Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2461 - 2490 of 3581

Full-Text Articles in Chemistry

Synthesis And Characterization Of Some Rhenium Complexes, Joseph Brian Scott Aug 2009

Synthesis And Characterization Of Some Rhenium Complexes, Joseph Brian Scott

Masters Theses & Specialist Projects

Plastics or polymers are thought to behave oppositely from metals. Ideally, polymers behave as insulators while metals conduct electricity. Shirakawa and coworkers discovered conductive polymers in 1977.1 These conductor polymers have been extensively studied, discovering that charge transfer oxidative doping of polyacteylene could increase its conductivity by 12 orders of magnitude. Polyacetylene, although showing promise as an organic conductor, because it is highly air-sensitive and oxidizes when exposed to molecular oxygen, therefore making this an unattractive use for commercial products. Attention has been focused on heterocylic aromatic polymers such as polythiophene and polypyrrole, in efforts to produce conductive polymers that …

Go to article

The Use Of Fourier Transform (Ft) Surface-Enhanced Raman Scattering For Biochemical Analysis, Robert Butler Jeffers Jul 2009

The Use Of Fourier Transform (Ft) Surface-Enhanced Raman Scattering For Biochemical Analysis, Robert Butler Jeffers

Chemistry & Biochemistry Theses & Dissertations

Surface-enhanced Raman scattering (SERS) is a powerful spectroscopic technique that has created exciting opportunities in the field of bioanalytical chemistry, where it combines ultrasensitive detection of biologically relevant molecules with vibrational spectroscopy. Due to the difficulties in preparing reproducible SERS active substrates, SERS has been mainly used as a qualitative tool. In order for SERS to be utilized as a viable tool for quantitative analysis, simple, facile SERS substrates which generate clean, highly reproducible signals must be developed. This dissertation deals with the evaluation of three different methods of SERS that led to the development of a novel substrate for …

Go to article

Effect Of Liquid Dispersion On Corrosion Behavior Of Metals In Gas/Liquid/Solid Multiphase Corrosion Systems, Jing Jiang, Jia Wang May 2009

Effect Of Liquid Dispersion On Corrosion Behavior Of Metals In Gas/Liquid/Solid Multiphase Corrosion Systems, Jing Jiang, Jia Wang

Journal of Electrochemistry

Liquid dispersion,described by the parameters of gas/liquid/solid three-phase boundary(TPB) zone of dispersed liquid on a metal surface,is an important property of liquid state influencing corrosion behavior of metals in gas/liquid/solid multiphase corrosion systems.In our paper,the characterisation of cathodic oxygen reduction process in TPB zone was discussed,and a model describing the cathodic process of TPB zone was developed.On this basis,the relationship between the cathodic limiting current and the TPB parameters was studied,and the simulation results were in good agreement with the experimental data.The role of liquid dispersion in atmospheric and sandy soil corrosion systems was also simulated.

Go to article

Electrodeposition Of Al On Magnesium Alloy In Ionic Liquid, Wen-Ta Tsai, Shu-You Chen, Mu-Huan Zhuang, Jeng-Kuei Chang, Yi-Wen Sun May 2009

Electrodeposition Of Al On Magnesium Alloy In Ionic Liquid, Wen-Ta Tsai, Shu-You Chen, Mu-Huan Zhuang, Jeng-Kuei Chang, Yi-Wen Sun

Journal of Electrochemistry

Electrodeposition of a metallic aluminum on a magnesium alloy in acidic aluminum chloride-1-ethyl-3-methylimidazolium chloride ionic liquids(AlCl3-EMIC) was investigated.The effects of current density and AlCl3 content in the ionic liquid on the electrodeposition behavior were studied.The results showed that aluminum could be successfully electrodeposited on the AZ91D substrate.At-0.2 V,the ionic liquid containing 60 m/o AlCl3 was optimum for Al electrodeposition.The current efficiency was higher if electrodeposition was performed at a lower applied current density.The existence of Al coating could caused a substantial increase in open circuit potential,reducing the susceptibility of Mg alloy to corrosion.The results of electrochemical …

