Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 721 - 750 of 837

Full-Text Articles in Chemistry

Electrochemical Lithium Insertion Of Nanosized Tio2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song May 2004

Electrochemical Lithium Insertion Of Nanosized Tio2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song

Journal of Electrochemistry

The protonic titanate nanotubes with the diameter of 10～15 nm were synthesized via hydrothermal method in NaOH solution and the calcined nanotubes at 500 ℃ were transferred to anatase nanorods with the diameter of 12～20 nm due to dehydration.The electrochemical behavior of the anatase nanorods as lithium insertion materials was examined. The results showed that the nanorod electrode had the high initial discharge capacity of 232 mAh/g and second reversible capacity of 198 mAh/g. The capacity of nanorod electrode maintained 152mAh/g after 20 cycles.

Go to article

Preparation And Optical Properties Of Highly Ordered Cds Nanowire Arrays, Lan Sun, Chang-Jian Lin May 2004

Preparation And Optical Properties Of Highly Ordered Cds Nanowire Arrays, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Highly ordered CdS nanowire arrays have been prepared by using dc electrodeposition in the porous anodic aluminum oxide template. Scanning electro microscopy (SEM) and transmission electron microscopy (TEM) reveal that the nanowires are uniform and highly ordered. The measurements of X-ray diffraction and high-resolved electron microscopy (HRTEM) show that the nanowires are hexagonal structure with the crystallographic c-axis preferentially oriented along the length of the pore. The UV-Vis absorption spectra of CdS nanowire arrays show that the absorption edges of the nanowire arrays shift towards short wavelength with the decrease of the nanowire size. The photoluminescence measurements show that the …

Go to article

Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li May 2004

Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li

Journal of Electrochemistry

The concentrationsof soluble Mn(Ⅲ) species, during the reduction ofelectrolytic MnO2 (EMD) in alkaline solution,have been monitored in situ by UV-visible spectroscopy. The concentration of Mn(Ⅲ) ion in solution changes with discharge time. The first electron discharge process of EMD can be described by three different steps: 1) the reduction of Mn4+ ions on the surface of EMD particles and the structural defect regions within the EMD, 2) the reduction of Mn4+ ions in ramsdellite, 3)the reduction of Mn4+ ions in pyrolusite. During the second electron discharge of EMD, the soluble Mn(Ⅲ) is reduced to Mn(Ⅱ) , …

Go to article

Template Synthesis Of Highly Ordered Monocrystalline Metal Nanowire Arrays By A Two-Step Ac Electrodeposition, Juan Xiang, Jing-Hua Tian, Zi-Mian Ni, Zhi-Feng Huang, Bo Liu, Zhong-Qun Tian Feb 2004

Template Synthesis Of Highly Ordered Monocrystalline Metal Nanowire Arrays By A Two-Step Ac Electrodeposition, Juan Xiang, Jing-Hua Tian, Zi-Mian Ni, Zhi-Feng Huang, Bo Liu, Zhong-Qun Tian

Journal of Electrochemistry

The monocrystalline metal nanowire arrays were prepared by using a two-step AC electrodeposition in porous anodic aluminum oxide (AAO) template. The growth mechanism of nanowires was discussed. As a result, it has been found that the second voltage pulse has a considerable effect on the pore-filling ratio, the uniformity and the crystal structure, whereas the initial voltage pulse affects only the pore-filling ratio. Using the two-step AC electrodeposition, a highly ordered monocrystalline metal nanowire arrays with a pore-filling ration above 95% can be easily obtained.

