Environmental Chemistry Commons^™

Modeling Vitexin And Isovitexin Flavones As Corrosion Inhibitors For Aluminium Metal, Abdullahi Muhammad Ayuba, Umaru Umar

Karbala International Journal of Modern Science

Theoretically, the aluminium corrosion inhibitive performance of vitexin (VTX) and isovitexin (SVT) were evaluated with a view of establishing the mechanism of the inhibition process. Calculations which include the consideration of several global descriptors were studied to describe and correlate the reactivity of the molecules with the computed descriptors. First and second-order condensed Fukui functions were employed to analyze local reactivity parameters, while simulations involving the adsorbed molecules on Al (1 1 0) surface were conducted through quench dynamic simulations and the mechanism of physical adsorption was established with SVT relatively been a better inhibitor on Al surface than VTX.

006— Pretreatment And Fiber Content Analysis Of Cannabis Sativa, Dina Bu, Jessica Roggie, Sarah Schmidlin, Barnabas Gikonyo

GREAT Day Posters

Cannabis sativa commonly known as hemp is one of the fastest-growing plants whose refined products have immense commercial value. Various products include refined hemp such as: biofuels, biodegradable plastics, textiles, dietary supplements, paper, clothing, and much more. Hemp fibers are also used in construction and manufacturing applications by strengthening their composite products. Hemp is a high yielding, sustainable, and environmentally friendly crop due to its various qualities, and has the potential to yield valuable raw materials for a great number of applications. Our research evaluates the pretreatment of hemp as well as the comparative analysis of the fiber content thereof. …

041— Fiber Decomposition And Pretreatment Analysis Of Cannabis Sativa L.: Hemp, Dina Bu, Jessica Roggie, Sarah Schmidlin, Barnabas Gikonyo

GREAT Day Posters

Hemp is a subspecies of Cannabis sativa L. along with marijuana, yet the two differ in chemical constituent levels of delta-9-tetrahydrocannabinol (THC) and cannabidiol (CBD). Hemp contains 0.3% THC, compared to marijuana 17.1%, allowing it to be a safe and compelling biomass for investigation. The refined products of hemp are vast due to its fast-growing properties; therefore various commercial industries have included refined hemp in biofuels, biodegradable plastics, textiles, dietary supplements, paper, clothing, and much more. Construction and manufacturing applications have also been seen to include hemp to strengthen their composite products. The high-yielding, sustainable, and environmentally friendly qualities …

Development Of Engineered Soil Surrogates For Modeling Natural Soil Sorption Behavior, Ghada Yehia Abdalla

LSU Doctoral Dissertations

The land produces more than 95% of the global food supply, and with a continuously growing population, we need to optimize the use of the available agricultural land. Soil organic matter (SOM) is an essential component of soils, especially concerning their fertility and sorption behavior. The chemical composition of the SOM consists of lipids, lignin, and cellulose. However, the heterogeneous and complex nature of SOM, and real soils, makes their study challenging and introduces uncontrollable factors.

Therefore, structural mimics of natural soils with increasing complexity representing the real soil functionality were synthesized and evaluated for bulk properties related to their …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Cobalt, Molybdenum, And Nickel Complexes, Natural Zeolites, Epoxidation, And Free Radical Reactions, Nicholas K. Newberry

Dissertations, Master's Theses and Master's Reports

Chapter 2 is based on the synthesis and study of the compounds of the bidentate ligand ((5-phenyl-1H-pyrazol-3-yl)methyl)phosphine oxide with molybdenum and cobalt as the transition metal. The complexes were analyzed via FTIR, NMR, UV-Vis, Fluorescence Spectroscopy, TGA, DFT, and XRD. Chapter 3 resulted in the synthesis of the complexes [Ni(II)SSRRL](PF6)2 and [Ni(II)SRSRL](Cl)(PF6) of which [Ni(II)SRSRL](Cl)(PF6) had not been previously analyzed. Both products were analyzed via FTIR, NMR, UV-Vis, CV, DFT, and XRD. Chapter 5 contains the results of the characterization and modification of 4 natural zeolites (AZLB-Na, AZLB-Ca, NM-CA, NV-Na) from the United States in an attempt to increase the …

