Numerical Analysis and Computation Commons^™

Cfd Analysis Of Hydrodynamic Cavitation Through An Orifice: Influence Of Different Inlet Pressures And Number Of Orifice Holes, Lemthong Chanphavong, Vongsavanh Chanthaboune, Keophousone Phonhalath

ASEAN Journal on Science and Technology for Development

Hydrodynamic cavitation (HC) is considered an energy-efficient process with high potential for utilization in many chemical processes. This study presents a computational fluid dynamics (CFD) analysis of cavitating flow through an orifice with a constant flow area. The Reynolds-Averaged Navier-Stokes (RANS) equations, coupled with turbulence and cavitation models, are employed to capture the complex flow behaviors. The effects of inlet pressures and number of orifice-holes on cavitation behavior are investigated. Result of the numerical simulation is validated with the existing experimental data from the literature. The CFD study revealed that cavitation initiates just behind the inlet edge of the orifice …

Ultrasonic Sensor-Based Sound Synthesis Using Raspberry Pi Pico W, Niraj Jaishwal

Williams Honors College, Honors Research Projects

At the intersection of Human Computer Interaction and digital art, this project transforms simple motion into musical expression. It explores an interactive real-time sound synthesis system using ultrasonic sensors to generate continuous audio. The objective is to design a system that maps physical distances into musical parameters such as pitch and amplitude, which will create a responsive audio environment. Two ultrasonic sensors are used in combination with the Raspberry Pi Pico W microcontroller running CircuitPython and Adafruit Audio Hat for real-time sound output. One sensor controls the pitch of the generated tone, while the other controls volume. This enables expressive …

Production Box Cost Estimating Relationships For Dod Avionics, Carla J. Cisneros, Edward D. White, Brandon M. Lucas, Jonathan D. Ritschel, Robert D. Fass, Shawn M. Valentine

Faculty Publications

The authors use historical information obtained from the Cost Assessment Data Enterprise to estimate recurring production unit cost for DoD avionics via cost estimating relationships (CERs). The specific modeled responses include mean unit cost, median unit cost, and the 100th production unit cost (T100) utilizing learning curve theory. For T100, the authors adopt both a multiplicative and an additive error for CER comparison. Recommended CERs consist of the mean unit cost and the T100 utilizing a multiplicative error. Moreover, results reveal that weight has a significant effect on cost as well as a potential underaccounting of real price change or …

Performance Studies Of An Axial Flow Waterjet Pump Using An Unsteady Reynolds-Averaged Navier-Stokes Model, Stephen E. Monroe, Junfeng Wang, Chunlei Liang

Northeast Journal of Complex Systems (NEJCS)

In this study, an Unsteady Reynolds-Averaged Navier-Stokes (URANS) model is demonstrated its suitability for studying the flow and performance of open marine propellers and waterjet pumps. First, the accuracy of the URANS model is validated by studying turbulent flow past counter-rotating propellers (CRPs). Specifically, experimental data from Miller (1976) is employed for comparison against the URANS results. Subsequently, URANS is used to study the flow and performance of an Office of Naval Research (ONR) axial flow waterjet pump (AxWJ-2). Due to the large number of degrees of freedom for both simulations, parallel computations over 80 cores are performed. For the …

Exploring The Transformation Of Sustainable Collective Spaces: A Study From Mlalakuwa Informal Settlement, Jacob Lutta

Tanzania Journal of Engineering and Technology (TJET)

A major challenge in collective space transformation is addressing the complexity of informal urbanisation in developing countries. Using a case study approach, this paper examines the concerns related to a particular informal settlement's sustainable collective space transformation. One of the key findings is that the absence of formal rules and regulations in the development of informal settlements in combination with land-grabbing leads to the absence of open spaces that could be used collectively. It is observed that sustainability in urban development is another body of critical thought that integrates several streams of current urban elements and embodies various conceptions of …

Evaluation Of Business-Driven Reference Architecture For Big Data Analytics Implementation By Public Sector Organizations In Resource-Constrained Setting: A Case Study Of Uganda, Matendo Didas

Tanzania Journal of Engineering and Technology (TJET)

