Chemistry Commons^™

Prediction Of Metal Remobilization From Sediments Under Various Physical/ Chemical Conditions “Design Of Experiments Cd, Co And Pb”, Eid A. Alkhatib, Trey Chabot, Danielle Grunzke

Chemistry & Physics Faculty Publications

The metal partition coefficient Kd (L/kg) is the ratio of sorbed metal concentration on the solid phase m (mg/kg) to the dissolved metal concentration at equilibrium. The behavior of metals in surface water is complex and their partition coefficients can be impacted by many factors. Organic matter (OM) content in sediments, pH and salinity, are factors that may influence speciation and partitioning of metals. In this study, the partitioning coefficient of three metals (Cd, Co and Pb) under different levels of salinity, pH, and OM content were examined. A series of factorial experiments were evaluated in which three levels of …

Excitonic States In Crystalline Organic Semiconductors: A Condensed Matter Approach, Lane Wright Manning

Graduate College Dissertations and Theses

In this work, a new condensed matter approach to the study of excitons based on crystalline thin films of the organic molecule phthalocyanine is introduced. The premise is inspired by a wealth of studies in inorganic semiconductor ternary alloys (such as AlGaN, InGaN, SiGe) where tuning compositional disorder can result in exciton localization by alloy potential fluctuations. Comprehensive absorption, luminescence, linear dichroism and electron radiative lifetime studies were performed on both pure and alloy samples of metal-free octabutoxy-phthalocyanine and transition metal octabutoxy-phthalocyanines, where the metal is Mn, Co, Ni, and Cu. Varying the ratios of the metal to metal-free phthalocyanines …

Investigating The Influence Of Gold Nanoparticles On The Photocatalytic And Catalytic Reactivity Of Porous Tungsten Oxide Microparticles, Daniel P. Depuccio

Graduate College Dissertations and Theses

Tungsten oxide (WO3) is a semiconducting transition metal oxide with interesting electronic, structural, and chemical properties that have been exploited in applications including catalysis, gas sensing, electrochromic displays, and solar energy conversion. Nanocrystalline WO3 can absorb visible light to catalyze heterogeneous photooxidation reactions. Also, the acidity of the WO3 surface makes this oxide a good thermal catalyst in the dehydration of alcohols to various industrially relevant chemicals. This dissertation explores the photocatalytic and thermal catalytic reactivity of nanocrystalline porous WO3 microparticles. Furthermore, investigations into the changes in WO3 reactivity are carried out after modifying the porous WO3 particles with gold …

A Study Of The Physicochemical Properties Of Dense And Mesoporous Silica Nanoparticles That Impact Protein Adsorption From Biological Fluids, Alden Michael Clemments

Graduate College Dissertations and Theses

At the intersection of materials chemistry and biology, biomaterials have been successfully employed in an array of medical applications. From diagnostic tools to targeted drug delivery, the modular physical and chemical properties of these materials provide numerous applications. For example, porous nanoparticles have been widely integrated as vehicles to carry chemotherapeutics to localized tumor sites. By encapsulating these cytotoxic compounds within a porous framework, the commonly associated adverse side effects of conventional chemotherapeutics, such as Doxorubicin, have been greatly reduced. One such material, mesoporous silica, has received widespread attention due to its excellent biocompatibility, high surface area to mass ratio, …

Biolabeling Through The Use Of Water-Soluble Colloidal Quantum Dots, Cody Stombaugh

Honors Projects

Nanomaterials continues to be a growing field of study due to their wide range of potential applications. Quantum dots are artificially synthesized crystalline clusters of atoms able to confine electron motion as a result of their incredibly small size. Recently, medical applications of nanomaterials have expanded greatly. Quantum dots are ideal for biolabeling due to their rather narrow photoluminescence emission peaks. By synthesizing quantum dots of a specific diameter, it is possible to predetermine the peak photoluminescence wavelength of a sample. Through ligand exchange and immunoconjugation of the quantum dots with proteins, it is possible to use the quantum dots …

Degradation And Exciton Energy Transfer Studies In Single-Walled Carbon Nanotube Bundles, Abhishek Gottipati

Legacy Theses & Dissertations (2009 - 2024)

Single walled carbon nanotubes (SWNTs) due to their unique optical behavior, large surface area, robust mechanical strength and electrical properties make them one of the ideal candidates for sensing and opto-electronic applications. In this work, we explore the energy transfer (exciton energy transfer-EET) phenomena occurring between nanotubes in bundles, using resonance Raman spectroscopy.

