Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2911 - 2940 of 4489

Full-Text Articles in Chemistry

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan Nov 2008

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS),Tafel polarization curves and scanning electron microscopy(SEM) were used to study the corrosion inhibition of AZ61 magnesium alloy in 3.5% NaCl medium with tungstate.Results showed that tungstate demonstrates strong inhibition to the corrosion of AZ61 magnesium alloy.At the concentration of 0.01 mol/L,tungstate has a high inhibition efficiency 75.5%.Tungstate is an anodic inhibitor that mainly inhibited the anodic reactions of magnesium alloy through forming a compact protective layer that covered the magnesium alloy surface active sites.

Go to article

Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang Nov 2008

Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang

Journal of Electrochemistry

The effect of the polyethylene glycol(PEG) molecular weight(MW) upon via-hole filling with diameter of 50 μm and aspect ratio of 1 in the acid copper plating solution was studied.The cathodic polarization in copper electroplating bath with PEG of different molecule weights was investigated by linear sweep voltammetry.The surface roughness,crystallography,and the resistivity of copper films were characterized by X-ray diffraction(XRD),atomic force microscopy(AFM) and the four-point probe measurements.The results showed that the polarization on the cathode and the hole-filling capability of electroplating copper bath were increased evidently with an increase of PEG molecular weight from 600 to 8000.When the PEG MW was …

Go to article

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu Nov 2008

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu

Journal of Electrochemistry

A highly-sensitive and mercury-free method of determining iodate ion in table salt was established based on carboxylic carbon nanotubes modified carbon paste electrode.In 0.1 mol/L NaOH solution,there was a sensitive cathodic stripping peak on voltammograms.The stripping peak potential was-0.52 V when accumulation time of IO-3 at the modified electrode was 60 s and the potential scan rate was 300 mV/s.There was a good liner relationship between the peak current and IO-3 concentration in the range of 8.0×10-10 ～ 5.0×10-8 mol/L and 1.0×10-7 ～ 3.0×10-6 mol/L with the correlation coefficient of 0.999 and 0.998,respectively.The detection limit was …

Go to article

The Hydrothemal Synthesis Of Nanoscale Lifepo4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong Nov 2008

The Hydrothemal Synthesis Of Nanoscale Lifepo4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The cathode materials of LiFePO4 were prepared via a hydrothermal reduction method using FeCl3 as Fe source and iron as a reducing agent.The results showed that ferric salt could be reduced to ferrous salt completely under the hydrothermal condition and pure-phase LiFePO4 was obtained based on the test results of XRD and FTIR. Carbon-coated LiFePO4 was synthesized by pyrolysisng glucose at high temperature. The morphologies of pure LiFePO4 displayed cluster-like while the LiFePO4/C displayed sphere-like particles. The electrochemical test showed that the LiFePO4/C had good rate performance,while LiFePO4 delivered much …

Go to article

Synthesis Of The Lifepo4 By Co Reduction: Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang Nov 2008

Synthesis Of The Lifepo4 By Co Reduction: Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang

Journal of Electrochemistry

LiFePO4 cathode material was synthesized by CO reducing FePO4 and LiOH precursors.The structure,morphology and electrochemical performances of such LiFePO4 material were characterized by XRD,SEM and charge-discharge tests.It was shown that the particle size of the LiFePO4 synthesized with 5% excess of LiOH in the precursor was about 200 nm.By carbon coating,the LiFePO4 electrode was able to deliver a reversible capacity of 158 mAh·g-1 at 0.1C discharge rate.Temperature-programmed X-ray diffraction was employed to monitor the reaction during the formation of LiFePO4,and Li3Fe2(PO4)3 was found to be …

Go to article

Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie Nov 2008

Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie

Journal of Electrochemistry

Effects of solution pH on the electrochemical behavior of tiron(sodium 4,5-dihydroxy-1,3-benzendisulfonic) couple(on a graphite electrode) were studied by cyclic voltammetry in aqueous solutions.It is shown that at pH<4,tiron exhibited a redox process at a relatively high potential with a good reversibility.A redox flow battery was formed employing tiron as the positive active species and V(III)/V(II) as the negative redox couple.In sulfuric acid medium,the coulombic efficiency of the tiron-V redox flow cell was more than 90% with a good cycle life.The decay in the cycle performance was minimal.Therefore,the feasibility of tiron as active materials for redox flow battery application is demonstrated.