Go to article

Electrochemical Characteristics Of Vitaminb6 At Polybromocresol Green Modified Electrode, Jun Yao, Jiang-Yuan Li, Yang Luo May 2009

Electrochemical Characteristics Of Vitaminb6 At Polybromocresol Green Modified Electrode, Jun Yao, Jiang-Yuan Li, Yang Luo

Journal of Electrochemistry

Electrochemical characteristics of VB6 were investigated at PBG modified electrode by Cyclic voltammetry and linear sweep voltammetry.The VB6 produced an irreversible oxidation peak at 0.978 V(Vs.SCE) in HAc-NaAc(pH=4.0) buffer solution over the potential range of 0.7 to 1.2 V.The electron number,the proton number,the transfer coefficient were determined to be 1,1 and 0.37,respectively.The oxidation peak currents of VB6 versus its concentration showed a linear relationship in the concentration range of 1×10-3~2×10-5mol/L with the correlation coefficient of 0.9967 and the detection limit of 2×10-6mol/L.The recovery was 100.06%.

Go to article

Corrosion Performance Of Epoxy Coatings By Chemical Modification With Silanes, Liang Liu, Wei-Gang Ji, Ji-Ming Hu, Jian-Qing Zhang, Chu-Nan Cao May 2009

Corrosion Performance Of Epoxy Coatings By Chemical Modification With Silanes, Liang Liu, Wei-Gang Ji, Ji-Ming Hu, Jian-Qing Zhang, Chu-Nan Cao

Journal of Electrochemistry

The improvement of corrosion performance of epoxy coatings by modification with "active" and "non-active" silanes is presented."Active" silanes are defined as ones having functional groups that can react with the epoxy groups in the epoxy resin,usually amino-silanes."Non-active" silanes are defined as ones not reacting with the epoxy groups,but can react with the hydroxyl groups in the epoxy backbone by the condensation reactions under the catalysis of organic tin compounds.The FTIR results showed that both the "active" and "non-active" silanes had been successfully grafted onto the epoxy resin.Electrochemical impedance spectroscopy(EIS) and accelerated corrosion test(Machu test) showed that the corrosion performance of …

Go to article

Complex Of 3-Amino-1,2,4-Triazole And Na2Wo4 As An Inhibitor For Brass Corrosion, Qun-Jie Xu, Chun-Xiang Li, Yu-Hong Ni, Guo-Ding Zhou May 2009

Complex Of 3-Amino-1,2,4-Triazole And Na2Wo4 As An Inhibitor For Brass Corrosion, Qun-Jie Xu, Chun-Xiang Li, Yu-Hong Ni, Guo-Ding Zhou

Journal of Electrochemistry

AC impedance and polarization methods were used to study the inhibition effect of ATA and the complex of ATA and Na2WO4 for brass corrosion in 3% NaCl solution.The results indicated that ATA had inhibition effect for brass corrosion.ATA showed the best inhibition effect for brass corrosion at the ATA concentration of 7.5 mg·L-1,and the inhibition efficiency was 87.46%.At the ATA concentration of 7.5 mg·L-1 and at the Na2WO4 concentration of 0.15 mg·L-1,the complex showed optimum inhibition effect for brass corrosion,and also showed synergistic effect and the inhibition efficiency reached …

Go to article

Electrode Of Metallic Oxides Coated Titanium With Interlayer, Yi Tang, Li-Kun Xu, Yong-Lei Xin, Jun-Tao Wang, Ping Long May 2009

Electrode Of Metallic Oxides Coated Titanium With Interlayer, Yi Tang, Li-Kun Xu, Yong-Lei Xin, Jun-Tao Wang, Ping Long

