Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3271 - 3300 of 3579

Full-Text Articles in Chemistry

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao May 1999

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao

Journal of Electrochemistry

With cycling voltammetry curve(C-V), TEM and SEM photographs, the influence of PTFE and Nafion on the platinum utilization in catalyst layer of PEMFC was investigated. The results show that in gas diffusion electrode, the blocking effect of PTFE in the platinum utilization is not pronunced. In the thin-film catalyst layer, the electron conduct of the catalyst was blocked by the nafion solid and this caused the decrease of platinum utilization. With the increase of the nafion content in the catalyst layer, both platinum utilization and the electron conductivity decreased in the catalyst layer. Because the molecule size of nafion is …

Go to article

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu May 1999

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu

Journal of Electrochemistry

A novel method for preparation of gold-film composed of ultra-fine gold particles was reported in this paper. The gold-film was prepared by electrochemical method on the surface of the paste electrode modified with the strain Bacillus sp. D01 which has strong ability to absorb and reduce Au3+. In addition, this paper reported an experimental method of determining trace amount of Cu2+ in water solution using cathodic stripping analysis to estimate the performances of the obtained gold-film. The experimental results indicated that this new method for preparation of gold-film is simple. The obtained gold-film electrode is stable and …

Go to article

Electochemical Measuments Of Defective Coatingson Buried Steel Substrates, Shi-Zhe Song, Shi-Jiu Jin, Xiao-Ping Song, Yun-Hai Xu, Jian Li, Yu-Ping Liao, Guang-Sen Lai, Ling-Li Liu May 1999

Electochemical Measuments Of Defective Coatingson Buried Steel Substrates, Shi-Zhe Song, Shi-Jiu Jin, Xiao-Ping Song, Yun-Hai Xu, Jian Li, Yu-Ping Liao, Guang-Sen Lai, Ling-Li Liu

Journal of Electrochemistry

An electrochemical technique to detect the defects and detachments of the protective coating on the steel structures with electrochemical impedance spectroscopy (EIS) was offered. A new parameter K, which was defined as the ratio of the electrode resistance amplitude at a certain frequency to that at minimal frequency was obtained in present paper. The results indicated that the change of K at a certain range of frequency reflected the condition of protective coating. The technique was found to be very useful in estimating the different conditions of protective coating after being applied to the carbon steel samples covered with tar …

Go to article

Study Of Localized Corrosion Of Metals By Using The Electrochemical Techniques With Spatial Resolution, Chang-Jian Lin, Xiang-Dong Zhuo, Zu-De Feng, Rong-Gui Du, Zhao-Wu Tian Feb 1999

Study Of Localized Corrosion Of Metals By Using The Electrochemical Techniques With Spatial Resolution, Chang-Jian Lin, Xiang-Dong Zhuo, Zu-De Feng, Rong-Gui Du, Zhao-Wu Tian

Journal of Electrochemistry

The electrochemical inhomogeneities at interface of metal/solution play an important and often controlling role in localized corrosion of metals. The traditional electrochemical techniques involving potential, current density or ac impedance measurements over bulk specimens can only provide average and general information of the interface. Thus, the development of in situ imaging techniques is essential for further characterizing electrochemical inhomogeneities at the metal/solution interface of localized corrosion system. The electrochemical techniques with spatial resolution,including scanning single micro electrode, scanning double micro electrodse and scanning micro chemical probes are reviewed. The effects of electrochemical inhomogeneities on the corrosion behavior, and the mechanism …

Go to article

Electrochemical Surface Characterization Of Titanium Alloy(Ti-6al-4v), Jian-Zhong Chen, Qing-Liang Gao, Zhong-Yi Wang, Wen-Jing Xue Feb 1999

Electrochemical Surface Characterization Of Titanium Alloy(Ti-6al-4v), Jian-Zhong Chen, Qing-Liang Gao, Zhong-Yi Wang, Wen-Jing Xue

Journal of Electrochemistry

With its low density and high strength ratio, titanium alloy(Ti6Al4V) has become one of the most important materials both in the fields of aerospace and biomedical assays. Recently, titanium alloy was used as the implantation materials in human body because of its biocompatibility. The elecrochemical impedance techniques were then used to investigate the corrosion behavior of this material in hydrochloride and sulfuric acid solutions. A comparison between impedance spectra and anodic polarization over the correlated range of applied voltage confirms that AC impedance data can be used as a powerful tool for surface characterization of titanium …

Go to article

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan Feb 1999

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A reaction kinetic study for electrochemical oxidation of benzene was performed on a PbO2 rotating disk electrode in 1 mol/L H2SO4 aqueous solution. The reaction orders, the activation energies and transfer coefficient were measured, and the kinetic expression was obtained.