Go to article

Study On The Texturization Of C-Si Wafers By Different Kinds Of Alkaline For Heterojunction Solar Cells, Yu-Hua Dou, Yu-Qin Zhou, Mei-Fang Zhu, Shuang Song, Feng-Zhen Liu, Jin-Long Liu, Zhan-Jun Zhang Nov 2008

Study On The Texturization Of C-Si Wafers By Different Kinds Of Alkaline For Heterojunction Solar Cells, Yu-Hua Dou, Yu-Qin Zhou, Mei-Fang Zhu, Shuang Song, Feng-Zhen Liu, Jin-Long Liu, Zhan-Jun Zhang

Journal of Electrochemistry

The texturization of(100) crystalline silicon(c-Si) wafer was studied by field-emission scanning electron microscope using different kinds of etchant: sodium hydroxide,sodium carbonate and tribasic sodium phosphate.By optimizing the etching parameters,the lowest values of averaged reflectance(Rav) were obtained to be 9.70% for NaOH,9.76% for Na2CO3 and 8.63% for Na3PO4·12H2O,which is comparable to that of the wafer with textured surface covered with an anti-reflection coating of either silicon nitride or thermally grown silicon dioxide.The relation of Rav and surface morphology of textured wafer was analyzed.Moreover,special emphasis was put on the role of isopropyl alcohol(IPA) …

Go to article

Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang Nov 2008

Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang

Journal of Electrochemistry

The combustion products of thermal battery used iron-heated powders have been studied.It is identified by X-ray diffraction (XRD) analysis that the main compositions of the combustion products are Fe, FeO and KCl. The transmission electron microscopy(TEM) shows a typical core-shell structure with un-reacted Fe particle core coated by FeO shell with a shell thickness of around 200 nm. The combusted iron-heated powders exhibit no metal property, which is contrast to previous assumption. Further measurement indicates that at the ambient temperature the combustion products show semiconductor property of the p-type with conductivity in the order of 103 S·cm-1, which …

Go to article

Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang Nov 2008

Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang

Journal of Electrochemistry

The Ir/C catalyst with 30%(by mass) Ir was prepared in the CH3CH2OH and H2O binary system.The X-ray diffraction(XRD) data showed that the average sizes of the Ir particles in the Ir/C catalyst was about 2.2 nm.The results of the electrochemical measurements indicated that the electrocatalytic activity of the Ir/C catalyst for the ammonia oxidation in the neutral NaClO4 solution was similar to the Ir catalyst,while electrocatalytic stability was much better than that of the Ir catalyst.Furthermore,the peak current density of the ammonia oxidation at the Ir/C catalyst electrode showed a good linear relationship …

Go to article

Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li Nov 2008

Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li

Journal of Electrochemistry

The chloroperoxidase(CPO) was immobilized onto the surface of SWNTs modified electrodes.The electrochemical behaviors of modified electrode have been investigated by cyclic voltammetry.The appearance of a pair of well-defined redox peaks in the CV curve indicated that SWNTs can promote the electron transfer reaction of CPO.The results of cyclic voltammetry in PBS of different pH,from 3~9,showed that the reaction of CPO on the modified electrode was with equal numbers of electron and protein.This readily prepared SWNTs modified electrode showed excellent stability and good catalysis to O2.

Go to article

Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang Nov 2008

Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang

Journal of Electrochemistry

By using a galvaostatic electrodeposition method in the ZnCl2 solution,the highly oriented ZnO nanorod array films have been successfully prepared on ITO substrate after the pretreatment with ZnO nanoparticles.And they were characterized by scanning electron microscope,X-ray diffraction and transmittance spectra.The results indicated that the ZnO nanorod arrays grew along(001) direction with an orientation perpendicular to the substrate.When the wavelength of incident was over 380 nm,the ZnO nanorod arrays showed high optical transmission of above 95%.Furthermore,the band gap became narrower.

