Computational Chemistry Commons^™

The Investigation Of The Reaction Of 2,3-Dimethylfuran With O(³P) And The Estimate Of The Photoionization Cross Section Of C-Cl And Absolute Photoionization Cross Sections Of Chlorinated Organic Compounds, Yilan Lori Chen

Master's Theses

The work presented in this thesis focuses on gas-phase reactions, which are fundamental for reducing greenhouse gas emissions and mitigating climate change. The experiments are performed at the Advanced Light Source (ALS) of Lawrence Berkeley National Laboratory, where there is a time-of-flight mass spectrometer coupled with tunable synchrotron radiation at Beamline 9.0.2 to collect high-quality data.

Chapter 1 details the background and purpose of each project, along with an overview of the origins of synchrotron radiation and time-of-flight mass spectrometry. The adaptation of biofuels is a way to minimize carbon emission and air pollutants, so research surrounding the reaction dynamics …

Design And Application Of Smart Systems To Address Analytical Problems, Lucas B. Ayres

All Dissertations

This dissertation is a multidisciplinary effort that integrates low-cost analytical instrumentation, redox chemistry, and artificial intelligence to overcome existing limitations in the fields of wearable sensing technology, Deep Eutectic Solvents (DES), and antioxidant chemistry. The overall goal behind each implemented strategy is to enhance the accuracy, efficiency, and accessibility of analytical processes and technologies. A general overview of the thesis, along with the research outcomes is included in Chapter One. The theoretical framework of this dissertation is presented in Chapter Two. Chapter Three describes the development of a wearable platform (sensor and instrumentation) to rapidly detect (~20 minutes) S. aureus …

Automated Workflow For Redox Potentials And Acidity Constants Calculations From Machine Learning Molecular Dynamics, Feng Wang, Jun Cheng

Journal of Electrochemistry

Redox potentials and acidity constants are key properties for evaluating the performance of energy materials. To achieve computational design of new generation of energy materials with higher performances, computing redox potentials and acidity constants with computational chemistry have attracted lots of attention. However, many works are done by using implicit solvation models, which is difficult to be applied to complex solvation environments due to hard parameterization. Recently, ab initio molecular dynamics (AIMD) has been applied to investigate real electrolytes with complex solvation. Furthermore, AIMD based free energy calculation methods have been established to calculate these physical chemical properties accurately. However, …

Measurements Of Rate Constant For Electrode Reactions, Lian-Huan Han, Jia-Yao Guo, Miao-Miao Cui

Journal of Electrochemistry

Standard electron-transfer rate constant is one of the intrinsic properties for an electrochemical reaction, which is significant in the study of electrode kinetics. It is a key criterion for one to clarify the mechanism and pathway of a specific electrochemical reaction, and to screening and design the electrocatalysts and battery materials. Herein, we will introduce the measuring methods of rate constant for electrode reactions, including polarization curve, rotating disk electrode, ultramicroelectrode, scanning electrochemical microscopy, electrochemical impedance spectroscopy, current step, potential step and cyclic voltammetry, etc., to provide a guide to investigate electrode kinetics for graduate students and researchers in the …

Experimental And Chemical Modeling Of Applied Dc Electric Field Induced H2 – Air Axisymmetric Laminar Co-Flow Diffusion Flames With Low Carbon Impurities, Susith Dilshan Pathmasiri Gunamuni Halowitage

Graduate Theses, Dissertations, and Problem Reports (ETD)

The effect of externally applied DC electric fields on flame structure was investigated in a stationary atmospheric axisymmetric laminar H₂–Air flame with less than 100 ppm carbon equivalent impurities. Flame OH chemiluminescence signals were recorded using a UV-sensitive CCD array as a function of voltage (+10 to -10 kV) applied to a stainless-steel ring electrode placed around the burner nozzle. Changes in chemiluminescence signal are reported as a function of electrode height above the burner, airflow, and fuel composition. Significant changes in OH* distributions were observed for voltages below -5 kV. Under optimum conditions, the height of the …

Intelligent Control Based On Bp Artificial Neural Network For Electrochemical Nitrate Removal, Xin-Wan Zhang, Guang-Yuan Meng, Li-Qiang Fang, Ding-Ming Chang, Tong Li, Jin-Wen Hu, Peng Chen, Yong-Di Liu, Le-Hua Zhang

Journal of Electrochemistry

Achieving effective control of parameters in the process of nitrate wastewater treatment is critical to electrochemical water treatment. The powerful nonlinear mapping ability, self-adaptation and self-learning ability of neural network technology can optimize the electrochemical processing. However, there are few researches in this direction. Hence, based on the test data of the electrochemical reduction of nitrate, an electrochemical prediction model was established by using the BP neural network algorithm. Considering the correlation of various parameters in the electrochemical process, the reaction time, initial nitrate nitrogen concentration, pH and current density were determined as the input layer of the BP neural …