Hexacyanoferrate-Based Nanocomposites For The Electrochemical Sensing Of Hydrogen Peroxide And Nicotine, Lee Pui Kee

Student Works (2020-2029)

Metal hexacyanoferrate (MeHCF) is a unique material that not only acquired immense research interest in electrochemical sensing field but also possesses potential as energy storage material. As such, the present thesis sought to investigate the facile method to synthesis MeHCF-based nanocomposites and explore its possible applications. First, comparative research on the synthesis of Prussian blue-polypyrrole (PB-PPy) nanocomposite by novel self-assembly (SA) method and conventional electrodeposition technique was performed. PB-PPy nanocomposites were prepared by the novel self-assembly method and via the electrodeposition approach. The nanocomposites were compared in term of surface morphology and its electrochemical and electrocatalytic characteristics. The results indicated …

Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo

Journal of Science Education for Students with Disabilities

This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.

The Influence Of Carbon Nanotubes And Mn Dopant Onto Zinc Oxide For Degradation Of Organic Pollutant Model Under Visible Light Irradiation, Ab Wahab Norfarhanah

Student Works (2020-2029)

Globally untreated industrial wastewaters are contaminating soil, surface water, groundwater, and consequently, the environment. Therefore, there is a huge interest in developing efficient and effective removal methods, such as photocatalytic advanced oxidation processes (AOP) under visible light (~47% of solar irradiation). In this work, the effectiveness of Mn-doped ZnO composite decorated onto multiwall carbon nanotubes (MWCNTs) on photodegrading organic pollutants was studied. This composite was simultaneously synthesized by sol gel method. XRD was used to confirm the formation of ZnO/Mn nanocomposite and the crystalline phase changes as ZnO content decreases when other elements were added to form the nanocomposite. The …

Mesoporous Adsorbents For Perfluorinated Compounds, Bertha Lotsi

Electronic Theses and Dissertations

Effective adsorbents for polyfluorinated compounds (PFCs) were successfully prepared. And they were tested in the adsorption of perfluorooctanoic and perfluorooctanesulfonic acids. Bridged silsesquioxanes containing secondary and tertiary amino groups were synthesized by sol-gel condensation of bis[3-(trimethoxysilyl)propyl]amine and bis[3-(methylamino)propyl]-trimethoxysilane in acidic media with surfactants. Obtained materials are mesoporous with a high BET surface area. They combine high structural stability with a high concentration of surface amino groups serving as adsorption sites. Batch adsorption tests demonstrated their extremely high adsorption capacity on PFCs: in some experiments, it reached up to 88% of the adsorbent weight. Adsorption of PFCs changed the surfaces of …

Immobilization Of Phosphotungstic Acid On Silica Surface For Catalytic Alkylation Of Aromatic Compounds, Anastasia Kuvayskaya

Electronic Theses and Dissertations

Superacidic mesoporous materials containing covalently embedded PTA were synthesized by sol-gel method. Tetraethyl orthosilicate (TEOS) and phosphotungstic acid (PTA) were used as precursors in the synthesis, ionic and nonionic surfactants were used as pore-forming agents, the reaction proceeded in acidic media. TEM images revealed mesoporous structure with embedded PTA clusters. FT-IR spectra of obtained materials contained characteristic bands of PTA at 957 cm-1. Synthesized catalysts had high BET surface area and high concentration of acidic sites. Alkylation of 1,3,5-trimethylbenzene by 1-decene demonstrated high catalytic activity. The catalyst obtained with Pluronic P123 as a template was the most effective and resulted …

Synthesis And Fabrication Of Trimetallic (Ru-Mn Co) Catalyst Supported On Tio2 And Ni(Oh)2 Thin Films For Photoelectrochemical Applications, Che Mat Ahmad Nazeer

Student Works (2020-2029)

Anatase supported heterogeneous photocatalyst consisting of RuO2, MnO2 and Co3O4 (1:13:13 ratio) was synthesized by precipitation method. The film of the prepared catalyst was fabricated by electrophoretic deposition technique in an aqueous solution of 0.1 mM ammonia and tested for photoelectrocatalytic (PEC) oxidation of methanol in 0.1M KOH under visible light irradiation. The as-prepared photocatalyst was characterized by FTIR, UV–Vis, XRD, Raman spectroscopy, FESEM/EDX, TEM, BET, XPS and TPR. The PEC study by cyclic voltammetry indicates that the oxidation of methanol to CO2 and H2O upon exposure to visible light occurs between 400 and 800 nm. The smaller value of …

Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …

Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not support a long-term …

Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof

Chemical Engineering

The electrocatalytic activity of platinum (Pt)–modified glassy carbon (GC) (referred as Pt/GC) electrodes toward the formic acid electro−oxidation (FAO) was investigated. The Pt deposition on the GC substrate was carried out by a potentiostatic technique at different potentials (from 0.2 V to −0.2 V vs. Hg/Hg2Cl2/KCl (sat.) reference electrode) and the corresponding influence on the catalytic activity toward FAO was monitored. The electrocatalytic inspection revealed a potential role for the Pt deposition potential in boosting the catalytic efficiency of the catalyst toward FAO and further in mitigating the CO poisoning that eventually deactivate the catalyst. Interestingly, the highest activity toward …

A Spin-Coated Tiox/Pt Nanolayered Anodic Catalyst For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad Prof

Chemical Engineering

The CO poisoning of the platinum anodic catalyst which typically functions the catalytic deterioration of the direct formic acid fuel cells could be minimized with a simple modification for Pt with titanium oxide. The fabrication scheme involved the spin-coating of a Ti precursor onto a Pt thin layer that was physically sputtered onto a Si substrate. The whole assembly was subjected to a post-annealing processing to produce the TiOx layer (60 nm) in a porous structure (mostly Anatase) atop of the Pt surface. The porous nature of the TiOx layer permitted the participation of Pt in the electrocatalysis of the …

Identification Of Adsorbate Ft-Ir Bands Using In-Situ Techniques: Pd Speciation And Adsorption Chemistry Of Pd-Zeolites For Passive Nox Adsorption, Robert Bruce Pace Iii

Theses and Dissertations--Chemistry

To meet increasingly stringent automotive emissions standards, further improvements in catalytic converter design are necessary. Current automotive catalyst systems are effective at eliminating emission of nitrogen oxides (NO_x) once the catalyst reaches operational temperature (~200 °C). NO_x emitted at lower catalyst temperatures now comprises most of the NO_x released during a typical test cycle. Referred to as “the cold start problem” this issue has come to the forefront of automotive catalyst development, as mitigating these emissions is necessary to further reduce automotive emissions. Passive NO_x adsorbers present an appealing solution to the cold start problem, …

The Development Of An Integrated Simulation Model On Understandings On The Interaction Between Electromagnetic Waves And Nanoparticles, Xiaojin Wang

Masters Theses & Specialist Projects

To investigate the interaction between nanoparticles and electromagnetic waves, a numerical simulation model based on FEM was built in this thesis. Numerical simulation is an important auxiliary research method besides experiments. The optical properties of nanoparticles consist of scattering, absorption, and extinction, and in the case of nanoparticle suspension, the transmission is also involved. This thesis addressed two typical applications based on the established model, one was regarding the nanofluids for solar energy harvesting, and the other was regarding the optical properties of atmospheric soot. In the case of the nanofluids solar energy harvesting, the established model provided a convenient …

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Development Of Granulated Adsorbent For Clean-Up Of Water Contaminated By Cesium, Esther Alorkpa

Electronic Theses and Dissertations

A study was conducted on sol-gel synthesis of an adsorbent (phosphotungstic acid embedded in silica gel, H-PTA/SiO­₂) of radioactive cesium. A novelty of this work is covalent bonding of PTA to the surface of solid support that prevents leaching from the surface of the material. The sample was granulated with a binder, aluminium oxide (γ-Al₂O₃). Solid-state NMR and FT-IR spectroscopy were used to confirm the presence of Keggin units of PTA in the bound materials. Thermal analysis of H-PTA/SiO­₂ - γ-Al₂O₃ (50 %) showed that the water content in the …

Effect Of Dissolved Salts On The Physiochemical Properties Of Deep Eutectic Solvents, Eleanor Haeska, Megan Radtke