Go to article

Preparations Of Composite Electrodes Of Pt With HXWo3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li Nov 2008

Preparations Of Composite Electrodes Of Pt With HXWo3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li

Journal of Electrochemistry

Three composite electrodes of platinum with hydrogen tungsten bronze(HxWO3)were prepared by voltammetry: hydrogen tungsten bronze deposited on platinum(HxWO3/Pt);platinum deposited on hydrogen tungsten bronze(Pt/HxWO3) and codeposited platinum and hydrogen tungsten bronze(Pt-HxWO3).The eletro-catalytic activities of three electrodes toward oxygen reduction reaction were studied.It is found that the catalytic activity of platinum can be improved by introducing with hydrogen tungsten bronze.Among these composite electrodes Pt/HxWO3,and the electrode shows the best eletro-catalytic activity toward oxygen reduction reaction,hence,provides a new way for reducing loading of …

Go to article

High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao Nov 2008

High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao

Journal of Electrochemistry

The Pt/C catalyst with high dispersion and high performance was prepared successfully by an organic colloidal method and small batch production(10g) of Pt/C catalyst has been realized.The particle sizes of the active components in the catalyst could be as small as 2.8 nm and the active surface area was up to 450 m2/g.A high performance membrane-electrode assembly(MEA) with surface area of 275 cm2 has been prepared by using the home-made catalyst with a catalyst coated membrane method invented in the lab,and a 5 kW stack has been assembled.The stack showed working 10 h at room temperature,atmosphere and …

Go to article

Ceo2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang Nov 2008

Ceo2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang

Journal of Electrochemistry

In this paper,the cerium oxide(CeO2) nanoparticles were electrochemically deposited on a Pt electrode by potentiostatic deposition(psd) and potential pulse deposition(ppd) to form CeO2/Pt composite electrodes,CeO2/Pt(psd) and CeO2/Pt(ppd).The properties of the CeO2 were characterized by field emission scanning electron microscope(FESEM) and X-ray diffraction(XRD).The results showed that the CeO2 nanoparticles prepared by psd and ppd were homogeneous and dense.The methanol oxidation reaction(MOR) and oxygen reduction reaction(ORR) on the Pt electrode were enhanced with the introduction of CeO2 into Pt.In addition,the catalytic capability of the CeO2/Pt electrode can be further …

Go to article

Effect Of Ch2Cl2 On The Redox Behavior Of Ferrocene In Ionic Liquid Bmimpf6, Wei-Wei Ji, Li-Qun Xu, Dong-Mei Li, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang Nov 2008

Effect Of Ch2Cl2 On The Redox Behavior Of Ferrocene In Ionic Liquid Bmimpf6, Wei-Wei Ji, Li-Qun Xu, Dong-Mei Li, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang

Journal of Electrochemistry

The effects of CH2Cl2 on the room temperature redox behaviors of ferrocene in ionic liquid,BmimPF6,were studied by cyclic voltammetry and AC Impedance.The results suggested that the presence of CH2Cl2,accelerated the dissociation of ionic liquid,leading to lower viscosity and larger ionic conductovity,hence,the diffusions of ferrocence in BmimPF6 were enhanced and the peak currents of redox reactions were increased.The changes in the double-layer structure at the electrode interface resulted in larger capacitance,which reduced the electrode recution resistances,accordirgly,the reaction kinetics of ferrocene were enhanced.