Go to article

Pitting Corrosion Of Ni-Based Alloy In Thiosulfate-Ion Containing Chloride Solutions, Yung-Fa Lee, Ting-Yu Wang, Wen-Ta Tsai Feb 1999

Pitting Corrosion Of Ni-Based Alloy In Thiosulfate-Ion Containing Chloride Solutions, Yung-Fa Lee, Ting-Yu Wang, Wen-Ta Tsai

Journal of Electrochemistry

The effect of thiosulfate ion on the pitting corrosion behavior of Ni-Based Alloy 690 in chloride solution was investigated. In plain sodium thiosulfate solution, Alloy 690 was immune to pitting corrosion. However, the addition of low concentration of sodium thiosulfate can enhance the initiation of pitting corrosion of Alloy 690. Nevertheless, inhibition of pitting corrosion was observed at high concentration of addition.

Go to article

Effect Of Stress On Electrochemical Behaviour Of Various Thermal History Zones And Different Phase Structures On The Weldment For Low Alloy Steel, Yin-Shun Wu, De-Yu Liu, Bei Cao, Feng-Li Wang, Zhi Fang, Lin Zhang, Zheng-Rong Zhang, Hai Yang Feb 1999

Effect Of Stress On Electrochemical Behaviour Of Various Thermal History Zones And Different Phase Structures On The Weldment For Low Alloy Steel, Yin-Shun Wu, De-Yu Liu, Bei Cao, Feng-Li Wang, Zhi Fang, Lin Zhang, Zheng-Rong Zhang, Hai Yang

Journal of Electrochemistry

The electrochemical behaviour of various thermal history zones on the weldment for steel 16Mn and also of the ferrite, pearlite in various zones was measured by use of a self-developed measuring technique for investigating the electrochemicl behaviour of single and mixed phase structures in metal materials. Especially the effect of stress on this electrochemical behaviour was investigated. The results showed that by comparison with non-stress condition, the free corrosion potential of the various thermal history zones and of the ferrite, pearlite under stress condition was shifted in negative direction, correspondingly their free corrosion current density was increased, the free corrosion …

Go to article

Structural And Electrochemical Studies On Todorokite/Vernadite As Cathodes For Rechargeable Lithium Ion Batteries, Wei Chu, De-Yao Liu, Jin-Kua You, Yong Yang, Zu-Geng Lin Feb 1999

Structural And Electrochemical Studies On Todorokite/Vernadite As Cathodes For Rechargeable Lithium Ion Batteries, Wei Chu, De-Yao Liu, Jin-Kua You, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

XRD, TEM, ICP, low scan-rate CV and charge/discharge tests were carried out for the studies on the structural and electrochemical behavior of a prepared 3 V manganese oxide cathode for rechargeable lithium ion batteries.XRD analysis revealed that the cathode sample is mainly composed of tunneled Todorokite and layered Vernadite. TEM investigation confirmed that the morphology of the sample is a laminated construction with approximate 10nm layer space. The reversibility of Li+ removal/intercalation and structural stability of this sample framework to lithium insertion are good in CV and charge/discharge tests. The discharge capacities were found to be about 129mAh/g obtained …

Go to article

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song Feb 1999

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song

Journal of Electrochemistry

The surface of the spherical nickel hydroxide particles used as an active material in pasted nickel electrodes is surface-deposited with cobalt. This paper investigated the effects of the amount of cobalt deposit on the characteristics of nickel hydroxide electrode. The performances of the electrode, such as discharge capacity, utilization of active material and reversibility of Ni(OH)2/NiOOH redox reaction, were studied by comparing the charging/discharging curves and cyclic voltammograms. The mechanism of action of cobalt deposits has been described in terms of the electrochemical impedance spectroscopy of nickel hydroxide electrode.

