Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 691 - 720 of 837

Full-Text Articles in Chemistry

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai Aug 2006

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai

Journal of Electrochemistry

Cytochrome c(Cyto c) was immobilized on the surface of the single-wall carbon nanotube(SWNT) by using the method of adsorption.Infrared spectroscopy indicated that the Cyto c remained in its original structure and did not undergo structural change after its immobilization on the SWNT.The direct electrochemistry of cyto c,which was adsorbed on the surface of the SWNT,was studied by cyclic voltammetry.The voltammetric results demonstrated that the SWNT had promoting effects on the direct electron transfer of Cyto c and also indicated that the immobilized Cyto c retained its bioelectrocatalytic activity to the reduction of H2O2.This modified electrode might …

Go to article

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo2, Hong-Lan Qi, Cheng-Xiao Zhang Aug 2006

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo2, Hong-Lan Qi, Cheng-Xiao Zhang

Journal of Electrochemistry

A pre-oxidative amperometric glucose biosensor incorporated with carbon nanotube,ferrocenemonocarboxylic acid and PbO2 was designed.The interferences coming from reduced substances,such as ascoribic acid and urine acid were eliminated by PbO2.The oxidative current is linear at the potential of +0.40 V(vs.SCE) to the concentration of glucose in the range from 0.50 to 20 mmol·L-1,and the detection limit of glucose is 0.1 mol L-1.The relative standard deviation is 3.3% for seven successive assays at 5.0 mmol·L-1glucose.This biosensors have been applied to determination of the glucose in serum with satisfying results.

Go to article

The Electrochemical Study On Self-Assembled Monolayers Of Sodium Stearate Surfactant On Oil/Water Interface, Li-Na Tang, Feng-Ping Wang, Yong-Chun Zhu Aug 2006

The Electrochemical Study On Self-Assembled Monolayers Of Sodium Stearate Surfactant On Oil/Water Interface, Li-Na Tang, Feng-Ping Wang, Yong-Chun Zhu

Journal of Electrochemistry

The self-assembled monolayers of sodium stearate surfactant on oil/water interface was investigated by CV with copper ion as probe.The self-assembling process includes four stages,and forms a stable assembly.The electrochemical oxidation of copper ion at assembled surface is a combine controlled process both surface and diffusion with regression equation as ip = 9.214-3.889 v1/2 +0.5809v,r=0.9978,compared with the oil covered bared electrode,it is a complete surface controlled.

Go to article

Electrochemical Preparation And Application Of Nanomaterials, Peng Liu, Ye-Xiang Tong, Qi-Qin Yang May 2006

Electrochemical Preparation And Application Of Nanomaterials, Peng Liu, Ye-Xiang Tong, Qi-Qin Yang

Journal of Electrochemistry

Nano materials and nano technology receive great attention all over the world.While electrochemistry has already achieved a great application in industry and it has proved that electrochemistry will play an important role in the field,such as energy source,new materials,life sciences,information sciences,environment and nano sciences.In this paper,the recent developments of electrochemical techniques for the preparing nano materials,application of nano materials in the areas of electrodeposition,batteries,electrocatalysis,sensors are introduced in brief.

Go to article

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu May 2006

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

AucorePtshell nanoparticles with different thicknesses were prepared by using chemical reduction method,and characterized by ultraviolet-visible spectroscopy(UV-Vis),transmission electron microscopy(TEM) and cyclic voltammetry(CV).The electrocatalytic activity of AucorePtshell nanoparticles with the mean diameter of 70~80 nm to methanol oxidation was investigated by cyclic voltammetry in the acid solution.The results revealed that the prepared core-shell nanoparticles were covered by Pt shell and exhibited the similar optical property and electrocatalytic activity with the normal Pt surface.Moreover,the electrocatalytic activity increased with the electrochemical sweep in the certain potential range.It might be contributed by the special loose structure of Pt shell …

Go to article

Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin Feb 2006

Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin

Journal of Electrochemistry

The nano-crystalline TiO2 electrodes were prepared by spread method,electrodeposition and sol-gel method.The experimental results show that the nano-crystalline TiO2 electrodes have special photoelectrochemical response-the photocrrent-potential curves appear peaks.The special photoelectrochemical behaviors of nano-(crystalline) TiO2  electrodes are ascribed to nano-structure as well as special light induced redox reaction mechanism of nano-crystalline semiconductor electrodes.

