Computational Chemistry Commons^™

Automated Workflow For Redox Potentials And Acidity Constants Calculations From Machine Learning Molecular Dynamics, Feng Wang, Jun Cheng

Journal of Electrochemistry

Redox potentials and acidity constants are key properties for evaluating the performance of energy materials. To achieve computational design of new generation of energy materials with higher performances, computing redox potentials and acidity constants with computational chemistry have attracted lots of attention. However, many works are done by using implicit solvation models, which is difficult to be applied to complex solvation environments due to hard parameterization. Recently, ab initio molecular dynamics (AIMD) has been applied to investigate real electrolytes with complex solvation. Furthermore, AIMD based free energy calculation methods have been established to calculate these physical chemical properties accurately. However, …

Measurements Of Rate Constant For Electrode Reactions, Lian-Huan Han, Jia-Yao Guo, Miao-Miao Cui

Journal of Electrochemistry

Standard electron-transfer rate constant is one of the intrinsic properties for an electrochemical reaction, which is significant in the study of electrode kinetics. It is a key criterion for one to clarify the mechanism and pathway of a specific electrochemical reaction, and to screening and design the electrocatalysts and battery materials. Herein, we will introduce the measuring methods of rate constant for electrode reactions, including polarization curve, rotating disk electrode, ultramicroelectrode, scanning electrochemical microscopy, electrochemical impedance spectroscopy, current step, potential step and cyclic voltammetry, etc., to provide a guide to investigate electrode kinetics for graduate students and researchers in the …

Joint Time-Frequency Analysis: Taking Charge Penetration Depth And Current Spatial Distribution In The Single Pore As An Example, Nan Wang, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jiu-Jun Zhang

Journal of Electrochemistry

In recent years, joint time-frequency analysis has once again become a research hotspot. Supercapacitors have high power density and long service life, however, in order to balance between power density and energy density, two key factors need to be considered: (i) the specific surface area of the porous matrix; (ii) the electrolyte accessibility to the intra-pore space of porous carbon matrix. Electrochemical impedance spectra are extensively used to investigate charge penetration ratio and charge storage mechanism in the porous electrode for capacitance energy storage. Furthermore, similar results could be obtained by different methods such as stable-state analysis in the frequency …

Rational Design Of Peptide-Based Materials Informed By Multiscale Molecular Dynamics Simulations, Dhwanit Rahul Dave

Dissertations, Theses, and Capstone Projects

The challenge of establishing a sustainable and circular economy for materials in medicine and technology necessitates bioinspired design. Nature's intricate machinery, forged through evolution, relies on a finite set of biomolecular building blocks with through-bond and through-space interactions. Repurposing these molecular building blocks requires a seamless integration of computational modeling, design, and experimental validation. The tools and concepts developed in this thesis pioneer new directions in peptide-materials design, grounded in fundamental principles of physical chemistry. We present a synergistic approach that integrates experimental designs and computational methods, specifically molecular dynamics simulations, to gain in-depth molecular insights crucial for advancing the …

Analyzing Novel Metal Alloys For Glucose Sensing And Electrocatalysis, Anna Grace Boddy

Theses and Dissertations

In pharmaceutical and medicinal chemistry, metals and metal alloys often receive less attention compared to biological or organic compounds due to many factors including toxicity in the body for drug development or the cost of these metals. However, metals can play an important role in pharmaceuticals, having an impact on original cancer drugs, such as platinum used for head and neck tumors. Electrocatalysis is also another topic that receives less attention over topics such as chromatography in pharmaceuticals due to its potential toxic catalysts and voltages that could be harmful to the body. Electrocatalytic sensors can play an important role …