Go to article

Study On Ionic Conductivity Of A Novel Solid State Electrolyte, Ying-Xin Zhao, Chang-Yan Liu Feb 1999

Study On Ionic Conductivity Of A Novel Solid State Electrolyte, Ying-Xin Zhao, Chang-Yan Liu

Journal of Electrochemistry

Various novel predominantly lithium-ion-conducting solid state electrolytes were described, which had high conductivity at room temperature. It comprised low-melting-point eutectic lithium salts in which a small amount of an single ion polyeletrolyte poly(lithium acrylate) was dissolved to rubberize them. The effects of the eutectic and polymer features upon the ionic conductivity were discussed.

Go to article

Electrohydrodimerization Of Fumarodinitrile On Liquid Gallium Electrode, He Wei, Huang Ying, Sheng-Tao Zhang Feb 1999

Electrohydrodimerization Of Fumarodinitrile On Liquid Gallium Electrode, He Wei, Huang Ying, Sheng-Tao Zhang

Journal of Electrochemistry

Electrohydrodimerization (EHD) of fumarodinitrile on liquid gallium electrode can take place not only in hydrotropic solution of tetraethylammonium p-toluenesulphonate (TEA-PTS), but also in aqueous solution containing low concentration of strong surfactants, such as TritonX-100. In solution without organic surfactant, FDN yields a single two-electron reduction wave corresponding to the formation of a saturated monomer called as butanedinitrile. If some TEA-PTS or TritonX-100 is added into the solution, the original two-electron wave is splitted into two continuous single-electron reduction wave and corresponding EHD of fumarodinitrile is obtained.

Go to article

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi Feb 1999

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi

Journal of Electrochemistry

Separating the functions of current collection and gas flow distribution and then to design two separate elements to achieve the desired performance characteristics, a nonconventional cell structure for proton exchange membrane fuel cells bave been developed. The current collector is achieved using a thin stain steel sheet, the gas flow distribution is achieved using a carbon paper that has the desired chemical durabiliy when in contact with the proton exchange membrane. Combining these two separate elements into a single divice yields a bifunctional device that performs as a bipolar separator plate. The advantages of this alternative appproach to making biplar …

Go to article

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang Feb 1999

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang

Journal of Electrochemistry

There exist two oxidation current peaks on the anodic polarization curve between -0.7 V and 0 V (SCE) in Na-hypophosphite solution. Peak Ⅰ (-0.55 V, SCE) , which represents the oxidation process from H2PO2- to H2PO3-, has been studied previously. Peak Ⅱ, which is located at the potential about -0.4 V (SCE), is investigated emphatically in this paper. The results show that, peak Ⅰ and Ⅱ are corresponding to two successive steps in oxidation process of H2PO2-, i.e. peak Ⅱ corresponds to the oxidation process of …

Go to article

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji Feb 1999

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji

Journal of Electrochemistry

A new polymer E-T was synthesized and used as a corrosion inhibitor for reinforced concrete. The inhibitive behavior and mechanism were studied with linear polarization, Tafel polarization, EIS and XPS method in simulated pore solution system with concrete samples. The result showed that the polymer was a mixing type inhibitor. A 1% dosage was sufficient to imhibit the corrosion of steel in simulated pore solution system. The salt endurance was enhanced from 0.02 mol/L to 0.10 mol/L. The result also showed the good synergetic effect of NaNO2, especially in low NaNO2 concentration. The EIS showed that E-T …

Go to article

Study On The Mechanism Of Ni/Zro2 Composite Electrodeposition, Qun-Jia Peng, Dao-Bin Mu, Ju-Sheng Ma, Xiang-Yun Tang Feb 1999

Study On The Mechanism Of Ni/Zro2 Composite Electrodeposition, Qun-Jia Peng, Dao-Bin Mu, Ju-Sheng Ma, Xiang-Yun Tang

