Inorganic Chemistry Commons^™

Synthesis Of Metal Oxide Surface And Interface Arrays By A Combined Solid-Liquid- Vapor/Vapor-Liquid-Solid Approach, Alexandra J. Riddle

Theses and Dissertations--Chemistry

This project was motivated by an in situ heating experiment in the transmission electron microscope (TEM) in which gold (Au) nanoparticles were observed to dissolve tin dioxide (SnO2) nanowires (NWs) under vacuum. The explanation for this observation was that the high-temperature and low-pressure environment of the TEM caused the reverse reaction of the well-known vapor-liquid-solid (VLS) method commonly used to grow NWs. In the VLS process, a metal catalyst absorbs reactant vapor until it becomes supersaturated. The precipitation of the NW occurs at the liquid-solid interface, which ceases when there is no longer reactant vapor, and the diameter of the …

Designing Metal-Halide Perovskites With Enhanced Optical Properties And Stability Using Surface Ligands, Md Aslam Uddin

Theses and Dissertations--Chemistry

Metal-halide perovskites (MHPs), with formula ABX₃ (A = methylammonium, formamidinium, or Cs⁺; B = Sn²⁺ or Pb²⁺; and X = Cl^-, Br^-, or I^-) are versatile and attractive materials because of their tunable optical and electronic properties. These optical and electronic properties include tunable direct band gaps, high absorption coefficients, low exciton binding energies, relatively high electron and hole mobilities, narrow emission line-widths, and high photoluminescence (PL) quantum yields (Φ_PL). Much of the initial excitement around organic metal-halide perovskites focused on their application in photovoltaics (PVs) …

Identification Of Adsorbate Ft-Ir Bands Using In-Situ Techniques: Pd Speciation And Adsorption Chemistry Of Pd-Zeolites For Passive Nox Adsorption, Robert Bruce Pace Iii

Theses and Dissertations--Chemistry

To meet increasingly stringent automotive emissions standards, further improvements in catalytic converter design are necessary. Current automotive catalyst systems are effective at eliminating emission of nitrogen oxides (NO_x) once the catalyst reaches operational temperature (~200 °C). NO_x emitted at lower catalyst temperatures now comprises most of the NO_x released during a typical test cycle. Referred to as “the cold start problem” this issue has come to the forefront of automotive catalyst development, as mitigating these emissions is necessary to further reduce automotive emissions. Passive NO_x adsorbers present an appealing solution to the cold start problem, …

Electrocatalytic Cathodes For Advanced Lithium–Sulfur Batteries, Ahmed Abdelkader

Theses and Dissertations

Energy demands are anticipated to increase in the next decades with the consumption of fossil fuels predicted to grow from the current levels. This will place an enormous burden on the non–renewable reserves of our energy sources and add to the preexisting environmental crisis with the emission of greenhouse gases like carbon dioxide (CO₂). Electrical energy storage (EES) is considered one of the most crucial needs of modern society to circumvent this crisis and potential applications include electric vehicles and devices, as well as storage systems for solar and wind sources.Lithium–ion batteries (LIBs) have proven to be …

Synthesis Of Supported Metal Nanoparticles On High Surface Area Supports For Application In Energy Conversion And Heterogeneous Catalysis, Nazgol Norouzi

Theses and Dissertations

Precise control of metal nanoparticles’ size, composition, and dispersity over high surface area supports are highly desirable to address current challenges in energy storage and conversion as well as catalytic processes involving precious metals. Therefore, developing viable synthetic routes that enable new catalytic systems derived from inexpensive transition metals or limited use of precious metals is vital for clean energy applications such as fuel cells and rechargeable batteries or affordable drugs in the pharmaceuticals arena. In addition to metal components of heterogeneous catalysts, the catalyst support is an integral part of catalyst design as it can impart both physical stability …

Structure, Morphology And Composition-Property Elucidation Of Ni–Mo And Ni−Mo−P Nanocrystals For Water Splitting Reactions And Group Iv Alloy And Silicate Nanocrystals For Visible To Near Ir Optoelectronics, Ebtesam Hassan Abuelenein Eladgham

Theses and Dissertations

Abstract

Structure, Morphology and Composition-Property Elucidation of Ni–Mo and Ni−Mo−P Nanocrystals for Water Splitting Reactions and Group IV Alloy and Silicate Nanocrystals for Visible to Near IR Optoelectronics

by

Ebtesam Hassan Abuelenein Eladgham

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Advisor: Indika U Arachchige

