Chemistry Commons^™

Deposition And Characterization Of Electroless Nickel-Phosphorus-Boron Coatings From Acidic Bath, Tai-Xiang Jiang, Hui-Huang Wu

Journal of Electrochemistry

Acknowledgments The authors gratefully acknowledge Professor B.W.Mao for use of AFM facilities at her laboratory. We would also like to thank J.Tang for assistance with AFM measurements.

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu

Journal of Electrochemistry

The oxidation peak potentials (E_p) of alinine derivates and catechol in 0.1 mol/L KCl+15% alcohol solution were measured by cyclic voltammograms technique. The electrochemical oxidation condition was set according to the E_p. Three derivates of 4,5-disubstituted -1,2-benzoquinones were prepared via electrochemical oxidation-Michael addition reaction. The possible mechanism of electrochemical oxidation-Michael addition reaction is presented.

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui

Journal of Electrochemistry

A cathodic indirect electro-oxidation system was established for indirect electro-oxidize dimethyl sulfoxide to dimethyl sulfone with electro-eduction generated H₂O₂ catalyzed by the pertungstate/tungstate (WO₅^2-/WO₄^2-) redox mediator. Influences of current density, pH, temperature, and the current efficiencies etc. On the cathodic indirect electro-oxidation of dimethyl sulfone were investigated for determining optimum reaction conditions. The current efficiency reached more than 70%. Mother-liquid could be recycled to use without pollution.

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan

Journal of Electrochemistry

Performances of nickel electrodes when adding or without adding Cobalt in different forms were studied, the results were interpreted by cyclic voltammetry(CV) and electrochemical impedance spectroscope (EIS). It was demonstrated that the additions of Co, CoO, CoO+Co by mechanically mixing with Ni(OH)₂ all can improve the performance of nickel electrode to some extent, and when Co is added in the form of CoO the best performance can be obtained. This can be mainly attributed to the fact that three kinds of Co additives all improved the structure of nickel hydroxide and the ability of H⁺ in electrolyte transporting …

Sprayed And Thermally Evaporated Carbon Films As Anodes For Lithium Ion Batteries, Shu-Gao Zhang, M.Schleich Donald

Journal of Electrochemistry

Carbon films were made using spray-thermal evaporation from a kind of pyrolytic carbon powder. The films obtained with graphite structure were both potentio-statically and galvanostaically tested. Cycling patterns indicated a reduction peak on the first cycle corresponding to the formation of solid electrolyte interface, and the capacity values and x values were quite acceptable compared to theoretical ones when charging-discharging current density was suitable. Based on the experimental results, the obtained carbon films could be used as anode materials for relatively determining the electrochemical performances of cathode materials.

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai

Journal of Electrochemistry

An investigation has been made to obtain the glyoxalic acid by the electrochemical oxidation of glyoxal solution with hydrochloric acid under various experimental conditions.The cell used consists of a lead cathode, a DSA anode and a cation-exchange membrane of model CM001. The current efficiency and yield for glyoxalic acid generation were 80.0% and 91.1% respectively, under optimal operating conditions: velocity of electrolyte flow 1.4 m·s^-1 ,current density 450 A·m^-2, temperature 30～40 ℃, initial concentration of glyoxal and hydrochloric acid 9.1%～16.0%, 4%～6%, respectively.

An Eis Study On The Synergetic Filming Between Cathodic Protection And The Corrosion Inhibitor, Yong-Tao Zhao, Jian-Hua Wu, Jian-Hua Qian, Hui Yu

Journal of Electrochemistry

The electrochemical impedance spectroscope (EIS) of 907A steel in seawater was investigated to study the film formation and destruction. The corrosion protection mechanism of the synergy interaction between cathodic protection and YKI-5 corrosion inhibitor (a mixture of polyhydric alcohol phosphate ester, phosphate and polyphosphate) is discused. Typical EIS spectral changes were clearly observed during the film formation and destruction processes. EIS results indicated that the film seemed to formed a multi-layered structure which consist of an inner layer (this may be an inhibitor-metal complex layer) and many outer layers of calcareous deposits. The film possesses of good persistency under the …

Studies Of Abnormal Infrared Effects Of Nanometer Thin Films Of Transition Metals And Alloys In Acid Solutions, Shi-Gang Sun, Ming-Sen Zheng, Guo-Qiang Lu, Li-Rong Cai, Sheng-Pei Cehn, Xiao-Yin Xiao