Targeted Delivery Of Nrf2 Sirna Using Modular Polymeric Micellar Nanodelivery System For Efficient Target Gene Knockdown In Hepatocellular Carcinoma, Shaimaa Mohamed Ibrahim Yousef

Wayne State University Theses

Tumor selective drug delivery as well as chemotherapy associated multi drug resistance (MDR) pose tremendous hurdles for effective cancer therapy. In this regard, designing multifunctional nanocarriers loaded with drug/gene payloads and engineered with tumor targeting ligands can serve as a modular platform for targeted drug/gene delivery. In this study we undertook the synthesis of a self-assembling block copolymer constructed using poly(styrene-co-maleic anhydride, partial iso-octyl ester) (SMAPIE) and branched polyethylenimine (PEI) as building blocks and evaluated its micelle forming ability, siRNA complexation and siRNA delivery potentials. In addition, we engineered galactosamine decorated nanomicelles using modular “click” chemistry based approaches for evaluating …

New Approaches To Chalcogenide Materials For Thermoelectrics: Lead Telluride-Based Nanostructures And Facile Synthesis Of Tetrahedrite And Doped Derivatives, Derak Justin James

Wayne State University Dissertations

The overall purpose of this work is to address several of the roadblocks to use of thermoelectric materials for generation of electricity, namely inefficient processing of materials and low performance, commonly rated by the figure of merit, ZT=T2/tot. The ZT includes  as the Seebeck coefficient,  as electrical resistivity, T as the average temperature, and tot as total thermal conductivity. tot is the sum of electronic charge carrier (C) and lattice (L) contributions to thermal conductivity. Attempts to increase ZT in the literature to values >1 have focused on decreasing the thermal conductivity via nanostructuring or optimizing the electrical …

Novel Approaches For Assessment Of Copper Toxicity: Fast Scan Cyclic Voltammetry And Optical Bioassays, Annette R. Tremonti

Wayne State University Dissertations

Anthropogenic activities negatively impact fresh water ecosystems through toxic contaminants that are released into the environment. Copper (Cu) is a water contaminant that is fundamentally persistent once introduced into the environment that has the potential for bioaccumulation. Although Cu toxicity has been studied for decades, there is still a continuing problem with new sources and pathways. New approaches are needed to understand distribution and transport of Cu and its potential for complex biological impacts beyond the simple assessment of lethality. Several novel approaches were used in this research project to advance our understanding of Cu toxicity, including fast scan cyclic …

Understanding Electrical Conduction In Lithium Ion Batteries Through Multi-Scale Modeling, Jie Pan

Theses and Dissertations--Chemical and Materials Engineering

Silicon (Si) has been considered as a promising negative electrode material for lithium ion batteries (LIBs) because of its high theoretical capacity, low discharge voltage, and low cost. However, the utilization of Si electrode has been hampered by problems such as slow ionic transport, large stress/strain generation, and unstable solid electrolyte interphase (SEI). These problems severely influence the performance and cycle life of Si electrodes. In general, ionic conduction determines the rate performance of the electrode, while electron leakage through the SEI causes electrolyte decomposition and, thus, causes capacity loss. The goal of this thesis research is to design Si …

