Environmental Chemistry Commons^™

Synthesis And Characterization Of Carbon Quantum Dots And Gold Nanoparticles For Norovirus Biosensing Applications In Water Systems, Breanne Evans

Master's Theses

Rapid, reliable detection of viral pathogens remains a significant challenge across water-treatment and environmental monitoring systems, including drinking-water, wastewater, water reuse, and environmental surveillance applications. Waterborne viral contamination can pose substantial public-health risks, making early detection essential for protecting water quality and responding quickly to treatment failures or contamination events. Direct potable reuse (DPR) is one particularly demanding example because it requires continuous verification of treatment performance and the broader need for rapid virus monitoring extends across many water-treatment and environmental surveillance applications. Norovirus is a priority target because of its widespread occurrence in wastewater, environmental persistence, and exceptionally low …

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Czts Nanoparticles As Cost Efficient Catalysts For Producing Green Hydrogen, Aidan Hau

Undergraduate Research Symposium (2026- )

Hydrogen gas is produced to be used as feedstock, fertilizer, and fuel. Traditional hydrogen production produces “gray hydrogen” in a process that uses and releases fossil fuels into the atmosphere. One way to produce “green” hydrogen is with renewable energy technologies that produce hydrogen gas using electrolysis without emitting fossil fuels. In electrolysis, the hydrogen atoms bonded to oxygen in a water molecule are split to produce hydrogen. A typical catalyst for this process would be a precious metal like palladium, which can be costly. In order to make green hydrogen production more affordable, an alternative catalyst composed of CZTS …

Anthrone-Based Dummy Molecularly Imprinted Polymer For The Selective Detection Of Fluorene And Phenanthrene In Simulated River Water, Aria Pinandita, Nurrahmi Handayani, Muhammad Iqbal, Untung Triadhi, Rusnadi Rusnadi, Samitha Dewi Djajanti, Muhammad Bachri Amran, Muhammad Ali Zulfikar

Makara Journal of Science

A dummy-template molecularly imprinted polymer (DMIP) was synthesized via precipitation polymerization using anthrone as a template analog for the selective analysis of low-molecular-weight polycyclic aromatic hydrocarbons (PAHs), specifically fluorene and phenanthrene. Styrene, benzoyl peroxide, and ethylene glycol dimethacrylate were employed as the functional monomer, radical initiator, and crosslinking agent, respectively. The synthesized polymers were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and particle size analysis. The imprinting factors were 1.16 and 1.09 for fluorene and phenanthrene, respectively, indicating enhanced affinity of the imprinted sites. High-performance liquid chromatography analysis following DMIP-based solid-phase extraction yielded recoveries of 91.49% ± 3.87% for …

A Ferrocene-Modified Carbon Electrode Prepared From Coconut Shell Char For Cu(Ii) Detection In Water, Nabila Putri Aulia, Fitria Rahmawati, Abu Masykur, Eddy Heraldy

Makara Journal of Science

A ferrocene (Fc)-modified carbon electrode was prepared from coconut shell char (CSC), which was activated with NaOH to produce an activated coconut shell carbon (Ac-CSC). The carbon electrode was designed as a printed-carbon electrode consisting of working, counter and reference electrodes in a single piece, called a screen-printed carbon electrode, or SPCE. An Fc solution was applied to the working electrode part at 10%, 20% and 30% mass of the SPCE, producing an SPCE-Fc as an electrochemical sensor for Copper ions Cu(II) detection. The prepared activated carbon was analysed by XRD, FTIR, SEM/EDX, surface area analysis and impedance measurement to …

The Chemistry Of Red Lipstick: The Impact Red Lipstick Has On Society, Lilliana Weldeslassie

Electronic Theses & Dissertations (2024 - present)