Associate Professor, Department of Chemistry

Nanomaterials have gained a great attention because of their unique physical properties with size intermediate between molecular materials and extended solids. They have a large surface to volume ratio and display size tunable physical properties that was not …

Hypervalent Iodine Compounds With Carboxylate And Tetrazolate Ligands, Avichal Vaish

Chemistry Theses and Dissertations

In modern organic chemistry, hypervalent (HV) iodine(III) compounds are frequently used as oxidizing agents but application of λ³-iodanes in polymer and material chemistry is still underexplored. This dissertation describes the preparation of dynamic and self-healing materials by employing ligand exchange reactions involving HV iodine(III) compounds of the type ArIL₂ (Ar = Aryl, L = ligand, e.g., carboxylate or (pseudo)halide). These compounds can undergo ligand exchange reactions in presence of nucleophiles (Nu^-) to form ArINu₂. Diacetoxyiodo benzene was successfully employed as a crosslinker to prepare dynamic and self-healing gels derived from carboxylate-containing polymers. Furthermore, …

Synthesis And Characterization Of Multifunctional Transition Metal Oxide Nanoparticles Through A Modified Sol-Gel Method With Application In Energy Storage, Julien Lombardi

Dissertations, Theses, and Capstone Projects

The Synthesis of transition metal oxide nanoparticles has been studied in great detail over the many years. The most studied transition metal oxide nanoparticles are perovskites of the ABO₃ stoichiometry (A and B = transition metal) and more recently double perovskite crystal structures of the AA’BO₆ or A₂BB’O₆ stoichiometry due to the many different properties arising from the many different combinations of elements possible. These materials have proven potentially useful in many fields, but due to properties such as ferroelectricity and ferromagnetism, the desire to integrate these materials into electronics is ever growing. Many synthesis …

Organic-Inorganic Hybrid Composites: Superhydrophobic Polymer Coatings With Photoreactive Perfluorinated Phthalocyanines, Abdul Azeez

Seton Hall University Dissertations and Theses (ETDs)

ABSTRACT

We report partly fluorinated and silicon-based polymers that incorporate inorganic/organic materials capable of generating reactive oxygen species (ROS) using only visible light and air. Polyvinylidene fluoride (PVDF), which incorporated a known perfluorinated phthalocyanine photosensitizer, F₆₄PcZn, supported on silicon and titanium oxides was further modified via chemical surface roughening to exhibit enhanced hydrophobicity when used as a coating. Water contact angles as high as ~159° have been observed, vs. ~ 92° for the unmodified polymer. The polymer matrix, however, does not resist the ROS it produces as evidenced by spectroscopic and SEM data. A polysiloxane matrix was similarly …

An In-Situ Study Of The Aqueous Speciation Of Uranium (Vi) Under Hydrothermal Conditions, Diwash Dhakal

Graduate Theses/Dissertations

Rigorous study of the speciation distribution of uranyl-chloride bearing solutions under hydrothermal conditions is important to understand the transport mechanism of uranium underground, which is of uttermost interest to parties studying the geological uranium deposits and those studying the possibilities of geological repositories for spent nuclear waste. I report an in-situ Raman spectroscopic study of the speciation distribution of aqueous uranyl-chloride complexes upto 500°C conducted using a HDAC as the high PT spectroscopic cell. The samples studied contained the species UO₂²⁺, UO₂Cl⁺, UO₂Cl₂⁰ and UO₂Cl₃^{- …}

Synthesis, Characterization And Crystal Growth Of I2-Ii-Iv-Vi4 And I4-Ii-Iv2-Vi7 Diamond-Like Semiconductors With Potential In Ir-Nlo Applications, Jennifer Glenn

Electronic Theses and Dissertations

In this dissertation, several new and existing diamond-like semiconductors (DLSs) were synthesized and investigated for their potential in infrared nonlinear optical (IR-NLO) applications. In Chapter 2 growth of large single crystals of Li₂MnGeS₄ was carried out using iodine vapor transport and a newly created graphite-tube containment system. This crystallization method produced sizable single crystals on the scale of 2x1x1 mm³, that were used to determine the material’s magnetic properties. Magnetization data indicate that the compound is antiferromagnetic with a Néel temperature of 10 K and an effective magnetic moment of 5.6 /f.u.. The specific heat …

