Analytical Chemistry Commons^™

Inkjet-Printed Electrochemical Sensors For Lead Detection, Annatoma Arif

Open Access Theses & Dissertations

This PhD dissertation research has developed a simple, miniaturized, sensitive, selective, reproducible, and disposable 3D (inkjet printed – additive manufacturing technology) gold (Au) plated electrochemical sensor (ECS) on shape memory polymer (SMP) for aqueous lead detection. This technology has shown promising performance in the application of electrochemical sensing (lead (II) detection) due to increased effective electrode surface area (7.25 mm^2 ± 0.15 mm^2) despite miniaturizing lateral surface area (4.19 mm^2). The design, fabrication processes, optimization including bismuth functionalization, evaluation, uncertainty analysis, and cost analysis of the novel SMP based inkjet printed Au plated sensor have been delineated in this manuscript …

Integrating Sensor Development, Risk Assessment, And Community Engagement To Support Environmental Justice In The Rural Community Of El Tiple, Colombia, David Bahamon Pinzon

All Dissertations

In Colombia, ethnic communities have traditionally been responsible stewards of natural resources. They recognize the importance of these resources for their livelihood, as well as their ancestral and cultural heritage. El Tiple, a rural Afro-Colombian community, has been affected by the incursion of private corporations that promoted the expansion of sugarcane monocrops in their territory. Since the introduction of the monoculture industry, local freshwater sources have been depleted due to intensive water use for irrigation of the sugarcane crops. Additionally, the intensive usage of agrochemicals has been linked with loss of native flora, damages to family farms, and pollution of …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

Colorful "Stars" In The Dark, Chao Jing, Yi-Tao Long

Journal of Electrochemistry

Plasmonic nanoparticles such as Au and Ag with localized surface plasmon resonance (LSPR) property exhibit unique scattering and absorption features. The plasmonic scattering and absorption bands are mainly located at visible light region which can be easily applied in visual detections. By modulating the size, shape, and composition of gold and silver colloid solutions, plenty of colorimetric methods have been constructed for the detection of metal ions, biomolecules, and environmental contaminants, etc. For many years, the LSPR-based measurements are implemented in reagent tubes. Since 2000, the plasmon resonance scattering (PRS) light of metal nanoparticles captured by dark-field microscopy enables the …

Recent Advances In Electrochemical Impedance Spectroscopy-Based Pathogenic Bacteria Sensing, Tao Chen, Yuan-Hong Xu, Jing-Hong Li

Journal of Electrochemistry

Pathogenic bacteria have been throwing great threat on human health for thousands of years. Their real-time monitoring is in urgent need as it could effectively halt the spread of pathogenic bacteria and thus reducing the risk to human health. Up till now, diverse technologies such as electrochemistry, optics, piezoelectricity and calorimetry have been developed for bacteria sensing. Therein, electrochemical impedance spectroscopy (EIS)-based sensors show great potential in point-of-care bacterial analysis because of their low-cost, short read-out time, good reproducibility, and portable equipment construction. In this review, we will primarily summarize the typical applications of electrochemical impedance technology in bacteria sensing …

Repeated Low-Level Blast Exposure Alters Urinary And Serum Metabolites, Austin Sigler, Jiandong Wu, Annalise Pfaff, Olajide Adetunji, Paul Ki-Souk Nam, Donald James, Casey Burton, Honglan Shi

Chemistry Faculty Research & Creative Works

Repeated exposure to low-level blast overpressures can produce biological changes and clinical sequelae that resemble mild traumatic brain injury (TBI). While recent efforts have revealed several protein biomarkers for axonal injury during repetitive blast exposure, this study aims to explore potential small molecule biomarkers of brain injury during repeated blast exposure. This study evaluated a panel of ten small molecule metabolites involved in neurotransmission, oxidative stress, and energy metabolism in the urine and serum of military personnel (n = 27) conducting breacher training with repeated exposure to low-level blasts. The metabolites were analyzed using HPLC—tandem mass spectrometry, and the Wilcoxon …

Low-Cost Microstereolithography 3d Printing With Microfluidic Microsampling Applications, Lauren Twombly

Chemistry & Biochemistry Undergraduate Honors Theses

The growing field of stereolithography 3D printing has welcomed a new age ofmicrofluidic device fabrication techniques. When compared to previous planar fabrication techniques such as soft-lithography, stereolithography 3D printing offers highly automated procedures, reduced fabrication times, and greater complexity of device features. To date, the greatest tradeoff for 3D printing in microfluidic device fabrication is poorer resolution when compared to soft-lithography which can produce feature sizes on the nanometer scale. The poorer resolution of 3D printing limits the feasible size of features. While highly sophisticated 3D printers are capable of achieving sub 10 μm resolution, these instruments are incredibly expensive …