Go to article

Electrochemistry And Structures Of Silicon Surface, Gregory X.Zhang Feb 2006

Electrochemistry And Structures Of Silicon Surface, Gregory X.Zhang

Journal of Electrochemistry

Accurate control and fabrication of silicon surface structures from atomic scale to micrometer scale,which may be randomly associated with surface roughness or have well defined patterns,is critical for the per-formance and reliability of electronic devices.Electrochemical reactions of silicon in solutions involved in wetcleaning and etching of silicon wafer play an importantrole in determining the structures of silicon surface.Atre-mendous amount of researches have been done in the last several decades to understand and control a range ofcomplex electrochemical reactions at silicon/solution interface and their relations to the resulted surface struc-tures.The findings generated from these research efforts have been compiled and integrated …

Go to article

Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen Feb 2006

Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen

Journal of Electrochemistry

Nano Pt/C electrocatalysts were prepared by intermittent microwave heating method.The electrooxidation of glucose on smooth Pt and～Pt/C electrodes has been studied and compared.The results showed that the electrochemical properties on nano Pt/C were improved due to the reduction of the overpotential and the increase in the kinetic rate.The surface area would be significantly increased when the particle size of the catalyst was reduced to nano-scale,resulting in the increase in the activity.The enhancement in the resistance to poisoning could be explained that the oxygen-containing species are easier to react with poisoning species on nano Pt/C and re-active the electrode.

Go to article

Development On Hydriding/Dehydriding Kinetics Of Mg Nano-Materials For Hydrogen Storage, Wei Mo, Hong-Liang Sun, Hai-Chang Zhang, Hua-Bin Yang, Zuo-Xiang Zhou Feb 2006

Development On Hydriding/Dehydriding Kinetics Of Mg Nano-Materials For Hydrogen Storage, Wei Mo, Hong-Liang Sun, Hai-Chang Zhang, Hua-Bin Yang, Zuo-Xiang Zhou

Journal of Electrochemistry

The development of Mg nano-materials for hydrogen storage in the recent decade has been reviewed in this paper.It was shown the Mg nano-powders prepared by high-energy ball milling showed promising hydriding and dehydriding performance with the transition metal oxides and other types of hydrogen storage alloys(ABx)as the catalysts.

Go to article

Electroless Nickel Plating On Carbon Nanotube With Non-Palladium Activation Procedure, Guang-Hui Hu, Hui-Huang Wu, Fang-Zu Yang Feb 2006

Electroless Nickel Plating On Carbon Nanotube With Non-Palladium Activation Procedure, Guang-Hui Hu, Hui-Huang Wu, Fang-Zu Yang

Journal of Electrochemistry

A new procedure of surface activation without using palladium salt was proposed for electroless nickel plating on carbon nanotubes.In the procedure,carbon nanotubes were oxidized by nitric acid and then neutralized with NaOH to create carboxyl surface groups which were used to adsorb Ni2+ ions,thereafter the adsorbed Ni2+ ions were chemically reduced into Ni nano-particles as a catalytic center for electroless nickel deposition,all these were further confirmed by infrared absorption spectra and electron microscopic observations.The results indicate that the procedure is feasible to electroless nickel plating on carbon nanotubes.The different morphology of deposits obtained from electroless plating was also …

Go to article

An Investigation On Poly(Vinyl Chloride-Co-Isobutyl Vinyl Ether) Coatings Modified By Rutile Nano-Tio2 Pastes, Xiang Bin, Sheng-Tao Zhang, Yan Li, Bao-Rong Hou Nov 2005

