Chemistry Commons^™

Electrochemical Properties Of Tungstogermanate And Electrocatalysis Of H2O2 On Gew11Co/P-Opd/Gc Electrode, Li-Li Zhu, Jian-Ying Qu, Jue Wang, Hao-Yue Feng

Journal of Electrochemistry

The electrochemical properties of Co-substituted trimeric tungstogermanate containing Keggin fragments were studied. Cyclic voltammograms revealed two couples of reversible redox peaks on glassy carbon (GC) electrode in acid solutions. They corresponded to two-electron reductions accompanying by the additions of four protons and three protons, respectively, both were controlled by adsorption. The differences in the peak potentials of 2-electron-4-proton and 2-electron-3-proton reactions were 31 mV and 35 mV, respectively..Furthermore, the tungstogermanate (GeW11Co) modified GC electrode with functionalization by poly(o-phenylenediamine) (P-oPD) was prepared readily by electropolymerization. The GeW11Co/P-oPD/GC electrode could electrocatalyze the reduction of hydrogen peroxide, which showed good stability and quick …

Electrochemical Studies On Surface Inclusion Of Β-Cyclodextrin With Adriamycin, Jian Shi, Qi-Ping Zhang, Nan-Ping Wang

Journal of Electrochemistry

The β-cyclodextrin (β-CD) modified gold electrode (β-CD/Au) was fabricated to study the electrochemical behavior of adriamycin (ADM). The results indicated that the complexing reaction of ADM with β-CD took place at the β-CD/Au surface. At 25 °C, the complexing constant (K) was 9.54×10⁴ L·mol^-1 in pH=7.0. The K values changed regularly with temperature, and the most suitable temperature of the surface inclusion reaction was 30 ℃. The complexing reaction of ADM with β-CD at the β-CD/Au surface could undergo the quasi-reversible electrochemical reaction with the rate constant being 0.0995 s^-1. The cathodic peak current (Ip) of …

Indirect Electrochemical Reduction And Cotton Dyeing Process In Fe(Ⅲ)-Oxalate-Calcium Gluconate System, Qing-Zhi Wang, Wei Wang

Journal of Electrochemistry

The electrochemical behavior and possible reaction mechanism in Fe(Ⅲ)-oxalate-calcium gluconate system were studied by cyclic voltammetry. The results showed that Fe(Ⅱ)-gluconate was the final reductant. The reduction time, the working voltage and the cathode area influenced the current efficiency. The high current efficiency of 89% for the indirect electrochemical reduction of Vat Scarlet R could be achieved with reduction time of 10 min, working voltage of 4 V and cathode area of 40 cm² in Fe(Ⅲ)-oxalate-calcium gluconate system.

Electrochemical Behaviors Of Hydroquinone On Polypyrrole/Stab-Nammt/Gc Electrode, Rong Li, Jian Xiong, Wei-Qiong Zhu, Yuan-Yuan Han, Jin Xu, Xiao-Ying He

Journal of Electrochemistry

The PPy/STAB-MMT/GC electrode was made using montmorillonite modified by STAB and polypyrrole (PPy). The electrochemical behaviors of hydroquinone on the PPy/STAB-MMT/GC electrode were researched by cyclic voltammetry and square wave stripping voltammetry (SWSV). The results showed that the electrode reaction occurred on the hydroquinone electrode was controlled by diffusion in PBS (pH=6.0). The number of electron transfer was equal to the number of protons (n=m=1) with the effective area of PPy/STAB-MMT/GC electrode Aeff=0.031 cm². Under the optimized conditions, the linear response of peak current in SWSV with the concentration of hydroquinone in a range of 8.0×10^-6~8.0×10 …

Preparation And Characterization Of A Composite Of Gold Nanoparticles And Single-Walled Carbon Nanotubes And Its Potential For Heterogeneous Catalysis, Anne Shanahan, James Sullivan, Mary Mcnamara, Hugh Byrne

Articles

A single-walled carbon nanotube-supported gold nanoparticle composite was prepared and characterized by X-ray diffraction, scanning transmission electron microscopy/scanning electron microscopy/transmission electron microscopy, energy-dispersive X-ray analysis, atomic absorption spectroscopy, nitrogen adsorption, Raman spectroscopy, and ultraviolet-visible spectroscopy. The Au particles were found to be crystalline, with a well-defined and narrow particle-size distribution, centered around 7 nm. The activity and selectivity of the composite for solventless aerobic oxidation of a secondary alcohol were examined, and a conversion efficiency of 95% was obtained.

