Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics Commons™

Open Access. Powered by Scholars. Published by Universities.®

Theses and Dissertations

Discipline
Institution
Keyword
Publication Year
File Type

Articles 8221 - 8250 of 8799

Full-Text Articles in Physical Sciences and Mathematics

An Application Of The Object-Oriented Paradigm To A Flight Simulator, Dennis J. Simpson Dec 1991

An Application Of The Object-Oriented Paradigm To A Flight Simulator, Dennis J. Simpson

Theses and Dissertations

This thesis describes the object-oriented software development techniques that were used to analyze, design and implement a flight simulator. The objective of this thesis was to present a comprehensive object-oriented software development methodology and show how it was used in constructing an actual application. An extensive review of current object-oriented practices is presented along with the methods that were used to take the flight simulator from analysis to design and through to implementation. The description of the methodology concentrates upon the design and implementation phases of the object-oriented software lifecycle. Examples from the design of the flight simulator demonstrate how …

Go to article

A Hybrid Approach To Battlefield Parallel Discrete Event Simulation, Steven R. Soderholm Dec 1991

A Hybrid Approach To Battlefield Parallel Discrete Event Simulation, Steven R. Soderholm

Theses and Dissertations

This thesis describes a method of parallelizing a battlefield discrete event simulation. The method combines elements of conservative time synchronization together with elements of optimistic computation and local rollback on a message passing hardware architecture. The battle simulation features aircraft moving in a battle area and launching missiles at enemy aircraft. Aircraft are randomly grouped into logical process (LPs), and a single LP is assigned to each processor. Aircraft state information is replicated across all LPs. Only the LP with the minimum next event time can execute safely. While one LP is executing safely all other LPs are precomputing their …

Go to article

A Cache Design To Exploit Structural Locality, Curtis M. Winstead Dec 1991

A Cache Design To Exploit Structural Locality, Curtis M. Winstead

Theses and Dissertations

A design and VHDL implementation of a content-addressable memory (CAM) to exploit structural locality is the subject of this research. The concept of structural locality is that memory locations are referenced in the same order as they were previously referenced. Therefore, if memory locations that exhibit structural locality can be made available to the CPU (Center Processing Unit) through a fast data store, an increase in speed of the computer system can be realized. The CAM's purpose is to store memory references in the order they were used by the CPU and prefetch these locations to a smaller on- chip …

Go to article

Parallelizing Serial Code For A Distributed Processing Environment With An Application To High Frequency Electromagnetic Scattering, Paul R. Work Dec 1991

Parallelizing Serial Code For A Distributed Processing Environment With An Application To High Frequency Electromagnetic Scattering, Paul R. Work

Theses and Dissertations

This thesis investigates the parallelization of existing serial programs in computational electromagnetics for use in a parallel environment. Existing Algorithms for calculating the radar cross section of a object are covered, and a ray-tracing code is chosen for implementation on a parallel machine. Current parallel architectures are introduced and a suitable parallel machine is selected for the implementation of the chosen ray tracing algorithm. The standard techniques for the parallelization of serial code are discussed, including load balancing and decomposition considerations, and appropriate methods for the parallelization effort are selected. A load balancing algorithm is modified to increase the efficiency …

Go to article

Formalization And Validation Of An Sadt Specification Through Executable Simulation In Vhdl, Daniel L. Eickmeier Dec 1991

Formalization And Validation Of An Sadt Specification Through Executable Simulation In Vhdl, Daniel L. Eickmeier

Theses and Dissertations

Formalizing an informal requirements specification, such as SADT, and executing the formal specification in a simulation environment, such as VHDL, provides a requirements analyst a means to validate the behavior of a specification early in the development life cycle. This research effort investigated and demonstrated the feasibility and benefit of transforming an SADT specification of a system into an equivalent VHDL executable simulation. Both non-time related behavior and concurrent, real-time related behavior is addressed. First, a decision table extension to SADT is created so that detailed, executable behavior can be specified. Next a mapping from SADT to VHDL is defined. …