Cosmetic chemistry is deeply embedded in everyday life, shaping the products people use from morning to night. Among these, red lipstick stands out as a formulation that blends complex chemistry with a cultural meaning. This thesis examines the scientific foundations of red lipstick through its chemical composition, pigment structure, toxicological history, analytical methods, and evolving sustainability practices. Historically, red lipsticks relied on high-risk ingredients such as lead, mercury, and other toxic metals, reflecting an era before chemical safety and regulatory oversight were incorporated.²¹ Modern formulations have established safer synthetic dyes, natural waxes, plant-based oils, and stabilizers created to optimize …

Adsorption Of Cu(Ii) Ions From Aqueous Solutions Using A Magnetite Biochar Composite Material, Widi Aprilia Ta'bi, Paulina Taba, Abdul Wahid Wahab, Maming Gappa, Muhammad Zakir, Nur Umriani Permatasari

Makara Journal of Science

Water contamination from heavy metals, such as Cu(II) ions, poses severe threats to human health and the environment. This necessitates the development of efficient and eco-friendly treatment methods. In this study, a magnetite–biochar composite (MBC) was developed as an effective adsorbent for reducing Cu(II) ions from liquid waste. Biochar was produced through the pyrolysis of water hyacinth at 500 °C, while magnetite was synthesized using FeSO₄·7H₂O and FeCl₃·6H₂O with molar ratio of 1:2. The MBC was formed using a co-precipitation method and characterized by Fourier transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Brunauer–Emmett–Teller, and vibration sample magnetometer instruments. FTIR analysis …

The Quality Of Bio-Pellets Made By Combining Walnut Kernel Shells (Canarium Indicum L.) From Bogor, Indonesia, And Palm Kernel Shells As Renewable Energy, Ani Iryani, Linda Jati Kusumawardani, Ronaldo Juniansyah

Makara Journal of Science

Using biomass as an energy source helps overcome the declining supply of fossil fuels. Bio-pellets—an energy product made from biomass—is one option that can be utilized. One source of biomass energy is walnut kernel shells. The walnut plant (Canarium indicum L.) is a forest tree grown in eastern Indonesia. The walnut plant is also located in the GOR Pajajaran area of Bogor City and has not been utilized for energy production. This study consists of three stages: 1) raw material preparation, 2) bio-pellet production, and 3) bio-pellet characterization in accordance with the Indonesian National Standard (SNI) 8951:2020. Based on …

2d Cuo/Rgo Nanocomposite: A Novel Architecture For Enhanced Cr(Vi) Photo-Reduction, Islam Gomaa, Nasser M. Hosny, Medhat A. Ibrahim

Nanotechnology Research Centre

he urgent need for efficient detoxification of carcinogenic hexavalent chromium (Cr(VI)) in aquatic environments has driven the development of advanced photocatalytic materials. This study presents the synthesis of 2D CuO/reduced graphene oxide (rGO) nanocomposite via probe sonication, designed to synergistically enhance the photocatalytic reduction of Cr(VI) to less toxic Cr(III). The nanocomposite was meticulously characterized using XRD, HRTEM, FESEM, XPS, and UV-Vis diffuse reflectance spectroscopy. Structural analysis confirmed the formation of CuO nanosheets (average size: 396 nm, thickness: 6 nm) integrated with rGO, where the rGO acted as an electron acceptor, mitigating charge recombination. XPS revealed Cu²⁺ in CuO and …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …

Catalytic Innovation For Sustainable Styrene Production: Green Chemistry Strategies Utilizing Octahedral Ruthenium (Ii) Complexes Supported By A Single Bipyridine Ligand, Kennedy G. Musso, Brandon Quillian, Clifford Padgett, Jose Jimenez