Go to article

Study On The Electrochemical Impedance Spectroscopy (Eis) Of Al-Bronze At Different Anodic Potentials, Hui Yu, Sa-Ying Dong, Hai-Bo Xu, Ming-Xian Sun Feb 2004

Study On The Electrochemical Impedance Spectroscopy (Eis) Of Al-Bronze At Different Anodic Potentials, Hui Yu, Sa-Ying Dong, Hai-Bo Xu, Ming-Xian Sun

Journal of Electrochemistry

The corrosion dissolution mechanism of Al-bronze has been investigated by Electrochemical Impedance Spectroscopy (EIS) at different anodic potentials. In the active region, the corrosion products are complex compounds of cupreous chloride and the diffusion of CuCl2- is the control process of electrochemical reaction. In the transition region, there exhibits two capacitance loops on EIS because CuCl and cupreous oxides films deposit on the electrode surface. In the limiting current region, an inductance loop appears on the EIS because the breakdown of the oxides film leads to serious pit corrosion.

Go to article

Substrates Made By Electrodeposition For Measuring Electrical Properties Of One Dimensional Nanomaterials, Jin-Xuan Liu, Juan Xiang, Zhong-Qun Tian, Bing-Wei Mao Feb 2004

Substrates Made By Electrodeposition For Measuring Electrical Properties Of One Dimensional Nanomaterials, Jin-Xuan Liu, Juan Xiang, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

A method to prepare alternating conducting/insulating substrates by electrodeposition-oxidation was established to facilitate I-E measurements of one-dimensional nanomaterial by CT-AFM. The prepared Au/CuO and HOPG/CuO substrates showed low roughness as well as high uniformity of the alternating conducting/insulating structure, Qualitative I-E measurements were performed on a single carbon nanotube attached to the two above-mentioned substrates, both showing metallic characteristics at room temperature and in air.

Go to article

Preparation, Structure And Electrochemical Hydrogenation Of Carbon Nanotubes Supported Platinum Catalysts, Qing-Gang He, Xiao-Zi Yuan, Xian-Xia Yuan, Zi-Feng Ma Feb 2004

Preparation, Structure And Electrochemical Hydrogenation Of Carbon Nanotubes Supported Platinum Catalysts, Qing-Gang He, Xiao-Zi Yuan, Xian-Xia Yuan, Zi-Feng Ma

Journal of Electrochemistry

In this paper, Pt/CNTs catalyst was prepared and its electrocatalytic property was studied by obtaining cycling voltammetry curves (C-V) and Tafel curves. In addition, the XRD,XPS and TEM tests were carried out to determine the structure and composition of the catalysts. It can be found that the platinum loading has been increased significantly using a carbon nanotubes support. Dispersion of Platinum was better and gave more active sites. The electrochemical characteristic of Pt/CNTs was also more desirable than that of Pt/C catalys t(Johnson Matthey). In conclusion, carbon nanotubes can played a conspicuous role in "electrogenerative" processes of PEMFC hydrogenation reactor.

Go to article

Formation And Characterization Of Water-Repellent Nano Tio2 Coating And Studying Its Anticorrosion Property, Guang-Xia Shen, Yi-Cong Chen, Chang-Jian Lin Feb 2004

Formation And Characterization Of Water-Repellent Nano Tio2 Coating And Studying Its Anticorrosion Property, Guang-Xia Shen, Yi-Cong Chen, Chang-Jian Lin

Journal of Electrochemistry

Using ethyl acetoacetate (EAcAc) as a chelating agent, ultra fine TiO2 sol is prepared. Nano-TiO2 coatings are deposited on the 316L stainless steel by the dip-coating. Hydrothermal post-treatment leads to crack-free coatings. Meanwhile, the surface struture and properties was optimized. Self-assembly of Hetadecafluorodecyltrimethoxysilane (FSA-13) fabricates hydrophobic layers on the surface of the nano-TiO2 coatings. Particle sizes of TiO2 sol was analysed by zeta pals potential analysis, and surface morphology, structure and properties was characterized by contract angle instrument, XRD, and SEM technologies. The results have shown that the surface of coatings is porous, with approx. 375 …

Go to article

Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding Feb 2004

Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding

Journal of Electrochemistry

Nanolaminated growth of the electrodeposition of zinc was studied. The structure and size of crystalline in zinc coatings were investigated by using FEG-TEM and XRD. The corrosion tests of the zinc deposition and the Coatings-Neutral salt spray test were performed, the capability in corrosion resistance of the nanolaminated growth was better than that of others.