Journal of Electrochemistry

The effects of cathodic current density and amount of particle dispersion in solution on the codeposition of Ni/ZrO2 composite in Watts bath were studied, and the machanism of the composite electrodeposition was investigated. The study shows that the composite electrodeposition is controlled by the transfer of particles to the cathode when the dispersion amount is small, causing the decrease of the codeposition with the increase of current density. With large amount dispersion, the composite electrodeposition is first controlled by the strong adsorption of particles on the cathode at low current density, resulting in the increase of the codeposition with …

Go to article

Electrodeposition Of Neodymium-Iron Group Alloy Films In (P-Ch3C6H4So3)3Nd System, Peng Liu, Ye-Xiang Tong, Qi-Qin Yang, Yan-Sheng Yang Feb 1999

Electrodeposition Of Neodymium-Iron Group Alloy Films In (P-Ch3C6H4So3)3Nd System, Peng Liu, Ye-Xiang Tong, Qi-Qin Yang, Yan-Sheng Yang

Journal of Electrochemistry

Neodymium p-toluenesulfonate was prepared and applied to the electrodepositon of neodymium-iron group alloy films. This salt has high solubility in DMF and can be dehydrated easily. Cyclic voltammograms of Pt electrode in (p-CH3C6H4SO3) 3Nd + MCl2(M=Fe,Co,Ni) + DMF indicated that the neodymiun-iron group alloys can be elcetrodeposited from this medium, the Nd-Fe, Nd-Co and Nd-Ni films were obtained by electrolysis at constant potential. The Nd-Fe, Nd-Co and Nd-Ni films are amorphous in which the rare earth contents are in the range of 15 at%～60 at% as analyzed by XRD and …

Go to article

Study On Steel Corrosion In Simulated Biofilm Environment In Seawater, Qing-Fei Wang, Jing Sui, Run-Xi Su, De-Ying Kong, Shi-Zhe Song Feb 1999

Study On Steel Corrosion In Simulated Biofilm Environment In Seawater, Qing-Fei Wang, Jing Sui, Run-Xi Su, De-Ying Kong, Shi-Zhe Song

Journal of Electrochemistry

Biofilm is one of the main factors that influence metal corrosion in seawater environment. According to the structure and property of biofilm, a natural biopolymeric gel, calcium alginate(an extracellular biopolymer containing carboxylate functional groups) can deposite on metal surfaces to form films. Corrosion behavior of alloyed steel E2, 10CrMoAl and 18-8 stainless steel were studied in simulated biofilm environment by various electrochemical methods ,including measurements of the corrosion potential, polarization curves,galvanic current and electrochemical impedance. The results show that such an approach is informative to reveal “how” and “to what extent” biofilm can influence the metal corrosion process.

Go to article

Observation And Application Of Optical Interference And Diffraction Effects In Reflection From Photochemically Fabricated Gaussian Interfaces, Lynne Koker, Kurt W. Kolasinski Jan 1999

Observation And Application Of Optical Interference And Diffraction Effects In Reflection From Photochemically Fabricated Gaussian Interfaces, Lynne Koker, Kurt W. Kolasinski

Chemistry Faculty Publications

No abstract provided.

Go to article

The Effect Of Suspended Particles On The Corrosion Resistance Of Electrodeposited Zinc Powders, Qing-Wen Li, Qing Yang, Xi Xia Nov 1998

The Effect Of Suspended Particles On The Corrosion Resistance Of Electrodeposited Zinc Powders, Qing-Wen Li, Qing Yang, Xi Xia

Journal of Electrochemistry

Zinc powders were electrodeposited from ZnCl2 baths with containing suspension of unsoluble particles such as graphite, PbO2, SnO2, TiO2, SiO2 etc.. The structure, morphology and corrosion behavior of zinc powder were analyzed. SEM results showed that the dendritic growth of zinc can be inhibited by applying the suspension method. Suspension of PbO2, SnO2, TiO2, SiO2 and In2O3 could greatly improve the corrosion protection of zinc powder in 5 mol/L KOH. In addition, fractal theory is employed to further explain the results

Go to article

The Study On The Performance Of Mcfc Matrix Prepared By Flow Cast, Hua-Xin Lin, Bao-Lian Yi, Nai-Chao Li, Tian-Xi Qu, En-Jun Zhang, Lian-Yin Kong, Ying-Cai Chen Nov 1998

The Study On The Performance Of Mcfc Matrix Prepared By Flow Cast, Hua-Xin Lin, Bao-Lian Yi, Nai-Chao Li, Tian-Xi Qu, En-Jun Zhang, Lian-Yin Kong, Ying-Cai Chen

Journal of Electrochemistry

The matrix for MCFC were prepared by flow cast technique which gives reproducible and reliable results. Its mean pore radius is about 0.18 μm, and the porosity is about 65%. The performance of MCFC stacked with this type of matrix is 0.854 V at 200 mA/cm2.