Go to article

Lqg Control Of A Deformable Mirror Adaptive Optics System With Time- Delayed Measurements, David J. Anderson Dec 1991

Lqg Control Of A Deformable Mirror Adaptive Optics System With Time- Delayed Measurements, David J. Anderson

Theses and Dissertations

This thesis proposes a linear quadratic Gaussian (LQG) control law for a ground-based deformable mirror adaptive optics system. The incoming image wavefront is distorted, primarily in phase, due to the turbulent effects of the earth's atmosphere. The adaptive optics system attempts to compensate for the distortion with a deformable mirror. A Hartman wavefront sensor measures the degree of distortion in the image wavefront. The measurements are input to a Kalman filter which estimates the system states. The state estimates are processed by a linear quadratic regulator which generates the appropriate control voltages to apply to the deformable mirror actuators. The …

Go to article

Robotic Tactile Sensors Fabricated From A Monolithic Silicon Integrated Circuit And A Piezoelectric Polyvinylidene Fluoride Thin Film, Craig S. Dyson Dec 1991

Robotic Tactile Sensors Fabricated From A Monolithic Silicon Integrated Circuit And A Piezoelectric Polyvinylidene Fluoride Thin Film, Craig S. Dyson

Theses and Dissertations

The purpose of this research effort was to design, fabricate, and test a tactile sensor system consisting of an external high impedance switch circuit, an external multiplexing circuit, and a tactile sensor IC. In order to accomplish this objective, a hardware design and selection process was implemented along with a logical test methodology. An external multiplexer circuit samples all of the array elements in 50 ms. The current prototype sensor has linearity spanning loads of 0.8 g to 135 g, a load resolution of 20 g, and a maximum bandwidth of 25 Hz. Using an elementary shape recognition algorithm the …

Go to article

A Rigorous Uniform Diffraction Analysis Of The Electromagnetic Scattering From Impedance Edges And Junctions, Joseph C. Fortney Dec 1991

A Rigorous Uniform Diffraction Analysis Of The Electromagnetic Scattering From Impedance Edges And Junctions, Joseph C. Fortney

Theses and Dissertations

This paper investigates the scattering from impedance strips and impedance-loaded conducting strips. The impedance strips are analyzed using Senior's impedance half plane formulation. Once the primary diffraction from the impedance half plane is presented, it is used to develop multiple diffraction mechanisms on an impedance strip. The scattering from impedance-loaded strips are analyzed using Maliuzhinets' impedance wedge formulation. The primary diffraction mechanism from an impedance wedge is used to develop the multiple diffractions on an impedance double wedge. The multiple diffractions on both types of strips are developed using the Extended Spectral Ray Method. Sample calculations are made for impedance …

Go to article

Control Of A Large Flexible Space Structure Using Multiple Model Adaptive Algorithms, John A. Gustafson Dec 1991

Control Of A Large Flexible Space Structure Using Multiple Model Adaptive Algorithms, John A. Gustafson

Theses and Dissertations

The development and performance of moving-bank multiple model adaptive estimation (MMAE) and control (MMAC) algorithms for quelling vibrations induced in the SPICE 2 space structure are analyzed in this thesis. The structure consists of a large platform and a smaller platform connected by three legs in a tripod fashion. The model supplied by Phillips Laboratory, Kirtland AFB is used to develop a truth model and multiple reduced ordered filter models. The filter models are developed from modal analysis and internally balanced techniques. Deviations of the line-of-sight vector from the center of the large platform to the center of the smaller …

Go to article

Design And Testing Of A Lightweight, Planar Microwave Lens, Paul M. Proudfoot Dec 1991