Wetting Properties Induced In Nano-Composite Poss-Ma Polymer Films By Atomic Layer Deposited Oxides, Kyle A. Vasquez, Anita J. Vincent-Johnson, W. Chris Hughes, Brian H. Augustine, Kyoungmi Lee, Gregory N. Parsons, Giovanna Scarel

Department of Physics and Astronomy - Faculty Scholarship

Due to their unique properties, nano-composite polyhedral oligomeric silsequioxane (POSS) copolymer films are attractive for various applications. Here we show that their natural hydrophobic character can become hydrophilic when the films are modified by a thin oxide layer, up to 8 nm thick, prepared using atomic layer deposition. A proper choice of the deposition temperature and thickness of the oxide layer are required to achieve this goal. Unlike other polymeric systems, a marked transition to a hydrophilic state is observed with oxide layers deposited at increasing temperatures up to the glass transition temperature (∼110 °C) of the POSS copolymer film. …

A Modified Surface On Titanium Deposited By A Blasting Process, Caroline O' Sullivan, Peter O'Hare, Greg Byrne, Liam O'Neill, Katie B. Ryan, Abina M. Crean

Publications

Abstract

: Hydroxyapatite (HA) coating of hard tissue implants is widely employed for its biocompatible and osteoconductive properties as well as its improved mechanical properties. Plasma technology is the principal deposition process for coating HA on bioactive metals for this application. However, thermal decomposition of HA can occur during the plasma deposition process, resulting in coating variability in terms of purity, uniformity and crystallinity, which can lead to implant failure caused by aseptic loosening. In this study, CoBlast™, a novel blasting process has been used to successfully modify a titanium (V) substrate with a HA treatment using a dopant/abrasive regime. …

Study On Residual Powders Of Lithium-Ion Batteries With Different Voltages After Explosion, He Li, Zhi-Kui Chen, Ji-Na Cao, Guang-Chuan Liang

Journal of Electrochemistry

The residual powders of lithium-ion batteries at different voltages after explosion were obtained by using the battery impact testing machine. And these powders have been investigated by weighing, water solution and X-ray diffraction (XRD). The results showed that the integrity status of copper current collector and weight of residual powders decreased gradually with increasing of battery voltage, rising of burning temperature and releasing of burning duration time. The residual powders could be separated to insoluble powders and soluble powders by the water solution. The proportion of the insoluble powders is more (about 90%) including C, Co and CoO, while the …

Development Of Dehydrogenase-Based Bioanode Using Poly(Phenosafranin)-Functionalized Swcnt Nanocomposites And Its Application To Ethanol Biosensor, S. Saleh Farhana, Okajima Takeyoshi, Lanqun Mao, Takeo Ohsaka

Journal of Electrochemistry

A New type of dehydrogenase-based amperometric ethanol biosensor was constructed using alcohol dehydrogenase (ADH) which was immobilized on the edge-plane pyrolytic graphite (EPPG) electrode modified with poly(phenosafranin)-functionalized single-walled carbon nanotube (PPS-SWCNT). The PPS-SWCNT modified EPPG electrode was prepared by electropolymerization of phenosafranin on the EPPG electrode which was previously coated with SWCNT. The performance of the ADH/PPS-SWCNT/EPPG electrode was evaluated using cyclic voltammetry and amperometry in the presence of ethanol. The fabricated ethanol biosensor provided a reasonable sensitivity of 2.0 μA cm–2 mM–1 and a low detection limit (36 μM) for the electrocatalytic oxidation of ethanol with a linear concentration …