Methyl Isobutyrate Production Via Hydrogenation Of Methyl Methacrylate Derived From Pyrolysis Of Acrylic Plastic Waste, Ramzi Nasser Ahmed Saif

Chulalongkorn University Theses and Dissertations (Chula ETD)

According to zero waste and upcycling policy, this work aims to utilize waste polymethyl methacrylate (PMMA) to methyl isobutyrate (MIB) via hydrogenation over nickel (Ni) based catalysts supported on commercial zeolites: HY, H-Beta-27 (SiO2/Al2O3 = 27 by mole), H-Beta-40 (SiO2/Al2O3 = 40 by mole) and H-ZSM-5. The appropriate catalyst support was first screen by using MMA monomer as the substrate for hydrogenation. Under 30 bar initial H2 pressure (PH2) at 250 °C for 3 h, Ni/H-Beta-27 catalyst effectively promoted hydrogenation to achieve 85% MMA conversion with 56.2 wt% MIB yield because of its larger external surface area and pore size. …

3d Printed Microfluidic Devices For Advanced Fluid Manipulation In Biomedical Applications, Kathrine Curtin

Graduate Theses, Dissertations, and Problem Reports (ETD)

Microfluidics are valuable devices in the biomedical field because of their remarkable ability to manipulate small volumes of fluid and facilitate reactions. Microfluidics have several significant advantages, including their portability, low cost, fast reaction times, and high surface area-to-volume ratios. Microfluidics be used for a multitude of applications, including bioanalysis, cellular assays, organ-on-a-chip, and separations. Microfluidics have great potential to overcome many challenges in conventional chemical and biological applications. However, complex fabrication procedures in silicon, glass, thermoplastics, and (polydimethylsiloxane) PDMS devices make rapidly optimizing and prototyping devices challenging. Microfluidic fabrication techniques have been a long-standing challenge in successfully translating these …

Food Waste Storage Gaseous Emissions Detection And Quantification Using Infrared Spectroscopy, Ryley A. Burton-Tauzer

Cal Poly Humboldt theses and projects

A growing interest in sustainable waste management and the implementation of new policies have prompted a shift towards alternative resource recovery methods for organic waste, including food waste. To effectively assess alternative food waste treatment scenarios, it is important to evaluate the life cycle impacts associated with each scenario. The storage phase of food waste, encompassing its accumulation in kitchens, and storage in bins for collection and transportation, has been overlooked as a source of greenhouse gases in previous studies. This investigation aimed to identify the greenhouse gases emitted during the initial five-day period of low-oxygen storage. An open dynamic …

Phosphorus Release And Recovery From Simulated Ferric Wastewater Sludge, Aseel Alnimer

Theses and Dissertations (Comprehensive)

Phosphorus (P) is a fundamental element necessary for all life forms and a key component in the fertilizer industry. Meanwhile, the excessive load of P to water bodies due to human activities has the potential to promote eutrophication. Wastewater treatment plants remove P either biologically or chemically and produce P rich sludge which could be a potential renewable source for P. At present, commercial technologies exist for P recovery from biological wastewater sludge. However, P recovery from chemical sludge particularly iron(III)-phosphate (Fe-P) sludge generated in chemical P removal plants that use iron(III) salts remains a challenge.

This study explored, in …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Ongoing Fragmentation Of The Subducting Cocos Slab, Central America, Tu Xue, Diandian Peng, Kelly H. Liu, Jonathan Obrist-Farner, Marek Locmelis, Stephen S. Gao, Lijun Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Fundamental to plate tectonics is the subduction of cold and mechanically strong oceanic plates. While the subducted plates are conventionally regarded to be impermeable to mantle flow and separate the mantle wedge and the sub slab region, isolated openings have been proposed. by combining new shear wave splitting measurements with results from geodynamic modeling and recent seismic tomography and geochemical observations, we show that the upper ~200 km of the Cocos slab in northern Central America is intensively fractured. the slab there is strong enough to produce typical arc volcanoes and Benioff Zone earthquakes but allows mantle flow to traverse …

The Application Of Photoelectron Spectroscopies In Analyzing The Impact Of Interfacial Energetics On Perovskite Solar Cells, Tuo Liu