An Investigation On Poly(Vinyl Chloride-Co-Isobutyl Vinyl Ether) Coatings Modified By Rutile Nano-Tio2 Pastes, Xiang Bin, Sheng-Tao Zhang, Yan Li, Bao-Rong Hou

Journal of Electrochemistry

The anti-corrosion coating of Poly(Vinyl Chloride-Co-Isobutyl Vinyl Ether) (PVCCIVE) was modified by rutile nano-TiO2. The influence of nano-TiO2 pastes on the coating's corrosion resistance was investigated through electrochemistry impedance spectroscopy (EIS). The results show that the addition of nano-TiO2 pastes does not have obvious effect on the coating's performance of adhesion, flexility, impact resistance, but improves the coating's UV resistance and the gloss.Meanwhile,with the proper addition of rutile nano-TiO2 pastes, the anti-corrosion behavior of the coating was advanced.

Go to article

The Electrocatalystic Investigation Of 3,4-Dihydroxybenzoic Acid On The Modified Multiply Wall Carbon Nanotubes, Ming-Qi Li, Duo-Chang Cai, Xiao-Ying He Nov 2005

The Electrocatalystic Investigation Of 3,4-Dihydroxybenzoic Acid On The Modified Multiply Wall Carbon Nanotubes, Ming-Qi Li, Duo-Chang Cai, Xiao-Ying He

Journal of Electrochemistry

The electrochemical behavior of 3,4-Dihydroxybenzoic acid(DHBA) on modified multiply wall carbon nanotubes electrode was investigated by cyclic voltammetry(CV) and square wave voltammetry(SWV). Results show that in 0.1 mol/L HCl solutions the modified carbon nanotube electrode has an obvious electrocatalytic effect on the oxidation and deoxidization of DHBA. The oxidation current of DHBA is linear to it's concentration in the range of 4.0×10-6～1.0×10-4 mol/L and 2.0×10-4～8.0×10-4 1mol/L with correlation coefficient of 0.9995 and 0.9992. The detection limit is 1.0×10-6 mol/L.

Go to article

Surface And Sructure Investigations Of Membrane Electrode Assembly In Dmfc Lifetime Testing, Xuan Cheng, Cheng Peng, Meng-Di You, Jing Liu, Ying Zhang Aug 2005

Surface And Sructure Investigations Of Membrane Electrode Assembly In Dmfc Lifetime Testing, Xuan Cheng, Cheng Peng, Meng-Di You, Jing Liu, Ying Zhang

Journal of Electrochemistry

The lifetime and performance of a direct methanol fuel cell (DMFC) were investigatedto understand the correlation between thestructure of catalysts/membrane and cell performanceversus time. The cell polarization and performance curves were obtained during the DMFC operation with the time. The catalysts and Nafion membrane of the membrane electrode assembly (MEA) from the lifetime test were comprehensively examined by XRD, HRTEM, FTIR and Raman spectroscope techniques. The results revealed that there was significant performance degradation during the first 200 hours operation; while the degradation was slowing down between 200 and 704 hours operation. The degradation became worse after 1002 h operation. …

Go to article

The Application Of Astm C1202-93 On Evaluating The Performance Of Anti-Corrosion Of Concrete, Yuan-Chen Yuan, Tsung-Yueh Tu, Chao-Lung Hwang Aug 2005

The Application Of Astm C1202-93 On Evaluating The Performance Of Anti-Corrosion Of Concrete, Yuan-Chen Yuan, Tsung-Yueh Tu, Chao-Lung Hwang