Go to article

Electrochemical Properties Of Lamg(11)Zr+Ni Composite, Xin-Chun Yan, Zi-Li Liu, Xin-Bo Liu Nov 2008

Electrochemical Properties Of Lamg(11)Zr+Ni Composite, Xin-Chun Yan, Zi-Li Liu, Xin-Bo Liu

Journal of Electrochemistry

Using the LaMg11Zr as the initial alloy,the LaMg11Zr+Ni composite was prepared by mechanical alloying,and the effect of ball-milling time on the amorphous structure of alloy powers was characterized by X-ray diffraction(XRD).The amorphous(LaMg11Zr+Ni) alloy can be obtained after 20 h ball-milling,and has the best electrochemical capacity,electrochemical cycle stability.

Go to article

Application Of Self-Assembly Technique In The Process Of Metallized Fabric, Yue-Hui Ma, Wei Wang, Dan Yu, Jin-Xin He Nov 2008

Application Of Self-Assembly Technique In The Process Of Metallized Fabric, Yue-Hui Ma, Wei Wang, Dan Yu, Jin-Xin He

Journal of Electrochemistry

After the pretreatment of nylon fabric by functional chitosan,the self-assembly technique was used in the process of activation before electroless plating to produce the CS-Pd membrane.The nanosized palladium particles with nanoscal have large relative surface and high catalyzed activity.Electromagnetic wave shielding fabric was prepared by electroless plating of Ni-P alloy with the activated fabric.The optimal process condition of CS finishing was given with the orthogonal and single factor experiments.The variation of fabric surface structure was characterized by SPM,SEM.Based on the Schelkunoff theory.The electromagnetic shielding effectiveness comes above 30 dB,which corresponds to shielding 96.0 percent of the electromagnetic wave or more.

Go to article

Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang Nov 2008

Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang

Journal of Electrochemistry

The electrochemical behavior of paracetamol(PCT) was studied at glassy carbon electrode activated by cyclic voltammetry.In HAc-NaAc buffer solution(pH=4.00),a couple of sensitive redox peaks were recorded about 0.54 V in the cyclic voltammograms.The result indicated that the process was controlled by adsorption and nearly reversible.The reaction electron and proton numbers were estimated,respectively,to be two.Excllent linearity was observed in the correlation between the oxidation peak current and the concentration of PCT in the range of 8.00×10-6～2.00×10-4 mol·L-1.The correlative coefficient was-0.999 18.The detection limit was 6.34×10-6 mol·L-1.This method can be used for the determination of PCT real …

Go to article

Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu Nov 2008

Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu

Journal of Electrochemistry

Hydrophilic aluminum oxide is popularly used for heat exchanger of air-condition.Herein,we developed a simple method to prepare superhydrophilic aluminum oxide on the surface of aluminum through single-step electrochemical oxidization.The morphologies and water contact angles on surfaces of alumina fabricated under different electrochemical conditions were investgated.Superhydrophilic surfaces fabricated by this method have good stability and high mechanical strength with water contact angle almost 0°.Coated with low surface energy materials,superhydrophilc alumina will be converted to superhydrophobic.

Go to article

Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang Nov 2008

Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang

Journal of Electrochemistry

A modified electrode has been constructed by depositing a novel copper(Ⅱ) complex 2biPy(ClO4)4 on the glassy carbon electrode through the method of cyclic voltammetry(CV).It was found that the modified electrode exhibited high electrocatalytic activity toward L-Cysteine oxidation with good reproducibility and high sensitivity.The peak current of semi-derivative linear scan was proportional to the concentration of L-cys in the range of 1×10-6～3×10-4 mol·L-1.The detection limit was 5×10-7 mol·L-1.

Go to article

Patent: Cell-Permeable Miniature Proteins, Alanna S. Schepartz, Douglas S. Daniels, Betsy Smith Nov 2008

Patent: Cell-Permeable Miniature Proteins, Alanna S. Schepartz, Douglas S. Daniels, Betsy Smith

Chemistry Faculty Publications

Abstract: The present invention generally relates to miniature proteins, including miniature proteins that are permeable to cells. Certain aspects of the invention are generally related to miniature proteins, such as avian pancreatic polypeptide (aPP), modified such that the miniature proteins are permeable to cells. For instance, a portion of the aPP, such as the alpha helix region and/or the type II polyproline helix region, may be modified to render the region substantially cationic. As an example, one or more residues may be substituted with cationic amino acid residues such as arginine. The miniature proteins may also have additional functions, such …