Big Data Analytics (BDA) is a new area at the nexus of agenda, public sector organizations, and government business. It may satisfy the growing need for trustworthy, cost-effective services in the public sector for better, more informed decision-making processes. BDA has been proposed on the planning schedules of several public sector organizations and the government. Therefore, from the previous work, using Uganda as a case study, specifically the Uganda Bureau of Statistics (UBOS), Ministry of Health (MoH), and Ministry of Education and Sports (MoES), this study aims to evaluate a designed Business-Driven Reference Architecture for Big Data Analytics Implementation (BRABDAI) …

Investigation Of Heavy Metal Composition And Associated Health Risks From Selected Groundwater Wells In Temeke, Dar-Es-Salaam, Justin M. Jeremiah

Tanzania Journal of Engineering and Technology (TJET)

Water quality continues to be the challenge to residents in Dar es Salaam due to various anthropogenic activities in the city. This study was conducted to assess groundwater quality by determining concentrations of heavy metals. Both probability and Nonprobability sampling techniques were used to collect samples from 40 groundwater wells in 24 wards of Temeke municipal and analysed using Microwave Plasma Atomic Emission Spectrometer (Agilent 4210 MP-AES) at the Geochemistry Laboratory of the University of Dar es Salaam. Results indicated varying heavy metal concentrations ranging from 0.71 ± 0.08 to 6.64 ± 0.21 mg/l for As, 0.02 ± 0.01 to …

Perona-Malik Diffusion-Driven Regularization For Image Resolution Enhancement In Electrical Capacitance Tomography, Nassor Ally

Tanzania Journal of Engineering and Technology (TJET)

Electrical Capacitance Tomography (ECT) is a non-invasive promising method for monitoring industrial processes, such as oil-gas flow in pipelines and solid-gas flow in pneumatic systems. Despite its potential benefits, ECT generates poor-quality images, often used only for qualitative analysis. A non-linear relationship between measured capacitances and permittivity distribution and the ill-posedness of the sensitivity matrix elements causes this limitation. This hinders the applicability of ECT in monitoring online industrial process applications. This work proposes a reconstruction method based on a nonlinear diffusion function to generate high-quality images from the measured capacitance data from the ECT system. The diffusion regularization functional …

Assessing The Importance Of Air-Decking Blasting In Controlling Bigv At An Open Pit Gold Mine In Tanzania Using Ann Model, Karim R. Baruti

Tanzania Journal of Engineering and Technology (TJET)

Air-decking blasting technique is used to control blast induced ground vibration (BIGV) in several mines including open-pit gold mines located in Tanzania. While the importance of air-deck to control BIGV is practically evident, theoretical models such as BIGV prediction models cannot be used to assess the importance of air-decking. The main objective of this study was to assess the importance of the air-decking blasting technique to control BIGV using the artificial neural network (ANN)Model. To achieve this objective, ANNs were modeled and trained to learn the pattern of data using Multilayer Perception with Back Propagation to predict BIGV. The main …

Effect Of Recommending Users And Opinions On The Network Connectivity And Idea Generation Process, Sriniwas Pandey, Hiroki Sayama

Northeast Journal of Complex Systems (NEJCS)

The growing reliance on online services underscores the crucial role of recommendation systems, especially on social media platforms seeking increased user engagement. This study investigates how recommendation systems influence the impact of personal behavioral traits on social network dynamics. It explores the interplay between homophily, users’ openness to novel ideas, and recommendation-driven exposure to new opinions. Additionally, the research examines the impact of recommendation systems on the diversity of newly generated ideas, shedding light on the challenges and opportunities in designing effective systems that balance the exploration of new ideas with the risk of reinforcing biases or filtering valuable, unconventional …

Representation Learning For Generative Models With Applications To Healthcare, Astronautics, And Aviation, Van Minh Nguyen

Theses and Dissertations

This dissertation explores applications of representation learning and generative models to challenges in healthcare, astronautics, and aviation.

The first part investigates the use of Generative Adversarial Networks (GANs) to synthesize realistic electronic health record (EHR) data. An initial attempt at training a GAN on the MIMIC-IV dataset encountered stability and convergence issues, motivating a deeper study of 1-Lipschitz regularization techniques for Auxiliary Classifier GANs (AC-GANs). An extensive ablation study on the CIFAR-10 dataset found that Spectral Normalization is key for AC-GAN stability and performance, while Weight Clipping fails to converge without Spectral Normalization. Analysis of the training dynamics provided further …

Thermogravimetric Analysis And Chemical Kinetics Of Waste Tires, Mahir Mohammed Said

Tanzania Journal of Engineering and Technology (TJET)

The focus of this paper is to analyse the pyrolysis reaction of waste tires. The pyrolysis was studied experimentally using thermal and chemical kinetics. The tires were pyrolyzed using thermogravimetry at a temperature range of 200 to 600°C, with heating rates of 10, 20, and 50°C/min. The activating energy was observed to increase with increased temperature. The highest activating energy was 101.02 kJ/mol at a heating rate of 50°C/min.