Journal of Electrochemistry

The test of chloride ion penetration based on the standards of ASTM C1202-93 is applied to evaluate the anti-corrosion performance of concrete in this research. Concrete specimens were produced according to ACI 318-89 mixture proportioning design and the Desenfied Mixture Design Algorithm (DMDA) and were measured the 6-hour coulombs at the age of 91 days. Results show that w/b is not the factor influencing chloride penetration of ACI concrete, as the ion penetration of ACI specimens is all higher than 2 000 Coulombs and can even be poorer than 10 000 Coulombs. With a proper amount of pozzolanic material, the …

Go to article

Cyclic Voltammetry And Surface Enhanced Raman Spectroscopy Of Dissociative Adsorption Of Ethanol On Pt-Ru Electrodes, Bin Zhang, Hai-Hui Zhou, Zu-Biao Wen, Qi-Ling Zhong, Peng Huang, Xiong-Yuan Yang, Bin Ren, Tian Aug 2005

Cyclic Voltammetry And Surface Enhanced Raman Spectroscopy Of Dissociative Adsorption Of Ethanol On Pt-Ru Electrodes, Bin Zhang, Hai-Hui Zhou, Zu-Biao Wen, Qi-Ling Zhong, Peng Huang, Xiong-Yuan Yang, Bin Ren, Tian

Journal of Electrochemistry

The behaviors of dissociative adsorption of ethanol on roughened platinum-ruthenium electrode with high activity of SERS were studied by using cyclic voltammetry and in-situ surface enhanced Raman spectroscopy, surface enhanced Raman spectra of dissociative adsorption of ethanol on Pt electrode in acid was obtained for the first time. It is shown that the Pt-Ru could lower the over-potential of CO oxidation when compared to Pt electrode. The results show that the ethanol in acid medium can be self-dissociated at Pt-Ru electrode to produce CO, which discourage the further oxidation of ethanol, some information of Pt-C and Pt-C-Pt stretching vibration from …

Go to article

Surface-Enhanced Raman Spectra Of Cytosine Adsorbed On A Roughened Gold Electrode, Yuan-Fei Wu, Jian-Feng Li, De-Yin Wu, Bin Ren, Zhong-Qun Tian Aug 2005

Surface-Enhanced Raman Spectra Of Cytosine Adsorbed On A Roughened Gold Electrode, Yuan-Fei Wu, Jian-Feng Li, De-Yin Wu, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Cytosine adsorbed on a roughened gold electrode has been investigated by using electrochemical cyclic voltammetry and surface-enhanced Raman spectroscopy (SERS). The results indicate that cytosine was adsorbed on the Au electrode in a perpendicular orientation via the N3 position. As the maximum enhancement of ring breathing mode appears at negative potentials compared with other modes, both the electromagnetic enhancement and the charge transfer mechanism were considered to contribute to the SERS intensity. The binding interaction between cytosine and the gold electrode was weakened when the potential was negatively moved. The result also indicates that the SERS technique can be used …

Go to article

The Research Of Nano-Sized Nio Anode Materials For Lithium Ion Batteries, Jun-Mei Yan, Jing Zhang, Yong Yang Aug 2005

The Research Of Nano-Sized Nio Anode Materials For Lithium Ion Batteries, Jun-Mei Yan, Jing Zhang, Yong Yang

Journal of Electrochemistry

The nano-sized NiO materials were synthesized by solid phase method and sol-gel method. The synthesis conditions were optimized by DSC and TG techniques. The sol-gel method was optimized by changing the solvent and regulating the solution's pH for preparing NiO material. The structure and morphology of the materials were also characterized by means of XRD and TEM techniques, and the electrochemical performances of the materials were studied by the galvanostatically charge and discharge experiments.