Corrosion Inhibitors: Mitigating The Degradation Of Rebar, Jake R. Hughes

Williams Honors College, Honors Research Projects

Our conjecture was twofold: first, that two compounds historically used as food preservatives could act as environmentally friendly inhibitors against rebar corrosion, and second, that molecular properties have a quantifiable influence on inhibition efficiency (%IE). To evaluate the two compounds, cyclic potentiodynamic polarization was used to determine corrosion current density (i_corr) and %IE. The “green” inhibitor candidates included sodium metabisulfite and ascorbic acid, which yielded maximum %IE values of -123900% and 91%, respectively. Results indicated that sodium metabisulfite is not a suitable inhibitor, while ascorbic acid showed potential to extend reinforced concrete’s design life without posing health or …

Charge-Dependence Of Dissolution/Deposition Energy Barrier On Cu(111) Electrode Surface By Multiscale Simulations, Hang Qiao, Yong Zhu, Sheng Sun, Tong-Yi Zhang

Journal of Electrochemistry

Behaviors of electrified interface under different applied potentials/charges play the central role in electroplating process and electrochemical corrosion. The mechanism, however, is unclear yet for a surface atom dissolving/depositing from/on an electrode surface under an applied potential. The energy barrier along the reaction path is the key variable. The present work conductes hybrid first-principle/hybrid calculations to study the direct and indirect dissolution/deposition of a Cu atom on perfect/stepped Cu(111) planar electrodes in an electrolyte under different excess charges. Energy profiles present a linear relationship between the energies of the initial/final state and the activation state of different reaction paths under …

Deciphering The Role Of Molecular Interactions On The Interfacial Structure Of Aqueous And Non-Aqueous Interfaces, Dodangodage Ishara Indunil Senadheera, D I. Senadheera

LSU Doctoral Dissertations

The study focused on "Deciphering the role of molecular interactions on the interfacial structure of aqueous and non-aqueous interfaces" holds immense significance in diverse scientific and industrial domains. Our primary objective is to unravel the intricate web of molecular interactions occurring at the boundaries between aqueous and non-aqueous phases. The research presented here spans a wide scope, encompassing applications in microelectromechanical systems in the semiconductor industry, energy-efficient membranes for electrochemical separations, and renewable energy storage systems. Molecular dynamics simulations were conducted in collaboration with experimental studies, specifically atomic force microscopy, to achieve insights at the molecular level.The first project centered …

N–((2–Acetylphenyl)Carbamothioyl)Benzamide: Synthesis, Crystal Structure Analysis, And Theoretical Studies, Akin Oztaslar, Hakan Arslan

Karbala International Journal of Modern Science

N–((2–Acetylphenyl)carbamothioyl)benzamide has been synthesized and characterized. The molecular conformation of the investigated compound is stabilized by C16–H16B⋅⋅⋅O2ⁱ (i: 1+x, y, z) intermolecular and C14–H14⋅⋅⋅S1, N2–H2⋅⋅⋅O2, and N2–H2⋅⋅⋅O1 intramolecular H–bonds. All DFT calculations have been implemented at the B3LYP level with the 6–311G(d,p) basis set. The optimized molecular structure parameters have been compared with the experimental one in the solid phase. The energy gap, global chemical reactivity descriptor parameters, MEP, Fukui functions, DoS, NLO, and NBO analysis were also computed and investigated. The intermolecular interactions and their energies are evaluated using Hirshfeld surface and energy framework analyses. To determine …

Pyrrolopyrrole-Based Materials For High-Contrast Electrochromics, Allison Marie Hawks

Master of Science in Chemical Sciences Theses

Understanding structure-property relationships of underutilized p-conjugated chromophores is an important task for the continued discovery of materials that will find utility in organic electronic applications. Dihydropyrrolo[3,2-b]pyrroles (DHPPs) are synthetically simple and highly tailorable chromophores that can be decorated with diverse functionalities that readily manipulate optoelectronic properties useful for a variety of applications. However, a thorough understanding of how these functionalities influence properties of DHPPs that will be useful in applications such as electrochromism is unknown. Motivated to exploit the synthetic simplicity and tailorability of DHPPs, a family of DHPP chromophores was synthesized to probe how functionality and connectivity …