Design And Optimization Of An Azeotropic Distillation Pilot Plant For The Production Of Pure Ethanol, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to design an azeotropic distillation plant using Aspen Plus® V10 software and determine optimal process conditions for producing pure ethanol greater than 95% from pre-concentrated near-azeotropic ethanol-water solution. The non-random two-liquid Redlich-Kwong thermodynamic model was the base method for property analysis and performance prediction. Modelling and simulation of the converged process were conducted for fixed column variables (R = 5, N = 12 and p = 1 atm). Plant operating parameters were varied in the range of 0 to 1 for the pre-heater vapour fraction, 2 to 10 for the column feed plates (NFP), 2 to 6 …

Sol-Gel Synthesis And Microstructure Characterization Of Nio-Tio2 Semiconductor, Godlisten N. Shao

Tanzania Journal of Engineering and Technology (TJET)

NiO-TiO2 is a fascinating p-n semiconducting binary metal oxide with unique electronic and optical properties. The NiO-TiO2 has been synthesized using complicated preparation methods and expensive precursors that hamper their large-scale production. The present study reports the preparation of NiO-TiO2 semiconductor with improved physicochemical properties. NiO-TiO2 samples were prepared through one-pot sol-gel synthesis process followed by sintering of the as-synthesized materials at temperatures ranging from 600 to 1000 °C. The role of thermal treatment and NiO content on the microstructures was exquisitely studied. The microstructure of the NiO-TiO2 samples was examined by Raman spectroscopy, XRD, XRF, SEM-EDAX, high resolution TEM, …

General Hydrogeochemical Characterization Of Groundwater In Coastal Aquifers Of Kilwa Kisiwani Oceanic Island, South East Tanzania, Simon R Melchioly

Tanzania Journal of Engineering and Technology (TJET)

The main objective of this study was to determine the hydrogeochemical processes controlling the groundwater chemistry on the Island and assess its suitability for human consumption and irrigation. The methodology used in the study include hydrogeological assessment of the study area and laboratory analysis for general physico-chemical parameters of groundwater. Other parameters such as Soluble sodium percentage (SSP) or % Na+, Sodium Adsorption Ratio (SAR), Magnesium adsorption ratio (MAR), Residual sodium carbonate (RSC), hydrochemical facies classification, and Water Quality Index (WQI) were calculated using empirical formulae. The effects of salinization of groundwater were classified using the chloride-Bicarbonate (Cl/HCO3) and the …

Study Of The Effects Of Thermal Aging Coupled With Shot-Peening Treatment Of Carbonitrided Din 1.6587 Low Alloy Steel On Retained Austenite And Residual Stresses, Richard J. Katemi

Tanzania Journal of Engineering and Technology (TJET)

This work investigated the effects of thermal aging and shot-peening of carbonitrided 1.6587 steel grade on retained austenite and residual stresses. After carbonitriding samples contained maximum of 0.87% carbon, 0.34% nitrogen and 50 mass. -% retained austenite. Thermal aging conditions investigated were -30°C, 90°C and 150°C while the aging period were 14, 96 and 720 hours. After thermal aging, some of the samples were subjected to shot-peening treatment using standard cut wire shots StD – G3 - 0.6 mm VDFI 8001 with intensity in the range of 0.25 to 0.30 mmA and coverage of 1.00 to 1.24 x 98%. It …

Optimization Pump As Turbine Coupled To A Self-Excited Induction Generator Using Multi-Objective Genetic Algorithm, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

As a way of accelerating the deployment of affordable and clean renewable energy generation technologies, applying a pump working as a turbine coupled to a self-excited induction generator is gaining popularity in various areas including energy recovery and micro hydro systems. However, it is currently challenging to predict the performance of the PAT-SEIG system and there is no agreed-upon rule on the selection of the appropriate system to be installed at a particular site. This paper has presented multi-objective optimization to select the best operating point of the PAT-SEIG system. The results show that the peak efficiencies for the PAT …