Surface Diffusion Of Adsorptive Species On Gold Nanoelectrodes, Bao-Fa Su, Wei Wang, Dong-Ping Zhan, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Gold nanoelectrodes were prepared successfully by a programmed laser puller. The Faraday adsorptions of oxygen and iodine, and the underpotential deposition of lead on the gold nanoelectrodes were investigated. The results showed that the active areas of nanoelectrodes were dramatically higher than their appearant geometry areas, which is caused by the surface diffusion of adsorptive species from the nanoscale gold/electrolyte interface to the adjacent gold surface.

Preparations And Characters For Acetamiprid Of Molecular Imprinted Polymer Electrochemical Sensors, Bin Liu, Yong-Xing Huang, Hui-Ting Lian, Hong-Mei Wu

Journal of Electrochemistry

A novel molecularly imprinted membranes electrochemical sensor with good memory capacity to acetamiprid was developed. Based on electrodeposition technique, chitosan was deposited onto the surface of gold electrode as a functional polymer matrix along with aimed molecules acetamiprid and glutaraldehyde as a crosslinking agent. Cationic probe Ru(NH₃)₆Cl₃ was employed to indirectly investigate the electrochemical characteristics as well as the imprinted effect of the sensors. The results showed that the sensors had a specific recognition to acetamiprid compared to the structural similarity midacloprid and other pesticide. There is more sensitive response to acetamiprid at imprinted sensors …

Electrochemical Performance Of Tin Dioxide/Carbon Xerogel Composites As Anode Materials For Lithium-Ion Batteries, Xiao-Jing Liu, Lin-Lin Qin, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The tin dioxide/carbon xerogel composites were synthesized by using vacuum infiltration method. Structural characterization and morphology of the composites were investigated by using XRD, TEM and SEM techniques. BET test was performed to determine the pore size distributions of carbon xerogels and the composites. The results showed that the nano-sized SnO₂ particles (5~10 nm) were encapsulated in the pores of carbon xerogels. During the electrochemical tests the SnO₂ in the composites exhibited capacity retention of 61.9% after 100 cycles of charge-discharge tests at 100 mA/g.

Electrochemical Analysis Based On Molecular Recognition Of Nucleic Acids And Its Applications, Dian-Ming Zhou, Jian-Hui Jiang, Guo-Li Shen, Ru-Qin Yu

Journal of Electrochemistry

Nucleic acid as the carrier of genetic information and the functional molecules for molecular biology and bioanalytical chemistry has attracted increasing interest in electrochemical analysis. This review presents a brief outline of some electrochemical analytical assays based on molecular recognition of nucleic acids. Most of these methods are focused on the detection of nucleic acid sequence, genetic mutation and nucleic acids as functional molecules.

Study On The Fluorescent Carbon Nanodots With Electrochemical Methods, Bao-Ping Qi, Yan-Min Long, Lei Bao, Cui Liu, Zhi-Ling Zhang, Dai-Wen Pang

Journal of Electrochemistry

Carbon nanodots are a new class of fluorescent nanoparticles with a carbon-based core, which possess wavelength-tunable luminescence, high photostability, resistance to photobleaching, water-solubility, and ease of bioconjugation. Owing to their attractive merits, carbon nanodots like other carbon nanomaterials such as fullerene, carbon nanotubes and graphene, have attracted much attention. In addition, carbon nanodots can be inexpensively produced by electrochemical methods with simple post-processing under mild conditions. Electrochemical approaches have unique advantages in the analysis of surface structures and luminescence mechanism of materials. In this review, recent advances in electrochemical methods used for the synthesis and luminescence mechanism of fluorescent carbon …

Fabrication Of Ito Micro-Pore Electrochemical Sensor And The Detection Of Exocytosis, Hui Zhao, Ling Li, Pin-Gang He, Yu-Zhi Fang

Journal of Electrochemistry

Exocytosis is one of the major means for cells to transmit messages. Amperometric detection of exocytosis is an important method in studying communication between cells. In this study a new type of ITO micro-pore electrochemical sensor was fabricated by means of ITO and UV light lithographic mask and was used in the detection of exocytosis with promising results. Compared with the conventional method, the ITO micro-pore sensor can not only replace the carbon fiber electrode, but be combined with fluorescent or chemiluminescent methods in detecting the physiological phenomena of cells.