Journal of Electrochemistry

The adsorption of CO on electrodes of nanometer thin films of transition metals (Pt, Pd, Rh, Ru) and alloys (PtPd, PtRu) prepared under cyclic voltammetric conditions has been studied by in situ FTIR spectroscopy. The abnormal infrared effects (AIREs) have been explored as a novel and general phenomenon. The AIREs consist mainly in the inversion of the direction of IR band and the significant enhancement of IR absorption by adsorbed CO species. It was revealed that the enhanced IR absoroption of adsorbed species in AIREs depends strongly on the nature of metal or alloy, and on the structure and the …

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

Synthesis and electrochemical investigations of {LiB[(SO₃)C₆H₃(O)(COO)]OC₆H₅} in EC/DMC or DMSO/PC mixtures are presented.

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu

Journal of Electrochemistry

To lower platinum loading in electrodes for polymer electrolyte membrane fuel cell, a new thin electrode fabrication technique (TEFT) was developed in this work. A series of low Pt loading electrodes with smooth and uniformed surface were fabricated by the TEFT. As a result, the maximum power density of the cell with platinum loading of 1 mg/cm² and Nafion 117 membrane as electrolyte was up to 0.3 W.cm^-2. Moreover, the effects of PTFE and Nafion content in cathodes on the performance of PEMFC with low Pt loading electrodes (1 mg Pt/cm²) were examined systematically.

Studies Of The Preparation Of Electrodes From Lead Carbonate For Lead-Acid Battery Ⅱ. The Preparation Of Paste Electrodes, Zhong-Xu Dai, Di-Hua Wang, Hao-Hao Ke, Jin-Yun Zou, Yun-Hong Zhou

Journal of Electrochemistry

The positive and negative pastes were prepared by mixing PbCO₃ and H₂SO₄ solution as well as relative additives, respectively. The effects of the various formation methods and the charge/discharge conditions on discharge capacity and active material utilization of both electrodes were examined. The results indicate that the performance of the positive electrode formed at 2.0 mA/cm² is better than that formed at higher current density under the same charge/discharge condition, the PAM utilization reaches 74.4 % under discharging at 2.0 mA/cm²; and the property of the negative electrode formed by unsymmetrical square wave …

Inhibition Of N,N'-O-Phenylen-Bis(3-Methoxysalicylidenimine) On Copper In Halide Solutions, Hou-Yi Ma, Shen-Hao Chen, Zhen-Lan Quan, Lin Niu, Shu-Lan Li

Journal of Electrochemistry

Inhibition of N,N'-o-phenylen-bis(3-methoxysalicylidenimine) (V-o-Ph-V) on corrosion and anodic disslution of copper in neutral NaCl and NaBr solutions was investigated in terms of potentiostatic steady-state polarization and A.C. impedance techniques. The inhibition mechanism of V-o-Ph-V to copper corrosion was interpreted in detail by comparing the electrochemical behaviors of copper in halide solutions with or without V-o-Ph-V. Besides, the inhibition effect of self-assembled V-o-Ph-V film on copper corrosion in NaCl was also studied.

Study On Preparation Of Coarse And Fine γ-Lialo2 Mixed Powder Used For Mcfc Matrix, Hua-Xin Lin, Bao-Lian Yi, Lian-Ying Kong, En-Jun Zhang, Li Zhou, Feng-Xia Wang

Journal of Electrochemistry

Coarse α-LiALO₂ powder was transferred completely to γ-LiAlO₂ at 900 ℃ for ten hours. Fine γ-LiALO₂ powder was prepared by “chloride” synthesis. MCFC matrix was fabricated by mixing the coarse and fine γ-LiALO₂ powder and by tape cast. The out'put voltage of the cell assembled with the matrix was 0.85 and 0.75 V respectively at 200 and 300 mA/cm ², and power density was about 250 mW/cm². The performance of the matrix fabricated with the mixed powder was obviously more advanced than that of the matrix fabricated with only coarse γ-LiALO₂ powder.