Journal of Electrochemistry

Various Ti/IrRuSn,Ti/IrTa/IrRuSn and Ti/IrTaSn/IrRuSn oxide electrodes were prepared by sol-gel method.The surface morphology and microstructure were analysed with FESEM and XRD.The electrochemical activity and stability were investigated using electrochemical technologies including chlorine and oxygen evolving potential measurements,cyclic voltammetry,accelerated life test,and alternative electrolysis.The results indicate that the electrodes with interlayers present more cracks on the surface and a little bigger average grain size,with particles of different shapes precipitated in the cracks.The electroactive sites are increased and the selectivity for the chlorine evolving reaction is enhanced,but the current efficiency for the chlorine production is somewhat lowered by the addition of different interlayers.The …

Go to article

The Accelerated Test Of Simulated Atmospheric Corrosion And The Rust Evolution Of Low Carbon Steel, Jun-Hua Dong, Wei Ke May 2009

The Accelerated Test Of Simulated Atmospheric Corrosion And The Rust Evolution Of Low Carbon Steel, Jun-Hua Dong, Wei Ke

Journal of Electrochemistry

It has been set up an accelerated method of simulating to atmospheric corrosion by using wet/dry alternate test.The rust evolution rule of mass change vs time(in logarithmic coordinate) of low carbon steel under this test shows two linear sections with different slopes,in which the rust evolution transition in weight change corresponds to the compactness transition and crystallization transition during the rust layer growth.It has found that the rust evolution rule of low carbon steel in Wanning exposure site correlates to the rust evolution rule obtained by simulating the coastal atmospheric corrosion test,and the rust evolution rule of low carbon steel …

Go to article

Investigation Of Electrochemical Noise In The Crevice Corrosion Of Q235 Carbon Cteel, Qian Hu, Yu-Bing Qiu, Xing-Peng Guo May 2009

Investigation Of Electrochemical Noise In The Crevice Corrosion Of Q235 Carbon Cteel, Qian Hu, Yu-Bing Qiu, Xing-Peng Guo

Journal of Electrochemistry

The crevice corrosion behavior of Q235 carbon steels in a NaHCO3+NaCl solution was investigated by electrochemical noise(EN) and electrochemical impedance spectroscopy(EIS).Three stages of crevice corrosion including the induction,the rapid transform and the stable development could be clearly distinguished.The characteristics of the electrochemical noise and the noise resistance Rn showed remarkable differences at each stage.The electrode area ratio(r) of outside to inside the crevice had a significant influence in the development of crevice corrosion.The time of the induction stage increased with increasing r.However,under the stable development stage of the crevice corrosion,the surface outside the crevice was at an active …

Go to article

Effect Of Naphthalene Water Reducer On Corrosion Behavior Of Reinforcing Steel In Concrete, Yu-Ming Tang, Jie Zhang, Yu Zuo May 2009

Effect Of Naphthalene Water Reducer On Corrosion Behavior Of Reinforcing Steel In Concrete, Yu-Ming Tang, Jie Zhang, Yu Zuo

Journal of Electrochemistry

The influence of naphthalene water reducer on corrosion behavior of reinforcing steel in concrete was studied by the methods of corrosion potential measurement,linear polarization and EIS test.The values of concrete resistance(Rc) and polarization resistance(Rp) of the samples with naphthalene water reducer were higher than those without naphthalene water reducer,especially in the concrete with 0.2 percent naphthalene water reducer.A suitable amount of water reducer can improve the pore structures of concrete,increase the concrete compactness and impermeability,and decrease corrosion rate of rebars in concrete.