Study On The Electrochemical Behaviors Of Gc Electrode Modified With Carbon Nanotube-Polyelectrolytes And Its Application For Rutin Detection, Liang Hua, Xia-Qin Wu, Rong Wang

Journal of Electrochemistry

The electrochemical behaviors of rutin and ascorbic acid at single-wall carbon nanotube and polyelectrolytes (dimethyl-diallylammonium chloride, PDDA) film modified glassy carbon electrode was investigated. The cyclic voltammetric results showed that electron transfer of rutin at PDDA/SWCNTs/GC modified electrode is an adsorption-controlled process. The separation of oxidation peak potentials of rutin and ascorbic acid was more than 200 mV. The rutin concentration in the presence of AA were detected by differential pulse voltammetry (DPV). The experimental results indicated that the PDDA/SWCNTs/GC modified electrode can be used for the detection of rutin in the presence of high concentration of AA. The DPV …

Brief Introduction To Metal Corrosion And Protection, Hou-Yi Ma, Cong-Ying Cui, Ting Chen

Journal of Electrochemistry

This paper explains why corrosion processes are usually electrochemical in nature, describes the significance of electrochemical kinetic parameters of corrosion process, and briefly introduces the principles of corrosion protection, the most common corrosion protection methods and some special application of corrosion processes.

Effects Of Graphene On Electrochemical Behaviors Of Ni(Oh)2 As Supercapacitor Material, Zhen-Zhen Zhao, Wen-Bin Ni, Neng-Yue Gao, Hong-Bo Wang, Jian-Wei Zhao

Journal of Electrochemistry

The enhanced electrochemical properties of Ni(OH)₂ by the oxidation defected graphene were studied by both experimental method and theoretical calculation. The composite material of nano-Ni(OH)₂/graphene was prepared by potentiostatic deposition on the graphene substrate. Observed by TEM, the Ni(OH)₂ nanoparticles were well dispersed on the graphene substrate with the diameter of 5.0±0.5 nm. The capacitance of the system measured by the electrochemical test was 1928 F·g^-1. As indicated by the theoretical calculations, the composite material becomes conductive since Ni(OH)₂ is combined with surface functional groups of the graphene through the strong chemical interaction. …

Synthesis Of Limnpo4/C Used As Cathode Material For Lithium Ion Batteries, Xin Yang, Xue-Wu Liu, Gui-Chang Liu, Zhi-Cong Shi, Xin Li, Guo-Hua Chen

Journal of Electrochemistry

The LiMnPO₄/C composites were prepared using a solid-state reaction with addition of the resorcinol formaldehyde resin as the carbon source. The effects of reaction temperature and time on the crystal structure, morphology and electrochemical properties of the LiMnPO₄/C composites were investigated. The results show that the best performance was achieved with the LiMnPO₄/C composites synthesized at 600 ^oC for 12 h which had the particle sizes about 100~200 nm. The initial discharge capacities were 121.6 mAh·g^-1 at 0.02C, 110 mAh·g^-1 at 0.1C and more than 60 mAh·g^-1 at 1C. An …

Photogenerated Cathodic Protection Of Stainless Steel, Cheng-Gang Lin, Ze-Quan Lin, Jing Li, Chang-Jian Lin

