Inorganic Chemistry Commons^™

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO₂-supplemented raceway ponds, each with a 33-m² surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …

Synthesis, Characterisation, Electrochemical, And Spectroscopic Studies Of Cobaloximes: Unique Clues Of Cobalt(I) Species In Various Solvents, Michael John Celestine

Chemistry & Biochemistry Theses & Dissertations

With the dwindling amount of fossil fuels in the world’s reserve is said to run out in the future. The use of alternative fuels such as hydrogen can be produced from renewable sources. One source is the use of first row transition metal complexes that can harness the power of the sun to reduce protons to hydrogen. In this thesis we investigated a well-known hydrogen evolution catalyst in a quest to understand the behavior of different oxidation states that occur during the catalytic cycle.

In an attempt to synthesize a binuclear ruthenium(II) complex, [{Ru(phen)2}2{µmes(1,4-phO-Izphen)3}](PF6)4, as a possible photosensitizer for the …

Spectroscopic And Kinetic Study Of Copper-Exchanged Zeolites For The Selective Catalytic Reduction Of Nox With Ammonia, Shane Adam Bates

Open Access Dissertations

The recent application of metal-exchanged, small-pore zeolites for use in the selective catalytic reduction (SCR) of NO_x with ammonia NH₃ for automotive deNO_x applications has been a great stride in achieving emission standard goals. Copper-exchanged SSZ-13 (Cu-SSZ-13), the small-pore zeolite in this study, has been shown to be very hydrothermally stable and active under conditions presented in the exhaust of the lean-burn diesel engine. In this work, detailed studies were performed to identify many aspects of the active site(s) in Cu-SSZ-13 in order to learn about the standard SCR mechanism.

A series of seven Cu-SSZ-13 samples were …

Multiscale Modeling Of Enzyme-Catalyzed Methanol Production By Particulate Methane Monooxygenase, Katherine K. Bearden

Doctoral Dissertations

In this work, the conversion of methane to methanol by the particulate Methane Monooxygenase (pMMO) enzyme is investigated using a multi-scale modeling approach. This enzyme participates in carbon cycling and aids in the removal of harmful atmospheric methane, converting it to methanol. The interaction between pMMO and a neighboring enzyme that is present in the same organism is studied, and the unknown pMMO active site is elucidated and tested for methane oxidation towards the production of methanol.

Fundamental knowledge of pMMO's mechanism is not fully understood. Understanding how this enzyme works in nature will provide information towards designing efficient synthetic …

Preparation Of Cobalt/Nickel Molybdenum Sulfide Catalysts Supported By Aqueous Media Soluble Multi-Wall Carbon Nanotubes., Hassan Ahmad Bleibel

Open Access Theses & Dissertations

Multi-walled carbon nanotubes (MWCNTs) have been subjected to chemical treatment in order to introduce hydrophilic functional groups on their surfaces. These covalently bonded groups did enhance the solubility of MWCNTs in aqueous media as expected. Functionalized MWCNTs were characterized using FTIR, Raman spectroscopy, TGA, X-ray diffraction, dispersion test and TEM. Then, functionalized MWCNTs were incorporated in the hydrothermal synthesis method of transition metal sulfide catalysts (CoMo, NiMo, and Ethylenediamine-CoMo Sulfides). Catalysts were characterized using X-ray diffraction, TEM, SEM, N2 Gas adsorption-desorption, elemental analysis, and Hydrodesulfurization (HDS) reaction of dibenzothiophene (DBT). The objective was to study the functionalized MWCNTs' effect; being …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

Refractive Index Chemical Sensing With Noble Metal Nanoparticles, Phillip Blake

Graduate Theses and Dissertations

Chemical sensing is a key component in modern society, especially in engineering applications. Because of their widespread impact, improvements to chemical sensors are a significant area of research. One class of sensors, plasmonic sensors, is being heavily researched because of their ability to detect low levels of analyte in near real time without destroying the analyte. This work studies a new class of plasmonic sensor that utilizes diffractive coupling to improve sensor performance. Specifically, this work outlines the first study of diffractive coupling sensors with typical nanoparticle shapes. Sensitivity of this new class of sensor is directly compared to typical …

Investigation And Synthesis Of Novel Graphene-Based Nanocomposites For Hydrogen Storage, Anthony Joseph D'Angelo

USF Tampa Graduate Theses and Dissertations

It is of great interest to develop and utilize a high surface area material with optimized hydrogen sorption properties. The need for a renewable energy source to replace automobile gasoline has become more critical in the past decade. Hydrogen is a viable fuel source for automobile usage; however, the question of how hydrogen will be safely and efficiently stored still remains. Critical factors for optimum hydrogen storage include ambient conditions and low activation temperature for adsorption and desorption phenomena. In order for optimum hydrogen adsorption to be achieved, the properties of (1) high surface area, (2) optimum hydrogen adsorption energy, …

Computational Studies Of Ion Transport In Polymer Electrolytes, Hui Wu

Doctoral Dissertations

Improving ionic conductivity and lithium mobility in polymer electrolytes is important for their practical use for battery electrolytes. In this study, a combination of molecular dynamics and Monte Carlo simulations was used to bring insight into lithium ion transport in poly(ethylene oxide) (PEO) with plasticizers and also next to alumina solid surface doped with lithium salt. The simulations were performed using a moderately high molecular weight polymer (Mn = 10,000 g/mol) at an EO:Li ratio of 15. For the plasticized system, the PEO with LiN(CF3SO 2)2 (LiTFSI) was mixed with 10 wt% plasticizers that included either cyclic ethylene carbonate …

Electrodeposition Of Tin Using Tin(Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

Transition Metal Catalysts For Hydrodesulfurization Reactions Applied To Petroleum Industry, Brenda Torres

Open Access Theses & Dissertations

Catalysis plays a fundamental role in petroleum refining and basic petrochemical industries creating new routes in the development of industrial processes. Moreover, catalysis has become indispensable to the solution of environmental pollution problems and therefore on public health. World wide concerns for preservation of the environment has motivated the development of "Green" catalyst based technologies, to achieve a better utilization of petroleum resources and demands for cleaner transportation fuels. These environmental concerns have led to increasingly drastic regulations on sulfur, nitrogen and aromatics content in fuels. Sulfur content in the motor and diesel fuels is continuously reduced by regulations to …

Thermal Characterization Of Carbon Monoxide Oxidation Catalysts Using Thermogravimetric Analysts And Differential Scanning Calorimetry, Rene A. Bartgis

Chemistry & Biochemistry Theses & Dissertations

Catalysts composed of platinum and/or palladium on tin (IV) oxide supports, with and without silica gel, as well as catalysts composed of gold on manganese oxide, have been developed for the recombination of carbon monoxide and oxygen to form carbon dioxide for use in carbon dioxide lasers. A thermogravimetric method and a differential scanning calorimetric method have been developed for the thermal characterization of these catalysts. The mass loss data and the enthalpy changes determined as the catalysts lost water were then related to existing activity data for these catalysts. No relationship was found between the thermal data and the …