N–((2–Acetylphenyl)Carbamothioyl)Benzamide: Synthesis, Crystal Structure Analysis, And Theoretical Studies, Akin Oztaslar, Hakan Arslan

Karbala International Journal of Modern Science

N–((2–Acetylphenyl)carbamothioyl)benzamide has been synthesized and characterized. The molecular conformation of the investigated compound is stabilized by C16–H16B⋅⋅⋅O2ⁱ (i: 1+x, y, z) intermolecular and C14–H14⋅⋅⋅S1, N2–H2⋅⋅⋅O2, and N2–H2⋅⋅⋅O1 intramolecular H–bonds. All DFT calculations have been implemented at the B3LYP level with the 6–311G(d,p) basis set. The optimized molecular structure parameters have been compared with the experimental one in the solid phase. The energy gap, global chemical reactivity descriptor parameters, MEP, Fukui functions, DoS, NLO, and NBO analysis were also computed and investigated. The intermolecular interactions and their energies are evaluated using Hirshfeld surface and energy framework analyses. To determine …

Developing Novel Femtosecond Time-Resolved Mass Spectrometry Techniques For Analysis Of Energetic Materials, Shane L. Mcpherson

Theses and Dissertations

Energetic materials and the unimolecular dissociation dynamics attributed to their initiation and subsequent bimolecular detonation have been a subject of interest for defense agencies such as the Department of Defense (DoD) for decades. The timescale in which these initial dynamics exist ranges from several picoseconds to dozens of femtoseconds, necessitating equally fast time-resolved experiments to capture and characterize these events. Our lab specializes in one such laser-based technique: femtosecond time-resolved mass spectrometry (FTRMS). FTRMS is an essentially nondiscriminatory pump-probe laser technique with nearly infinite modifications via pulse shaping, intensity, and wavelength modulation that can readily examine previously undefined dissociation pathways …

Computational And Experimental Investigations Of Alkali Cation Interactions At The Rutile – Water Interface, Isaac Johnston

All Dissertations

Overall, the objective of this dissertation was to investigate the degree of sorption for the alkali cations on rutile to ascertain the impact of different cation properties, such as ion size and charge density, on sorption mechanics as well as probe how the ion may alter the surface – aqueous interface. Initial molecular dynamic simulations and batch experiments showed minimal surface sorption for any alkali cation at relatively low concentrations while simultaneously suggesting the enthalpy of deprotonation shifts slightly in the presence of the alkali cations at different ionic strengths. The cations are likely causing small reorientations of the near-surface …

An Ims-Ms/Md Workflow For Determining Higher Order Structure And Dynamics Of Nucleic Acids, Rebecca D'Esposito

Legacy Theses & Dissertations (2009 - 2024)

Ion mobility spectrometry - mass spectrometry (IMS-MS) has potential for the investigation of structure and dynamics in large biopolymers, which will come to full fruition only with a firmer understanding of how to interpret the experimental data. Numerous studies have employed elements of nucleic acid (NA) secondary structure, such as duplexes and hairpins, to explore the relationships between structure, experimental conditions, and actual observations. When combined with molecular dynamics simulations (MDS), IMS-MS can be effectively employed to perform structural elucidation of biomolecules that are not readily amenable to established techniques employed for structural analysis.

Nitro-Aromatic Polymers For Conversion-Style Battery Cathodic Materials, Brady P. Samuelson

Honors Thesis

The development of organic electrode materials in rechargeable batteries has seen a resurgence in recent decades. This spike in interest is mostly due to the increased investments in renewable energy sources, grid-scale energy storage, and the rapid transition to electric vehicles. Current lithium battery cathode materials typically use some form of lithium metal oxide (specific capacity: 272 mAh g^-1 which has problems with limited capacity, thermal runaway, and an unreliable supply chain. Our research group’s solution involves investigating new lightweight, organic redox groups combined with a conductive polymer backbone to serve as a possible replacement for the cathode in …

Heterogeneous Oxidation Of Multi-Component Aqueous Organic Aerosols: The Effect Of Transport Phenomena And Reaction Compartment On Reaction Kinetics., Tadini Wenyika Masaya

Graduate Theses, Dissertations, and Problem Reports (ETD)

The surface-bulk partitioning of small organic molecules in aqueous droplets was investigated using molecular dynamics. The air-particle interface was modeled using a 80-Å cubic water box containing series of organic molecules and surrounded by gaseous OH radicals. The properties of the organic solutes within the interface and the water-bulk were examined at a molecular-level using density profiles and radial pair distribution functions. Molecules containing only polar functional groups such as urea and glucose are found predominantly in the water bulk, forming an exclusion layer near the water surface. Substitution of a single polar group by an alkyl group in sugars …

Simulation Analysis In Dynamic Performance Of Proton Exchange Membrane Fuel Cell Under Starting Condition, Yan Xiao, Ying-Jie Chang, Wei Zhang, Qiu-Hong Jia