Go to article

Linear Dichroism In Resonant Inelastic X-Ray Scattering To Molecular Spin-Orbit States, Renaud Guillemin, Stephane Carniato, Wayne C. Stolte, Loic Journel, Richard Taieb, Dennis W. Lindle, Marc Simon Sep 2008

Linear Dichroism In Resonant Inelastic X-Ray Scattering To Molecular Spin-Orbit States, Renaud Guillemin, Stephane Carniato, Wayne C. Stolte, Loic Journel, Richard Taieb, Dennis W. Lindle, Marc Simon

Chemistry and Biochemistry Faculty Research

Polarization-dependent resonant inelastic x-ray scattering (RIXS) is shown to be a new probe of molecular-field effects on the electronic structure of isolated molecules. A combined experimental and theoretical analysis explains the linear dichroism observed in Cl 2p RIXS following Cl 1s excitation in HCl and CF3Cl as due to molecular-field effects, including singlet-triplet exchange, indicating polarized-RIXS provides a direct probe of spin-orbit-state populations applicable to any molecule.

Go to article

Inverse Velocity Dependence Of Vibrationally Promoted Electron Emission From A Metal Surface, N. H. Nahler, J. D. White, Jerry L. Larue, Daniel J. Auerbach, Alec M. Wodtke Aug 2008

Inverse Velocity Dependence Of Vibrationally Promoted Electron Emission From A Metal Surface, N. H. Nahler, J. D. White, Jerry L. Larue, Daniel J. Auerbach, Alec M. Wodtke

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

All previous experimental and theoretical studies of molecular interactions at metal surfaces show that electronically nonadiabatic influences increase with molecular velocity. We report the observation of a nonadiabatic electronic effect that follows the opposite trend: The probability of electron emission from a low–work function surface—Au(111) capped by half a monolayer of Cs—increases as the velocity of the incident NO molecule decreases during collisions with highly vibrationally excited NO(X2π½, V = 18; V is the vibrational quantum number of NO), reaching 0.1 at the lowest velocity studied. We show that these results are consistent with a vibrational …

Go to article

Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu Aug 2008

Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu

Journal of Electrochemistry

The electrochemical reductive behavior of 3,4,5,6-tetrachloro-2-trichloropyridine(heptachloropyridine) on silver electrode in the mixture of acetonitrile and water solutions containing TBAP was investigated by cyclic voltammetry.The influences of scan rate,concentration and temperature on the electrochemical behavior were discussed.It was shown that the reduction of heptachloropyridine on the silver electrode was a diffusion-controlled irreversible process.The diffusion coefficient of heptachloropyridine in the acetonitrile solution was 3.0×10-5 cm2/s.The mechanism of the dechloration of 3,4,5,6-tetrachloro-2-trichloropyridine was also discussed.

Go to article

Electrochemical Synthesis, Characterization And Fluorescence Property Of Nano Na2Sif6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu Aug 2008

Electrochemical Synthesis, Characterization And Fluorescence Property Of Nano Na2Sif6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu

Journal of Electrochemistry

The nano TiO2 film was prepared by sol-gel process and characterized with X-ray diffraction(XRD) and scanning electron microscope(SEM).It was found that the average size of pore diameter was about 80 nm for the nano TiO2 film.The Nano Na2SiF6 was synthesized by electrochemical deposition on the nanoporous film electrode and characterized with XRD and transmission electron microscope(TEM).The result showed that the average size of nanoparticle was 20 nm for the nano Na2SiF6.The fluorescence property of nano Na2SiF6 was also studied briefly.The result indicated that the nano Na2SiF …