The Journal of Undergraduate Research

Green chemistry seeks to make chemical procedures safer, improve reaction efficiency, and utilize environmentally safe reagents. Deep eutectic solvents (DES) have recently become of great interest due to their eco-friendly nature and functionality as solvent for various chemical processes. One key characteristic of DES is their conductive nature and depressed melting point. This project sought to determine the effect of the addition of aqueous solutions of halides on the conductivity of two selected types of DES. Also assessed were the polarity and viscosity of the DES. It can be concluded that aqueous halides had no measureable effect on the conductivity …

Facile Synthesis Of A Tailored-Designed Au/Pt Nanoanode For Enhanced Formic Acid, Methanol, And Ethylene Glycol Electrooxidation, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof

Chemical Engineering

The recent revolution in nanoscience and global energy demand have motivated research in liquid fuel cells (LFCs) due to their enhanced efficiency, moving flexibility, and reduced contamination. In line with this advancement, a glassy carbon (GC) electrode was modified with platinum (PtNPs) and gold (AuNPs) nanoparticles to fabricate a nanosized anode for formic acid, methanol, and ethylene glycol electrooxidation (abbreviated, respectively, to FAO, MO, and EGO), of the key anodic reactions of LFCs. The deposition sequence of the catalyst’s layers was important where the Au/Pt/GC electrode (in which PtNPs were directly deposited onto the GC surface followed by AuNPs—surface coverage …

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

In this investigation, a Pt-Au nanocatalyst prepared by the coelectrodeposition of Pt (PtNPs) and Au (AuNPs) nanoparticles is assembled onto a glassy carbon (GC) electrode for efficient methanol oxidation (MO). Several molar ratios between PtNPs and AuNPs have been used and the corresponding catalytic activity towards MO is tracked. The Pt1:Au1 catalyst showed the highest catalytic activity (5 times higher oxidation peak current (Ip) and a 126 mV negative shift in the onset potential (Eonset) toward MO). The catalyst’s morphology, composition and activity are investigated and the ehancement mechanism is recognized.

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Stabilized, Hybrid Solid-State Photocatalysts For Water Purification: Preparation, Properties And Performance Under Visible Light Irradiation, Karpagavalli Ramji

Seton Hall University Dissertations and Theses (ETDs)

Stabilized heterogeneous photocatalysts that use only solar light and air have been prepared and successfully employed to decontaminate water from organic pollutants. Organic dye pollutants present, for example in textile effluents, are one of the major sources of water pollution owing to their limited biodegradability, toxicity and potential carcinogenic risks. Before certifying water for public consumption, reuse in industries or for discharge in surface water the organic pollutants must be degraded, an effort that is energy intensive and currently requires complex methodologies. We report solid-state photocatalysts that use only visible light and air to treat wastewater. Perfluoroalkyl perfluoro-substituted zinc phthalocyanine …

Photocatalytic Activity: Experimental Features To Report In Heterogeneous Photocatalysis, Md. Ariful Hoque, Marcelo I. Guzman

Chemistry Faculty Publications

Heterogeneous photocatalysis is a prominent area of research with major applications in solar energy conversion, air pollution mitigation, and removal of contaminants from water. A large number of scientific papers related to the photocatalysis field and its environmental applications are published in different journals specializing in materials and nanomaterials. However, many problems exist in the conception of papers by authors unfamiliar with standard characterization methods of photocatalysts as well as with the procedures needed to determine photocatalytic activities based on the determination of “apparent quantum efficiencies” within a wavelength interval or “apparent quantum yields” in the case of using monochromatic …

Assembling Of Niox/Mwcnts-Gc Anodic Nanocatalyst For Water Electrolysis Applications, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Saher D. Khamis Eng

Chemical Engineering

Glassy carbon (GC) electrode is intended to be modified with nickel oxide (NiOx) and multiwalled carbon nanotubes (MWCNTs) in the anodic reaction of water electrolysis. NiOx deposition time is optimized and a 5 min was enough to attain the maximum activity. A further modification of the catalyst with MWCNTs could greatly enhance its stability during continuous electrolysis. As an outcome, an energy amount of 21.7 kWh/KgO₂ is minimized. Several electrochemical and materials characterization setups will be utilized to test the catalyst activity and to know its geometry and structure.