Go to article

Investigation, On The Accelerated Dissolution Of Metal Induced By Afm Tip Scratching And Suppressed By Inhibitors, Jun-E Qu, Xing-Peng Guo Aug 2005

Investigation, On The Accelerated Dissolution Of Metal Induced By Afm Tip Scratching And Suppressed By Inhibitors, Jun-E Qu, Xing-Peng Guo

Journal of Electrochemistry

The accelerated dissolution behavior of Cu-Ni alloy induced by AFM tip scratching and the inhibition effect of corrosion inhibitors were investigated. The results showedthat, with a tip loading of 750nN, continuous scan for 30 min in a contact mode on 4×4 μm2 of copper-nickel alloy in 1.5mol/L NaCl and 0.01mol/L HCl could enhance the dissolution of the sample and produced pits on the scratched area. Adding inorganic inhibitors, sodium chromateand organic inhibitor dodecylamine, to the solution suppressed the dissolution of copper-nickel alloyinduced by tip scratching, respectively, by improving the surface passivationperformance of metal surface and forming adsorption films on …

Go to article

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi Aug 2005

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi

Journal of Electrochemistry

The catalytic splitting decomposition of carbon nanotubes isprocessed by dispersing with dilute nitric acid and thermal oxidation. Then well-proportionedphenolic resin is mixed in the carbon nanotubes. Then, the carbon nanotubesare made into electrodes by hot-press molding after the process of milling with high speed. The surface of the carbon nanotubes electrodes is analyzed by SEM. Active red X-3B simulated waster water is disposed by carbon nanotubes catalyticelectrode (anode) and stainless steel(cathode). The influencing factors of degradation by current density, concentrationof electrolyte, systemtemperature and pH are investigated. The experimental results indicated that acidiccondition is propitious tothe degradationreaction of organicdyestuff and wastewater …

Go to article

Fabrication Of Nano Capacitor And Its Electrical Properties, Ling Liu, Qin Zhou, Neng-Qin Jia, Zhi-Yu Jiang May 2005

Fabrication Of Nano Capacitor And Its Electrical Properties, Ling Liu, Qin Zhou, Neng-Qin Jia, Zhi-Yu Jiang

Journal of Electrochemistry

A step-by-step assembling method was developed for preparing nano capacitors using anodic aluminum oxide (AAO) membrane as templates. The nano capacitor consisted of three parts: electrochemically polymerized PPy electrode/ el ectrochemically precipitated porous TiO2 separator/chemically polymerized PPy electrode, and demonstrated the charge/discharge behavior as a typical electrochemical supercapacitor with good cyclic ability.

Go to article

Preparation, Characterization And Electrochemical Properties Of Nano Tio2-Cnt-Pt On Ti Substrate Complex Electrode, Dao-Bao Chu, De-Xiang Feng, Jin-Hua Zhang, Xiao-Hua Li May 2005

Preparation, Characterization And Electrochemical Properties Of Nano Tio2-Cnt-Pt On Ti Substrate Complex Electrode, Dao-Bao Chu, De-Xiang Feng, Jin-Hua Zhang, Xiao-Hua Li

Journal of Electrochemistry

The nanoTiO2-CNT-Pt on Ti substrate complex electrodes were prepared from precursor of (Ti(OEt)4) directly hydrolyzed and by cyclic voltammograms electroplating method . The XRD and SEM results showed that the nano TiO2 (anatase) particle sizes ranged 5~10 nm and the Pt nanoparticle (average size 9nm) dispersed uniformly on nanoTiO2-CNT film surface. The electrocatalytic activity of Ti/nanoTiO2-CNT-Pt electrode was investigated by cyclic voltammetry and chronopotentiogram. The results indicated that the Ti/nanoTiO2-CNT-Pt electrode exhibited very high electrocatalytic activity and stability for the electro-oxidation of methanol at room temperature. When Pt loading …

Go to article

Using Electrodeposition To Fabricate Mould For Polymer Microfluidic Chip, Yi Luo, De-Nan Chu, Zhi-Feng Lou, Chong Liu, Li-Ding Wang May 2005

Using Electrodeposition To Fabricate Mould For Polymer Microfluidic Chip, Yi Luo, De-Nan Chu, Zhi-Feng Lou, Chong Liu, Li-Ding Wang