Design And Testing Of A Lightweight, Planar Microwave Lens, Paul M. Proudfoot

Theses and Dissertations

This thesis documents the design, fabrication, and testing of a lightweight, planar microwave lens. The lens consists of two planar arrays of lightweight printed circuit antennas interconnected by microstrip lines whose length varies as a function of position on the lens. Microwave energy is coupled from one face of the lens to the other by means of a slot etched in the ground plane. At 8.0 GHz the lens is ten wavelengths across, is less than 1/8 inch thick, and weighs less than 4 pounds. The lens can scan a beam over a ± 30 degree region in both the …

Go to article

Design Of A Fiber Optic Image Transmission Link, Justin D. Redd Dec 1991

Design Of A Fiber Optic Image Transmission Link, Justin D. Redd

Theses and Dissertations

An original design is presented for a fiber optic based digital image transmission link operating at a serial bit rate of 250 Mbits/Second. The link is designed as an integral part of an airborne infrared imaging system with particular emphasis on avoiding problems associated with aircraft electromagnetic interference (EMI). Unique features include simplicity (single PC board transmitter and receiver), low power, low cost (under $3,000), and use of the latest off-the-shelf components (including the Gazelle GA9011/GA9012 HOT ROD chip set). Theoretical modeling is used to predict a bit error rate of better than 10-15, while actual measurements include …

Go to article

Sensing Refractive Turbulence Profiles Using Wave Front Slope Measurements From Two Reference Sources, Michael D. Rejack Dec 1991

Sensing Refractive Turbulence Profiles Using Wave Front Slope Measurements From Two Reference Sources, Michael D. Rejack

Theses and Dissertations

This thesis examines a remote sensing technique for measuring the atmospheric structure constant as a function of altitude by performing spatial correlation or wavefront sensor measurements. Two point sources are used to irradiate two wavefront sensors in the aperture plane of an optical system. The geometric relationship between the sources and the sensors gives rise to crossed optical paths. At the point where the paths cross, the correlation value of the turbulence contributions will be at a peak. The correlation is shown to be mathematically related to the structure constant in terms of an integral of the structure constant multiplied …

Go to article

Image Segmentation Using Affine Wavelets, Steven E. Smiley Dec 1991

Image Segmentation Using Affine Wavelets, Steven E. Smiley

Theses and Dissertations

This thesis discusses the use of the multiresolution representation and Radial Basis Function (RBF) neural networks to segment both FLIR and SAR imagery. The multiresolution approximation coefficients are used as features into the RBF network which learns to distinguish between different cultural and natural regions or objects. The wavelets used are Mallat's spline wavelet and Daubechies' compactly supported wavelets. Additionally, this thesis provides an explanation of wavelets in a tutorial manner. It introduces wavelet theory and discusses two different approaches to generating the multiresolution or wavelet representation.

Go to article

Face Recognition With The Karhunen-Loeve Transform, Pedro F. Suarez Dec 1991

Face Recognition With The Karhunen-Loeve Transform, Pedro F. Suarez

Theses and Dissertations

The major goal of this research was to investigate machine recognition of faces. The approach taken to achieve this goal was to investigate the use of Karhunen-Loe've Transform (KLT) by implementing flexible and practical code. The KLT utilizes the eigenvectors of the covariance matrix as a basis set. Faces were projected onto the eigenvectors, called eigenfaces, and the resulting projection coefficients were used as features. Face recognition accuracies for the KLT coefficients were superior to Fourier based techniques. Additionally, this thesis demonstrated the image compression and reconstruction capabilities of the KLT. This theses also developed the use of the KLT …

Go to article

Real Imagery As A Three Dimensional Display, Juan C. Echeverry Dec 1991

Real Imagery As A Three Dimensional Display, Juan C. Echeverry

Theses and Dissertations

This research effort implemented two 3-D display designs to assess their performance and effect on an observer's depth perception. Both 3-D displays produced real images for the observer to view. The first display setup combined a lens relay with a two concave mirror projector. The second display setup combined the two concave mirror projector with a diffuser. The lens relay/ two concave mirror projector combination was successful in imaging a source from the CRT to a point in space above the two mirror system. The problem was that the observer could not assess the image location by just looking at …