Go to article

Preparation And Characterization Of Y-Type Carbon Nanotubes By Using Anodized Alumina Oxide (Aao) Template, Jing Zhang, Quan-Yong Gao, Yong Yang Nov 2003

Preparation And Characterization Of Y-Type Carbon Nanotubes By Using Anodized Alumina Oxide (Aao) Template, Jing Zhang, Quan-Yong Gao, Yong Yang

Journal of Electrochemistry

In this work, potential-modulation method was used in two-step anodization process to make an AAO template with Y-type nanochannels. Then Y-type carbon nanotubes with controlled length and branch angle were prepared in the template based on chemical vapor decomposion (CVD) method with Co particles as catalyst and C2H2 as carbon source. The Y-type nanotube branches exhibit the angle distribution ranging from 20° to 120°. The results demonstrated that the oxidation potential should be responsible for the angles and length of the branches. Short pulse and high oxidation potential will result in the short and dense nanotube branches.

Go to article

The Study On Carbon Nanotube-Loaded Pt Catalysts For Proton Exchange Membrane Fuel Cells, Hong Zhu, Feng-Juan Ge, Xiao-Hong Kang, Yu-Guo Yang, Yun-Hua Xu Nov 2003

The Study On Carbon Nanotube-Loaded Pt Catalysts For Proton Exchange Membrane Fuel Cells, Hong Zhu, Feng-Juan Ge, Xiao-Hong Kang, Yu-Guo Yang, Yun-Hua Xu

Journal of Electrochemistry

Carbon nanotube-supported-platinum (Pt/CNTs) and carbon-supported-platinum (Pt/C) catalysts were synthesized by in-situ chemical reduction. They were analyzed using TEM and XRD, then made into electrodes to be part of assemable PEMFC for the performence tests. The resulted show that Pt clusters in both catalysts are of small particle size (about 4nm), and Pt/CNTs exhibits a higher catalytic activity than Pt/C.

Go to article

Study On Electrochemical Behavior Of Sus316l Stainless Steel After Surface Modification, Cheng-Hao Liang, Liang Guo, Wan Chen, Jing-Xiao Liu Nov 2003

Study On Electrochemical Behavior Of Sus316l Stainless Steel After Surface Modification, Cheng-Hao Liang, Liang Guo, Wan Chen, Jing-Xiao Liu

Journal of Electrochemistry

The surface modification for SUS316L stainless steel was carried out by electroplating Rh, ion beam assisted deposition Ta2O5 and sol-gel-derived TiO2. In Tyrode's stimulated body fluid, the surface modified samples had been investigated with electrochemical techniques. The results indicated that the electrochemical stability and dissolution were improved significantly after surface modification. Moreover, as to ion beam assisted deposition Ta2O5 and Sol-gel-derived TiO2 film, the metal's d orbit electron holes filled up by the oxygen electrons made against the adsorption of hydrogen. Thus the cathode process, which is controlled by the hydrogen …

Go to article

The Current Fluctuations Of Carbon Steel In Nano2-Nacl Solutions, Yu-Ming Tang, Yu Zuo Nov 2003

The Current Fluctuations Of Carbon Steel In Nano2-Nacl Solutions, Yu-Ming Tang, Yu Zuo

Journal of Electrochemistry

The characteristics of current fluctuations of A3 carbon steel in NaNO2-NaCl solutions were studied with potentiostatic and potentiodynamic polarization methods. The steel remained stable passivation in 0.1 mol/L NaNO2 solution without Cl-. After NaCl was added in to the solution, current fluctuations with a characteristic of quick increase and slow decrease occurred, indicating quick dissolution and slow re-passivation of the metastable pits. The metastable pitting may cause accumulated corrosion damage around certain area and result in observable pits. With the increase of chloride concentration, the occurring potential for metastable pits Em rised, and peak values …