Journal of Electrochemistry

A highly ordered Co-doped TiO₂ nanotube layers were fabricated by potentiostatic anodization of pure titanium in fluorinated electrolyte solutions followed by ion-exchange method. The structure and composition of the as-prepared Co-doped TiO₂ nanotube layers were characterized by SEM, XRD, UV-Vis, and XPS. The effects of dopant content on the morphologies, structural and photochemical properties of the TiO₂ nanotube arrays were investigated. The performances of photogenerated cathodic protection and the photoelectrochemical response for the Co-doped TiO₂ nanotube arrays under illumination and dark conditions were evaluated through the electrochemical measurements. The Co-doped TiO₂ nanotubes showed a stronger …

Synthesis And Electrochemical Behaviors Of Li2Coxmn1-XSio4 As A Cathode Material For Lithium-Ion Batteries, Lin Wang, Dong-Ping Lv, Yong Yang

Journal of Electrochemistry

We have successfully synthesized Li₂Co_xMn_1-xSiO₄/C (x=0, 0.1, 0.3, 0.5, 1)/C composites using hydrothermal assisted sol-gel process and ball-milling method. The results of X-ray diffraction show that the solid solutions of Li₂Co_xMn_1-xSiO₄ can be achieved when x≤0.3. The initial capacities increase from 70 mAh·g^-1 of Li₂MnSiO₄/C to 105 mAh·g^-1 of Li₂Co_0.3Mn_0.7SiO₄/C. Cyclic Voltammetry (CV) curves show that the replacement of Mn with Co can reduce the electrochemical polarization, making the insertion-extraction reaction …

Corrosion Characteristics Of Galvanized Flat Steel For Power Grounding In Nacl Solution Medium, Yong Li, Gao-Lin Wu, Bang-Fei Deng, Ping Yang, Xue-Ming Li, Qing-Bin Zong

Journal of Electrochemistry

The corrosion behavior of power grounding galvanized flat steel was studied by polarization measurement, electrochemical impedance spectroscopy and neutral salt spray test in 5% NaCl solutions. The surface morphologies of galvanized coating and structural properties of corrosion products were observed with scanning electron microscope and X-ray diffraction spectrometer, respectively. Results showed that under the temperatures of 20~60℃, the corrosion currents of galvanized flat steel increased with the temperature rising. The corrosion rate at 60℃ was 0.8408 mA·cm^-2, which is 2.9 times larger than that at 20℃. The corrosion rate dropped after reaching the maximal value of 1.95 mg·cm …

Electrelectrochemical Performances Of C-Coating And Co-Doping Lifepo4, Ying Bai, Jue-Ming Yang, Chun-Bo Qing, Wei-Feng Zhang

Journal of Electrochemistry

Phospho-olivine LiFePO₄ cathode materials were prepared by hydrothermal reaction at 200 ^oC. Sucrose was added as C-coating resource and Co was doped into the crystal lattice of LiFePO₄. In order to investigate the improvements in the electrochemical properties of Co-doped LiFePO₄, three samples, LiFePO₄, C-coated LiFePO₄ and C-coating-Co-doped LiFePO₄, were synthesized under the same preparation conditions. Charge/discharge studies reveal that the Co-doped LiFePO₄/C composite annealed at 400 ^oC exhibits marked improvement of specific capacity by diminishing the particle sizes and enhancement in the degree of crystallinity. …

Simultaneous Determination Of Dopamine(Da)And Epinephrine (Ep) At Ca/Gc Electrode, Wang Ren, Ying Zhang, Min-Jiao Li

Journal of Electrochemistry

The citric acid modified glassy carbon electrode (CA/GC) was prepared by potentiostatic technique and was used for detections of dopamine (DA), epinephrine (EP), and their mixtures by differential pulse voltammetry (DPV). The modified electrode shows the enhanced sensitivity and excellent electrochemical discrimination to DA and EP. The cathodic potential difference between DA and EP was about 380 mV, while no cathodic reduction of ascorbic acid (AA) was observed because the oxidation of AA is an irreversible reaction at the sensor. As a result, DA and EP could be determined simultaneously with the interferences of high concentrations of AA being eliminated. …