Using Superatomic Clusters And Charge Transfer Ligands To Control Electronic Characteristics Of Phosphorene Nanoribbons And Phosphorene Monolayer, Ryan Lambert

Theses and Dissertations

Phosphorene is a two-dimensional electron poor p-type semiconductor with high carrier mobility and great promise for applications in electronics and optoelectronics. As the main theme in this dissertation, the following work represents different investigations of various electronic properties associated with phosphorene. Most notable are the findings on charge transfer doping with metal-chalcogenide superatoms which displays novel control of the two most important properties of a semiconductor – the band gap energy and the nature of carriers. By tuning the width of the gap and p-/n-type character of conduction, we gain control over a material’s capacity to play a certain role …

Exploration And Synthesis Of Half-Heusler And Disordered Ternary Intermetallic Single Crystals, Md Fahel Bin Noor

Graduate Theses/Dissertations

Due to their distinct physical and chemical characteristics, half-Heusler compounds are intermetallic materials that have undergone substantial research. The general formula for these compounds is XYZ, where X and Y are transition metals and Z is a p-block element. Thermoelectricity is among the half-Heusler compounds' most exciting potential uses, but additional possible applications include spintronics, magnetic refrigeration, and superconductivity, among others. Recently, half-Heuslers (and Heuslers) have emerged as candidates for catalysts for hydrogenation. The CoNbSn half-Heusler compound, as well as another unique intermetallic ternary compound, the disordered Mn_4-xCr_xAl₁₁, were successfully grown as single crystals …

Computational Investigation Of The Ionization Potential Of Lead Sulfide Quantum Dots, Jessica Beyer

Scripps Senior Theses

The purpose of this work was to determine the impact of quantum dot size on ionization potential and to determine how the presence of carbonyl-based ligands affect the ionization potential of lead sulfide quantum dot systems. Ionization potential (IP) is defined as the energy required to remove an electron from an atom, molecule, or material. IP helps scientists determine how reactive the material of interest is, which is crucial information when manufacturing nanomaterials. Accurate quantum chemical calculations of ionization potential are challenging due to the computational cost associated with the numerical solution of the Dyson equation. In this work, the …

Molecular Understanding Of Zwitterions And Quantum Computing For Sustainability, Manh Tien Nguyen

Theses and Dissertations--Chemical and Materials Engineering

The sustainable development of society needs sustainable energy solutions and the mitigation of greenhouse gas emissions. One key subject in this area is the development of safe and efficient ion-based batteries. Moreover, CO₂ capture is a crucial pathway in mitigating emissions from the combustion of fossil fuels. Ongoing efforts are to improve both technologies' safety and efficiency. This thesis presents our efforts to conduct computational research on understanding advanced zwitterionic electrolytes and CO₂ capture. Chapters 2-4 illustrate the computational research to understand ionic solvation in zwitterionic electrolytes. Solid-state electrolytes are essential for safer batteries. While solid polymer electrolytes …

Translating Chemistry, Structure, And Processing To The Solid-State Morphology And Function Of Organic Semiconductors Through Computational Modeling And Simulations, Chamikara D. Karunasena

Theses and Dissertations--Chemistry

The immense synthetic design space and material versatility have driven the exploration and development of organic semiconductors (OSC) over several decades. While many OSC designs focus on the chemistries of the molecular or polymer building blocks, a priori, multiscale control over the solid-state morphology is required for effective application of the active layer in a given technology. However, molecular assembly during solid-state formation is a complex function interconnecting the building block chemistry and the processing environment. Insufficient knowledge as to how these aspects engage, especially at the atomistic and molecular scales, has so far limited the ability to predict …

Developing And Deploying Data-Driven Tools For Accelerated Design Of Organic Semiconductors, Vinayak Bhat