College of Graduate Studies: Theses & Dissertations

This study investigates: 1) the synthesis and reactivity of the mono- substituted systems, [κ²-(t-bipy)Ru(NCMe)2(Ph)(PR3)][BArF'] supported by different ancillary ligands PR3 = (P(OCH3)3 and P(CH3)3) and a single bidentate ligand, 4,4′-di-tert-butyl-2,2′-bipyridine (t-bipy), and 2) UV/heat formation of di-PR3 and tri-PR3 systems supported by a single bidentate ligand to better understand the mechanism of styrene production. Utilizing [(η6-p-cymene)RuI(µ-I)]2 (1), the complexes (η6-p-cymene)RuI2(P(OCH3)3) (2) and (η6-p-cymene)RuI2(P(CH3)3) (3) were synthesized and phenylated to produce (η6-p-cymene)RuI(Ph)(PR3) (6; PR3 = P(OCH3)3 and 7; PR3 = P(CH3)3). Complex 4, (η6-p-cymene)RuCl2(P(CH3)3), was also synthesized and phenylated to produce (η6-p-cymene)RuClPh(P(CH3)3) (5) to understand the impact of chloride versus iodine …

Recyclable Composites Prepared From Animal Coproducts And Industrial Waste Sulfur, Perla Y. Sauceda-Oloño

All Dissertations

Pursuing sustainable and environmentally friendly materials has become a significant objective in materials science, particularly flame retardants and construction materials. This dissertation explores the development and evaluation of novel composites and high sulfur-content materials (HSMs) as potential alternatives to conventional, environmentally harmful materials.

Chapter one reviews recent advancements in environmentally benign flame-retardant additives, highlighting the potential of bio-derived phenols, polysaccharide derivatives, and greener phosphorus sources. The review discusses how green additives can enhance the flame retardancy, thermal stability, and smoke suppression properties of various polymers while addressing the challenges and future directions in the field.

Chapter two investigates the production …

Thin-Film Nanocomposite Membranes With Alumina Nanoparticles For Textile Wastewater Treatment Applications, Amr Mohamed Tayel

Theses and Dissertations

Thin-film nanocomposite (TFN) membranes are gaining great interest in industrial wastewater treatment due to their superior performance, especially for higher water flux and pollutants’ rejection, as well as improved chemical, thermal and mechanical stabilities, compared to other types of membranes. The performance of TFN membranes can be enhanced using different types of nanofillers, among which ceramic nanomaterials, such as Al2O3, offer a promising potential for applications involving treatment of industrial wastewater such as textile effluents, and this is due to their stability, hydrophilicity, and relative low cost. The study of the TFN membrane properties and structure allows the optimization and …

The Surface Chemistry And Binding Interactions Of Lignin With Polymer-Encapsulated Gold Nanoparticles Acting As Model Microplastics, Oluwaseun Ayodeji Akinsola

All Master's Theses

This study investigates the surface chemistry and molecular-level interactions between lignin, a special type of natural organic matter, and polymer-capped gold nanoparticles, shedding light on the strength of adsorption between lignin and nanoscale polymer surfaces. Specifically, the study presents a variety of nanoscale polymer surfaces displaying different charged functional groups, using layer-by-layer assembly of three polyelectrolytes (polyallylamine hydrochloride (PAH)), polyacrylic acid (PAA), and poly(diallyldimethylammonium chloride (PDADMAC)) on 90 nm citrate-stabilized gold nanoparticles (AuNPs). This approach provides a library of polymer-encapsulated AuNPs for investigating the binding interactions of lignin to nanoscale polymers via spectroscopic techniques. ζ-potential, dynamic light scattering (DLS), …

Synthesis, Functionalization, And Application Of Polymeric Membrane Blends Of Polysulfone, Poly-Ether Ether-Ketone, And Natural Fiber Additive Biochar For Optimal Water Treatment., Abelline Katusiime Fionah

Theses and Dissertations--Chemistry

According to the Center for disease control (CDC), an estimated 1.7 to 2.2 million persons die from waterborne diseases annually. The majority of individuals dying from diseases resulting from unsafe drinking water, such as diarrhea and gastroenteritis, are children. This has in turn created a global water crisis. Different methods have been developed to treat contaminated water in response to the global water crisis such as adsorption, filtration, ozonolysis, catalysis, etc. Of the methods available, filtration via polymeric membranes has been one of the most successfully applied. A membrane is a thin semi-permeable barrier (often made of a polymer) used …

