Inorganic Chemistry Commons^™

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Influence Of Synthesis Conditions On The Physicochemical And Electrocatalytic Properties Of Non-Stoichiometric Ba2sr2la2ti4o12 Perovskites, Ofeliya Kostadinova, Iliyan Popov, Simeon M. Stankov, Hristo Kolev, Tamara Petkov

Karbala International Journal of Modern Science

Present work studies the influence of the pretreatment milling media (deionized water (BLTOS-H) and isopropanol (BLTOS-i)) on the surface characteristics, structure, chemical composition and catalytic activity of non-stoichiometric Ba2Sr2La2Ti4O12 perovskites. The IR spectroscopy and XRD analyses shows a difference in the structure and phase composition of the two materials. X-ray photoelectron spectroscopy detects a Ba2+- and La3+-enriched and Sr2+-depleted surface. The BLTOS-i sample appears to exhibit higher specific surface area (SSA) and pore volume in comparison to BLTOS-H. The electrochemical tests showed that BLTOS-H sample have similar behavior to platinum at current densi-ties up to 10 mA cm-2, while BLTOS-i …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Modeling, Fabrication, And Characterization Of Rf-Based Passive Wireless Sensors Composed Of Refractory Semiconducting Ceramics For High Temperature Applications, Kavin Sivaneri Varadharajan Idhaiam

Graduate Theses, Dissertations, and Problem Reports

Real-time health monitoring of high temperature systems (>500^oC) in harsh environments is necessary to prevent catastrophic events caused by structural failures, varying pressure, and chemical reactions. Conventional solid-state temperature sensors such as resistance temperature detectors (RTDs) and thermocouples are restricted by their operating environments, sensor dimensions and often require external power sources for their operation. The current work presents the research and development of RF-based passive wireless sensing technology targeting high temperatures and harsh environmental conditions. Passive wireless devices are generally classified as near-field and far-field devices based on the interrogation distance. Near-field sensors are placed at …

The Dawn Of New Quantum Dots: Synthesis And Characterization Of Ge1-Xsnx Nanocrystals For Tunable Bandgaps., Richard J. Esteves

Theses and Dissertations

Ge_1-xSn_x alloys are among a small class of benign semiconductors with composition tunable bandgaps in the near-infrared spectrum. As the amount of Sn is increased the band energy decreases and a transition from indirect to direct band structure occurs. Hence, they are prime candidates for fabrication of Si-compatible electronic and photonic devices, field effect transistors, and novel charge storage device applications. Success has been achieved with the growth of Ge_1-xSn_x thin film alloys with Sn compositions up to 34%. However, the synthesis of nanocrystalline alloys has proven difficult due to larger discrepancies (~14%) in …

Basic Mosfet Fabrication, Daniel A. Ivy

Natural Sciences Student Research Presentations

The MOSFET, or metal-oxide-semiconductor field-effect transistor, are the sole entities responsible for processing in microchips of everyday electronics, yet they have become extremely small. How can one manufacture such a small, powerful product? By using the simple process of pushing ions away with a nearby electric charge, a switch can be compressed down to unimaginable sizes.

New Effects Of Aging And Lattice Intercalation On Surface Properties Of Titanate Nanobelts, Roger Williams

Graduate Theses and Dissertations

Titanate nanobelts (NBs) have structural characteristics beyond that of clays. Due to a negatively charged lattice matrix of edge-shared TiO6-octahedra, the location of intercalated cations within the interlayer space may dictate the charge-conductions. This environment may in turn govern the lattice-framework's stability and surface properties, based upon our preliminary

data.

On that basis, these nanomaterials have been found in our lab to possess superb biological compatibility that is closely related to the types of the intercalated cations. In addition, a prolonged agitation was proven to enable us to manipulate the titanate NBs' length. In a parallel study, a ripening was …

Brust-Schiffrin Synthesis Of Catalytic Bipodal Pdpt Nanoparticles With Some Mechanistic Insights, Sangbum Han, Vara P. Sheela, Wei Cao, Balasubramanian Ramjee

Applied Research Center Publications

Brust–Schiffrin reduction of Pd and Pt precursors in the presence of resorcinarene amine surfactant led to the formation of substantially Pt rich, PdPt bimetallic nanoparticles of a V-shape or variants on the V-shape. New insights into this reaction are provided on the basis of reversed Brust–Schiffrin syntheses, DLS, UV-vis, and NMR analysis. Based on our experiments we conclude that the resorcinarene amine surfactant is part of the inverse micelle formed from TOABr and it also selectively complexes with the Pd salts prior to their reduction. Remarkably, the composition of the bipodal nanoparticles could be varied substantially by varying the reaction …

Tunable Gold Nanostructures With Nanocapsules As Template Reaction Vessels, Balasubramanian Ramjee, Srujana Prayakarao, Sangbum Han, Wei Cao

Chemistry & Biochemistry Faculty Publications

Hollow, polymeric, thiol-ene resorcinarene nanocapsules can act as template reaction vessels for the synthesis of gold nanoshells or spherical aggregates of gold nanoparticles depending on the reaction conditions. The spherical nanoparticle aggregates were evaluated as catalysts in the biphasic reduction of 4-nitrophenol.