Theses and Dissertations--Chemistry

Organic semiconductors have gained widespread attention due to their potential applications in flexible, low-cost, lightweight electronics, energy storage and generation technologies, and sensing applications. However, developing new organic semiconductors with improved performance remains a significant challenge due to the vast chemical space of possible molecular and materials structures. Furthermore, the high cost and time-consuming nature of experimental synthesis and characterization hinder the rapid discovery of new materials. To overcome these challenges, this dissertation presents a data-driven approach to organic semiconductor discovery. The primary focus of this work is the development of data-driven tools, namely machine learning models, to predict critical …

Water-Soluble Palladium, Copper, And Nickel Catalysts And Their Formation In Ligand-Free Suzuki-Miyaura Cross-Coupling Reactions, Priya Karna

Theses and Dissertations--Chemistry

Transition-metal catalyzed Suzuki-Miyaura (SM) cross coupling is a powerful synthetic method for constructing carbon-carbon and carbon-heteroatom bonds in designing organic compounds, agrochemicals, pharmaceuticals, and precursors for materials. However, the nature of catalysis and identity of the transition metal catalysts used in these reactions remain under debate or unknown. This dissertation reports the studies of three metals: Pd, Cu, and Ni. Pd-nanocluster catalysts and their formation in ligand-free SM reactions with Pd(II) nitrate as a precatalyst was investigated. The catalysts are water-soluble neutral Pd tetramer and trimer in their singlet electronic states as identified by UV-Vis absorption spectroscopy and are formed …

First Principles Calculations To Investigate Surface And Catalytic Properties Of Materials For Green Energy Generation, Keerthan Raghavendra Rao

Theses and Dissertations--Chemistry

Climate change due to greenhouse gas build up in the earth’s atmosphere is an existential threat to humanity. To mitigate climate change, a significant shift from fossil fuels is necessary. Over the years, several renewable energy sources like solar, wind, geothermal etc. have been explored with the aim providing carbon-free energy. In this work, we focus on using density functional theory (DFT) methods to investigate key functional properties of materials of interest for applications in solar cells and catalytic conversion for energy generation. We show geometric effects of carboxylic acid binding on a transition metal surface to impact the deoxygenation …

Elucidation Of Active Site And Mechanism Of Metal Catalysts Supported In Nu-1000, Hafeera Shabbir

All Dissertations

Advances in extraction of shale oil and gas has increased the production of geographically stranded natural gas (primarily consisting of methane (C1) and ethane (C2)) that is burned on site. A potential utilization strategy for shale gas is to convert it into fuel range hydrocarbons by catalytic dehydrogenation followed by oligomerization by direct efficient catalysts. This work focuses on understanding metal cation catalysts supported on metal-organic framework (MOF) NU-1000 that will actively and selectively do this transformation under mild reaction conditions, while remaining stable to deactivation (via metal agglomeration or sintering). I built computational models validated by experimental methods to …

Perfect Polar Alignment Of Parallel Beloamphiphile Monolayers: Synthesis, Characterization, And Crystal Architectures Of Unsymmetrical Phenoxy-Substituted Acetophenone Azines, Harmeet Bhoday, Michael Lewis, Steven P. Kelley, Rainer Glaser

Chemistry Faculty Research & Creative Works

It remains a great challenge to achieve polar order in organic molecular crystals because anti-parallel alignment of side-by-side molecules is intrinsically preferred. We have addressed this problem with a rational design that focuses on the polar stacking of parallel beloamphiphile monolayers (PBAMs) with strong lateral quadrupole-quadrupole attractions. We employ arene-arene interactions as lateral synthons. The first successes were achieved with unsymmetrical donor (X), acceptor (Y) substituted acetophenone azines which form polar PBAMs with double T-contacts between the azines. Near-perfect alignment was achieved with the methoxy series of (MeO, Y)-azines with Y=Cl, Br, I. Here, we report on the synthesis, the …

Understanding Dynamics Of Polymers Under Confinement: A Molecular Dynamics And Neutron Scattering Study, Supun Samindra Kamkanam Mohottalalage

All Dissertations

The current study probes the structure, dynamics, and rheological behavior of associating polymers including ionomers in melts and solutions as well as conjugated polymers confined into nanoparticles, using molecular dynamics (MD) simulations and neutron scattering techniques. The study focuses on two families of associative polymers, ion containing macromolecules and conjugated polymers.