Conversion Of Cellulose To 5-Hydroxymethylfurfural As Sustainable Energy: A Bibliometric Analysis By Vosviewer, Royyan Faradis, Ardiansyah Bagus Suryanto, Irmina Kris Murwani

Journal of Environmental Science and Sustainable Development

The developments of the global economy and society impact resources and the environment. This condition requires an alternative to find new, safe, and sustainable energy types. The conversion of cellulose to 5-hydroxymethylfurfural (5-HMF) has become a significant area of research interest. It has triggered the development of research directions related to biomass and energy because it can be an intermediary source for making polymers, solvents, pharmaceuticals, and biofuels. The primary objective of this study is to give a bibliometric analysis of 1753 reports on the development of research on cellulose conversion to 5-HMF from 1965 to 2021. The data were …

Electrochemical Degradation Of Methylene Blue With Seawater And Pb/Pbo2 Electrodes From Battery Waste, Gunawan Gunawan, N. B. Adiwibawa Prasetya, Didik Setiyo Widodo, Roni Adi Wijaya

Karbala International Journal of Modern Science

Electrochemical degradation of methylene blue (MB) dye with seawater electrolyte using lead and lead oxide (Pb/PbO2) electrodes from waste batteries has been successfully conducted. Characterization of battery waste, the effectiveness of dye degradation, sodium hypochlorite (NaOCl) concentration, dissolved oxygen (DO) level, reaction mechanism, the effect of time variation (15, 30, 45, and 60 minutes), and voltage variation (0, 1, 2, 3, 4, and 5 volts) were observed. Characterization showed results by the characteristics of Pb and PbO2 confirmed by X-ray diffractometer (XRD) result-ing in 2θ peaks of Pb at 31.36, 36.38, 52.26, 62.36, 65.38º and 2θ (β-PbO2) at 25.4, 32.0, …

Developing Strategies For The Integration Of Metal–Organic Frameworks (Mofs) Into E-Textiles For Chemical Sensing, Filtration, And Detoxification, Aileen Mary Eagleton

Dartmouth College Ph.D Dissertations

Metal-organic frameworks (MOFs) are crystalline porous materials that offer modularity through diverse combinations of metal nodes and linkers, as well as tailorable surface chemistry and structure, along with tunable conductivity. The integration of these framework materials onto fibers can result in robust and flexible MOF-based textiles with enhanced functionality and applicability. This thesis illustrates the versatility of multifunctional MOF-integrated textile systems, showcasing their unique properties and the advantages of installing MOFs at the fiber level.

Integrating Sensor Development, Risk Assessment, And Community Engagement To Support Environmental Justice In The Rural Community Of El Tiple, Colombia, David Bahamon Pinzon

All Dissertations

In Colombia, ethnic communities have traditionally been responsible stewards of natural resources. They recognize the importance of these resources for their livelihood, as well as their ancestral and cultural heritage. El Tiple, a rural Afro-Colombian community, has been affected by the incursion of private corporations that promoted the expansion of sugarcane monocrops in their territory. Since the introduction of the monoculture industry, local freshwater sources have been depleted due to intensive water use for irrigation of the sugarcane crops. Additionally, the intensive usage of agrochemicals has been linked with loss of native flora, damages to family farms, and pollution of …

Composite And Polymer Formulation Employing Sulfur And Bio-Olefin Feedstocks, Claudia V. Lopez

All Dissertations

Environmental sustainability represents a challenge for society since industrial growth has a direct impact on natural resources and waste production. New technologies that effectively incorporate waste into renewable resources are critical to the development of a sustainable and circular economy. The manufacturing of structural materials like Portland cement (OPC) is responsible for >8% of the global anthropogenic emissions of carbon dioxide, with ~ 1 kg of CO₂ released to the atmosphere for every kilogram of OPC produced. For instance, the development of sustainable structural materials is a key factor to reduce the greenhouse emissions and to attenuate the climate …

