepins, by incorporating redox-active transition metal centers π-bonded to terminal cyclopentadienyl ligands. Organometallic-fused acenequinones, tropones, thiepins and cyclopentadiene-capped polyacenes were synthesized and characterized. This work was divided into three parts: first, the synthesis of ferrocene-fused acenequinones, cyclopentadiene-capped acenequinones and their subsequent aromatization to polyacenes; second, the synthesis of ferrocene-fused tropones, thiotropones and tropone oxime; and third, the synthesis of ferrocene-fused thiepins. Ferrocene-fused quinones are the precursors to our target complexes. Our synthetic route to ferrocenequinones involved two-fold aldol condensation between 1,2-diformylferrocene and naphthalene-1,4-diol …

Colloidal Synthesis And Optical Characterizations Of Semiconductor Nanocrystals From Nontoxic Elements, Minh Q. Ho

Theses and Dissertations

To date, the search efforts have shifted from the toxic II-VI, III-V and IV-VI semiconductors to more environmentally friendly materials. Among Group II-V semiconductors, Zn₃P₂ has shown to be a more benign option, similar to Group IV (Ge, Si) materials, for future applications in photovoltaics and optoelectronics. This work is dedicated to the development of wet-chemical synthetic routes of (1) Zn₃P₂ and (2) Group IV (Ge, Si, Si_1-xGe_x) nanocrystals with precise control over composition, crystal structure, size and dispersity by adjusting different reaction parameters such as temperature, time and solvent …

Heat Release Of Polyurethanes Containing Potential Flame Retardants Based On Boron And Phosphorus Chemistries, Vladimir Benin, Bastien Gardelle, Alexander Morgan

Chemistry Faculty Publications

Using a polyurethane of methylene diphenyl isocyanate and 1,3-propane diol, several new non-halogenated aromatic boron and phosphorus flame retardants were evaluated for heat release reduction potential using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods, and were then analyzed via spectroscopic methods to determine if the flame retardant was still present in the final product. PCFC testing on the resulting products showed that the flame retardant molecule can have different effects on heat release depending upon how it is mixed into the polyurethane. Some …

Determination Of Corrosion Inhibitor Lubricity Improver In Jet Fuel By Liquid Chromatography-Electrospray Ionization Mass Spectrometry, David W. Johnson, Milissa Flake, Ryan Adams

Chemistry Faculty Publications

Military jet fuel (JP-8) is very similar to commercial jet fuel (Jet A) except for the presence of three additives, fuel system icing inhibitor, corrosion inhibitor–lubricity improver (CI-LI), and antistatic additive, which are added to improve characteristics of JP-8. Of particular interest is the CI-LI additive; the most common active ingredient is a dimer of linoleic acid. This article focuses on quantification of the active ingredient in the CI-LI additive by liquid chromatography–mass spectrometry (LC–MS). This method will allow the determination of CI-LI content in military jet fuel samples.

Science Classics, Mark Masthay

Chemistry Faculty Publications

An essay on the impact of the works in the Imprints and Impressions: Milestones in Human Progress, an exhibition of rare books from the collection of Stuart Rose. Exhibition was held Sept. 29-Nov. 9, 2014, at the University of Dayton.

Modified Seed Growth Of Iron Oxide Nanoparticles In Benzyl Alcohol: Magnetic Nanoparticles For Radio Frequency Hyperthermia Treatment Of Cancer, Stanley E. Gilliland Iii

Theses and Dissertations

Iron oxide nanoparticles have received sustained interest for biomedical applications as synthetic approaches are continually developed for precise control of nanoparticle properties. This thesis presents an investigation of parameters in the benzyl alcohol synthesis of iron oxide nanoparticles. A modified seed growth method was designed for obtaining optimal nanoparticle properties for magnetic fluid hyperthermia. With a one or two addition process, iron oxide nanoparticles were produced with crystallite sizes ranging from 5-20 nm using only benzyl alcohol and iron precursor. The effects of reaction environment, temperature, concentration, and modified seed growth parameters were investigated to obtain precise control over properties …

High Yield Solvothermal Synthesis Of Hexaniobate Based Nanocomposites Via The Capture Of Preformed Nanoparticles In Scrolled Nanosheets, Shivaprasad Reddy Adireddy

LSU New Orleans Theses and Dissertations

The ability to encapsulate linear nanoparticle (NP) chains in scrolled nanosheets is an important advance in the formation of nanocomposites.These nanopeapods (NPPs) exhibit interesting properties that may not be achieved by individual entities. Consequently, to fully exploit the potential of NPPs, the fabrication of NPPs must focus on producing composites with unique combinations of morphologically uniform nanomaterials. Various methods can produce NPPs, but expanding these methods to a wide variety of material combinations can be difficult. Recent work in our group has resulted in the in situ formation of peapod-like structures based on chains of cobalt NPs. Building on this …

Synthesis And Structures Of New Three-Dimensional Copper Metal-Organic Frameworks, Nitin Kumar Pally

Masters Theses & Specialist Projects

Metal-organic frameworks (MOFs) are crystalline materials with metal ions covalently bonded to organic ligands. The ligands act as spacers often creating a porous structure with very high pore volume and surface area. MOFs are known for their robust structures, high porosity, and different chemical functionalities and are considered for applications in adsorptions, separations, catalysis and gas storage. This work focuses on the synthesis of new MOFs using copper compounds. Different types of carboxylate ligands were used for the synthesis. Two new copper-organic frameworks, [Cu₃(pyz)(btc)] (1), and [(Cu₃(btc))•xH₂O] (2) (btc= benzene-1,3,5-tricarboxylate, pyz= pyrazine) have been …

Phosphate Esters, Thiophosphate Esters And Metal Thiophosphates As Lubricant Additives, David W. Johnson, John E. Hils

Chemistry Faculty Publications

Phosphate esters, thiophosphate esters and metal thiophosphates have been used as lubricant additives for over 50 years. While their use has been extensive, a detailed knowledge of how they work has been a much more recent development. In this paper, the use of phosphate esters and thiophosphate esters as anti-wear or extreme pressure additives is reviewed with an emphasis on their mechanism of action. The review includes the use of alkyl phosphates, triaryl phosphates and metal containing thiophosphate esters. The mechanisms of these materials interacting with a range of iron and steel based bearing material are examined.