Journal of Electrochemistry

Many researches have been focused on polymer microfluidic chip in recent years and the mould plays an important role in its fabrication process. Using electrodepositingmethod to fabricate a metal mould for polymer microfluidic chip has been presented in this paper. An ultra-thick photoresist SU-8 was coated on a pretreated metal plate, after photolithography, nickel was electrodeposited in the patterned SU-8, then was removed the SU-8 to obtain a final metal mould. This methodreduces workload of electrodeposit largely. Applying counter current before deposit, adding additive to solution and vacuum anneal after demould have been used to improve the binding force between …

Go to article

The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang Feb 2005

The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang

Journal of Electrochemistry

An improved technique for fabrication of carbon nanotube array electrodes has been proposed in this work. Firstly, carbon nanotubes (CNs) array electrodes were prepared by combsination of Chemical Vapor Decomposition (CVD) method and sputtering techniques in anodized aluminum oxide (AAO) membrane. The CNs/AAO was immersed into HF solution to remove the barrier layer. Controlling the immersing time, the CNs array electrodes with different length contacted with electrolyte can be prepared. The morphology of CNs array electrodes was observed by SEM. The electrochemical properties of CNs array electrodes were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Cyclic voltammetric curves of …

Go to article

The Electrophoretic Deposition Of Nano Hydroxyapatite Coating On Titanium Surface, Fei Chen, Chang-Jian Lin, Zhou-Cheng Wang Feb 2005

The Electrophoretic Deposition Of Nano Hydroxyapatite Coating On Titanium Surface, Fei Chen, Chang-Jian Lin, Zhou-Cheng Wang

Journal of Electrochemistry

A hydroxyapatite coating with nano-structure on the roughened titanium surface was prepared by electrophoretic deposition process. To decrease sintering temperature the HAp nanoparticles synthesizedby a wet chemical method was used. It is observed that the coating is uniform without cracks. After sintering the nano-strueture of HAp coating remains unchanged. The surface treatment of Ti is applied to form a distribution of small pits and TiO2 thin layer that improve the adhesion of coatingto Ti substrate. It is shown that the bonding strength of coating is as high as 18±2.5MPa. The hardness and Young's modulus are 40.6 and 0.42 GPa, …

Go to article

Preparation And Electrochemical Property Of Aao Nano-Channels Filled With Nio, Chi Gu, Jun-Mei Yan, Yong Yang Feb 2005

Preparation And Electrochemical Property Of Aao Nano-Channels Filled With Nio, Chi Gu, Jun-Mei Yan, Yong Yang

Journal of Electrochemistry

The AAO template with nano-channels was synthesized and filled with transient metal-oxide NiO by sol-gel method, and their electrochemical properties were primarily studied. The results showed that the porous nano-channels were well defined with the diameter about 50nm. The nano-structured NiO was filled into the template's nano-channels successfully. Cyclic voltammetry studies show that the NiO in AAO template has good cycle stability. It was suggested that the AAO-metal-oxides composites could be used as novel anode materials for Lithium ion battery.

Go to article

Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma Nov 2004

Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma

Journal of Electrochemistry

The air electrodes with different mass ratio of Pt/active carbon or carbon nanotube as catalyst layer material have been prepared. The electrocatalytic performances for oxygen reduction were evaluated by means of polarization curve and electrochemical impedance spectroscopy (EIS). The results disclosed that carbon nanotubes dealt with nitric acid in the catalyst layer had been improved obviously on the electrocatalytic activity. After the surface of carbon nanotube was oxygenated and aggraded with platinum, the catalyst had obviously effects on the electrocatalytic activity. The air electrode with the mass ratio of active carbon to Pt/carbon nanotube in 4∶1 showed better electrocatalytic activity, …

Go to article

Chemical Microetching Of Three-Dimensional Gear-Like Pattern On Nickel Surface, Zhu-Fang Liu, Li-Ming Jiang, Jing Tang, Li Zhang, Zhong-Qun Tian, Zhao-Wu Tian, Pin-Kuan Liu, Li-Ning Sun Aug 2004