Go to article

Fabrication Of Scanning Micro Cl- Probe And In Situ Imaging Of Cl- At The Interface Of 2024 Al Aloy/Solution, Yu-Hua Lin, Min-Hua Shao, Rong-Gang Hu, Yan Li, Rong-Gui Du, Chang-Jian Lin Aug 2003

Fabrication Of Scanning Micro Cl- Probe And In Situ Imaging Of Cl- At The Interface Of 2024 Al Aloy/Solution, Yu-Hua Lin, Min-Hua Shao, Rong-Gang Hu, Yan Li, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Micro combination Ag/AgCl electrode with a tip measuring tens micron in diameter was fabricated. The probe satisfied in situ imaging of Cl- distribution at metal surface in chloride solution because of its excellent linearity between potential and Cl- concentration, rapid response, good stability and selectivity. With the aid of the home made Micro Electrode Scanning system and scanning Cl- probe, the effect of the [Cl-] at 2024-Al/solution interface on localized corrosion process was investigated. It was demonstated directly that Cl- ion in solution immigrated toward, then adsorbed preferentially and accumulated at the junction between the …

Go to article

Microstructure And Electrochemical Characteristics Of The Anodic Film Formed On Aluminum Surface, Jeng-Kuei Chang, Chi-Min Liao, Chih-Hsiung Chen, Wen-Ta Tsai May 2003

Microstructure And Electrochemical Characteristics Of The Anodic Film Formed On Aluminum Surface, Jeng-Kuei Chang, Chi-Min Liao, Chih-Hsiung Chen, Wen-Ta Tsai

Journal of Electrochemistry

The thickness, morphology, chemical composition, and crystallinity of the anodized film formed on aluminum were examined in a transmission electron microscope (TEM). Thin foil for TEM analysis was prepared by ultramicrotomy. The relationship between the microstructure and the electrochemical characteristics of the alumina film forming on the pure aluminum was discussed in this investigation. At the forming voltage less than 100V, the anodized films formed at 85 ℃in aqueous ammonium adipate electrolyte was amorphous in nature. Although the film resistance was increased with the forming voltage, its dielectric constant was not changed significantly. As the forming voltage exceeded 100V, crystalline …

Go to article

Study Of Marine Biocorrosion Using Afm And Molecular Techniques, Herbert H.P.Fang, Lichong Xu, Tong Zhang May 2003

Study Of Marine Biocorrosion Using Afm And Molecular Techniques, Herbert H.P.Fang, Lichong Xu, Tong Zhang

Journal of Electrochemistry

Biofilm is ubiquitous in nature.However,corrosin caused by biofilm is still by and large overlooked. This presentation is to demonstrate the applications of several newly developed analytical techniques in chemisrty and microbiology for the study of marine biocorrosion on steel. AFM(atomic force microscopy) was applied to investigate the initial formation mechanism of biofilm and the degree of corrosion of steel in polluted seawater. DNA/RNA-related molecular techniques were used to analyze the microbial composition corrosive biofilm. Results showed that microbial corrosion began within six days, and the corroded volume in the increased as a power function of time with an index 2.83. …

Go to article

In Situ Measurements Of Solution Conductivity In Microwave Field, Yong-Qing Su, Chun-Peng Liu Feb 2003

In Situ Measurements Of Solution Conductivity In Microwave Field, Yong-Qing Su, Chun-Peng Liu

Journal of Electrochemistry

The curves of the conductivity as a function of temperature for 24 kinds of solutions have been in situ measured both in the microwave field and in absence of microwave field. The results indicated that the relationship between the conductivity in microwave field (Lw) and temperature (T) can be expressed by an equation Lw=a′+b′T+c′T2 , similar to the one that is valid in absence of the microwave field Ln=a+bT+cT2. Conductivity in the absence and presence of microwave field can be linked by the equation lnLw=A+BLn+CL2n …

Go to article

Study For The Cathodic Behavior Of Active Chlorine On 316l Ss Electrode Surface, Hui Yu, Ming-Xian Sun, Yan Ma, Xiao-Bin Wang Feb 2003