Theses and Dissertations--Chemistry

In recent years, organic-inorganic metal halide perovskites (HP) have garnered tremendous attention in photovoltaic research. This attention is attributed to their low cost and excellent optoelectronic properties, including large absorption coefficients, tunable bandgaps, long charge-carrier diffusion lengths, and low densities of deep trap states. Inverted p-i-n architecture perovskite solar cells (PSCs) are of intense interest and are generally regarded as more amenable to low-temperature solution processing. Nevertheless, the development of inverted PSCs is lagging the conventional architecture devices. Imperfect energy level alignments and charge carrier recombination, especially at the interface between perovskite and electron transport layers (ETLs), are two main …

Erratum: New Estimates Of The Magnitude Of The Sea-Level Jump During The 8.2 Ka Event, (Geology (2022), 50(1), (86–90), (10.1130/G49296.1)), Jonathan Obrist-Farner, Mark Brenner, Jeffery R. Stone, Marta Wojewódka-Przybył, Thorsten Bauersachs, Andreas Eckert, Marek Locmelis, Jason H. Curtis, Susan R.H. Zimmerman, Alex Correa-Metrio, Lorenz Schwark, Edward Duarte, Antje Schwalb, Etienne Niewerth, Paula Gabriela Echeverría-Galindo, Liseth Pérez

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

No abstract provided.

Achieving Safe Use Of Advanced Materials In Drinking Water Through Novel Nano Analytics And Enabling Electrification Using Green Catalyst, Kenneth Ray Flores

Open Access Theses & Dissertations

The accumulation of engineered nanomaterials (ENMs) in environmental sectors will continue to increase as more applications are discovered for their unique properties and characteristics. Additionally, the presence of nanomaterials in the environment becomes exacerbated as more consumer products containing nanoparticles are approved for use. It is debated whether the toxic effects of nanoparticles stem from the particles themselves, ionic species, or formation of secondary particles. Therefore, understanding the behavior of nanoparticles in the environment becomes key to discerning the toxicological effects of nanoparticles. Many advancements have been made with ICP-MS to understand the behavior of nanoparticles in the environmental systems, …

Variations In Copper Form Exposure Differentially Modulate Zea Mays (Corn) Physiological Responses, Carolina Valdes Bracamontes

Open Access Theses & Dissertations

In the present study, Zea mays seedlings grown under nano Cu(OH)2 (nCu), bulk Cu(OH)2 (bCu), and ionic CuSO4 (iCu) compound exposure were harvested after six days. The nutritional profile was determined to be significantly disrupted in the roots by 1000 ppm bCu treatment, resulting in a 58.7% reduction in potassium compared to the control. In the shoots, a significant decrease of manganese was observed for 10 and 1000 ppm iCu treatments with 55.7% and 64.2% reductions, respectively. The overall protein content and catalase (CAT) enzymatic activity, however, remained unaffected in either roots or shoots, while an absence of polyphenol oxidase …

Biological Interaction Of Mn-Based Nanomaterials With Capsicum Annuum L. Under Salinity Stress, Yuqing Ye

Open Access Theses & Dissertations

The foliar application of nanomaterials as a method to overcome abiotic stress is relatively new compared to their use as fertilizers or pesticides in agricultural practice. It is also vital to understand the interface between leaf and nanomaterials, as nanomaterials might translocate into crop edible tissues, thus, causing potential toxicity in living beings during food consumption. In this dissertation, salt-stressed Capsicum annuum L was exposed to manganese (Mn) -based nanomaterials (Mn2O3 nanoparticles (MnNPs) and graphene quantum dots doped with Mn (GQD-Mn)) at different stages (seed germination and full life cycle). The dissertation focuses on investigating the mechanism of how Mn-based …

In-Situ/Operando57Fe Mössbauer Spectroscopic Technique And Its Applications In Nife-Based Electrocatalysts For Oxygen Evolution Reaction, Jafar Hussain Shah, Qi-Xian Xie, Zhi-Chong Kuang, Ri-Le Ge, Wen-Hui Zhou, Duo-Rong Liu, Alexandre I. Rykov, Xu-Ning Li, Jing-Shan Luo, Jun-Hu Wang