Vapor Liquid Solid Growths Of Germanium And Gallium Antimonide Nanowires, Ralph Alvarez, Esmeralda Arreola, Michael Oye, Meyya Meyyappan

STAR Program Research Presentations

Determining the optimal growth parameters for germanium (Ge) and gallium antimonide (GaSb) nanowires is the focus of this research. Given the fact that nano materials behave differently from their bulk counterparts we are researching some variables that influence nanowire diameter and length such as temperature, ramp rate, gas flow rate, and catalyst particle size. Based on the nano material size which is typically a few 10s of nanometers wide, these nano materials can be engineered to take advantage of their optical properties. Specifically the infrared (IR) response of Ge and GaSb nanowires are directly controllable based on their geometry. Fine …

Effects Of Ambient Gases On Icf Target Capsules, Bryan Chambers, Steve Letts, Michael Stadermann

STAR Program Research Presentations

We researched how the chemical and physical properties of a plasma polymer fuel capsule change as they are exposed to ambient gases. The fuel capsules contain the deuterium fuel inside them, they serve as the outer shell for the fuel and act as a ablator for the process. If they are reactive or diffusive with the atmosphere this can change their mass and effect the outcome of the fusion shots performed at the National Ignition Facility where High Powered Lasers are incident upon a gold hohlraum containing a capsule. We discovered that nitrogen and water vapor diffuse into the material …

Effect Of Au Content On Microstructural Evolution Of Snagcu Solder Joints That Undergo Isothermal Aging And Reliability Testing, Patrick J. Hyland

Master's Theses

Electronics, especially, printed circuit boards (PCBs) are a widespread technology. Metal coatings or “surface finishes” are often added to PCB board pads and component leads during manufacturing to improve their performance. Electroplated nickel/gold over copper is a popular surface finish for printed circuit boards and component leads. The presence of gold in solder joints, however, is known to have detrimental effects referred to as gold embrittlement. It is generally understood that tin-lead solder joints with less than 3 weight percent (wt%) of gold will not experience reliability issues. The acceptable level of gold in lead-free solder joints, however, is less …

Regiospecific Synthesis Of Ortho Substituted Phenols, Ravindra Kotha Balasainath

Masters Theses & Specialist Projects

Phenol is highly reactive toward electrophilic aromatic substitution. By this general approach, many groups can be appended to the ring, via halogenation, acylation, sulfonation, and other processes. Phenol contains the hydroxyl group (–OH), which is a strongly activating ortho/para directing group in aromatic electrophilic substitution (AES). AES gives a mixture of ortho-and para isomers, which must be separated.

The strong directing ability of phenol can also result in multiple substitutions on the aromatic ring which could be a major concern in the regiospecific synthesis of phenols. AES and Directed ortho--Metalation (DoM) are the only ways to directly substitute …

Single-Step Biofriendly Synthesis Of Surface Modifiable, Near-Spherical Gold Nanoparticles For Applications In Biological Detection And Catalysis, Vivek D. Badwaik

Masters Theses & Specialist Projects

There is an increased interest in understanding the toxicity and rational design of gold nanoparticles (GNPs) for biomedical applications in recent years. Such efforts warrant reliable, viable, and biofriendly synthetic methodology for GNPs with homogeneous sizes and shapes, particularly sizes above 30 nm, which is currently challenging. In the present study, an environmentally benign, biofriendly, singlestep/ single-phase synthetic method using dextrose as a reducing and capping agent in a buffered aqueous solution at moderate temperature is introduced. The resulting GNPs are near-spherical, stable, catalytically active, place exchangeable, and water-soluble within the size range of 10-120 nm. The added advantage of …

Fullerene-Based Organized Self-Assembled Photoactive Layer, Marcelo A. Yates ^, Danisha M. Rivera, Luis Echegoyen *

COURI Symposium Abstracts, Summer 2011

No abstract provided.