Study For The Cathodic Behavior Of Active Chlorine On 316l Ss Electrode Surface, Hui Yu, Ming-Xian Sun, Yan Ma, Xiao-Bin Wang

Journal of Electrochemistry

The cathodic reducing reactions of active chlorine on 316 L SS electrode surface have been investigated by electrochemical techniques. The open circuit potential shifted positively and the limited diffusion current density increased significantly with the increasing content of active chlorine in the 3.5% sodium chloride solution. The two cathodic reduction processes of HClO and ClO- exhibited on the surface of electrode with the active chlorine added to the 3.5%sodium chloride solution and the corresponding potentials of the two reducing reactions were confirmed. The linear relationship of the mass transport-limited Faradaic current, Id vs. the square root of the angular …

Go to article

Pure Iron Electrolyzed From Scrap Iron Chips And Its Corrosion Characteristics, Wei-Min Cao, Ren-He Yin, Hui-Ceng Yan, Zhi-Qiang Ye Feb 2003

Pure Iron Electrolyzed From Scrap Iron Chips And Its Corrosion Characteristics, Wei-Min Cao, Ren-He Yin, Hui-Ceng Yan, Zhi-Qiang Ye

Journal of Electrochemistry

The high purity electrolytic iron was made from scrap iron chips. Electrolytic conditions of pure iron were determined in chloride baths and the highest purity was 99.983% by chemical analysis. Pure iron had very compact texture and high mechanical strength by SEM figures of cross section. In deaerated 0.5 kmol·m-3 H2SO4 and 0.5 kmol·m-3 NaCl solutions, the corrosion rate of iron decreased with increasing purity.

Go to article

Preparation And Electrochemical Lithium Intercalation Performance Of Different Shaped Carbon Nanotube, Mao-Hui Chen, Zhen-Cai Huang, Guo-Tao Wu, Jin-Kua You, Zu-Geng Lin Nov 2002

Preparation And Electrochemical Lithium Intercalation Performance Of Different Shaped Carbon Nanotube, Mao-Hui Chen, Zhen-Cai Huang, Guo-Tao Wu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

In the present work, different shaped carbon nanotubes were produced by the general CVD and the template method at different temperature (600 ℃,700 ℃) with the reaction gas of acetylene. The morphology, structure and the electrochemical lithium intercalation performance were comparatively studied and characterized by TEM, HRTEM, SEM, XRD, Raman techniques and Charge/Discharge Test. It was found that the different preparation methods and temperatures all had an obvious effect on these properties of carbon nanotubes. In our samples, with the increase of preparation temperature, the degree of crystallinity decreased, and the reversible specific capacity increased respectively.

Go to article

Nano-Sized Cobalt-Based Oxides As Negative Electrode For Lithium-Ion Batteries, Feng Huang, Zheng-Yong Yuan, Yun-Hong Zhou, Ju-Tang Sun Nov 2002

Nano-Sized Cobalt-Based Oxides As Negative Electrode For Lithium-Ion Batteries, Feng Huang, Zheng-Yong Yuan, Yun-Hong Zhou, Ju-Tang Sun

Journal of Electrochemistry

Nanosized cobalt-based oxide (Co3O4, CoB1.36O2.8 and CoB0.5Al0.1O1.5) samples were prepared by rheological phase method and were tested as anodes in secondary lithium batteries. The cells were cycled between 0.01V and 3.00 V. The best electrochemical performance was obtained from the Co3O4 cell, which retained 95% of its initial capacity (931 mAh/g) after 30 cycles. The doping of B, Al reduced the reversible capacity during the first discharge/charge cycle, and the quantity of reversible capacity reduced with B, Al increasing. The modifying structures at difference …

Go to article

Electrochemical Preparation And Reaction Mechanism Of Nanocrystalline Nio, Jia-Shan Gu, Ai-Jie Han, Xing-Fu Zhou, Dao-Bao Chu, Chang-Jian Lin Nov 2002