Journal of Electrochemistry

The development of highly efficient and cost-effective electrocatalysts for the sluggish oxygen evolution reaction (OER) remains a significant barrier to establish effective utilization of renewable energy storage systems and water splitting to produce clean fuel. The current status of the research in developing OER catalysts shows that NiFe-based oxygen evolution catalysts (OECs) have been proven as excellent and remarkable candidates for this purpose. But it is critically important to understand the factors that influence their activity and underlying mechanism for the development of state-of-the-art OER catalysts. Therefore, the development of in-situ/operando characterizations is urgently required to detect key intermediates along …

In Situ Characterization Of Electrode Structure And Catalytic Processes In The Electrocatalytic Oxygen Reduction Reaction, Ya-Chen Feng, Xiang Wang, Yu-Qi Wang, Hui-Juan Yan, Dong Wang

Journal of Electrochemistry

As an electrochemical energy conversion system, fuel cell has the advantages of high energy conversion efficiency and high cleanliness. Oxygen reduction reaction (ORR), as an important cathode reaction in fuel cells, has received extensive attention. At present, the electrocatalysts are still one of the key materials restricting the further commercialization of fuel cells. The fundamental understanding on the catalytic mechanism of ORR is conducive to the development of electrocatalysts with the enhanced activity and high selectivity. This review aims to summarize the in situ characterization techniques used to study ORR. From this perspective, we first briefly introduce the advantages of …

Recent Advances In Electrical Transport Spectroscopy For The In Situ Measurement Of Electrochemical Interfaces, Zhang-Yan Mu, Meng-Ning Ding

Journal of Electrochemistry

Electrochemical/electrocatalytic technology has played a central role in achieving highly efficient energy conversion and storage. To date, the in-depth electrochemical research begins to require accurate and multi-dimensional information of electrochemical interfaces, which usually relies on the application of in situ characterizations. Electrical transport spectroscopy (ETS) is a newly developed measurement strategy based on chip-platform, and provides in situ information of electrochemical interfaces from a novel perspective due to a signal origin that is fundamentally different from typical spectroscopic and electrochemical techniques. In this tutorial review, the working principle and experimental setup of ETS are described in detail with the demonstration …

Rational Design Of Electrochemical Molecular Probes For Highly Selective And Long-Term Measurement In Vivo, Yue Wang, Li-Min Zhang, Yang Tian

Journal of Electrochemistry

Designing electrochemical interfaces for in vivo analysis of neurochemicals with high selectivity and long-term stability is vital for monitoring dynamic variation and dissecting the complex mechanisms of pathogenesis in living animals. This review focuses on the development of electrochemical interfaces based on rational design of molecular probes for in vivo measurement with high selectivity and high stability from three aspects: (1) Specific recognition probes were rationally designed and created to remarkably improve the selectivity of in vivo analysis in a complicated brain environment. (2) The Au-C≡C functionalized surface was developed to remarkably enhance the stability of molecular assembly, and employed …

A Flexible Enzymeless Glucose Sensor Via Electrodepositing 3d Flower-Like Cos Onto Self-Supporting Graphene Tape Electrode, Jiang Li, Zuo-Peng Li, Yun-Feng Bai, Su-Xing Luo, Yong Guo, Ya-Yan Bao, Rong Li, Hai-Yan Liu, Feng Feng

Journal of Electrochemistry

Three-dimensional (3D) nanostructural Flower-like cobalt sulfide (CoS) on flexible self-supporting graphene tape electrode (GTE) with remarkably electrocatalytic activity toward glucose was successfully prepared by electrodeposition. Structural characterizations revealed that the electrodeposited CoS was highly dispersed on GTE as an active material. The fabricated binder-free and self-standing CoS/GTE shows a good linear response in the range of 0.025 ~ 1.0 mmol·L^-1, reaching a high glucose sensitivity value of 323.3 μA·(mmol·L ^-1)^-1·cm^-2 and a low detection limit of 8.5 μmol·L ^-1 (S/N = 3). Moreover, the as-prepared sensor was well applied for glucose …

Materials And Methodologies For Spectroscopic And Optical Analytical Applications In Cultural Heritage Conservation Science, Lyndsay Nichole Kissell

Dissertations and Theses

The field of conservation science falls in the intersection of science and art. The work of conservation scientists may include any single subdiscipline of chemistry, though it is most commonly a highly interdisciplinary field taking skills from analytical, organic, and inorganic chemistry, as well as surface and materials science. The aims of conservation scientists are to answer questions about the production and aging of material cultural heritage. Knowing the materials used by an artist can lead to insight about the intentions of the object and knowing how those materials degrade will enable the use of preventative measures to ensure the …

Characterization Of Nanoparticles Using Inductively-Coupled Plasma Mass Spectrometry, Jabez D. Campbell