Chemical Microetching Of Three-Dimensional Gear-Like Pattern On Nickel Surface, Zhu-Fang Liu, Li-Ming Jiang, Jing Tang, Li Zhang, Zhong-Qun Tian, Zhao-Wu Tian, Pin-Kuan Liu, Li-Ning Sun

Journal of Electrochemistry

The chemical micromachining on nickel surface with three-dimensional (3D) gear-like mold was realized by confined etchant layer technique (CELT). By using effective chemical etching and scavenging system (HNO3 +NaOH) and optimizing experimental parameters, such as the etching time, etching current density, concentration of the etchant or and scavenger, we obtained the etched pattern, which is close to negative copy of the mold. The etched micro-pattern characterized by SEM and AFM, demonstrates that CELT can be applied to the 3-D microstructure replication on nickel surface.

Go to article

Lithium Insertion Into Tio2(B) Nanobelts Synthesized By The "Soft Chemical" Method, Cha-Geng Nie, Zheng-Liang Gong, Lan Sun, Juan Zuo, Yue-Kun Lai, Chang-Jian Lin Aug 2004

Lithium Insertion Into Tio2(B) Nanobelts Synthesized By The "Soft Chemical" Method, Cha-Geng Nie, Zheng-Liang Gong, Lan Sun, Juan Zuo, Yue-Kun Lai, Chang-Jian Lin

Journal of Electrochemistry

TiO2(B) Nanobelts were synthesized by using the "Soft chemical"method. The products were characterized by means of transmission electron microscope(TEM), X-ray diffraction(XRD), Raman spectrum and energy dispersive spectrum(EDS). Galvanostatic charging and discharging tests showed that lithium-ion intercalation/deintercalation occurred reversibly in the TiO2(B) nanobelts electrode, and a high capacity (265 mAh·g-1) can be obtained. The results suggested that TiO2(B) Nanobelts might be a promising negative electrode material of second Lithium battery.

Go to article

Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai, Jing Chen May 2004

Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai, Jing Chen

Journal of Electrochemistry

The redox proteins (enzymes), such as hemoglobin (Hb), horseradish peroxidase (HRP) and glucose oxidase (GOx) were immobilized on the surface of the carbon nanotube modified with glassy carbon (CNT/GC) electrode, respectively. The experimental results showed that the redox proteins (enzymes) underwent effective and stable direct electron transfer reaction at the surface of CNT/GC electrode with a pair of nearly symmetrical redox peaks in phosphate buffer solution. The formal redox potential, E0' , is almost independent on the scan rates, the average value of E0'  for Hb, HRP and GOx is -0.343±0.001, -0.319±0.002 and -0.456±0.001 V (vs.SCE,pH 6.9), respectively. …

Go to article

Studies Of Infrared Optical Properties Of Palladium Nanoparticles With Different Sizes And Dispersed States, Yan-Xia Jiang, Hong-Gang Liao, Wei Chen, Shi-Gang Sun May 2004

Studies Of Infrared Optical Properties Of Palladium Nanoparticles With Different Sizes And Dispersed States, Yan-Xia Jiang, Hong-Gang Liao, Wei Chen, Shi-Gang Sun

Journal of Electrochemistry

Pd nanoparticles with different sizes and dispersed states were prepared. Their infrared optical properties were studied with CO molecule probe. The infrared spectroscopic investigation revealed that Pdn of 6.6 nm and Pdn(cube)of 100～150nmexhibit normal IR absorption. The center of IR bands are around 1970 cm-1 and 1910cm-1. Pdnis introduced into the surface of electrode, and is induced by interface electric fieldto form the aggregation of nanoparticles Pdn(ag). The Pdn(ag) has a different IR optical property from Pdn. The direction of IR absorption band of Pdn …

Go to article

First Prev Next Last