Electrochemical Preparation And Reaction Mechanism Of Nanocrystalline Nio, Jia-Shan Gu, Ai-Jie Han, Xing-Fu Zhou, Dao-Bao Chu, Chang-Jian Lin

Journal of Electrochemistry

Metallic nickel was electrochemically dissolved in absolute ethanol and acetylacetone mixed solutions and in the presence of Bu4NBr (as an electron-conductive additive). The electrolyte solution containing the precursor was then directly hydrolyzed to obtain nanocrystalline NiO. The precursor was characterized by FTIR, HNMR, Raman spectra and the nano-powder was characterized by XRD and TEM. The results showed that the NiO powder after calcined at 450 ℃ had formed the cubic NaCl structure and the nanocrystalline NiO prepared by this method had narrow size distribution of 10～15 nm. Moreover, the product yield could be improved by controlling temperature below …

Go to article

Detection And Analysis Of Sec1 Immunological Reaction By Afm And Electrochemical Method, Sa-Ying Dong, Hong-Ren Wang Nov 2002

Detection And Analysis Of Sec1 Immunological Reaction By Afm And Electrochemical Method, Sa-Ying Dong, Hong-Ren Wang

Journal of Electrochemistry

The goals of this work were to demonstrate the ability of atomic force microscopy (AFM) to detect various immunological processes between antibodies and antigens.A sensor was designed by covalently linking the antibody of staphylococcal enterotoxin Cl (SEC1) on the self-assembled gold surface. This sensor permitted detection of antibody-antigen recognition events which were highly correlated with the topography under different conditions. The statistic data of AFM were analysed. As control experiments, nonspecific antigens and lower concentration SEC1 antigens were directly observed. In addition, an acidic solution was used to break the antigen-antibody pair and made the sensor reuse. Electrochemical evidence was …

Go to article

Facilitated K+ Ion Transfer By Db18c6 Across The Micro Liquid/Liquid Interface, Dong-Ping Zhan, Bing-Liang Wu Aug 2002

Facilitated K+ Ion Transfer By Db18c6 Across The Micro Liquid/Liquid Interface, Dong-Ping Zhan, Bing-Liang Wu

Journal of Electrochemistry

A novel microcavity Ag|AgCl electrode was fabricated to construct the micro-interface of two immiscible electrolyte solutions(ITIES). The transfer reactions of K+ ion facilitated by DB18C6 across the water/1,2-DCE interface was investigated with the three-electrodes system. The corresponding reaction parameters were derived from the voltammetric data. The results showed that the microcavity electrode would be a useful and efficient tool to investigate the charge transfer reactions at ITIES.

Go to article

Pure Hap Film Prepared By Direct Electrodepositing On Metallic Surface And Its Mechanism, Hao-Bing Hu, Chang-Jian Lin, Fei Chen, Ren Hu, Ming Guo Aug 2002

Pure Hap Film Prepared By Direct Electrodepositing On Metallic Surface And Its Mechanism, Hao-Bing Hu, Chang-Jian Lin, Fei Chen, Ren Hu, Ming Guo

Journal of Electrochemistry

In controlling concentration of Ca2+ and PO43- in electrodeposition solution, the HAP film on Ti alloy has been deposited directly. Using XRD and SEM we have learned that prepared HAP is intact in crystal and equal in dimension. Thermodynamic calculation indicated that the HAP is easer formation of than that TCP of. With the XRD, SEM analyses and thermodynamic calculation, the electrodeposition mechanism has been discussed. It was proved that electrodepositon is a two-stage process and formation of HAP is a direct process from solution ions to HAP crystal without precursor.

Go to article

The Preparation And Characterization Of Growing Preferentially Cds Nanopartile Film, Huai-Guo Huang, Yan-Yan Xi, Zhi-Xin Zheng, Jia-Wei Yan, Jian-Zhang Zhou, Ling-Ling Wu, Zhong-Hua Lin May 2002

The Preparation And Characterization Of Growing Preferentially Cds Nanopartile Film, Huai-Guo Huang, Yan-Yan Xi, Zhi-Xin Zheng, Jia-Wei Yan, Jian-Zhang Zhou, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

CdS nanoparticle films were prepared on the PANI film, PATP film, Au film and ITO respectively by constant current deposition or current impulse method, and their structure and character were also studied. The results show that the substrates influence the structure and character of CdS particle film.