Go to article

Effect Of Electrochemical Property Of Uns J91450 Stainless Steel On Stress Corrosion Cracking In Hydrogen Sulfide Solutions, Zhi-Yong Liu, Chao-Fang Dong, Xiao-Gang Li, Li-Xian Wang May 2009

Effect Of Electrochemical Property Of Uns J91450 Stainless Steel On Stress Corrosion Cracking In Hydrogen Sulfide Solutions, Zhi-Yong Liu, Chao-Fang Dong, Xiao-Gang Li, Li-Xian Wang

Journal of Electrochemistry

Effect of electrochemical behaviours on stress corrosion cracking(SCC) of UNS J91450 stainless steel in hydrogen sulfide environment was investigated using slow-strain-rate test(SSRT) and electchemial techniques.Results show that UNS J91540 stainless steel was susceptible to SCC in varying H2S solutions,and the SCC susceptibility reduced with the increase of pH value.The electrochemical property plays an important role in the SCC occurrence,as a combined effect of hydrogen embritlement and anodic dissolution at SCC cracktip at open circuit potential.In the solution with a lower pH the hydrogen revolution was intensive and the cracktip anodic dissolution was weaker,however,in the higher pH solution the …

Go to article

Developments Of Scanning Electrochemical Probes And Their Applications In Studying Of Localized Corrosions, Chang-Jian Lin, Yan Li, Bin Lin, Rong-Gang Hu, Min Zhang, Xiang-Dong Zhuo, Rong-Gui Du May 2009

Developments Of Scanning Electrochemical Probes And Their Applications In Studying Of Localized Corrosions, Chang-Jian Lin, Yan Li, Bin Lin, Rong-Gang Hu, Min Zhang, Xiang-Dong Zhuo, Rong-Gui Du

Journal of Electrochemistry

The electrochemical inhomogeneities always exist at the interface of metal/solution,and play an important and often controlling role in localized corrosion of metals in a given environment.It is necessary to develop in situ imaging techniques for further studying the electrochemical and environmental inhomogeneities at the interface of metal/solution for the localized corrosion system.In this paper,various techniques with spatial resolution,such as scanning micro reference electrode(SMET),scanning electrochemical microscope(SECM),atomic force microscope(AFM),and scanning Kelvin probe(SKP),and their applications in corrosion studies were briefly reviewed.The chemical probes and array electrode have been developed.It was concentrated to describe our newly developed techniques of the scanning electrochemical probes,including SMET …

Go to article

Preparation And Electrochemical Properties Of Layered Manganese Oxide(Li-Birnessite Type), Xing-Kang Huang, Hai-Tao Chang, Jian-Long Gan, Qing-Shun Zhang, Hong-Jun Yue, Dong-Ping Lv, Yong Yang May 2009

Preparation And Electrochemical Properties Of Layered Manganese Oxide(Li-Birnessite Type), Xing-Kang Huang, Hai-Tao Chang, Jian-Long Gan, Qing-Shun Zhang, Hong-Jun Yue, Dong-Ping Lv, Yong Yang

Journal of Electrochemistry

Layered Li-birnessite was prepared by means of oxidizing Mn2+ with O2 gas in alkaline media.The as-prepared sample was characterized by scanning electron microscopy(SEM), X-ray diffraction(XRD), BET and thermogravimetric/diffenential thermal analysis(TG/DTA) techniques. The electrochemical properties of the material were also investigated. The results show that such a Li-birnessite consists of well-crystallized spherical particles with an interlayer distance of 0.70 nm. The Li-birnessite delivered a high discharge capacity of 203 mAh/g at a rate of 0.2 C(40 mA/g), and had good rate capability as well.

Go to article

Electrochemical Behavior Of Mg-Li Electrodes In Nacl Solution, Lin Wu, Yan-Zhuo Lv, Xue Cao, Gui-Ling Wang, Dian-Xue Cao May 2009

Electrochemical Behavior Of Mg-Li Electrodes In Nacl Solution, Lin Wu, Yan-Zhuo Lv, Xue Cao, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

The Mg-Li electrodes containing 8.5% and 14% Li were prepared using an induction melting method. Their electrochemical behavior in NaCl solution was investigated by means of potentiodynamic polarization, potentiostatic oxidation,electrochemical impedance technique and mass-loss measurements. The morphology of the electrodes after discharge was examined using scanning electron microscopy. The Mg-14Li electrode showed more negative open circuit potential and higher discharge current density than Mg-8.5Li electrode. The oxidation products of Mg-14Li loosely attached on the electrode surface and peeled off easily. The Mg-8.5Li exhibited higher utilization efficiency. Both electrodes gave higher utilization efficiencies when discharged at lower anodic potential.