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan

Journal of Electrochemistry

By using a cost-effective wet process,dense yttria stabilized zirconia (YSZ) films on Ni-YSZ anode substrates have been prepared successfully. The YSZ film was characterized to be around 10 μm in thickness, sufficiently dense, uniform and crack free. A single solid oxide fuel cell fabricated from the supported YSZ film electrolyte on the anode substrate and a LSM cathode prepared on the YSZ film was tested. The power density reached to 0.1 W/cm² at 800 ℃, showing a reasonable performance. Further analysis on both electrodes shows that the anodic overpotential was much larger than IR drop (including YSZ resistance and …

Sol-Gel Ph Sensors And Sol-Gel Metal-Removing Sorbents, Dong Liu

Dissertations and Theses

Sol-gel silica is a porous glasslike material that can be prepared at room temperature. In this work, sol-gel method was employed to develop sol-gel sensors for pH measurement and sol-gel silica sorbents for removal of heavy metals.

Sol-gel pH sensors were prepared by entrapping pH indicators in porous solgel silica films. The feasibility of developing optical pH sensors with linear response over a wide pH range by using mixtures of multiple indicators was demonstrated. Theoretical criteria and experimental procedures for selecting indicators and determining optimum ratios of indicators were discussed. A linear response over 4.5 pH units was obtained for …

3-Hydroxykynurenine And 3-Hydroxyanthranilic Acid Generate Hydrogen Peroxide And Promote Α-Crystallin Cross Linking By Metal Ion Reduction, Lee E. Goldstein, Michael C. Leopold, Xudong Huang, Craig S. Atwood, Aleister J. Saunders, Mariana Hartshorn, James T. Lim, Et Al.

Chemistry Faculty Publications

The kynurenine pathway catabolite 3-hydroxykynurenine (3HK) and redox-active metals such as copper and iron are implicated in cataractogenesis. Here we investigate the reaction of kynurenine pathway catabolites with copper and iron, as well as interactions with the major lenticular structural proteins, the R-crystallins. The o-aminophenol kynurenine catabolites 3HK and 3-hydroxyanthranilic acid (3HAA) reduced Cu(II)>Fe(III) to Cu(I) and Fe(II), respectively, whereas quinolinic acid and the nonphenolic kynurenine catabolites kynurenine and anthranilic acid did not reduce either metal. Both 3HK and 3HAA generated superoxide and hydrogen peroxide in a copper-dependent manner. In addition, 3HK and 3HAA fostered copper-dependent R-crystallin cross-linking. 3HK- …

Structural And Electrical Characterization Of A Novel Mixed Conductor: Ceo2 - Sm2O3 - Zro2 Solid Solution, W. Huang, P. Shuk, M. Greenblatt, M. Croft, Fanglin Chen, M. Liu

Faculty Publications

solid solutions were synthesized for the first time by the hydrothermal method. The electrical properties of the solid solutions have been studied in air and under reducing conditions. Solid solutions with the fluorite structure were formed in all of the studied range of substitution after calcination at 1500°C. With increasing substitution up to 30 mol %, the electronic conductivity increases under a reducing atmosphere. The solid solution has good mixed electronic and ionic conductivity; the total conductivity is 0.42 S/cm at and 700°C with an estimated ionic conductivity of ca. .

Electrodeposition Of Copper On Polished Copper Electrode, Jia Tsung Ling

Student Works (2000-2009)

This project studies the surface morphology of the copper deposit from three different bath solutions on polished copper (3.1 mm in diameter) electrode by using Scanning Electron Microscopy. The behaviour of glycine as an additive in a bath solution containing 0.3 M of copper (II) sulphate and 2.2 M of sulphuric acid was studied by using cyclic voltammetry. In this project, glycine did not involved directly in the reaction of CU²⁺/CU couple but increased the potential and current density of the plating process. However, glycine has the properties for inhibiting the deposition of copper onto the copper disc. Moreover, block …

Study On Electrochemical Reduction Properties Of Nitrobenzene, Chu-Na Ma, Wen-Kui Zhang, Hui Huang, Yong-Ping Gan

Journal of Electrochemistry

The electrochemical reduction characteristics of nitrobenzene was extensively investigated by using the techniques such as quasi-steady-state polarization, cyclic voltammetry, fast linear potential sweep method and chronoamperometry in this paper. The electroanalytic properties of Cu, Cu-Hg and Cu-Ni electrodes were evaluated. Based on the study of the transient steping behaviour of nitrobenzene to PAP, the reduction mechanism was discussed. The results showed that the transition steps existed on the electrochemical reduction of nitrobenzene in acidic solution, the reactant is also absorbed on electrodes surface. The control step in the reduction of nitrobenzene was ascribed to the diffusion of nitrobenzene and its …