Go to article

Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin May 2002

Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin

Journal of Electrochemistry

A novel nanomaterial, zinc oxide (ZnO) and polyaniline (PANI) coaxial nanowires and their array in the template, was synthesized using anodic aluminum oxide (AAO) membrane as template. The morphology of these coaxial nanowires was observed with transmission electron microscope (TEM). The experiments on photoluminescence (PL) of coaxial nanowires and their array in AAO membrane show that the visible emission band of ZnO shifts from 530 nm to 400 nm and the luminescence is enhanced for the coaxial nanowires array in AAO membrane,and the visible emission band shifts to a lower wavelergth (385 nm) for coatial nanowires in NaOH solution. Possible …

Go to article

Photocurrent Enhancement By Ticl4 Post-Treatment For Tio2 Nanoporous Film Electrode, Yan-Jie Ren, Li Zhang, Sheng-Min Cai Feb 2002

Photocurrent Enhancement By Ticl4 Post-Treatment For Tio2 Nanoporous Film Electrode, Yan-Jie Ren, Li Zhang, Sheng-Min Cai

Journal of Electrochemistry

Enhanced photocurrent in dye-sensitized photoelectrochemical cell was obtained by post-treating the TiO2 nanoporous film electrode with TiCl4. By investigating the effect of the post-treatment on surface area, pore size distribution, laser pulse induced current transient of the film electrode, photocurrent increase by the post-treatment was assigned to the improved electron percolation resulting from broadening of interparticle neck.

Go to article

Further Evidence For Surface Properties Of Porous Silicon Resulting In Electroluminescence, Zhan-Jun Zhang, Bin Wu, Jing-Jian Li, Zhong-Fan Liu, Sheng-Min Cai Feb 2002

Further Evidence For Surface Properties Of Porous Silicon Resulting In Electroluminescence, Zhan-Jun Zhang, Bin Wu, Jing-Jian Li, Zhong-Fan Liu, Sheng-Min Cai

Journal of Electrochemistry

The electroluminescence of porous silicon in solutions at positive biases was investigated by luminescence spectrometer. The electroluminescence of porous silicon in solutions mainly depended on its surface properties. The elelctroluminescence was much enhanced when the sample of porous silicon was electrolyzed once again which had undergone an electroluminescence test. The tests of both cyclic voltammetry and the luminescence of the sample of porous silicon prepared by repeated electrolysis provided further evidence that the electroluminescence of porous silicon in solutions at positive biases stemmed from the oxidation of Si-H on the surface of porous silicon. The voltage tunable emitting for porous …

Go to article

Raman Spectroscopic Study On Mechanism Of Aluminum Triphosphate Pigment, Zhi-Jun Gu, Yong-Gui Liao, Zhi-Gang Zhang, Qi-Long Guo, Fang-Teng Su Feb 2002

Raman Spectroscopic Study On Mechanism Of Aluminum Triphosphate Pigment, Zhi-Jun Gu, Yong-Gui Liao, Zhi-Gang Zhang, Qi-Long Guo, Fang-Teng Su

Journal of Electrochemistry

The painted steel sample whose coating contained anticorrosive pigment has been investigated by Raman spectroscopy. The protective mechanism of aluminum triphosphate pigment for A3 steel is proposed as follows: Aluminum triphosphate can be dissolved and arrive at the surface of the steel.The dissolved triphosphate ions can complex with ferric ions.And the new products, namely ferric triphosphate, can strongly adhere at the surface of the steel by chemical bonds slowly. At last, a compact protective film, which effectively separates the steel substrate from the aggressive media, is formed at the steel surface.

Go to article

First Prev Next Last