Go to article

Electrochemical Performance Of The Exfoliated Graphite Containing Sulfur Cathode Material For Lithium Sulfur Battery, Ke-Guo Yuan, Wei-Kun Wang, Zhong-Bao Yu, An-Bang Wang May 2009

Electrochemical Performance Of The Exfoliated Graphite Containing Sulfur Cathode Material For Lithium Sulfur Battery, Ke-Guo Yuan, Wei-Kun Wang, Zhong-Bao Yu, An-Bang Wang

Journal of Electrochemistry

The exfoliated graphite containing sulfur cathode material was prepared by the high temperature sulfur gas diffusion adsorption method.This cathode material could obtain an initial discharge specific capacity 972 mAh·g-1,capacity retention ratio 78% and cycling efficiency above 80%,respectively.The exfoliated graphite containing sulfur cathode could decrease the reaction interphase charge transfer impedance,and restrain the sulfur or polysulfide shuttle phenomenon during the charge-discharge process through improving the diffusion impedance.

Go to article

Effects Of Kscn On Kinetic Characters Of The Positive Couple And Performance For Vanadium Redox Flow Battery, Jian-Guo Liu, Dong Shi, Yue Men, Chuan-Wei Yan May 2009

Effects Of Kscn On Kinetic Characters Of The Positive Couple And Performance For Vanadium Redox Flow Battery, Jian-Guo Liu, Dong Shi, Yue Men, Chuan-Wei Yan

Journal of Electrochemistry

In order to improve the reaction activity of VO2+/VO2+ and the battery performance of Vanadium redox flow battery,different concentration of potassium sulfocyanates KSCN were added into 0.1mol/L VOSO4/ H2SO4 solution,and the kinetic characters of electrochemical reaction of VO2+/VO2+ was studied by CV and EIS.The results showed that the addition of KSCN could improve the oxidative peak current value of positive couple VO2+/VO2+ reaction,but had little influence in the reductive peak.The addition of KSCN decreased the impedance at 1.0 V.And the value of standard rate constant k0 …

Go to article

Effect Of Impurity Cu(2+) On Oxygen Electrode In Pemfc, Xiao Jie, Jun-Bo Hou, Zhi-Gang Shao, Bao-Lian Yi May 2009

Effect Of Impurity Cu(2+) On Oxygen Electrode In Pemfc, Xiao Jie, Jun-Bo Hou, Zhi-Gang Shao, Bao-Lian Yi

Journal of Electrochemistry

Rotating disk electrode was adopted in this paper to simulate the cathode in PEMFC.In the Cu2+ electrolyte,the influence of impurity Cu2+ on Carbon-Supported Pt Catalysts was investigated by using electrochemical measurements such as chronocoulometry,cyclic voltammetry and linear sweep.Experimental results showed that,after constant voltage at 0.49 V,the ECA of Pt/C decreased dramatically,it's perhaps under potential deposition of Cu might occur on the substrate.Meanwhile the change of ORR Tafel scope reaction is very large.It might be because oxygen adsorption sites are occupied by Cu atoms after they under potential deposit on surface of Pt/C catalyst,and the adsorption of oxygen on …

Go to article

Electro-Oxidation Of Methanol On Fe-Doped Pt-Zro2/C Catalyst, Mao-Cai Lin, Dong-Dong Liu, Qing-Chun Yu, Ming-Ruo Hu, Heng-Yong Tu May 2009

Electro-Oxidation Of Methanol On Fe-Doped Pt-Zro2/C Catalyst, Mao-Cai Lin, Dong-Dong Liu, Qing-Chun Yu, Ming-Ruo Hu, Heng-Yong Tu