A Novel Reaction Region Moving Electrode System For Electrochemical Power Sources, Jin-Kua You, Que Tu, Zheng-Jian Wang, Jie Sun, Zu-Geng Lin

Journal of Electrochemistry

In most of practical rechargeable batteries, charging/discharging process is always concerned with phase-transformation in the solid state. Due to the irreversibility of the phase-transformation, the cyclic performance of the rechargeable batteries are limited. In this paper, a novel reaction-region moving counter electrode system is constructed in our laboratory. The electrode system is operated at room temperature and cycled in solid-liquid phase during charging/discharging processes. With this electrode, the metal-complexes are firstly deposited (i.e. charging process) on the nearest working electrode and gradually extended to those another working electrodes several centimeters away from the counter electrode. The deposite is dissolved again …

High Performance Proton Exchange Membrane Fuel Cells, Jing-Rong Yu, Bao-Lian Yi, Ming Han, Xiao-Liang Cheng, Zhi-Gang Shao, Jing-Xin Zhang

Journal of Electrochemistry

Proton-exchange membrane fuel cells(PEMFC) using a perfluorosulfonic acid proton exchange membrane as an electrolyte can simplify water and electrolyte management. In this paper, the effects of thickness of PEM on the performance of PEMFC were studied. The Nafion-112 PEM and low platinum loading E-TEK electrode yielded very high power density, of the order of 0.95 W/cm². The energy-conversion efficiency, the degree of platinum utilization and stability for PEMFC using Nafion 112 and E-TEK electrode were also investigated.

Electro-Oxidation Of Phenol On Sno2/Ti Electrodes Prepared By Thermal Oxidation, Qing-Song Zhang, Hui-Huang Wu

Journal of Electrochemistry

A SnO₂/Ti electrode prepared by thermal oxidation was used as the anode for galvanostatic electrolysis in acidic solution containing phenol, the time-dependances of phenol concentration, chemical oxygen demand in solution(COD) and instantaneous current efficiency were determined during electrolysis. The results show that with the SnO₂/Ti anode instead of Pt, the COD significantly decreases at the same charge passage, and average current efficiency of oxidation increases by three times. The mechanism for phenol oxidation at two electrodes was discussed.

Investigation Of Sodium Hypophosphite Anodic Oxidizing Behavior In The Process Of Acid Electroless Nickel Deposition, Mei-Yuan Wang, Ya-Fei Kuang, Yan Xu

Journal of Electrochemistry

The anodic oxidizing behavior of sodium hypophosphite in the process of electroless nickle deposition (pH=5.5) was investigated with the linear potential sweep method and alternating current impedance. The results indicated that, the oxidation of NaH₂PO₂ was a complicated electrochemical process and affected by the concentration of NaH₂PO₂, the temperature of the bath, the sweep rate and the existence of nickel ion. The NaH₂PO₂ electrooxidation reaction was very likely preceded by heterogeneous interface transformation process, which might be the control step of the whole anodic process.

Studies Of The Electrode Preparation Of Electrode From Lead Carbonate For Lead Acid Batteryⅰ. The Activation Of The Pme, Zhong-Xu Dai, Di-Hua Wang, Jun-Wei Jiang, Yun-Hong Zhou, Jin-Yun Zou

Journal of Electrochemistry

Lead carbonate which was an intermediate product in lead hydrometallurgy without pollution of lead vapor and sulfur dioxide was selected as electrode material of lead-acid batteries. In the present work, the performances of PbO₂/PbSO₄ or PbSO₄/Pb electrode transformed from PbCO₃ have been investigated by powder microelectrode technique combined with cyclic voltammetry. The results show that the CV characteristics of either negative or positive electrode prepared from PbCO₃ is as good as that of both electrodes made from lead oxide produced by mill machine,when a powder microelectrode with PbCO₃ transformed into PbSO 4 …

The Studies Of The (Photo) Electrochemical Character On The Electrodeposited Silver Indium Selenium Thin Films, Shao-Ai Xie, Xun-Nan Deng, You-Jin Kua

Journal of Electrochemistry

A photoelectrochemical cell (PEC) is constructed, using an AgInSe₂ film photoanode made from electrodeposition and a platinium electrode in aqueous polyiodide or polysufide electrolyte. The V_oc and I_sc of PEC have been tested and measured, and the effect of chemical decoration on the photoanodes also studied.