Deposition Of Platinum Particles On Surface-Modified Carbon Ultramicroelectrodes, Caitlin Millsaps

Undergraduate Honors Theses

Nanoparticles are used as electrocatalysts due to their large surface area-to-volume ratios. Most studies of nanoparticle electrocatalysis are performed on collections of particles on a support, which represent ensemble average behavior influenced by spatial distribution of the nanoparticles. Therefore, recent emphasis has been placed on analyzing electrocatalytic behavior of single particles. The focus here is to develop carbon ultramicro- and nanoelectrode platforms for studying the electrocatalytic properties of single metal nanoparticles. Ultramicroelectrodes were prepared using chemical vapor deposition of carbon in pulled quartz capillaries. Electrode diameters were determined by cyclic voltammetry. Electrodes were modified using a soft nitriding technique to …

Surface Immobilization Of Terpyridine Compounds, Elizabeth Hallett

Chemical Engineering Undergraduate Honors Theses

The deoxydehydration (DODH) of polyols to alkenes is a promising method of producing high-value chemical feedstocks from biomass-derived materials. Current catalytic systems for DODH require the use of costly reducing agents that generate stoichiometric amounts of chemical waste. Immobilizing catalysts on electrode surfaces using chemical linking groups eliminates the need for sacrificial reductants. In this work, glassy carbon electrodes were modified with 4’-(3,4-dihydroxyphenyl)-2,2’:6’,2’’-terpyridine to investigate o-benzoquinone as a potential linking group for DODH, and possibly for other reactions. Previous studies involving electrodes modified with quinone-containing compounds have primarily been focused on catalyzing the oxidation of NADH; the nature or …

Synthesis And Characterization Of Dielectric And Multiferroic Nanocrystalline Transition Metal Oxide Materials And Nanocomposites, Frederick A. Pearsall

Dissertations, Theses, and Capstone Projects

Nanocrystalline transition metal oxides with unique chemical, physical, magnetic and dielectric properties have very broad applications, ranging from photocatalysis, capacitor energy storage and 4-state memory. Frequency stable, high permittivity nanocomposite capacitors produced under mild processing conditions offer an attractive replacement to MLCCs derived from conventional ceramic firing. In one project reported herein, 0-3 nanocomposites were prepared using BaTiO₃ (barium titanate, BTO) nanocrystals, suspended in a poly(furfuryl alcohol) matrix, resulting in a stable, high effective permittivity, low and stable loss dielectric. Effective medium approximations were used to compare this with similar nanocomposite systems. The use of synthesized BTO nanocrystal photocatalysts …

Development Of Granulated Adsorbent For Clean-Up Of Water Contaminated By Cesium, Esther Alorkpa

Electronic Theses and Dissertations

A study was conducted on sol-gel synthesis of an adsorbent (phosphotungstic acid embedded in silica gel, H-PTA/SiO­₂) of radioactive cesium. A novelty of this work is covalent bonding of PTA to the surface of solid support that prevents leaching from the surface of the material. The sample was granulated with a binder, aluminium oxide (γ-Al₂O₃). Solid-state NMR and FT-IR spectroscopy were used to confirm the presence of Keggin units of PTA in the bound materials. Thermal analysis of H-PTA/SiO­₂ - γ-Al₂O₃ (50 %) showed that the water content in the …

Increased Utility Of Ph Sensitive Indicators As High Concentration Co2 Detectors Through The Use Of Polyelectrolyte Complexes As Stabilizing Media, Camden James Johnson

All Master's Theses

Development of plastic materials which produce visible color change when exposed to different environments has recently attracted attention for many biomedical applications.^1,2Many biomedical devices are packaged under high concentrations of carbon dioxide (CO₂) which can lower the pH of the packaging environment. This is similar to the CO₂ chemistry responsible for ocean acidification.³ Dye molecules that are sensitive to environmental changes in pH (known as pH indicators) can be encapsulated in plastics and produce a visible color change when a medical device is removed from the sterile CO₂ environment. Plastics made from large …

Stabilized, Hybrid Solid-State Photocatalysts For Water Purification: Preparation, Properties And Performance Under Visible Light Irradiation, Karpagavalli Ramji

Seton Hall University Dissertations and Theses (ETDs)