Journal of Electrochemistry

Based on the equivalent circuit model, by considering both the dynamic gas pressure model and the dynamic heat transfer model, a lumped parameter model is developed. The start process of the fuel cell is simulated by using SIMULINK software. The undershoot of the voltage is observed from the simulation results, and the response time of the voltage is basically the same as that of the fuel cell temperature, which indicates that the temperature has great influence on the dynamic performance of the fuel cell. From the perspective of the temperature, the dynamic responses of the thermodynamic potential, the activation overvoltage, …

Surface Chemical Properties Of Mo2C, W2C, Mo2N And W2N Probed With Co, Co2 And O2 Adsorption: A Dft Analysis, Jingyun Ye, Tianyu Zhang, Lingyun Xu, Shuxia Yin, Krishanthi Weerasinghe, Pamela Ubaldo, Ping He, Qingfeng Ge

Journal of Electrochemistry

Transition metal carbides and nitrides are attractive materials for electrodes in many electrochemical energy storage and conversion applications. In the present study, we use density functional theory slab calculations to characterize the surface chemical properties of molybdenum (Mo) and tungsten (W) carbides and nitrides, namely, Mo₂C, W₂C, Mo₂N and W2N with the adsorption of CO, CO₂ and O₂. These probing molecules provide measures of in both acidity/basicity and redox property of for the surfaces of these carbides and nitrides. Our results show that Lewis basic sites were responsible for CO_{2 …}

Cloning And Characterization Of Sas0754, A Hypothetical Protein From Community Associated Staphylococcus Aureus, Unknown Unknown

Symposium 2012

Community associated Staphylococcus aureus (strain MSSA476) is a gram positive cocci capable of infecting many different parts of the body and known to cause serious infections that can be fatal, such as bacterial arthritis and acute endocarditis. To find effective ways of fighting against CA-MRSA strains we must learn more about their ability to infect. The focus of this study was cloning and characterization of a protein referred to as SAS0754. The size of SAS0754 is 340 amino acids and the gene sequence is 1023 nucleotides. The hypothetical function of this protein is that it is an extracellular matrix binding …

A Convenient Synthesis Of 2,6-Dichlorohomonicotinic Acid, Chase Buchanan, Richard W. Fitch

Symposium 2012

In our synthetic efforts toward the alkaloid phantasmidine, we required a convenient source of the title compound. Herein, we describe a short synthesis of 2,6-dichlorohomonicotinic acid by direct allylation of 2,6-dichloropyridine with LDA/allyl chloride, followed by permanganate oxidation of the side chain [figure1]. Yields for the allylation are high, while permanganate oxidation required more adjustment. Successful conditions require the modest acidification of the mixture with acetic acid and cleanup by acid base workup. No chromatography is needed.

Convenient Parallel Synthesis Of Alkyl- And Aryl-S-Tert-Butyl Thiothers, Rebecca Norcross, Jessica Stanfield, Richard W. Fitch

Symposium 2012

While preparing novel cysteine derivatives as oxidation catalysts, we needed S-tert-butylcysteine. We also examined acid-promoted tert-butylation of thiols using tert-butanol as reagent and solvent. While cysteine and aminoethanethiol work well using tBuOH in 4M HCl, other thiols fail in the aqueous environment and aerobic conditions. We examined a variety of aliphatic and aromatic thiols in tBuOH with H2SO4 catalysis and found that argon sparging and the use of 1 eq of acid led to good yields in a parallel format.

Measurement And Wavelet Analysis Of The Electrochemical Noise Of Rebar Steel In Simulated Concrete Pore Solution, Rong-Gang Hu, Chen-Qing Ye, Shi-Gang Dong, Chang-Jian Lin

Journal of Electrochemistry

Electrochemical noise (ECN) measurement can provide information about both corrosion rate and corrosion type while inflicting no perturbation on the studied system. The ECN data of steel rebar in SPS with different amount of Cl-were collected and treated by discrete wavelet transformation to evaluate the contribution from transients in different frequency in the overall signals. Energy distribution plot (EDP) indicated in SPS with 0.0001 mol/L NaCl, the transients with time constant between 16 ～ 32 s were found to be predominant over other processes; while in SPS with higher Cl-concentration, the trend toward active corrosion became the main process. It …

Study On The Electrochemical Impedance Spectroscopy (Eis) Of Al-Bronze At Different Anodic Potentials, Hui Yu, Sa-Ying Dong, Hai-Bo Xu, Ming-Xian Sun

Journal of Electrochemistry

The corrosion dissolution mechanism of Al-bronze has been investigated by Electrochemical Impedance Spectroscopy (EIS) at different anodic potentials. In the active region, the corrosion products are complex compounds of cupreous chloride and the diffusion of CuCl_2^- is the control process of electrochemical reaction. In the transition region, there exhibits two capacitance loops on EIS because CuCl and cupreous oxides films deposit on the electrode surface. In the limiting current region, an inductance loop appears on the EIS because the breakdown of the oxides film leads to serious pit corrosion.