Carinata Fame Production Process And Biofuel Oxidation, Benoit Kindo

Honors College Theses

In this experiment, the contribution of a standard production method for biofuels on their oxidative stability was investigated. Peroxide values were measured at different steps of the production process of Brassica carinata and peanut-based biofuels. The washing and drying steps in this production method showed significant increases in peroxide values for both biofuels and was identified as a major contributor of biofuel oxidation. Further analyses of the physical and thermal properties showed a more pronounced affect in the biofuel from Bassica carinata, and indicated an unusual composition much higher in saturated fatty acids much longer than those found in peanut. …

Single Particle-Inductively Coupled Plasma-Mass Spectrometry Technology Development For Metallic Nanoparticle Characterization In Complex Matrices, Yongbo Dan

Doctoral Dissertations

"As the rapid growing of nanotechnology, the release of engineered nanoparticles (ENPs) into the environment is inevitable. After entering the real environment, ENPs tend to react with different components of the ecosystem (e.g. water, soil, air, plants) and make their characterization difficult. Analyzing ENPs in these complex matrices still remains as a grand challenge. ENPs characterization is normally the first step of risk assessment. Current analytical techniques have shown some limitations in revealing the unique characteristics of ENPs in complex matrices and reliable analytical techniques are in urgent need. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) is an emerging …

Bioactivity/Cytotoxicity Of Micro-/Nano-Materials And Novel Development Of Fiber-Optic Probes For Single Cell Monitoring, Qingbo Yang

Doctoral Dissertations

"Manufactured nano-/micro-materials (MNMs) have been widely used and their interactions with niche biological environment are highly concerned for both of their biohazardous and bioactive effects, whereas no available comprehensive evaluations or regulations have been provided yet. This dissertation thus focuses on three major aspects: 1) fundamental toxicity understandings of a typical MNMs (zinc oxide nanoparticles), 2) bioactivity evaluations of representative bioactive MNMs, and 3) development of novel micro-probes for high spatial resolution monitoring. Firstly, the NP's concentration, irradiation, hydrodynamic size, and the localized pH, ionic strength, NP zeta-potential as well as dissolved oxygen levels were found correlated with the production …

Synthesis And Functionalization Of A Triaryldiamine-Base Photoconductive/Photorefractive Composite, And Its Application To Aberrated Image Restoration, Yichen Liang

Doctoral Dissertations

"Organic photorefractive (PR) composites have recently emerged as an important class of materials for applications including high-density data storage, optical communication, and biomedical imaging. In an effort to further improve their performance, this study focused on the utilization of functionalized semiconductor nanocrystals to photosensitize triaryamine (TPD)-based PR composites, as well as the application of TPD-based PR composites in the restoration of aberrated optical information. A novel approach to functionalize CdSe quantum dot (QCdSe) was firstly introduced where the sulfonated triarydiamine (STPD) was used as charge-transporting ligand to passivate QCdSe. TPD-based photoconductive and PR composites were photosensitized with the STPD-passivated QCdSe …

Improving The Engineering Properties Of Pla For 3d Printing And Beyond, Carmen R. Rocha

Open Access Theses & Dissertations

Additive manufacturing (AM), now more commonly known as 3D printing, has been classified as efficient, fast, and practical in the prototyping sector of product development. In the work presented here, we will use one of the AM techniques known as Material extrusion 3D printing (ME3DP), which has all the advantages of AM. However, one of the biggest challenges facing ME3DP technologies is the limitation of the range of materials used by this technique. Acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) are currently the most common thermoplastics materials used in ME3DP because of their ability to melt and be reprocessed. …

Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan

Masters Theses

"Single particle (SP)-ICP-MS methods were developed to characterize and quantify Ti-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. Six-gang stirrers were used to simulate drinking water treatments including lime softening, alum coagulation, powdered activated carbon sorption, filtration, and disinfection by free chlorine. Lime softening effectively removed most nanoparticles added. Source and drinking waters from three large …

Uv Light-Induced Aggregation Of Titania Submicron Particles, Can Zhou, Yashar Bashirzadeh, Timothy A. Bernadowsky Jr., Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