Stabilized heterogeneous photocatalysts that use only solar light and air have been prepared and successfully employed to decontaminate water from organic pollutants. Organic dye pollutants present, for example in textile effluents, are one of the major sources of water pollution owing to their limited biodegradability, toxicity and potential carcinogenic risks. Before certifying water for public consumption, reuse in industries or for discharge in surface water the organic pollutants must be degraded, an effort that is energy intensive and currently requires complex methodologies. We report solid-state photocatalysts that use only visible light and air to treat wastewater. Perfluoroalkyl perfluoro-substituted zinc phthalocyanine …

Platinum@Hexaniobate Nanopeapods: Sensitized Composite Architectures For Photocatalytic Hydrogen Evolution Under Visible Light Irradiation, Clare Davis-Wheeler Chin

LSU New Orleans Theses and Dissertations

Hydrogen fuel is one of the most important areas of research in the field of renewable energy development and production. Hydrogen gas can be generated by fuel cells, water electrolyzers, and heterogeneous nanoscale catalysts. It can be burned to directly release chemical energy or condensed for storage and transport, providing fuel for combustion devices or storing excess energy generated by renewable sources such as wind turbines and concentrated solar power assemblies. While platinum is the most active catalyst for hydrogen reduction, its high cost significantly deters its utilization in advanced photocatalytic materials. One approach to mitigating this expense is optimizing …

Examining The Effects Of Amino And Thiolate Ligands On The Reactivity And Selectivity Of Palladium On Carbon In Hydrogenation Reactions, Eric Liu, Christina Li

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heterogeneous catalysts are used widely by chemical and energy industries because they show high reactivity but often suffer from lack of selectivity. On the other hand, ligands are commonly used in homogeneous catalysts to control the reactivity and selectivity; however, the effects of the ligands on the steric and electronic properties of heterogeneous catalysts are less understood. We examine the effects of four different ligands: 1-adamantanethiol, 1-adamantylamine, 1-dodecanethiol, and 1-dodecylamine, for the commercial hydrogenation catalyst palladium on carbon. Hydrogenation reactions are used as a screening tool to see the behavior that the different catalysts exhibit in the presence of unsaturated …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

Tumor-Targeting Fluorinated Phthalocyanines For Theranostic Applications, Erik Nathaniel Carrión

Seton Hall University Dissertations and Theses (ETDs)

Hydrocarbon-based therapeutics and imaging agents are prone to chemical oxidation and degradation resulting in loss of activity and limited functional utility. Thus, more material is required to achieve long-lasting therapeutic effects. Phthalocyanines (Pcs) and their metal complexes (PcMs) can be utilized as prodrugs requiring only renewable energy resources namely, air and light, for cancer therapy and diagnostic (theranostic) applications related to photodynamic therapy (PDT). Replacement of labile C-H bonds in the Pc scaffold with a combination of fluoro and perfluoroisopropyl groups has resulted in a stable yet reactive oxidation catalyst of biological significance and importance. For example, F₆₄PcZn, …

Photoelectrochemical Studies On Non-Noble Metal Based Catalysts Towards Tandem Solar Water Splitting, Arun Siddarth Sridhar

Dissertations

Photoelectrochemical (PEC) water splitting makes direct use of solar energy incident on semiconductor photoelectrodes, and it is a convenient, economic option to produce high purity hydrogen at low temperatures. The use of multiple light absorbers can increase overall solar energy utilization and provide a solution to the trade-off between overall band gap and band edge positioning of photoelectrodes specific to solar water oxidation and water reduction. The study of non-noble metal based catalysts for hydrogen evolution reaction (HER) and oxygen evolution reactions (OER) are essential for economic practical commercialization of photo-electrolyzers. This dissertation focuses on the use of a variety …

Synthesis Of A Silsesquioxane Based Supramolecular Polymer, Rachel Bianculli

Honors Projects

Research toward smart materials, specifically self-healing polymers, is an expanding topic within the materials science field. These materials rely heavily on dynamic crosslinking that is achieved by inducing different degrees of hydrogen bonding, van der Waals forces, etc. This work, demonstrated by research previously done within the Ostrowski research group, shows how coordination bonds of transition metals have been shown to create light activated, self-healing properties. Work done with these light-activated chromium (III) complexes with a poly(butylyene-co-ethylene) backbone have shown how metal—ligand coordination geometries can tune mechanical properties of the polymeric material. However, these materials suffer from being incredibly soft …

Development Of Rules Of Attraction For Intercalated Guest Molecules Inside Of A Hydrogen Bonded Framework, Matthew Fischer