Go to article

An Investigation Of The Application Of Artificial Neural Networks To Adaptive Optics Imaging Systems, Andrew H. Suzuki Dec 1991

An Investigation Of The Application Of Artificial Neural Networks To Adaptive Optics Imaging Systems, Andrew H. Suzuki

Theses and Dissertations

Recurrent and feedforward artificial neural networks are developed as wavefront reconstructors. The recurrent neural network studied is the Hopfield neural network and the feedforward neural network studied is the single layer perceptron artificial neural network. The recurrent artificial neural network input features are the wavefront sensor slope outputs and neighboring actuator feedback commands. The feedforward artificial neural network input features are just the wavefront sensor slope outputs. Both artificial neural networks use their inputs to calculate deformable mirror actuator commands. The effects of training are examined.

Go to article

Performance Analysis Of The Speckle Holography Image Reconstruction Technique, Rudolf N. Vonniederhausern Dec 1991

Performance Analysis Of The Speckle Holography Image Reconstruction Technique, Rudolf N. Vonniederhausern

Theses and Dissertations

In speckle holography, short exposures frames along with wave front measurements allow post processing image reconstruction. With speckle holography the amplitude of high spatial frequencies is boosted to allow resolution out to the diffraction limit of the telescope. To provide system parameters for the wave front sensor design, a software analysis program has been developed that provides the system transfer function as a function of the number and size of sensor subapertures and sensor noise. Trends in the ratio of the atmospheric coherence diameter to wave front subaperture size and the effect on the system transfer function have been obtained. …

Go to article

Optical Image Segmentation Using Wavelet Correlation, Steven D. Pinski Dec 1991

Optical Image Segmentation Using Wavelet Correlation, Steven D. Pinski

Theses and Dissertations

This research introduces an optical method of segmenting potential targets using wavelet analysis. Implementation of an optical Harr wavelet is fulfilled using a magneto-optic spatial light modulator (MOSLM). Two methods of controlling wavelet dilation are explored: (1) spatial filtering of a ternary modulated MOSLM; (2) a single aperture positioned in front of a binary modulated MOSLM. Segmentation is performed through Vander Lugt correlation of a binarized image with a binarized optical wavelet. Three different image binarization methods are investigated for use in the correlation scheme: (1) average pixel value over an entire scene; (2) localized 4 x 4 pixel average …

Go to article

Low Temperature Photoluminescence Study Of Silicon-Germanium Alloy Superlattices, Maxwell M. Chi Dec 1991

Low Temperature Photoluminescence Study Of Silicon-Germanium Alloy Superlattices, Maxwell M. Chi

Theses and Dissertations

Low temperature photoluminescence studies were performed on nine silicon germanium alloy superlattice samples. The luminescence spectra showed sharp peaks in the 0.95 to 1.05 eV energy range, and a broad band located 0.05 to 0.12 eV below the alloy bandgap. The sharp peaks were identified as transitions associated with impurity bound excitons. The linewidth was about 10 times that in pure silicon; in addition, the peaks shifted to lower energy as the sample temperature was raised from 1.4 to 15 K. These features were attributed to effects of random distribution of atoms in the alloy. The broad band shifted to …

Go to article

An Analysis Of One-Dimensional Models Of The Insulating And Conducting Priz, Joseph W. Cook Iii Dec 1991

An Analysis Of One-Dimensional Models Of The Insulating And Conducting Priz, Joseph W. Cook Iii

Theses and Dissertations

This study attempted to analytically reproduce experimental and analytical data, on the single-insulated and conducting PRIZ, presented in 1987 and 1988 by the Soviet scientists Bliznetsov et al. Our onedimensional analytical models, derived from earlier Soviet reports, have consistently reproduced previously reported data on the PRIZ. In this study, the same codes were successfully used to analyze the effects of injection at high and low intensity exposures (30 µW/cm2 to 500 mW/cm2) Although the codes qualitatively duplicated the nature of the space charge distribution in the single-insulated and conducting PRIZ, our quantitative results were significantly different from …