Journal of Electrochemistry

The Fe-doped ZrO2 powders were prepared by so-gel method.After that,Pt-Zr1-xFexO2/C catalysts were made by reducing platinum salts with ethylene glycol.The physical property of the catalyst was characterized by XRD and TEM.It was found that the distribution of the catalyst was narrow,the particle sizes of Pt and ZrO2 particles were 2~4 nm and 3~7 nm,respectively.The Cyclic Voltammetry and Chronoamperometry testing indicated that the electro-catalytic activity for methanol electro-oxidation on Pt-ZrO2/C catalyst increased when ZrO2 was doped with Fe.And Pt-Zr0.95Fe0.05O2/C catalyst showed the highest activity …

Go to article

Investigation On Electrogenerated Active Chlorine From Diluted Nacl Solutions At Ti/Pt Anode, Hao Shen, Jin-Hong Fan, Lu-Ming Ma May 2009

Investigation On Electrogenerated Active Chlorine From Diluted Nacl Solutions At Ti/Pt Anode, Hao Shen, Jin-Hong Fan, Lu-Ming Ma

Journal of Electrochemistry

Electrogeneration of active chlorine from diluted NaCl solutions was investigated in an undivided cell with Ti/Pt anode and Ti plate cathode.The effects of electrolysis time,current density(i),chloride concentration and pH value on the electrogeneration of active chlorine and current efficiency(CE) were analyzed.Meanwhile,the changing trends of the electrolyte's conductivity(TSD) and pH value in the electrolysis process were discussed.The results showed that the concentration of active chlorine increased with electrolysis time,but the trend became slow.During this process,the current efficiency reduced steadily.When i was 4.93～7.39 mA/cm2,the concentration of active chlorine increased with the increase of i,but no longer increased when the i …

Go to article

Design, Synthesis, And Film Formation Of Fluorine Containing Colloidal Dispersions, Anuradha Misra May 2009

Design, Synthesis, And Film Formation Of Fluorine Containing Colloidal Dispersions, Anuradha Misra

Dissertations

Fluoropolymers (FPs) have been subject of interest for many years, however due to extreme synthetic and processing conditions their applications have been limited. This dissertation focuses on design and synthesis of fluorine containing colloidal dispersions to advance limited knowledge and to gain further understanding of fluorine containing colloidal dispersions. Fluoroacrylates and fluoro methacrylates consisting of varying chain length of perfluoroalkyl side chain were copolymerized with methylmethacrylate (MMA) and n-butylacrylate (n-BA) under aqueous environment utilizing phospholipids (PLs) as dispersing agent. Morphologies of colloids, coalescence, and film formation processes after water evaporation was investigated using various microscopic probes such as transmission electron …

Go to article

Influence Of Functional Components On The Film Formation Of Colloidal Dispersions, Kevin Lee Rhudy May 2009

Influence Of Functional Components On The Film Formation Of Colloidal Dispersions, Kevin Lee Rhudy

Dissertations

A number of colloidal dispersions were synthesized to advance knowledge and gain understanding regarding interactions between individual components and for elucidation of complex processes governing their film formation. These studies show that for methyl methacrylate/n-butyl acrylate (MMA/nBA) colloidal dispersions, the presence of functional components significantly affects film formation. The incorporation of polyvinyl alcohol (PVOH) into pMMA/nBA colloidal dispersions creates competing environments between the copolymer particle surfaces, aqueous phases, and dispersing agents which results in migration with self-induced stratification occuring during coalescence. pMMA/nBA/PVOH films stratify to form sodium dodecyl sulfate (SDS) rich film-air (F-A) interfaces, and the -SO3" moieties exhibit preferential …

Go to article

Magnetic And Dielectric Properties Of Sulfonated (S) Poly[(Styrene)-(Ethylene-Co-Butylene)-(Styrene)] (Sebs) Block Copolymer/Magnetic Metal Oxide Nanocomposites Synthesized Via An In-Situ Precipitation Method, Sateesh Kumar Peddini May 2009