Tio2 Crystallization At Room Temperature And Preparation Of Transparent Carbon Counter Electrode For Low-Cost Dye-Sensitized Solar Cells, Muhammad Iqbal Syauqi, Afiten Rahmin Sanjaya, Mohammad Jihad Madiabu, Munawar Khalil, Jarnuzi Gunlazuardi

Makara Journal of Science

We developed a low-cost dye-sensitized solar cell (DSSC) using TiO₂ fabricated via rapid breakdown anodization (RBA) and ultrafast room-temperature crystallization (URTC). The prepared TiO₂ was deposited on a self-made fluorine-doped tin oxide (FTO) conductive glass, and the FTO/TiO₂ system was sensitized using curcumin dye. The DSSC was constructed by sandwiching the FTO/TiO₂/curcumin electrode with an I⁻/I₂ electrolyte and a transparent carbon counter electrode prepared using a liquid–liquid interface system. The characterization results showed that the TiO₂ freshly prepared via URTC was transformed into an anatase crystalline phase, which exhibited a 3.10 …

The Effect Of The Carbon Nanotubes’ Surface Area On The Morphology And Performance Of Cellulose Acetate Nanocomposite Membranes In Nanofiltration Applications, Nouran Elbadawi

Theses and Dissertations

Population increase and climate change have significantly affected the availability of fresh water for consumption. Studies by UNESCO showed that more than 28% of the world population didn’t have access to clean safe drinking water in 2020. This situation is expected to get more serious over the coming 30 years with the limited availability of natural fresh water sources. The need to find solutions from alternative non-freshwater resources for drinking or irrigation is becoming a necessity. Within the context of desalination technologies, thousands of investigations are conducted to find the cheapest most efficient way of water treatment aiming at expanding …

Biosynthesis Of Copper Nanoparticles Using Hylocereus Costaricensis Peel Extract And Their Photocatalytic Properties, Suriati Eka Putri, Netti Herawati, Ahmad Fudhail, Diana Eka Pratiwi, Sumiati Side, Abd Rahman, Susilo Sudarman Desa, Nur Ahmad, Subaer Junaedi, A. Surleva

Karbala International Journal of Modern Science

A green chemistry method was used for the first time to synthesize copper nanoparticles (Cu-NPs) using CuSO4 as a precursor and red dragon fruit (Hylocereus costaricensis) peel wasted extract as a bio-reductor. Cu-NPs produced were then used as a photocatalysts for acid orange 7 (AO7) dyes degradation. The results showed that the smallest average crystallite size of the products ranged from 8.84 - 8.86 nm, and the FCC crystal structure had a surface area of 244.38-278.85 m2g-1. Furthermore, the optimum degradation of AO7 dye occurred at a ratio of 1:3 with a percentage of 81.07% for four cycles. These findings …

Carbon Dioxide Capture Potential Of Chitosan-Nanocrystalline Cellulose Aerogel Composite Materials: Synthesis, Functionalization, And Characterization, Victor Oghenekohwo

Theses and Dissertations

The carbon dioxide capture technology has been established as an invaluable player in the current global efforts to allay the warming of the planet and climate change. In this connection, the study centers on the valorization of waste organic materials for the application described herein. The sorbents, sourced from a combination of by-products of food processing and agricultural residue waste products, viz. seafood waste and sugarcane bagasse, showed prospects for selective carbon dioxide capture, adsorbing up to 5.78 mg/g of the gas at 273 K and 2.82 mg/g at 298 K, as observed on the Micromeritic ASAP 2020 surface area …

Wetting Transition Of Texturized Surfaces, Jenna Stephens

Williams Honors College, Honors Research Projects

Building on previous research, this project aims to continue the investigation of the wettability of various liquids on a uniform, texturized surface. Different surface energies can impact the wettability of a surface. The surface can be hydrophilic, hydrophobic, or in between. The goal of this project is to research how features of texturized surfaces affect the wetting transition of water, oil, and a mixture of both. Additionally, this project aims to improve the quality of the 3D printed surfaces. The surfaces that will be studied are constructed using UV cured resin 3D printing and are made up of an array …