Go to article

Photoluminescence Spectroscopy Of Mbe Grown Gallium Antimonide, John A. Dorian Dec 1991

Photoluminescence Spectroscopy Of Mbe Grown Gallium Antimonide, John A. Dorian

Theses and Dissertations

Experimental data are presented for the energy levels of the native acceptor and bound exciton emissions of GaSb grown by MBE and studied with low temperature photoluminescence (PL) spectroscopy. The undoped GaSb emissions showed a donor-acceptor pair transition with an observed emission peak at 776 meV, a peak at 716 meV usually associated with the ionization level of the acceptor, and bound exciton transitions in the energy range from 796 to 804 meV. Other unidentified peaks were observed at about 805 meV. Temperature and power dependence studies of the acceptor peak confirmed donor-acceptor pair (DAP) behavior. A GaSb sample grown …

Go to article

Silicon Carbide Thin Film Deposition By Reactive Ion-Beam Sputtering, Larry G. Sills Dec 1991

Silicon Carbide Thin Film Deposition By Reactive Ion-Beam Sputtering, Larry G. Sills

Theses and Dissertations

In this study, hydrogenated amorphous silicon carbide thin films were deposited by reactive ion-beam sputtering under varying conditions to determine whether a film's optical properties can be controlled, focusing on refractive index. Using a Kaufman type ion source to sputter a pure silicon target, three distinct series of films were grown. The first series varied the mixture of methane and argon used in the ion-beam. holding all other parameters constant. For the second series the gas mix was fixed, and only the beam energy (beam voltage) was varied. The final series also varied beam energy, but was grown with a …

Go to article

Vibrational Energy Transfer In Bromine Monofluoride, Tim L. Thompson Dec 1991

Vibrational Energy Transfer In Bromine Monofluoride, Tim L. Thompson

Theses and Dissertations

Bromine monofluoride (BrF), an interhalogen molecule, is a prospective chemical laser candidate. This study continues research begun in characterizing radiative and collisional dynamics in BrF. Vibrational energy transfer of BrF is studied using time resolved laser induced fluorescence (LIF) techniques and observing the spectrally resolved emission. First, vibrational transfer induced by the BrF production mix is determined to follow the Montroll- Shuler model and Landau-Teller scaling with a fundamental rate coefficient of kv(1,0) = (4.0) x 10-12 cm3/(molecules seconds). Also, rate coefficients for the rare gases were found to scale with the reduced mass of the collision …

Go to article

Radar System Classification Using Neural Networks, David M. Cameron Dec 1991

Radar System Classification Using Neural Networks, David M. Cameron

Theses and Dissertations

This study investigated methods of improving the accuracy of neural networks in the classification of large numbers of classes. A literature search revealed that neural networks have been successful in the radar classification problem, and that many complex problems have been solved using systems of multiple neural networks. The experiments conducted were based on 32 classes of radar system data. The neural networks were modelled using a program called the Neural Graphics Analysis System. It was found that the accuracy of the individual neural networks could be increased by controlling the number of hidden nodes, the relative numbers of training …

Go to article

Binary Programming Models Of Spatial Pattern Recognition: Applications In Remote Sensing Image Analysis, Thomas G. Reed Dec 1991

Binary Programming Models Of Spatial Pattern Recognition: Applications In Remote Sensing Image Analysis, Thomas G. Reed

Theses and Dissertations

The major purpose of this investigation was to implement subregion allocation objectives using a network model base on an existing subregion allocation binary programming model (Benabdallah and Wright (B&W), 1990), the ultimate goal being the application of subregion allocation concepts towards the spatial analysis of satellite imagery. The multi-objective aspects of subregion allocation can be accomplished via a network formulation, a formulation vastly simpler in complexity than the binary programming models previously used. Without a network programming package that could maintain integral flows, however, deriving the solution was a tiresome task for the user. Nonetheless, several new concepts and advantages …

Go to article

Reducing Requirements Errors Through The Use Of Computer-Aided Software Engineering (Case) Tools And During Requirements Analysis, Marvin B. Key Jr. Dec 1991

Reducing Requirements Errors Through The Use Of Computer-Aided Software Engineering (Case) Tools And During Requirements Analysis, Marvin B. Key Jr.