Polymers that consist of ionizable groups along their backbone found uses in a broad range of applications. Examples include light weight energy storage and generation systems, and biomedical applications, where the polymers act as ion exchange membranes, and actuators. The ionic groups tend to form clusters that are in …

Understanding Interfacial Reactions Initiating On Electrode Materials For Energy Storage Technologies, Jingnan Li

Graduate Theses and Dissertations

Since the first generation of lithium-ion batteries featured lithium cobalt oxide cathode and carbon anode commercialized in the 1990s, the high-capacity materials with lower cost are in demand to further increase the battery energy density. Lithium metal and silicon anode are promising high-capacity anode materials to achieve next-generation lithium batteries. However, both the materials actively react in electrolytes and suffer from dramatic volume change. Therefore, a reliable passivation layer at the electrolyte/electrode interphase (i.e., solid electrolyte interphase, or “SEI”) is required to support the long-term cycling of both materials. Cetrimonium hydro fluoride (CTAHF2) has been proposed and synthesized as an …

Multi-Scale Simulation Revealing The Decomposition Mechanism Of Electrolyte On Lithium Metal Electrode, Yan-Yan Zhang, Yue Liu, Yi-Ming Lu, Pei-Ping Yu, Wen-Xuan Du, Bing-Yun Ma, Miao Xie, Hao Yang, Tao Cheng

Journal of Electrochemistry

Lithium metal is considered as an ideal anode material for next-generation high energy density batteries with its high specific capacity and low electrode potential. However, the high activity of lithium metal can lead to a series of safety issues. For example, lithium metal will continuously react chemically with the electrolyte, forming unstable the solid electrolyte (SEI) films. In addition, lithium dendrites can be formed during cycling, which can puncture the SEI film and cause short circuits in the battery. These drawbacks greatly hinder the commercial application of lithium metal. To solve the above problems, it is important to understand the …

Synthesis And Characterization Of A Novel Reaction-Based Azaborine Fluorescent Probe Capable Of Selectively Detect Carbon Monoxide Based On Palladium-Mediated Carbonylation Chemistry, Samuel Moore, Carl Jacky Saint-Louis

Symposium of Student Scholars

Azaborines are fascinating compounds because they possess valuable properties such as photochemical stability, have high molar absorption coefficient and high fluorescent quantum yields, as well as large Stokes shifts and tunable absorption/emission spectra. Here, we designed, synthesized, and will examine a novel reaction-based azaborine fluorescent probe capable of selectively detect carbon monoxide (CO) based on palladium-mediated carbonylation chemistry. This novel azaborine fluorescent probe will exhibit high selectivity for CO and display a robust turn-on fluorescent response in the presence of CO in aqueous buffer solution.

Ketal-Azaborine Versus Ketal-Azaborine With A Spacer: Structural Effects On The Photophysical Properties Of Tunable Heteroaromatic Polycyclic Chromophores, Albert Campbell, Janiyah Riley, Samuel Moore, Albert Campbell

Symposium of Student Scholars

Flat-structured heteroaromatic polycyclic compounds with extended conjugated π-systems such as azaborines are in high demand in the material and imaging technology markets because of their unique features such as simultaneous tunability of fluorescence color and intensity. We have designed, synthesized, and investigated a series of novel conjugated thermally stable ketal-azaborine chromophores that contain a phenyl ring as a spacer between electronic moieties and the ketal-azaborine core as easily tunable high-luminescent organic materials. We investigated the impact of the phenyl spacer on the ketal-azaborine unit. We examined the structural effects on their photophysical properties by incorporating electron –donating and –withdrawing substituents …