Development Of An Effective Au:Pd Bimetallic Heterogeneous Catalyst For Oxidative Lignin Depolymerization To Low Molecular Weight Aromatics, Gayan P. Karunasinghe

Theses and Dissertations--Chemistry

The principal concept behind biorefining involves the transformation of lignocellulosic biomass into valuable products and energy resources. Historically, biorefinery strategies for lignocellulosic biomass have primarily focused on improving the conversion of cellulose into ethanol, often neglecting the underutilized lignin component. Lignin consists of phenolic subunits, from which it follows that value-added products can be obtained from lignin depolymerization. Unfortunately, lignin utilization is particularly challenging due to its high structural irregularity and recalcitrance. The goal of this study was to develop an AuPd/Li-Al layered double hydroxide (LDH) bimetallic catalyst for efficient lignin depolymerization, resulting in the production of high-value aromatic compounds. …

Mechanistic Studies Of Co2 Electrochemical Reduction (Co2er) On Cu And Cuo Nanoparticles With In-Situ Atr-Ftir Spectroscopy, Jason Hsu

Theses and Dissertations (Comprehensive)

Global climate change is a major challenge facing the world in the 21st century. This environmental crisis originated from excess amounts of atmospheric carbon dioxide (CO2) released from burning fossil fuels. One promising remediation method to decrease atmospheric CO2 levels is called carbon dioxide electrochemical reduction (CO2ER). In CO2ER, the CO2 gas undergoes chemical reduction to other hydrocarbon fuels. For CO2ER to take place, an energy source and a catalyst are needed. In this thesis, three aspects of CO2ER were investigated using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy coupled with other surface sensitive characterization tools. First, we studied …

Functionalized Biochar Electrodes For Asymmetric Capacitive Deionization, Hellen Stephanie

Theses and Dissertations

Electrosorption-based capacitive deionization (CDI) has become a viable process for brackish water desalination and defluoridation. In this study, activated Douglas fir biochar is used as a low-cost electrode material with adsorption capacity comparable to activated carbon obtained from biomass precursors. Adding functional groups to the activated biochar enhanced salt removal capacity, providing cation and anion selectivity. The functionalized electrodes were prepared by Nafion, titanium isopropoxide, and p-phenylenediamine treatment, respectively, which introduced sulfonate, titanium dioxide and amine functional groups to the electrode surface. These modification methods are versatile and can be easily performed without sophisticated laboratory environment. Modified biochar electrodes …

Synthesis And Characterization Of A Novel Reaction-Based Azaborine Fluorescent Probe Capable Of Selectively Detect Carbon Monoxide Based On Palladium-Mediated Carbonylation Chemistry, Samuel Moore, Carl Jacky Saint-Louis

Symposium of Student Scholars

Azaborines are fascinating compounds because they possess valuable properties such as photochemical stability, have high molar absorption coefficient and high fluorescent quantum yields, as well as large Stokes shifts and tunable absorption/emission spectra. Here, we designed, synthesized, and will examine a novel reaction-based azaborine fluorescent probe capable of selectively detect carbon monoxide (CO) based on palladium-mediated carbonylation chemistry. This novel azaborine fluorescent probe will exhibit high selectivity for CO and display a robust turn-on fluorescent response in the presence of CO in aqueous buffer solution.

Limits Of Detection Of Mycotoxins By Laminar Flow Strips: A Review, Xinyi Zhao, Hugh Byrne, Christine M. O’Connor, James Curtin, Furong Tian

Articles

Mycotoxins are secondary metabolic products of fungi. They are poisonous, carcinogenic, and mutagenic in nature and pose a serious health threat to both humans and animals, causing severe illnesses and even death. Rapid, simple and low-cost methods of detection of mycotoxins are of immense importance and in great demand in the food and beverage industry, as well as in agriculture and environmental monitoring, and, for this purpose, lateral flow immunochromatographic strips (ICSTs) have been widely used in food safety and environmental monitoring. The literature to date describing the development of ICSTs for the detection of different types of mycotoxins using …