Studies On Methods Of Fuel Cells Electrodes Preparation, Jun Gu, Sheng Sui, Guang-Qiang Li, Zhitong Sui

Journal of Electrochemistry

In fuel cells, the structure of electrodes is an important factor which effect the cell performance. To improve the structure and the performance of electrodes, a new method of providing fuel cell electrodes is proposed in this paper. PTFE (polytetrafluoroethylene) and ethyne black was ground for about half an hour in a high-speed grinder, then the catalyst was added into the grinder and milled for an hour. This milled catalyst was transferred into a mixer followed by the addition of surface-active agent. After a suspension was formed, it was filtered under vacuum condition.Then a thin uniform filter-cake of the catalyst …

Surface Enhanced Raman Spectroscopic Study Of Scn- Adsorbed At The Copper And Gold Nanowire Arrays, Jian-Lin Yao, Guo-Ping Pan, Kuan-Hong Xue, Yong Xie, Jing Tang, Bin Ren, Dong-Mei Sun, Bing-Wei Mao, Zhong-Qun Tian

Journal of Electrochemistry

Two-dimensional arrays of Cu and Au nanowires have been fabricated by template synthesis method, using the anodic aluminum oxidation films as the template. The morphology of the nanowire array was monitored by atomic force microscope (AFM) in the dissolution processes of the alumina film. Based on the probe molecule strategy, the spectral feature of SCN^- adsorbed at the Cu and Au nanowires with different diameters has been investigated by surface enhanced Raman spectroscopy (SERS). The results reveal that the intensity of the SERS bands depends on the length of the exposed nanowires. The C≡N stretching vibration frequency (ν_{CN …}

Aes Multi-Layer Structural Analysis Of Si Based Anodic Porous Alumina Films And Studies On Its Formation Mechanism, Jun-Hui Wu, Jian-Ping Zou, Qing Zhu, Xi-Mao Bao

Journal of Electrochemistry

400 nm aluminum films were deposited onto a p-type, 0.5 Ω·cm,〈100〉oriented silicon wafers using electron beam evaporation technique. Then, the wafers was immersed in 15 wt% H₂SO₄ for porous-type over-anodization under a constant voltage of DC 60V. During the anodization,the temperature of the electrolyte was maintained at 0 ℃. The obtained samples were investigated by means of transmission electron microscopy, scanning electron microscopy, and AES depth profile for multi-layer structural information. In addition, the basic anodic formation mechanism of the Si-based aluminum films was brielfly discussed.

Photoelectrochemical Studies On The Tio2 Nanostructured Porous Film Sensitized By Cyanine Dye, Li Zhang, Mai-Zhi Yang, Xue-Bin Qiao, Yan-Zhong Hao, En-Qing Gao, Sheng-Min Cai

Journal of Electrochemistry

The photoelectrochemical behaviors of the TiO₂ nanostructured porous film sensitized by cyanine dye were investigated in this paper. The results showed that the excitaed state level matched the conduction band edge of TiO₂ nanoparticle. Therefore the sensitization of the dye can increase the photocurrent intensity of the TiO₂ nanostructured electrode obviously and results in a red-shift of optical absorption from the ultra-violet region to the visible. As a result, the light-to-electricity conversion efficiency was improved evidently, the maximum value of IPCE has reached 12.1%.

The Preparation Of Flexible Polymeric Anode And The Measurement Of Its Protective Ability For Cathodic Protection, Ai-Ling Du, He-Ming Zhang, Ming-Zong Zhang, Shi-De Ma

Journal of Electrochemistry

The flexible electrode, whose shape can be changed freely, was made of ethenyl copolymer and conductive component and proper amount of additive for cathodic protection. The resistance of electrode was measured.In low concentration of H₂SO₄, the flexible electrode can be used as auxiliary anode to protect the carbon steel. The protection ability of the flexible auxiliary anode was measured too.