Optimal Load Shedding During Service Restoration In Electrical Secondary Distribution Network Based On Reinforcement Learning, Rukia J. Mwifunyi

Tanzania Journal of Engineering and Technology (TJET)

Increased stress in traditional power systems results in blackouts due to voltage instability attributed to a mismatch between available capacity and load demand, especially in distribution networks. Service restoration schemes are designed to return power supply to the affected parts of the networks. The availability of insufficient supply is a complex problem that requires operational experience or an automatic system. The stochastic nature of load demand significantly impacts service restoration as it results in increased restored demand in case a fault occurs during off-peak hours and helps reduce overload if the fault occurs during peak hours. The study adopts an …

Causes And Consequences Of Inefficient Drilling And Blasting In Mine Development Headings: A Case Study Of Hard Rock Gold Mining Operations In Northern Tanzania, George Bennett

Tanzania Journal of Engineering and Technology (TJET)

Despite the introduction of the perimeter blasting technique at the Tulawaka Gold Mine, the mine continued to suffer from an overbreak of mine development headings, with an average overbreak of 24% every 22 m, which is approximately twice the acceptable 10% overbreak. The causes of this problem include ineffective drilling practices and uneven and excessive charging of explosives, resulting in a slightly high powder factor of 3.94 kg/m3 instead of 3.8 kg/m3, as per the design. The problem of overbreak resulted in ore dilution, a longer mine development cycle time and additional costs of approximately US$ 45 per cut, especially …

Evaluation Of Cybersecurity In Remote Working Settings For Mobile Network Operators, Victoria Mahabi

Tanzania Journal of Engineering and Technology (TJET)

Cybersecurity has increasingly been a primary concern to people as technology advances and allows them to work remotely. This study thus evaluated the cybersecurity posture for organisations that have opted for remote working culture, whereas emerging cyber threats, practices to combat them, and appropriate guidelines for managing cyber threats were discussed. The study used a descriptive design with a quantitative approach from 118 information technology personnel working for Tanzania's three major mobile network operators (MNOs). SPSS analysed the collected data. The study revealed that predominant cyber-threats affecting MNOs in remote working include human errors, phishing attacks, malicious domains, denial of …

A 2-D Numerical Model For Evaluating Daylight Penetration In Short Tunnels For Enhanced Driver Safety, Joachim James

Master's Theses

It is commonly assumed that daylight will adequately penetrate short tunnels, leading to the misconception that artificial lighting is unnecessary during the daytime. Past studies revealed higher frequency of crashes in short tunnels and despite that there is lack of national guidelines warranting artificial lighting for short tunnels. Inadequately lit tunnels pose safety risks, while excessive lighting can be costly. Hence, it becomes crucial to investigate the extent of daylight penetration in short tunnels and identify disappearance zones within these tunnels. This research can help determine the necessity of artificial lighting, and which specific areas of the tunnel require lighting. …

Enhancing Rotating Machinery Fault Diagnosis: A Dual-Head Attention Mechanism In Deep Learning Neural Networks, Qing Snyder

Dissertations

Rotating machinery is crucial to production efficiency and safety in manufacturing industries for an extended time. Ensuring machinery reliability necessitates effective diagnostic systems, particularly for rotating bearings, the key components of such equipment. Fault diagnosis in rotating machinery is essential to prevent failures and minimize downtime, thereby playing an important role in industrial operations. The application of advanced neural network techniques in industry has risen recently. Among these, attention-based neural networks, especially the Transformer models, are originally noteworthy for their sequential data handling capability. This research delves into attention-based algorithms for rotating machinery fault diagnosis, signifying a substantial advancement in …

Human System Composite Performance Measures: General Systems Performance Theory Insights, Lawrence Disalvi

Bioengineering Dissertations - Archive

Composite Performance Measures (CPMs) of human performance are widely employed in applications that range from mundane to life-changing, yet they are frequently presented without explanation or reference to theoretical underpinnings. The conceptual soundness of a widely used CPM approach, based on additive combination of constituent components, has been called into question by Kondraske. He argues the relevance of General Systems Performance Theory (GSPT) and performance capacity envelope concepts when applied to multidimensional CPM measures.