Theses and Dissertations

This study investigated whether using CASE tools in the requirements analysis phase of software development reduced the software coding errors attributable to requirement analysis. A survey of the population gathered data as to the current practices and efforts in the use of CASE tools. The data was gathered in two groups: a control group and a sample group. The data was analyzed by group and in various combinations to obtain a greater understanding into population trends and tendencies. The results of the research indicate that the Air Force does not use CASE tools to any great extent. Also, error and …

Go to article

A Formal Definition Of The Object-Oriented Paradigm For Requirements Analysis, Andrew D. Boyd Dec 1991

A Formal Definition Of The Object-Oriented Paradigm For Requirements Analysis, Andrew D. Boyd

Theses and Dissertations

This paper develops a formal definition of the Object-Oriented paradigm for requirements analysis. The literature was surveyed for both formal and informal methods for conducting an Object-Oriented Requirements Analysis (OORA). The informal methods reviewed are: Bailin's, Shlaer and Mellor's, Booch's, and Coad and Yourdon's. The formal methods reviewed are: Bralick's, Z, and REFINE. None of the methods were found to be adequate for doing an OORA. A formal definition of an OORA, based on the concept of classes, is developed. The definition itself is presented as set and relation theory. A supporting graphical representation is also developed and presented. The …

Go to article

Investigative Search Of Quality Historical Software Support Cost Data And Software Support Cost-Related Data, Brent L. Barber Dec 1991

Investigative Search Of Quality Historical Software Support Cost Data And Software Support Cost-Related Data, Brent L. Barber

Theses and Dissertations

The purpose of the study was to determine what software support cost data and software support cost-related data should and can be collected by the Air Force. In addition, the study was to determine how the subject data should be collected. The collection of this data is necessary in order to measure the accuracy and calibration requirements of the software support cost models used by the Air Force. The study found there was no standard set of data items, and no standard procedures in place for the collection of this data. In most cases data were available or easily accessible, …

Go to article

Structured Hypermedia Application Development Model (Shadm): A Structured Model For Technical Documentation Application Design, Peter W. Cassell Dec 1991

Structured Hypermedia Application Development Model (Shadm): A Structured Model For Technical Documentation Application Design, Peter W. Cassell

Theses and Dissertations

This research was conducted to determine how a Royal Australian Air Force technical maintenance publication could be transformed into a task oriented hypermedia application and to develop a model that could be used for future similar transformations. The model was developed following in-depth analysis of the existing USAF F-15E maintenance publication set and validation was conducted using a prototype developed in HyperWriter, a commercial hypermedia product. The prototype model was based around the performance of three maintenance tasks on an aircraft sub-subsystem and incorporated online user access to the necessary support data for task completion. Publication managers, producers, and users …

Go to article

Relative Utility Of Selected Software Requirement Metrics, James H. Byers Dec 1991

Relative Utility Of Selected Software Requirement Metrics, James H. Byers

Theses and Dissertations

The objective of this study was to determine the relative utility of selected software requirement metrics in assessing the productivity of the software requirements analysis process and the quality of the products of this process. This objective was met by collecting information about the perceptions that practicing software professionals have of the usefulness of various requirement metrics. The study employed a two part methodology. The first part utilized Basili's goal/question/metric paradigm to identify specific goals of the measurement effort and to identify requirement metrics worthy of further investigation. The second part employed a typical research design to gather perceptions that …

Go to article

First Prev Next Last