Dissertations

Supramolecular chemistry has synthesized large and small molecules which host guest molecules for several decades. What started as a way to mimic of enzymes in nature, has exploded into a sea of materials such as porous coordination polymers, low-density metal-organic frameworks, inclusion compounds, and hydrogen bonded frameworks. We previously designed a layered framework consisting of a metal complex with coordinate covalent ligands. These ligands have peripheral carboxylic acid groups which hydrogen bond to organic pillars containing terminal amines. The layered structure is separated by these pillars, which are closed-packed, creating 1-dimensional channels able to co-crystallize molecules. There is interest in …

Steric Effects On The Formation Of Manganese Oxide Clusters And 2-Dimensional Ammonium Formate Architectures, Carl Oberle

Dissertations

It has been demonstrated by the Beatty group that altering the identity of the ortho-substituent of a dianiline counterion affects the assembly and dimensionality of a cadmium-chloride layer from 2-D to 0-D. This work seeks to extend this finding to metal oxide and organic hydrogen-bonded materials. By systematically increasing the ortho­-substituent’s size on the benzoate building block of reported manganese oxide clusters, of formula Mn_xO_y(O₂C-R)_zL_w (where R = Alkyl, L = neutral monodentate ligand), we aim to impact the self-assembly of these materials relative to their parent …

From Flasks To Applications: Design And Optimization Of Giant Quantum Dots Using Traditional And Automated Synthetic Methods, Christina J. Hanson

Nanoscience and Microsystems ETDs

Semiconducting nanocrystals, also known as quantum dots (QDs), that emit light with near-unity quantum yield and are extremely photostable are attractive options as down-conversion and direct electricity-to-light materials for a variety of applications including solid-state lighting, display technologies, bio-imaging and optical tracking. Standard QDs with a core/thin shell structure display fluorescence intermittency (blinking) and photobleaching when exposed to prolonged room temperature excitation for single dot measurements, as well as significant reabsorption and energy transfer when densely packed into polymers or at high solution concentrations.

We have developed thick shell “giant” QDs (gQDs), ultra-stable photon sources both at the ensemble and …

Imidazolium Ionic Liquids As Multifunctional Solvents, Ligands, And Reducing Agents For Noble Metal Deposition Onto Well-Defined Heterostructures And The Effect Of Synthetic History On Catalytic Performance, Michael Drake Ballentine

Masters Theses & Specialist Projects

1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM]Tf2N) was investigated as a multifunctional solvent, ligand, and reducing agent for platinum deposition onto well-defined CdSe@CdS nanorods. Platinum deposition was carried out thermally and photochemically using Pt(acac)2 as the metal precursor. Thermal deposition was investigated in [BMIM]Tf2N with and without addition of a sacrificial reducing agent, and product topology was compared with the products obtained from polyol reduction using 1,2-hexadecanediol, oleic acid, and oleylamine in diphenyl ether. Photochemically induced platinum deposition was carried out at room temperature in [BMIM]Tf2N, and product topology was compared with the photodeposition products obtained from a toluene dispersion. Thermal deposition of platinum …

Systematic Size Control In The Synthesis Of Zero-Valent Iron Nanoparticles, Grant C. Bleier

Chemistry and Chemical Biology ETDs

A novel synthetic method for the production of highly magnetic, low size-dispersity nanoparticles through reversible magnetic agglomeration is introduced and studied in detail. Initially, a weakly coordinating surfactant (3-octadecyl-2,4-pentanedione) is employed to produce a wide range of nanoparticle sizes ranging from 8 to 20 nm in diameter. The kinetics faced in these reactions by cheap and widely available iron complex precursors can be avoided in this method with the introduction of thermodynamic control, which occurs in the form of a magnetic precipitation event that essentially halts nanoparticle growth. Utilizing this synthetic method, the length of the alkyl chain on the …

Synthesis And Characterization Of Magnetic Cabides And Oxides Nanomaterials, Hei Man Tsui

Theses and Dissertations

The design and development of nanoparticles is of great interest in the current energy and electronic industry. However, based on the current materials available the production cost can be high with insignificant magnetic and mechanical properties. Specifically, rare-earth magnetic materials composed of neodymium and samarium are known for their high magnetic performance, however, due to the cost of development there is a need to develop a versatile and cost effective material. Alternatively, cobalt carbide nanomaterials have shown to be a promising alternative for rare-earth free magnets as they exhibit comparable properties as hexaferrite magnetic materials. The primary goal of this …