Azaborine Versus Azaborine With A Spacer: Structural Effects On The Photophysical Properties Of Tunable Azaborine Chromophores, Kaia Ellis, Janiyah Riley, Lyric Gordon, Janiyah Riley

Symposium of Student Scholars

Azaborines are fascinating compounds because of their valuable and interesting optical properties making them suitable to be utilized in many optoelectronic devices. We have designed, synthesized, and investigated a series of novel conjugated thermally stable azaborine chromophores by incorporating a phenyl ring as a spacer linking the chromophore to different electronic moieties as easily tunable high-luminescent organic materials. We investigated the effect of the phenyl spacer on the azaborine unit. The substituent effects of different electronic moieties were investigated by the insertion of electron –withdrawing and –donating moieties to the phenyl spacer. We examined the role of the electron –donating …

Recent Advances In Electrochemical Kinetics Simulations And Their Applications In Pt-Based Fuel Cells, Ji-Li Li, Ye-Fei Li, Zhi-Pan Liu

Journal of Electrochemistry

Theoretical simulations of electrocatalysis are vital for understanding the mechanism of the electrochemical process at the atomic level. It can help to reveal the in-situ structures of electrode surfaces and establish the microscopic mechanism of electrocatalysis, thereby solving the problems such as electrode oxidation and corrosion. However, there are still many problems in the theoretical electrochemical simulations, including the solvation effects, the electric double layer, and the structural transformation of electrodes. Here we review recent advances of theoretical methods in electrochemical modeling, in particular, the double reference approach, the periodic continuum solvation model based on the modified Poisson-Boltzmann …

Theoretical Investigation On Optical Properties Of 2d Materials And Mechanical Properties Of Polymer Composites At Molecular Level, Geeta Sachdeva

Dissertations, Master's Theses and Master's Reports

The field of two-dimensional (2D) layered materials provides a new platform for studying diverse physical phenomena that are scientifically interesting and relevant for technological applications. Theoretical predictions from atomically resolved computational simulations of 2D materials play a pivotal role in designing and advancing these developments. The focus of this thesis is 2D materials especially graphene and BN studied using density functional theory (DFT) and molecular dynamics (MD) simulations. In the first half of the thesis, the electronic structure and optical properties are discussed for graphene, antimonene, and borophene. It is found that the absorbance in (atomically flat) multilayer antimonene (group …

From Evaluating The Performance Of Approximations In Density Functional Theory To A Machine Learning Design, Pedram Tavazohi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Density-functional theory (DFT) has gained popularity because of its ability to predict the properties of a large group of materials a priori. Even though DFT is exact, there are inaccuracies introduced into the theory due to the approximations in the exchange-correlation (XC) functionals. Over the 50 years of its existence, scientists have tried to improve the design of the XC functionals. The errors introduced by these functionals are not consistent across all types of solid-state materials. In this project, a high throughput framework was utilized to compare the theoretical DFT predictions with the experimental results available in the Inorganic Crystal …

Cyclic Voltammetric Simulations On Batteries With Porous Electrodes, Xue-Fan Cai, Sheng Sun

Journal of Electrochemistry

Lithium-ion batteries (LIBs) are among the most widely used energy storage devices. Whole-cell modeling and simulations of LIBs can optimize the design of batteries with lower costs and higher speeds. The Pseudo-Two-Dimensional (P2D) electrochemical model is among the most famous whole-cell models and widely applied in LIB simulations. P2D model consists of a series of kinetic equations to model Li⁺/Li diffusion in working/counter electrodes and electrolytes, which are filled in the porous electrodes and separator, and reactions at the interface of electrolyte and active particles. The traditional applications of P2D model, however, are limited to the cases where …