Graduate Theses/Dissertations

Nanomaterials are a relatively new class of materials that have many applications which span a wide host of fields from medical products to consumer products. The possible compositions and forms of nanomaterials are just as varied as the applications. Therefore, a versatile characterization method is needed for researchers and regulators alike to ensure nanomaterials are properly used. Single Particle Inductively Coupled Plasma Mass Spectrometry (SP-ICP-MS) is a functional method that could fill the characterization need in the nanomaterial research field. Using data from both SP-ICP-MS tests and data from literature established characterization methods, the viability of making SP-ICP-MS the standard …

Structure Analysis Of Pemfc Cathode Catalyst Layer, Rui-Qing Wang, Sheng Sui

Journal of Electrochemistry

The sluggish oxygen reduction reaction (ORR) on the cathode of the proton exchange membrane fuel cell (PEMFC) has always been one of the key factors limiting its commercialization. The optimization of the cathode catalytic layer structure plays an important role in improving fuel cell performance and reducing production costs. In this paper, two different catalysts (platinum nanoparticles (Pt-NPs) and platinum nanowires (Pt-NWs)) were prepared by using catalyst coated substrate (CCS) method. By constructing a double-layer catalytic layer structure, we analyzed the effect of different catalytic layer structures by performing a single cell test. The results showed that the dense platinum …

Photoelectrochemical Sensing Based On Zr-Mofs For Homocysteine Detection, Wen-Xia Dong, Guang-Ming Wen, Bin Liu, Zhong-Ping Li

Journal of Electrochemistry

Due to the independent form of the light source and detection system, photoelectrochemical (PEC) sensor has the advantages of low background, high sensitivity and simple operation. So far, PEC systems have been widely used in the fields including the actual detection of metal ions, biological antibodies or antigens in environmental pollutants. When the photosensitive material is irradiated by a light source with an energy being equal to or greater than its band gap, electrons (e^-) transition occurs from the valence band to the conduction band, leaving a hole (h⁺), at the same time, the generated electron-hole …

Mathematical Expression And Quantitative Analysis Of Impedance Spectrum On The Interface Of Glassy Carbon Electrode, Lei Cheng, Pu-Xuan Yan, You-Jun Fan, Hua-Hong Zou, Hong Liang

Journal of Electrochemistry

Glassy carbon electrode (GCE) is a common basic electrode for various electrochemical sensors, and the detection properties are determined by its interfacial characteristics. In this paper, we established an equivalent circuit including electrolyte resistance (R_el), charge transport resistance (R_ct), diffusion impedance (R_di, C_di), electrochemical (oxidation/reduction) reaction impedance (R_R, C_R), surface adsorption impedance (R_ads , C_ads), double-layer capacitance (C_DL), and derived the mathematical expression for the equivalent circuit. The R_el and C_DL are contributed by inactive …

Preparation Of Modified Titanium Based Pbo2 Electrode And Its Rapid Detection Of Cod, Qi Sun, Yan-He Han, Xiao-Lu Fu

Journal of Electrochemistry

In the traditional Ti/β-PbO₂ electrode, the crystal lattice difference between β-PbO₂ and Ti matrix is large, and the prepared electrode is easy to fall off and has a short service life. It needs to be modified in actual use. Based on the advantages of α-PbO₂ material and Ag material in terms of adhesion and conductivity, respectively, the above two materials are selected as the intermediate layer of Ti/β-PbO₂ electrode to improve electrode performance. In this paper, by preparing Ti/α/β-PbO₂ and Ti/Ag/β-PbO₂ electrodes …

Fundamentals Of Electrochemical Impedance Spectroscopy For Macrohomogeneous Porous Electrodes, Xiang Li, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jia Wang, Yang Liu, Yu-Feng Zhao, Juan Wang, Jiu-Jun Zhang

Journal of Electrochemistry

Electrochemical impedance spectroscopy (EIS) can be used to diagnose charge transfer reactions and mass transport in porous electrodes. The charge transfer reactions include interfacial charge accumulation and charge conduction as well as electrochemical reaction. In this paper, the complex phasor method is developed under the macrohomogeneous assumption to build an impedance model of porous electrodes for clarifying several vague expressions in the traditional approaches. The following researches are carried out: (1) Identifying characteristic parameters for the porous electrodes, including electrode electronic conductivity σ₁, electrolyte ionic conductivity σ₂, interface charge transfer conductivity g_ct, unit area …