Magnetic And Dielectric Properties Of Sulfonated (S) Poly[(Styrene)-(Ethylene-Co-Butylene)-(Styrene)] (Sebs) Block Copolymer/Magnetic Metal Oxide Nanocomposites Synthesized Via An In-Situ Precipitation Method, Sateesh Kumar Peddini

Dissertations

Block copolymer/magnetic metal oxide nanocomposites were synthesized by growing metal oxide nanoparticles (cobalt ferrite, CoFe204 and iron oxide, a-Fe203) in sulfonated (s) poly (styrene) (PS) block domains of sulfonated poly [(styrene)-(ethyleneco- butylene)-(styrene)] (SEBS) BCP preformed films via an in-situ precipitation method by dissolving the salts of respective metal chloride (s) in a suitable solvent that selectively swells the sPS regions. Inorganic uptake was determined using thermogravimetric analysis (TGA), and it was observed that none of the samples incorporated more than 5 wt % of the inorganic component. Dynamical mechanical analysis was used to observe the changes in the glass transition …

Go to article

Evaluation Of Low-Temperature Fluoride Routes To Synthesize Actinide Nitrides And Oxide Solid Solutions, Gunanda Waduge Chinthaka Silva May 2009

Evaluation Of Low-Temperature Fluoride Routes To Synthesize Actinide Nitrides And Oxide Solid Solutions, Gunanda Waduge Chinthaka Silva

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actinide mononitrides have been considered as a possible nuclear fuel for the Generation-IV nuclear reactor systems. In the process of evaluating these actinide mononitrides as nuclear fuel, it is important to study different chemical and physical characteristics of these compounds. Synthesis of the materials is thus important. Carbothermic reduction is one of the techniques that have been used to synthesize actinide mononitrides. In this method, a mixture of actinide oxide such as UO 2 and excess carbon is heat treated at temperatures greater than 1700 °C under a nitrogen atmosphere. The technique is however not promising in synthesizing the actinide …

Go to article

The Synthesis And Systematic Evaluation Of Modified Polymeric Foams And Electrically Conductive Polyimide/Carbon/Metal Films, John Macharia Kinyanjui May 2009

The Synthesis And Systematic Evaluation Of Modified Polymeric Foams And Electrically Conductive Polyimide/Carbon/Metal Films, John Macharia Kinyanjui

UNLV Theses, Dissertations, Professional Papers, and Capstones

Thermally processed PU foams are examined as a function of processing temperatures (25, 45, 65, and 85°C) at the side, middle, and center of a simple cylindrical mold. The PU foams show both chemical and morphological differences as a function of the processing temperature and radial position within the mold. Thermal degradation of uretoneimine structures, the emergence of carbodiimide structures, and extent of reaction of isocyanate groups are measured using photoacoustic FTIR spectroscopy. Chemical gradients and morphology differences between the side, middle, and center of the molded foam are observed for all processing temperatures. The data indicate that thermal activation …

Go to article

Tobacco Mosaic Virus Templated Synthesis Of One Dimensional Inorganic–Polymer Hybrid Fibres, Jianhua Rong, Fiona Oberbeck, Xinnan Wang, Xiaodong Li, Jerry Oxsher, Zhongwei Niu, Qian Wang Mar 2009

Tobacco Mosaic Virus Templated Synthesis Of One Dimensional Inorganic–Polymer Hybrid Fibres, Jianhua Rong, Fiona Oberbeck, Xinnan Wang, Xiaodong Li, Jerry Oxsher, Zhongwei Niu, Qian Wang

Faculty Publications

Inorganic–polymer hybrid nanofibres were prepared by using a rod-like tobacco mosaic virus (TMV) as a template. With tetraethylorthosilicate (TEOS) as a precursor, long silica-coated TMVfibres were formed via a head-to-tail assembly, which showed a substantial increase of the elastic modulus. Furthermore, homogenous titania–TMV hybrid fibres could be prepared using polyaniline-coated TMV fibres as a template, which were used to form a composite film that was able to sense liquefied petroleum gases.