To obtain evidence-based answers to assertions regarding CPM types and rationale employed in medical and non-medical contexts, a Systematic Descriptive Review was conducted. Separately, the GSPT-based …

Advancements In Elliptic Mesh Redistribution And Automated Overset Grid Generation For Computational Fluid Dynamics, Chase Ashby

Theses and Dissertations--Mathematics

Automated and robust structured curvilinear overset grid generation remains a significant challenge for the application of computational fluid dynamics. This thesis intro- duces a specialized anisotropic Mach cone aligned adaptation algorithm for low-boom simulations and an automated procedure for generating structured curvilinear overset grids for immersed boundary simulations. Results demonstrate that anisotropic mesh adaptation can reduce computational resource usage by over 50% while maintaining sonic boom prediction accuracy across the entire sonic boom domain compared to user-constructed Mach cone aligned grids. The proposed immersed overset grid gen- eration procedure eliminates the need for complex surface generation algorithms, producing grids suitable …

Determination Of Spore Viability In Concrete Across Several Factors Using Most Probable Number, Samuel Boyer

Williams Honors College, Honors Research Projects

To determine the lowest concentration of spore added to polyurethane-cement composite (PUCCO) particles that can still germinate after curing in concrete. This research project is a small addition to the larger research project being undertaken by Mirza Mohammed Rashiduzzaman for his Masters. The larger project involves the use of fungal spores added in concrete to act as a self-healing component when cracks form in the concrete structure over time. These spores are suspended in a protective oil and loaded into small, hardened sponge-like PUCCO cubes to act as growth points when water and air can reach the PUCCO in the …

Mathematical Modeling Of Coupled Heat And Mass Transfer In Metal-Hydride Hydrogen Storage Systems, Muhammad Hasnain

College of Graduate Studies: Theses & Dissertations

As a promising clean energy carrier hydrogen has recently gained significant interest, but its efficient and safe storage is a major challenge. Compared to the gaseous state and liquid state, metal hydrides (MH) offer a potentially more effective storage approach for hydrogen. However, the main challenge in this approach is the low thermal conductivity of the MH bed that leads to low heat transfer and ultimately to higher charging and discharging times. The purpose of this work is to develop an in-house comprehensive heat and mass transfer model for hydrogen sorption in MH reactors to simulate the dynamic behavior of …

Numerical Modeling Of Thermal Runaway In Lithium-Ion Batteries Using Decomposition Kinetics And Inter-Cell Contact Resistance, Shehzad Khan

College of Graduate Studies: Theses & Dissertations

Lithium-ion batteries (LIBs) are central in numerous high-demand applications due to their high energy density and prolonged cycle life. Despite these advantages, their susceptibility to thermal runaway (TR) poses a significant safety risk, with the potential for catastrophic failures. This study focuses on the thermal behavior of prismatic lithium-ion cells, using a finite volume-based partial differential equation (PDE) solver developed in MATLAB and JULIA to model TR behavior. This solver accurately simulates transient behaviors, convection, diffusion, and source terms across various coordinate systems. By engaging in a series of increasing complex case studies, this research aims to identify the critical …

Simulation Of Wave Propagation In Granular Particles Using A Discrete Element Model, Syed Tahmid Hussan

College of Graduate Studies: Theses & Dissertations

The understanding of Bender Element mechanism and utilization of Particle Flow Code (PFC) to simulate the seismic wave behavior is important to test the dynamic behavior of soil particles. Both discrete and finite element methods can be used to simulate wave behavior. However, Discrete Element Method (DEM) is mostly suitable, as the micro scaled soil particle cannot be fully considered as continuous specimen like a piece of rod or aluminum. Recently DEM has been widely used to study mechanical properties of soils at particle level considering the particles as balls. This study represents a comparative analysis of Voigt and Best …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Motion Simulation And Risk Assessment Of Dropped Objects In Offshore Operations, Hanqi Yu

LSU New Orleans Theses and Dissertations

Subsea pipelines are a cost-effective and reliable way to transport hydrocarbons in offshore oil and gas development. However, dropped objects can pose hazards and cause damage to pipelines. This dissertation briefly introduces the hazards and hidden dangers caused by dropped containers, discusses motion simulation methods for different object shapes, and reviews risk assessment procedures for handling dropped objects in offshore operations. Ongoing research at the University of New Orleans' towing tank on dropped container models is also discussed. Using ANSYS Fluent, we simulate trajectories of container models and calculate relevant hydrodynamic coefficients for different dropped angles. We then apply risk …