Go to article

Oxygen Evolution Behavour On Ni Electrode In Koh Solution, Xiao-Yan Cao, Hua-Tang Yuan, Zuo-Xiang Zhou, Yun-Shi Zhang Nov 1998

Oxygen Evolution Behavour On Ni Electrode In Koh Solution, Xiao-Yan Cao, Hua-Tang Yuan, Zuo-Xiang Zhou, Yun-Shi Zhang

Journal of Electrochemistry

The steady-state polarization curves of oxygen evolution were measured at temperatures between 22～70 ℃ on Ni electrode in 30 wt.% KOH solution by galvanostat methode. The exchange current densities, Tafel slopes and transfer coefficients were studied. It was found that 40 ℃ is a special temperature, near which the kinetic parameters change abrupdy. The Tafel slopes for oxygen evolution reactions at higher overpotentials change from more than 120 mV to about 70 mV when the temperature raises to 40～70 ℃ from 22～35 ℃. Simultaneously, the heat of activation is changes from 79.88 kJ/mol to 55.32 kJ/mol. Moreover, the -(η/Τ) i …

Go to article

Study On Ni-Co-S-Mo Alloys New Cathode Material For Aquous Electrolysis, Yuan-Shou Xie, Quan-Feng Liu Nov 1998

Study On Ni-Co-S-Mo Alloys New Cathode Material For Aquous Electrolysis, Yuan-Shou Xie, Quan-Feng Liu

Journal of Electrochemistry

The parameters of electrodeposion of Ni-Co-S-Mo alloy were studied. The experimental results indicate that the electrodeposition alloy shows high catalytic activity for hydrogen evolution reaction, as well as better mechanical strength and higher chemical stability. The mechanism of catalytic hydrogen evolution reaction on this type of alloy electrode was also investigated by means of polarization curve and cyclic voltametry.

Go to article

Primary Research Of Reversible Proton Exchange Membrane Regenerative Fuel Cells, Zhi-Gang Shao, Bao-Lian Yi, Ming Han Nov 1998

Primary Research Of Reversible Proton Exchange Membrane Regenerative Fuel Cells, Zhi-Gang Shao, Bao-Lian Yi, Ming Han

Journal of Electrochemistry

In this paper, we report the results of our studies on regenerative proton exchange membrane fuel cell (RPEMRFC) catalysts, electrode preparation and their performances. The Pt catalyst for the oxygen electrode was replaced by 60 w%Pt + 40 w%IrO2 which reduces polarization by 0.2 V in a polymer protone exchange membrane fuel cell. The cycle performance of RPEMRFC was found to be manly effected by the stability of the diffiusion layer of bifunctional oxygen electrode.

Go to article

The Latest World Wide Progress In Solid Oxide Fuel Cell, Yi Jiang Nov 1998

The Latest World Wide Progress In Solid Oxide Fuel Cell, Yi Jiang

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a novel, green electricity generation technology, which has been showing rapid development since 1980's. In light of its high efficiency, environmental friendly, fuel adaptability and long term stability, the Research, Development and Demonstration (RD&D) of this hype of full cell have been emphasized in a large number of developed countries. Based on the information communicated at the latest symposium on SOFC held last year in Aachen (Germany) and the knowledge gained through years of research in this field, a comprehensive review on the latest development of the tubular, this planar SOFC as well as …

Go to article

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai Nov 1998

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai

Journal of Electrochemistry

An amorphous lithium inserting anode material based on Tin oxide glass was synthesized by salification in solution and its properties on lithium intercalation was investigated by X ray diffraction (XRD), microelectrode voltammetry and charge discharge measurements. The results have shown that this kind of material has considerable electrochemical reversibility toward lithium intercalation deintercalation. The available discharge capacity of the material reaches 430 mAh/g with charge-discharge efficiency over 90%, showing a great potential for practical use.