Go to article

Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan Aug 2008

Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan

Journal of Electrochemistry

Microbial fuel cells(MFCs) were constructed by inoculating fresh sedimentary microorganisms.Effect of phenol on performance of MFCs was investigated.The results showed that the generation of electrical current was induced by bacteria attached on the surface of the anode.Presence of phenol reduced the rate of glucose consumption and extended the duration of electricity generation with the same addition of glucose.In addition,the electricity generation by a single strain(belonging to pseudomonas species) separated from the sedimentary MFC was also investigated.The experimental results indicated that the presence of metabolic intermediates which exhibited electrochemical activity was necessary for the electricity production.Analysis of GC-MS showed that the …

Go to article

Sucrose Modification On Li4Ti5O12 Anode Material, Zhi-Hong Tian, Hai-Lei Zhao, Zhi-Feng Wang, Jie Wang Aug 2008

Sucrose Modification On Li4Ti5O12 Anode Material, Zhi-Hong Tian, Hai-Lei Zhao, Zhi-Feng Wang, Jie Wang

Journal of Electrochemistry

The carbon modified Li4Ti5O12 was prepared by solid state reaction by using sucrose as carbon source. The XRD results showed that the incorporation of carbon did not change the spinel crystal structure of Li4Ti5O12 but it could prevent the particle agglomeration. The sample with 10%(by mass) sucrose displayed the best electrical performance, a 179.1 mAh/g of initial specific capacity was obtained at 0.2C, while 143.8 and 129.4 mAh/g at 2C and 3C, respectively. The CV and EIS studies revealed that carbon modification lowered the electrode polarization and electrode reaction resistance of Li4Ti5O12.

Go to article

Electrochemical Properties Of Sub-Micron Li4Ti5O12 Powders, Chen-Shu Du, Hua-Bin Yang, Zuo-Xiang Zhou, Meng-Tao Wu, Lai-He Huang, Ning Xu Aug 2008

Electrochemical Properties Of Sub-Micron Li4Ti5O12 Powders, Chen-Shu Du, Hua-Bin Yang, Zuo-Xiang Zhou, Meng-Tao Wu, Lai-He Huang, Ning Xu

Journal of Electrochemistry

The sub-micronmeteric Li4Ti5O12 powder material was successfully prepared through an improved solid-state synthesis process.The results of X-ray diffraction(XRD), scanning electron microscopy(SEM) and laser particle size distribution analysis showed that only a single spinel phase and a normal distribution pattern with the average size(D50) of 0.886μm could be observed. Due to the suitable partical size distribution, the Li4Ti5O12 powders showed a promising electrochemical performance. At the discharge current densities of 0.1C(16.5 mAh/g) and 5C, the discharge capacities reached 165 mAh/g and 107 mAh/g, respectively. Even at 10C, it still reached 54 mAh/g.

Go to article

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang Aug 2008

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang

Journal of Electrochemistry

Microcrystals of metallic copper were electrochemically deposited onto the surface of porous silicon films in the aqueous electrolyte of copper(II) chloride.The microstructures of electrochemically deposited copper microcrystals on the porous silicon films were characterized by using scanning electron microscopy.The results have demonstrated that both center-hollowed and center-solid equilateral triangles in the sizes of several micrometers can be formed on the smooth bed of copper microcrystals.As the deposition duration increased from 0 to 28 hours,the fractal dimensions of the porous silicon was decreased from 2.608 to 2.252,suggesting that the electrochemical deposition can smooth the rough surface of porous silicon films.Compared to …

Go to article

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu Aug 2008

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu

Journal of Electrochemistry

In this paper,it is reported for the first time that the electrocatalytic activities of the carbon supported Au(Au/C),carbon supported Ir(Ir/C) and the carbon supported Au-Ir(Au-Ir/C) catalysts prepared in the aqueous solution with tetrahydrofuran(THF) for the oxidation of formic acid and for the oxygen reduction were compared.It was found that all three catalysts showed no electrocatalytic activity for the oxidation of formic acid,but the electrocatalytic activity of the Au-Ir/C catalyst for oxygen reduction was much better than those of Au/C and Ir/C.Thus,the Au-Ir/C catalyst is suitable to be used as the cathodic catalyst in Direct formic acid fuel cell(DFAFC).

Go to article

First Prev Next Last