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Optical Properties Of Si, Ge, Gaas, Gasb, Inas, And Inp At Elevated Temperatures, Thomas R. Harris

Theses and Dissertations

Investigation of the optical and electrical behavior of some semiconductors at very high temperatures has not been an area of much study, at least not experimentally. The importance of such research becomes obvious due to the effects of high temperatures on semiconductor devices such as infrared detectors and light emitters. Besides the destructive effects of thermal stress and melting, changes in the optical properties of the material can greatly affect device performance. In this research, the infrared absorption of Si, Ge, GaAs, GaSb, InAs, and InP was measured from 0.6 to 25 μm at temperatures ranging from 295 up to …

Changes To Electrical Conductivity In Irradiated Carbon-Nickel Nanocomposites, David F. Coy

Theses and Dissertations

Pre and post irradiation resistivity and XAFS measurements have been conducted to examine the effects of 0.5 MeV electron irradiations on nickel-carbon composites. Results showed a decrease in surface resistivity in all sample types of 14-30% following irradiation with a total electron exposure of 4 x 10^-16 cm^-2. Results also showed a corresponding decrease in NiO content for the irradiated samples as compared to measurements of non-irradiated samples. Surface resistivity measurement capabilities were established and measurement techniques refined to produce repeatable results of sufficient precision to discern changes in resistivity for an exposure of 2 x 10 …

Resonant Energy Transfer From Argon Dimers To Atomic Oxygen In Microhollow Cathode Discharges, M. Moselhy, R. H. Stark, K. H. Schoenbach, U. Kogelschatz

Bioelectrics Publications

The emission of atomic oxygen lines at 130.2 and 130.5 nm from a microhollow cathode discharge in argon with oxygen added indicates resonant energy transfer from argon dimers to oxygen atoms. The internal efficiency of the vacuum-ultraviolet (VUV) radiation was measured as 0.7% for a discharge in 1100 Torr argon with 0.1% oxygen added. The direct current VUV point source operates at voltages below 300 V and at current levels of milliamperes.

Xenon Excimer Emission From Pulsed Microhollow Cathode Discharges, M. Moselhy, R. H. Stark, K. H. Schoenbach, U. Kogelschatz

Bioelectrics Publications

By applying electrical pulses of 20 ns duration to xenon microplasmas, generated by direct current microhollow cathode discharges, we were able to increase the xenon excimer emission by more than an order of magnitude over direct current discharge excimer emission. For pulsed voltages in excess of 500 V, the optical power at 172 nm was found to increase exponentially with voltage. Largest values obtained were 2.75 W of vacuum-ultraviolet optical power emitted from a single microhollow cathode discharge in 400 Torr xenon with a 750 V pulse applied to a discharge. Highest radiative emittance was 15.2 W/cm². The …

Generation Of Intense Excimer Radiation From High-Pressure Hollow Cathode Discharges, Ahmed El-Habachi, Karl H. Schoenbach

Bioelectrics Publications

By reducing the diameter of the cathode opening in a hollow cathode discharge geometry to values on the order of 100 μm, we were able to operate these discharges in noble gases in a direct current mode up to atmospheric pressure. High-pressure discharges in xenon were found to be strong sources of excimer radiation. Highest intensities at a wavelength of 172 nm were obtained at a pressure of 400 Torr. At this pressure, the vacuum ultraviolet (VUV) radiant power of a single discharge operating at a forward voltage of 220 V and currents exceeding 2 mA reaches values between 6% …

Microhollow Cathode Discharges, K. H. Schoenbach, R. Verhappen, R. Tessnow, F. E. Peterkin, W. W. Byszewski

Bioelectrics Publications

The current–voltage characteristics of hollow cathode discharges and their predischarges in argon under dc and pulsed conditions were found to have a positive slope at pressures up to approximately 50 Torr, and currents up to 20 mA, at a hole diameter of 0.7 mm. In this range of pressure and current, parallel operation of hollow cathode discharges, without ballast, was demonstrated. Scaling to higher pressure is possible by reducing the hole diameter. Pulsed experiments with an array of cathode rings of 75 μm diameter allowed us to obtain parallel operation of more than 50 discharges at a pressure of 350 …