In this study, aggregation of TiO₂ (rutile and anatase) submicron particles in deionized (DI) water under ultra-violet (UV) light irradiation was investigated. While no aggregation was observed in the dark, rutile and anatase submicron particles started aggregating upon application of UV light and ceased aggregation in about 2 and 8.4 h, respectively. It has been demonstrated that UV light directly mitigated the particle mobility of TiO₂, resulting in a neutralization effect of the Zeta potential. It was also observed that rutile particles aggregated much faster than anatase particles under UV radiation, indicating that the Zeta potential of …

Optimizing Solvent Blends For A Quinary System, Thomas L. Hoy

Williams Honors College, Honors Research Projects

The Department of Polymer Engineering had received a grant from the Keck foundation to produce a process in which hundreds of copolymers can be formulated, synthesized, analyzed and then extrapolated to produce the optimal polymer for the desired material property. This process involves synthesizing approximately fifty polymers in a custom apparatus, none of which necessarily have the same monomer components. This leads to issue of which solvent or blend of solvents to use that would sufficiently dissolve both monomers and the resulting copolymer. If the monomers are not completely dissolved, a homogenous reaction will be impossible and if the copolymer …

Measurement Of Rare Earth And Uranium Elements Using Laser-Induced Breakdown Spectroscopy (Libs) In An Aerosol System For Nuclear Safeguards Applications, Ammon N. Williams

Theses and Dissertations

The primary objective of this research is to develop an applied technology and provide an assessment for remotely measuring and analyzing the real time or near real time concentrations of used nuclear fuel (UNF) elements in electrorefiners (ER). Here, Laser-Induced Breakdown Spectroscopy (LIBS) in UNF pyroprocessing facilities was investigated. LIBS is an elemental analysis method, which is based on the emission from plasma generated by focusing a laser beam into the medium. This technology has been reported to be applicable in solids, liquids (includes molten metals), and gases for detecting elements of special nuclear materials. The advantages of applying the …

Fabricating Superhydrophobic And Superoleophobic Surfaces With Multiscale Roughness Using Airbrush And Electrospray, Karam N. Almilaji

Theses and Dissertations

Examples of superhydrophobic surfaces found in nature such as self-cleaning property of lotus leaf and walking on water ability of water strider have led to an extensive investigation in this area over the past few decades. When a water droplet rests on a textured surface, it may either form a liquid-solid-vapor composite interface by which the liquid droplet partially sits on air pockets or it may wet the surface in which the water replaces the trapped air depending on the surface roughness and the surface chemistry. Super water repellent surfaces have numerous applications in our daily life such as drag …

Chemical Removal Of Total Phosphorus From Wastewater To Low Levels And Its Analysis, Farah Ateeq

Theses and Dissertations (Comprehensive)

Numerous studies have been conducted on the removal of inorganic phosphorus (P) from wastewater, but a push towards lower effluent targets necessitates the additional removal of organic phosphorus as well. This study tested the ability of manganese oxide nanoparticles and iron oxide as potential catalysts for conversion of organic P into more readily removable inorganic forms, as well as the role of iron(III) chloride as coagulant to subsequently allow P to be removed by solids/liquid separation. Removals of 99-101% were obtained for model compounds at pH 5-7, 0.05-0.5 M H₂O₂, and Fe:P molar ratio of 5:1. …

Phosphorus Removal Using Titanium Dioxide Nanoparticles In Wastewater Treatment, Suyoung Choi Mr.

Theses and Dissertations (Comprehensive)

Due to eutrophication caused by nutrients such as phosphorus (P), local surface water near military garrisons and camps has been deteriorated for several years in the Republic of Korea. Thus, in order to remove excessive P in local fresh water, various size of titanium dioxide (TiO₂) were used.

In the first investigation, TiO₂ mixed bulk powder (particle size > 5µm) showed maximum P removal with pH dependence (higher pH shows lower P removal), that was approximately 27%. To determine adsorption isotherms, Langmuir and Freudlich models were used. The experimental data was better fit by a Langmuir model compared …