Go to article

Advanced Radiometry For High Discrimination Explosive Fireball Discrimination, Steven E. Slagle Mar 2009

Advanced Radiometry For High Discrimination Explosive Fireball Discrimination, Steven E. Slagle

Theses and Dissertations

The high explosive fireball phenomenological model for the mid wave infrared spectrum, developed by AFIT, performs classification from spectral signatures was modified to use radiometric intensities. Five bands were sequentially fit to derive the five physical fit parameters describing the fireball's temperature, size, soot absorption coefficient within 16% and emissions from the H2O and CO2 concentrations within 333% of the spectral model. This was improved by changing the model's band sizes, center, and fitting methods where all five fit parameters were matched to within 17% of spectral model. This demonstrated that a combination of radiometric intensities could …

Go to article

Investigation Of Electrical And Optical Properties Of Bulk Iii-V Ternary Semiconductors, Travis C. Gomez Mar 2009

Investigation Of Electrical And Optical Properties Of Bulk Iii-V Ternary Semiconductors, Travis C. Gomez

Theses and Dissertations

Bulk grown III-V ternary semiconductors of In0.08Ga0.92Sb and In0.15Ga0.85As were investigated through Hall-effect and photoluminescence measurements to determine carrier concentration, mobility, sheet resistivity, and luminescence spectrum. In the past, epitaxial layers of ternary compounds have been grown on binary compound substrates, and thus very limited lattice matched ternary alloys were available. Recently, bulk grown ternary substrates have been developed, and it has presented a renewed interest in using these substrates to grow high quality ternary compounds for use in many next generation optoelectronic devices. The results of photoluminescence (PL) study for the …

Go to article

Preparation And Performance Of Co And La Co-Doped Li-Rich Lithium Manganate, Da-Qiao Zhou Feb 2009

Preparation And Performance Of Co And La Co-Doped Li-Rich Lithium Manganate, Da-Qiao Zhou

Journal of Electrochemistry

The cathode material of Li1.1Co0.02La0.01Mn2O4 was successfully synthesized by the method of co-precipitation followed by a solid state reaction.In the sintering temperature range of 700～850 ℃,X-ray diffraction(XRD) results showed a single phase of each material and the increase of crystallization degree,and scanning electron microscopic(SEM) images indicated that the particle size increased and the specific surface area decreased,respectively,with increasing the sintering temperature.Due to its lower polarization resistance,the Co and La co-doped lithium-rich lithium manganate(sintered at 800 ℃) positive electrodes showed the most promising electrochemical performance.The capacity retention after 50 cycles reached 98.5%.

Go to article

Electrochemical Properties Of Functionalized Carbon Nanotubes And Their Applications In Analysis Of 6-Mercaptopurine, Bao-Yi Lu, Yan-Yan Lai, Hong Li Feb 2009

Electrochemical Properties Of Functionalized Carbon Nanotubes And Their Applications In Analysis Of 6-Mercaptopurine, Bao-Yi Lu, Yan-Yan Lai, Hong Li

Journal of Electrochemistry

The electrochemical behaviors and adsorption properties of single-walled carbon nanotubes such as SWNT,SWNT-COOH,and SWNT-OH and multi-walled carbon nanotubes including MWNT,MWNT-COOH,and MWNT-OH modified at a graphite electrode have been investigated by using [Fe(CN)6]3-anion and [Co(phen)3]3+ cation.It was shown that shows good redox reversibility of [Fe(CN)6]3-/4-reactions on the existed carbon nanotubes(CNT) modified electrode.Based on the strong adsorptive property of [Co(phen)3]3+ on the CNT surface,the [Co(phen)3]3+/CNT modified graphite electrode can be obtained by progressive potential sweeping and developed to monitor quantitatively 6-mercaptopurine(6-MP).The adsorption capacity of …

Go to article

First Prev Next Last