Go to article

The Study Of Poly [N-(3-Ferrocene Acetamino Propyl- Pyrrole] Film Modified Glucose Electrode, Cheng-Yun Tian, Jing Chen, Li Zhang Nov 1998

The Study Of Poly [N-(3-Ferrocene Acetamino Propyl- Pyrrole] Film Modified Glucose Electrode, Cheng-Yun Tian, Jing Chen, Li Zhang

Journal of Electrochemistry

A poly [N-(3-ferrocene-acetamino-propyl-pyrrole)] film modified electrode was fabricated and studied by cyclic voltammetric method. The result shows that the modified electrode can give stable redox peaks of ferrocene, and an obvious catalytic peak due to glucose. This modified electrode was used to tabricate a glucose sensor which operates at +0.2 V, so that the ascorbic acid or uric acid doesn't affect the accuracy detection of glucose concentration. The sensor has a linear range of 0.1～10 mmol/L glucose, which the period of long term stability and response time of the sensor are about ten days and 2 min.

Go to article

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen Nov 1998

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen

Journal of Electrochemistry

Synthesis of butyl butyrate by direct electroxidation of n butyl alcohol and the electrochemical behaviors of several selected conducting oxide electrodes (Pb/PbO2, Ti/PbO2, i/SnO2+Sb2O3/PbO2 and Ti/SnO2+Sb2O3+PdOx/PbO2) have been investigated. The results demonstrated that the intermediate layers of SnO2, Sb2O3 and PdOx could significantly decrease the interfacial resistance of the electrodes, and that the Ti/SnO2+Sb2O3+PdOx/PbO2 electrode possessed better electrocatelytic performance than others.

Go to article

Corrosion Characteristics Of Electrodeposited Ni-Mo-P Alloy Immersed In Nacl Solution, Yue Zeng, Hong-Xin Huang, Xiao-Ming Xiao, Shi-Xun Lian, Su-Wei Yao, He-Tong Guo Nov 1998

Corrosion Characteristics Of Electrodeposited Ni-Mo-P Alloy Immersed In Nacl Solution, Yue Zeng, Hong-Xin Huang, Xiao-Ming Xiao, Shi-Xun Lian, Su-Wei Yao, He-Tong Guo

Journal of Electrochemistry

The corrosion characteristics of electrodeposited Ni-Mo-P alloy immersed in 5wt.% NaCl solution were investigated using immersion, anodic polarization curves, XPS and AES analysis. The corrosion rates of amorphous Ni Mo P alloys are lower than that of crystalline Ni-Mo-P alloys. Anodic polarization curve experiments show that for the electrodeposited Ni-Mo-P alloys, the nickel mol fraction of which has in between 0.719 and 0.868, the corrosion potential moves to positive with the increase of P content, and the peak current value of active region increase with the increase of Mo content in alloys, though the effects of P content on the …

Go to article

Study Of The Effect Of Rare Earth Ions On Dna Using Cyclic Voltammetry And Spectroscopy, Hei-Bai Shen, Yu-Zhuan Kang, Hai-Feng Yang, Lin Yu, Zong-Rang Zhang Nov 1998

Study Of The Effect Of Rare Earth Ions On Dna Using Cyclic Voltammetry And Spectroscopy, Hei-Bai Shen, Yu-Zhuan Kang, Hai-Feng Yang, Lin Yu, Zong-Rang Zhang

Journal of Electrochemistry

The interaction between rare earth ions(e.g. Eu3+ ,Ce3+, Er3+, Sm3+, Tb3+, La3+ and Nd3+) and DNA had been investigated by using Cyclic Voltammetry, Ultraviolet and Raman Spectroscopy. After the adding of Ce3+ ion to DNA solution, the cathodic peak current of Ce3+ ion reduction was found to decrease obviously, and the anodic peak current to decrease even more significantly. Differential UV spectra of Ce3+ ion depicted hyperchromic effect after the reaction of these two species and a new peak of 272 nm was found. Differential …

Go to article

First Prev Next Last